GENERIC revision 1.86 1 # $NetBSD: GENERIC,v 1.86 2006/11/11 18:47:11 jmmv Exp $
2 #
3 # GENERIC machine description file
4 #
5 # This machine description file is used to generate the default NetBSD
6 # kernel. The generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
8 #
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
11 #
12 # For further information on compiling NetBSD kernels, see the config(8)
13 # man page.
14 #
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
19 # device.
20
21 include "arch/netwinder/conf/std.netwinder"
22
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25 # estimated number of users
26
27 maxusers 32
28
29 # Standard system options
30
31 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT
32 #options NTP # NTP phase/frequency locked loop
33
34 # Enable experimental buffer queue strategy for better responsiveness under
35 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
36 #options BUFQ_READPRIO
37 #options BUFQ_PRIOCSCAN
38
39 # CPU options
40
41 # For StrongARM systems
42 options CPU_SA110 # Support the SA110 core
43 makeoptions CPUFLAGS="-march=armv4 -mtune=strongarm"
44
45 # FPA options
46
47 #options ARMFPE # ARM Ltd FPE
48
49 # Default console is wscons, if igsfb(4) and pckbc(4) are configured,
50 # or com(4) otherwise. You can force a serial console with these options
51 #options CONSDEVNAME="\"com\"",CONCOMADDR=0x3f8,CONSPEED=115200
52
53
54 # File systems
55
56 file-system FFS # UFS
57 #file-system LFS # log-structured file system
58 file-system MFS # memory file system
59 file-system NFS # Network file system
60 #file-system ADOSFS # AmigaDOS-compatible file system
61 file-system EXT2FS # second extended file system (linux)
62 #file-system CD9660 # ISO 9660 + Rock Ridge file system
63 file-system MSDOSFS # MS-DOS file system
64 file-system FDESC # /dev/fd
65 file-system KERNFS # /kern
66 file-system NULLFS # loopback file system
67 #file-system PORTAL # portal filesystem (still experimental)
68 file-system PROCFS # /proc
69 #file-system UMAPFS # NULLFS + uid and gid remapping
70 #file-system UNION # union file system
71 file-system PTYFS # /dev/pts/N support
72 #file-system TMPFS # Efficient memory file-system
73 #file-system UDF # experimental - OSTA UDF CD/DVD file-system
74
75 # File system options
76 #options QUOTA # UFS quotas
77 #options FFS_EI # FFS Endian Independant support
78 #options FFS_NO_SNAPSHOT # No FFS snapshot support
79 options NFSSERVER
80 options SOFTDEP
81 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
82
83 # Networking options
84
85 #options GATEWAY # packet forwarding
86 options INET # IP + ICMP + TCP + UDP
87 options INET6 # IPV6
88 #options IPSEC # IP security
89 #options IPSEC_ESP # IP security (encryption part; define w/ IPSEC)
90 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
91 #options IPSEC_DEBUG # debug for IP security
92 #options MROUTING # IP multicast routing
93 #options PIM # Protocol Independent Multicast
94 #options ISO,TPIP # OSI
95 #options EON # OSI tunneling over IP
96 #options NETATALK # AppleTalk networking
97 #options PFIL_HOOKS # pfil(9) packet filter hooks
98 #options PPP_BSDCOMP # BSD-Compress compression support for PPP
99 #options PPP_DEFLATE # Deflate compression support for PPP
100 #options PPP_FILTER # Active filter support for PPP (requires bpf)
101 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
102
103 #options ALTQ # Manipulate network interfaces' output queues
104 #options ALTQ_BLUE # Stochastic Fair Blue
105 #options ALTQ_CBQ # Class-Based Queueing
106 #options ALTQ_CDNR # Diffserv Traffic Conditioner
107 #options ALTQ_FIFOQ # First-In First-Out Queue
108 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
109 #options ALTQ_HFSC # Hierarchical Fair Service Curve
110 #options ALTQ_LOCALQ # Local queueing discipline
111 #options ALTQ_PRIQ # Priority Queueing
112 #options ALTQ_RED # Random Early Detection
113 #options ALTQ_RIO # RED with IN/OUT
114 #options ALTQ_WFQ # Weighted Fair Queueing
115
116 options NFS_BOOT_BOOTP
117 options NFS_BOOT_DHCP
118 #options NFS_BOOT_BOOTPARAM
119
120 # Compatibility options
121
122 #options COMPAT_43 # 4.3BSD compatibility.
123 options COMPAT_30 # NetBSD 3.0 compatibility.
124 options COMPAT_20 # NetBSD 2.0 compatibility.
125 options COMPAT_16 # NetBSD 1.6 compatibility.
126 options COMPAT_15 # NetBSD 1.5 compatibility.
127 options COMPAT_14 # NetBSD 1.4 compatibility.
128 #options COMPAT_13 # NetBSD 1.3 compatibility.
129 #options COMPAT_12 # NetBSD 1.2 compatibility.
130 #options COMPAT_11 # NetBSD 1.1 compatibility.
131 #options COMPAT_10 # NetBSD 1.0 compatibility.
132 #options COMPAT_09 # NetBSD 0.9 compatibility.
133 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
134
135 options COMPAT_LINUX # binary compatibility with Linux
136 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
137
138 # Shared memory options
139
140 options SYSVMSG # System V-like message queues
141 options SYSVSEM # System V-like semaphores
142 #options SEMMNI=10 # number of semaphore identifiers
143 #options SEMMNS=60 # number of semaphores in system
144 #options SEMUME=10 # max number of undo entries per process
145 #options SEMMNU=30 # number of undo structures in system
146 options SYSVSHM # System V-like memory sharing
147 options SHMMAXPGS=1024 # 1024 pages is the default
148 options P1003_1B_SEMAPHORE # p1003.1b semaphore support
149
150 # Device options
151
152 #options MEMORY_DISK_HOOKS # boottime setup of ramdisk
153 #options MEMORY_DISK_ROOT_SIZE=3400 # Size in blocks
154 #options MEMORY_DISK_IS_ROOT # use memory disk as root
155
156 # Miscellaneous kernel options
157 options KTRACE # system call tracing, a la ktrace(1)
158 #options SYSTRACE # system call vetting via systrace(1)
159 options IRQSTATS # manage IRQ statistics
160 #options LKM # loadable kernel modules
161 #options KMEMSTATS # kernel memory statistics
162 #options SCSIVERBOSE # Verbose SCSI errors
163 options PCIVERBOSE # Verbose PCI descriptions
164 options MIIVERBOSE # Verbose MII autoconfuration messages
165 #options PCI_CONFIG_DUMP # verbosely dump PCI config space
166 #options DDB_KEYCODE=0x40
167 options USERCONF # userconf(4) support
168 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
169 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
170
171 # Development and Debugging options
172
173 #options ARM700BUGTRACK # track the ARM700 swi bug
174 #options PORTMASTER # Enable PortMaster only options
175 #options DIAGNOSTIC # internally consistency checks
176 #options PMAP_DEBUG # Enable pmap_debug_level code
177 #options IPKDB # remote kernel debugging
178 options DDB # in-kernel debugger
179 options DDB_HISTORY_SIZE=100 # Enable history editing in DDB
180 makeoptions DEBUG="-g" # compile full symbol table
181 options SYMTAB_SPACE=480000
182
183 config netbsd root on ? type ?
184
185 # The main bus device
186 mainbus0 at root
187
188 # The boot CPU
189 cpu0 at mainbus?
190
191 # Core logic
192 footbridge0 at mainbus?
193
194 # footbridge uart
195 #fcom0 at footbridge?
196
197 # system clock via footbridge
198 #clock* at footbridge?
199
200 # PCI bus via footbridge
201 pci0 at footbridge? # PCI bus
202
203 # ISA bus support
204 pcib* at pci? dev ? function ? # ISA bridge
205 isa* at pcib?
206
207
208 # PCI IDE Controllers and Devices
209 # PCI IDE controllers - see pciide(4) for supported hardware.
210 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
211 # how to set up DMA modes for this chip. This may work, or may cause
212 # a machine hang with some controllers.
213 #pciide* at pci? dev ? function ? flags 0x0000 # GENERIC pciide driver
214 slide* at pci? dev ? function ? # Symphony Labs IDE controllers
215
216 # ATA (IDE) bus support
217 atabus* at ata?
218
219 # IDE drives
220 # Flags are used only with controllers that support DMA operations
221 # and mode settings (e.g. some pciide controllers)
222 # The lowest order four bits (rightmost digit) of the flags define the PIO
223 # mode to use, the next set of four bits the DMA mode and the third set the
224 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
225 # to use, and the last bit must be 1 for this setting to be used.
226 # For DMA and UDMA, 0xf (1111) means 'disable'.
227 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
228 # (0xc=1100, 0xa=1010, 0xf=1111)
229 # 0x0000 means "use whatever the drive claims to support".
230 wd* at atabus? drive ? flags 0x0000 # the drives themselves
231
232 # PCI network interfaces
233 ne* at pci? dev ? function ? # NE2000 compat ethernet
234 tlp* at pci? dev ? function ? # DECchip 21x4x (and clones) Ethernet
235 options TLP_MATCH_21142
236
237 # MII/PHY support
238 icsphy* at mii? phy ? # ISC-189x PHYs
239 ukphy* at mii? phy ? # generic unknown PHYs
240
241
242 # WSCONS Support
243 options WSEMUL_VT100 # VT100 / VT220 emulation
244
245 # customization of console and kernel output - see dev/wscons/wsdisplayvar.h
246 options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8)
247 #options WS_DEFAULT_FG=WSCOL_WHITE
248 #options WS_DEFAULT_BG=WSCOL_BLACK
249 #options WS_DEFAULT_COLATTR="(0)"
250 #options WS_DEFAULT_MONOATTR="(0)"
251 options WS_KERNEL_FG=WSCOL_GREEN
252 #options WS_KERNEL_BG=WSCOL_BLACK
253 options WS_KERNEL_COLATTR=WSATTR_HILIT
254 #options WS_KERNEL_MONOATTR="(0)"
255
256 # compatibility to other console drivers
257 options WSDISPLAY_COMPAT_PCVT # emulate some ioctls
258 options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
259 options WSDISPLAY_COMPAT_USL # VT handling
260 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
261
262 options FONT_GALLANT12x22 # Sun PROM font look-alike
263
264 pckbc0 at isa?
265 pckbd* at pckbc?
266 wskbd* at pckbd? console ?
267 pms* at pckbc?
268 wsmouse* at pms? mux 0
269
270 igsfb* at pci? dev ? function ?
271 wsdisplay* at igsfb? console ?
272
273
274 # ISA Devices
275 com0 at isa? port 0x3f8 irq 4
276 lpt0 at isa? port 0x378 irq 7
277
278
279 # Audio Devices
280
281 # ISA audio devices
282 sb0 at isa? port 0x220 irq 3 drq 1 drq2 7 # SoundBlaster
283 opl* at sb?
284 mpu* at sb?
285 midi* at sb? # SB1 MIDI port
286
287 # Audio support
288 audio* at sb?
289
290 # Pseudo-Devices
291
292 pseudo-device crypto # /dev/crypto device
293 pseudo-device swcrypto # software crypto implementation
294
295 # disk/mass storage pseudo-devices
296 #pseudo-device md 1 # memory disk device (ramdisk)
297 pseudo-device vnd # disk-like interface to files
298 #options VND_COMPRESSION # compressed vnd(4)
299 pseudo-device fss 4 # file system snapshot device
300 #pseudo-device cgd 4 # cryptographic disk devices
301
302 # network pseudo-devices
303 pseudo-device bpfilter # Berkeley packet filter
304 #pseudo-device carp # Common Address Redundancy Protocol
305 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
306 pseudo-device bridge # simple inter-network bridging
307 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
308 pseudo-device loop # network loopback
309
310 # miscellaneous pseudo-devices
311 pseudo-device pty # pseudo-terminals
312 pseudo-device rnd # /dev/random and in-kernel generator
313 pseudo-device clockctl # user control of clock subsystem
314 pseudo-device ksyms # /dev/ksyms
315 #pseudo-device pf # PF packet filter
316 #pseudo-device pflog # PF log if
317
318 # wscons pseudo-devices
319 pseudo-device wsmux # mouse & keyboard multiplexor
320 #pseudo-device wsfont
321
322 # Veriexec
323 #
324 # a pseudo device needed for veriexec
325 #pseudo-device veriexec 1
326 #
327 # Uncomment the fingerprint methods below that are desired. Note that
328 # removing fingerprint methods will have almost no impact on the kernel
329 # code size.
330 #
331 #options VERIFIED_EXEC_FP_RMD160
332 #options VERIFIED_EXEC_FP_SHA256
333 #options VERIFIED_EXEC_FP_SHA384
334 #options VERIFIED_EXEC_FP_SHA512
335 #options VERIFIED_EXEC_FP_SHA1
336 #options VERIFIED_EXEC_FP_MD5
337