xref: /src/sys/arch/news68k/conf/GENERIC

# $NetBSD: GENERIC,v 1.46.2.5 2005/01/17 19:29:58 skrll Exp $
#
# GENERIC machine description file
# 
# This machine description file is used to generate the default NetBSD
# kernel.  The generic kernel does not include all options, subsystems
# and device drivers, but should be useful for most applications.
#
# The machine description file can be customised for your specific
# machine to reduce the kernel size and improve its performance.
#
# For further information on compiling NetBSD kernels, see the config(8)
# man page.
#
# For further information on hardware support for this architecture, see
# the intro(4) man page.  For further information about kernel options
# for this architecture, see the options(4) man page.  For an explanation
# of each device driver in this file see the section 4 man page for the
# device.

include		"arch/news68k/conf/std.news68k"

options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

#ident 		"GENERIC-$Revision: 1.46.2.5 $"

maxusers	8

options 	news1200		# news1200 support
options 	news1700		# news1[4567]00 support
options 	CPU_SINGLE		# Will IOP be supported eventually?
#options 	FPU_EMULATE

# Standard system options
options 	NTP			# NTP phase/frequency locked loop
options 	KTRACE			# system call tracing support
options 	SYSTRACE		# system call vetting via systrace(1)
options 	SYSVMSG			# System V message queues
options 	SYSVSEM			# System V semaphores
#options 	SEMMNI=10		# number of semaphore identifiers
#options 	SEMMNS=60		# number of semaphores in system
#options 	SEMUME=10		# max number of undo entries per process
#options 	SEMMNU=30		# number of undo structures in system
options 	SYSVSHM			# System V shared memory
#options 	SHMMAXPGS=1024		# 1024 pages is the default
options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
options 	LKM			# loadable kernel modules
options 	USERCONF		# userconf(4) support
#options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Enable experimental buffer queue strategy for better responsiveness under
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options 	NEW_BUFQ_STRATEGY

# Debugging options
#options 	DIAGNOSTIC		# extra kernel sanity checking
#options 	DEBUG			# extra kernel debugging support
#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
options 	DDB			# kernel dynamic debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
options 	SCSIVERBOSE		# Verbose SCSI errors
#options 	SCSIDEBUG		# extra SCSI debugging support
#makeoptions	DEBUG="-g"		# compile full symbol table

# Compatibility options
options 	COMPAT_43		# compatibility with 4.3BSD binaries
options 	COMPAT_12		# NetBSD 1.2 binary compatibility
options 	COMPAT_13		# NetBSD 1.3 binary compatibility
options 	COMPAT_14		# NetBSD 1.4 binary compatibility
options 	COMPAT_15		# NetBSD 1.5 binary compatibility
options 	COMPAT_16		# NetBSD 1.6 binary compatibility
options 	COMPAT_20		# NetBSD 2.0 binary compatibility
options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out

#options 	COMPAT_SVR4		# binary compatibility with SVR4
options 	COMPAT_SUNOS		# binary compatibility with SunOS
#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
options 	COMPAT_BSDPTY		# /dev/[pt]ty?? ptys.

#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

# Filesystem options
file-system	FFS		# Berkeley Fast Filesystem
file-system	LFS		# log-structured file system
file-system	NFS		# Sun NFS-compatible filesystem client
file-system	MFS		# memory-based filesystem
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS FAT file system
file-system	KERNFS		# /kern
file-system	PROCFS		# /proc
file-system	FDESC		# /dev/fd/*
file-system	NULLFS		# loopback file system
file-system 	OVERLAY		# overlay file system
file-system	PORTAL		# portal filesystem (still experimental)
file-system	UMAPFS		# NULLFS + uid and gid remapping
file-system	UNION		# union file system
#file-system	CODA		# Coda File System; also needs vcode (below)

options 	NFSSERVER	# nfs server support
options 	QUOTA		# ffs quotas
#options 	FFS_EI		# ffs endian independant support
options 	SOFTDEP		# ffs soft updates support

# Networking options
options 	INET		# Internet protocols
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY		# IP packet forwarding
#options 	MROUTING	# IP multicast routing
#options 	PIM		# Protocol Independent Multicast
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks
options 	IPFILTER_LOG	# ipmon(8) log support
#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

#options 	ALTQ		# Manipulate network interfaces' output queues
#options 	ALTQ_BLUE	# Stochastic Fair Blue
#options 	ALTQ_CBQ	# Class-Based Queueing
#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
#options 	ALTQ_FIFOQ	# First-In First-Out Queue
#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
#options 	ALTQ_LOCALQ	# Local queueing discipline
#options 	ALTQ_PRIQ	# Priority Queueing
#options 	ALTQ_RED	# Random Early Detection
#options 	ALTQ_RIO	# RED with IN/OUT
#options 	ALTQ_WFQ	# Weighted Fair Queueing

options 	NFS_BOOT_BOOTPARAM
options 	NFS_BOOT_DHCP

config	netbsd root on ? type ?
#config	netbsd root on ? type nfs

#
# device declarations
#

mainbus0 at root

# NEWS HYPER-BUS
hb0	at mainbus0 systype NEWS1700
hb1	at mainbus0 systype NEWS1200

# interval timer
timer0	at hb0 addr 0xe1000000 ipl 6			# news1700
timer0	at hb1 addr 0xe1140000 ipl 6			# news1200

# MK48T02 TOD clock
mkclock0 at hb0 addr 0xe0d80000				# news1700
mkclock0 at hb1 addr 0xe1420000				# news1200

# onboard LANCE ethernet
le0	at hb0 addr 0xe0f00000 ipl 4			# news1700
le0	at hb1 addr 0xe1a40000 ipl 4			# news1200

# keyboard/mouse
kbc0	at hb0 addr 0xe0d00000 ipl 5			# news1700
kb0	at kbc0						# news1700
ms0	at kbc0						# news1700

kb0	at hb1 addr 0xe1240000 ipl 5			# news1200
ms0	at hb1 addr 0xe1280000 ipl 5			# news1200

wskbd*	at kb?
wsmouse* at ms?

# onboard z8530 SCC
zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0	# news1700
zsc0	at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1	# news1200
zstty0	at zsc0 channel 0
zstty1	at zsc0 channel 1

# Frame buffer devices; not yet
#fb0	at hb0 addr 0xf0700000			# NWB225
#fb1	at hb0 addr 0xf0f00000			# NWB512

# onboard uPD72067 FDC; not yet
#fdc0	at hb0 addr 0xe0c80000 ipl 3
#fd*	at fdc0

# onboard CXD1180 SCSI controller
#
# This driver has several flags which may be enabled using
# the "flags" directive.  Valid flags are:
#
# 0x000ff	Set (1<<target) to disable disconnect/reselect
# 0x0ff00	Set (1<<(target+8)) to disable parity checking
# 0x10000	Set this bit to disable DMA interrupts (poll)
# 0x20000	Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
#
si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
scsibus* at si0

sd*	at scsibus? target ? lun ?		# SCSI disks
st*	at scsibus? target ? lun ?		# SCSI tapes
cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
ch*	at scsibus? target ? lun ?		# SCSI changer devices
ss*	at scsibus? target ? lun ?		# SCSI scanners
uk*	at scsibus? target ? lun ?		# unknown SCSI devices

# Misc.
pseudo-device	loop			# loopback interface; required
pseudo-device	pty			# pseudo-terminals
pseudo-device	md		1	# memory disk device
pseudo-device	vnd		4	# disk-like interface to files
pseudo-device	ccd		4	# concatenated and striped disks
#pseudo-device	cgd		4	# cryptographic disk devices
pseudo-device	raid		8	# RAIDframe disk driver
#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
# Options to enable various other RAIDframe RAID types.
#options 	RF_INCLUDE_EVENODD=1
#options 	RF_INCLUDE_RAID5_RS=1
#options 	RF_INCLUDE_PARITYLOGGING=1
#options 	RF_INCLUDE_CHAINDECLUSTER=1
#options 	RF_INCLUDE_INTERDECLUSTER=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
pseudo-device	sl		2	# SLIP interfaces
pseudo-device	ppp		2	# PPP interfaces
pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
pseudo-device	tun		4	# Network "tunnel" device
pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	bpfilter	16	# Berkeley Packet Filter
pseudo-device	ipfilter		# ip filter
pseudo-device	strip		1	# Starmode Radio IP (Metricom)
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
pseudo-device	vlan			# IEEE 802.1q encapsulation
pseudo-device	bridge			# simple inter-network bridging
#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
pseudo-device	rnd			# /dev/random and in-kernle generator
#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	ksyms			# /dev/ksyms
#pseudo-device	pf			# PF packet filter
#pseudo-device	pflog			# PF log if