GENERIC revision 1.107
1 # $NetBSD: GENERIC,v 1.107 2011/11/20 15:38:00 tsutsui Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/news68k/conf/std.news68k" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.107 $" 26 27 maxusers 8 28 29 options news1200 # news1200 support 30 options news1700 # news1[4567]00 support 31 options CPU_SINGLE # Will IOP be supported eventually? 32 #options FPU_EMULATE 33 34 # Standard system options 35 options NTP # NTP phase/frequency locked loop 36 options KTRACE # system call tracing support 37 options SYSVMSG # System V message queues 38 options SYSVSEM # System V semaphores 39 options SYSVSHM # System V shared memory 40 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 41 42 #options MODULAR # new style module(7) framework 43 44 options USERCONF # userconf(4) support 45 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48 # Enable experimental buffer queue strategy for better responsiveness under 49 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 50 #options BUFQ_READPRIO 51 #options BUFQ_PRIOCSCAN 52 53 # Debugging options 54 #options DIAGNOSTIC # extra kernel sanity checking 55 #options DEBUG # extra kernel debugging support 56 #options KMEMSTATS # kernel memory statistics (vmstat -m) 57 options DDB # kernel dynamic debugger 58 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 59 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 60 options SCSIVERBOSE # Verbose SCSI errors 61 #options SCSIDEBUG # extra SCSI debugging support 62 #makeoptions DEBUG="-g" # compile full symbol table 63 64 # Compatibility options 65 options COMPAT_43 # compatibility with 4.3BSD binaries 66 options COMPAT_12 # NetBSD 1.2 binary compatibility 67 options COMPAT_13 # NetBSD 1.3 binary compatibility 68 options COMPAT_14 # NetBSD 1.4 binary compatibility 69 options COMPAT_15 # NetBSD 1.5 binary compatibility 70 options COMPAT_16 # NetBSD 1.6 binary compatibility 71 options COMPAT_20 # NetBSD 2.0 binary compatibility 72 options COMPAT_30 # NetBSD 3.0 binary compatibility 73 options COMPAT_40 # NetBSD 4.0 binary compatibility 74 options COMPAT_50 # NetBSD 5.0 binary compatibility 75 options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 76 77 #options COMPAT_SVR4 # binary compatibility with SVR4 78 options COMPAT_SUNOS # binary compatibility with SunOS 79 #options COMPAT_LINUX # binary compatibllity with Linux/m68k 80 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 81 82 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 83 84 # Filesystem options 85 file-system FFS # Berkeley Fast Filesystem 86 file-system LFS # log-structured file system 87 file-system NFS # Sun NFS-compatible filesystem client 88 file-system MFS # memory-based filesystem 89 file-system CD9660 # ISO 9660 + Rock Ridge file system 90 file-system MSDOSFS # MS-DOS FAT file system 91 file-system KERNFS # /kern 92 file-system PROCFS # /proc 93 file-system FDESC # /dev/fd/* 94 file-system NULLFS # loopback file system 95 file-system OVERLAY # overlay file system 96 file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 97 file-system UMAPFS # NULLFS + uid and gid remapping 98 file-system UNION # union file system 99 #file-system CODA # Coda File System; also needs vcode (below) 100 file-system PTYFS # /dev/pts/N support 101 file-system TMPFS # Efficient memory file-system 102 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 103 104 options NFSSERVER # nfs server support 105 options QUOTA # legacy UFS quotas 106 options QUOTA2 # new, in-filesystem UFS quotas 107 #options FFS_EI # ffs endian independent support 108 options WAPBL # File system journaling support - Experimental 109 #options FFS_NO_SNAPSHOT # No FFS snapshot support 110 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 111 112 # Networking options 113 options INET # Internet protocols 114 options INET6 # IPV6 115 #options IPSEC # IP security 116 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 117 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 118 #options IPSEC_DEBUG # debug for IP security 119 #options GATEWAY # IP packet forwarding 120 #options MROUTING # IP multicast routing 121 #options PIM # Protocol Independent Multicast 122 #options ISO,TPIP # OSI 123 #options EON # OSI tunneling over IP 124 #options NETATALK # AppleTalk networking protocols 125 options PPP_BSDCOMP # BSD-Compress compression support for PPP 126 options PPP_DEFLATE # Deflate compression support for PPP 127 options PPP_FILTER # Active filter support for PPP (requires bpf) 128 options PFIL_HOOKS # pfil(9) packet filter hooks 129 options IPFILTER_LOG # ipmon(8) log support 130 options IPFILTER_LOOKUP # ippool(8) support 131 options IPFILTER_COMPAT # Compat for IP-Filter 132 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 133 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 134 135 #options ALTQ # Manipulate network interfaces' output queues 136 #options ALTQ_BLUE # Stochastic Fair Blue 137 #options ALTQ_CBQ # Class-Based Queueing 138 #options ALTQ_CDNR # Diffserv Traffic Conditioner 139 #options ALTQ_FIFOQ # First-In First-Out Queue 140 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 141 #options ALTQ_HFSC # Hierarchical Fair Service Curve 142 #options ALTQ_LOCALQ # Local queueing discipline 143 #options ALTQ_PRIQ # Priority Queueing 144 #options ALTQ_RED # Random Early Detection 145 #options ALTQ_RIO # RED with IN/OUT 146 #options ALTQ_WFQ # Weighted Fair Queueing 147 148 options NFS_BOOT_BOOTPARAM 149 options NFS_BOOT_DHCP 150 151 config netbsd root on ? type ? 152 #config netbsd root on ? type nfs 153 154 # 155 # device declarations 156 # 157 158 mainbus0 at root 159 160 # NEWS HYPER-BUS 161 hb0 at mainbus0 systype NEWS1700 162 hb1 at mainbus0 systype NEWS1200 163 164 # interval timer 165 timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 166 timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 167 168 # MK48T02 TOD clock 169 mkclock0 at hb0 addr 0xe0d80000 # news1700 170 mkclock0 at hb1 addr 0xe1420000 # news1200 171 172 # onboard LANCE ethernet 173 le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 174 le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 175 176 # keyboard/mouse 177 kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 178 kb0 at kbc0 # news1700 179 ms0 at kbc0 # news1700 180 181 kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 182 ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 183 184 wskbd* at kb? 185 wsmouse* at ms? 186 187 # onboard z8530 SCC 188 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 189 zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 190 zstty0 at zsc0 channel 0 191 zstty1 at zsc0 channel 1 192 193 # Frame buffer devices; not yet 194 #fb0 at hb0 addr 0xf0700000 # NWB225 195 #fb1 at hb0 addr 0xf0f00000 # NWB512 196 197 # onboard uPD72067 FDC; not yet 198 #fdc0 at hb0 addr 0xe0c80000 ipl 3 199 #fd* at fdc0 200 201 # onboard CXD1180 SCSI controller 202 # 203 # This driver has several flags which may be enabled using 204 # the "flags" directive. Valid flags are: 205 # 206 # 0x000ff Set (1<<target) to disable disconnect/reselect 207 # 0x0ff00 Set (1<<(target+8)) to disable parity checking 208 # 0x10000 Set this bit to disable DMA interrupts (poll) 209 # 0x20000 Set this bit to disable DMA entirely (use PIO) 210 # 211 # For example: "flags 0x1000f" would disable DMA interrupts, 212 # and disable disconnect/reselect for targets 0-3 213 # 214 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0x0 215 scsibus* at si0 216 217 sd* at scsibus? target ? lun ? # SCSI disks 218 st* at scsibus? target ? lun ? # SCSI tapes 219 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 220 ch* at scsibus? target ? lun ? # SCSI changer devices 221 ss* at scsibus? target ? lun ? # SCSI scanners 222 uk* at scsibus? target ? lun ? # unknown SCSI devices 223 224 # PROM console support 225 #romcons0 at mainbus0 226 227 # 228 # accept filters 229 pseudo-device accf_data # "dataready" accept filter 230 pseudo-device accf_http # "httpready" accept filter 231 232 # Misc. 233 pseudo-device loop # loopback interface; required 234 pseudo-device pty # pseudo-terminals 235 pseudo-device md # memory disk device 236 pseudo-device vnd # disk-like interface to files 237 #options VND_COMPRESSION # compressed vnd(4) 238 pseudo-device ccd 4 # concatenated and striped disks 239 #pseudo-device cgd 4 # cryptographic disk devices 240 pseudo-device raid 8 # RAIDframe disk driver 241 #options RAID_AUTOCONFIG # auto-configuration of RAID components 242 # Options to enable various other RAIDframe RAID types. 243 #options RF_INCLUDE_EVENODD=1 244 #options RF_INCLUDE_RAID5_RS=1 245 #options RF_INCLUDE_PARITYLOGGING=1 246 #options RF_INCLUDE_CHAINDECLUSTER=1 247 #options RF_INCLUDE_INTERDECLUSTER=1 248 #options RF_INCLUDE_PARITY_DECLUSTERING=1 249 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 250 pseudo-device fss # file system snapshot device 251 pseudo-device sl # SLIP interfaces 252 pseudo-device ppp # PPP interfaces 253 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 254 pseudo-device tun # Network "tunnel" device 255 pseudo-device tap # virtual Ethernet 256 pseudo-device gre # generic L3 over IP tunnel 257 pseudo-device bpfilter # Berkeley Packet Filter 258 #pseudo-device carp # Common Address Redundancy Protocol 259 pseudo-device ipfilter # ip filter 260 pseudo-device strip # Starmode Radio IP (Metricom) 261 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 262 #pseudo-device faith # IPv[46] tcp relay translation i/f 263 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 264 pseudo-device vlan # IEEE 802.1q encapsulation 265 pseudo-device bridge # simple inter-network bridging 266 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 267 pseudo-device agr # IEEE 802.3ad link aggregation 268 pseudo-device rnd # /dev/random and in-kernle generator 269 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 270 pseudo-device clockctl # user control of clock subsystem 271 pseudo-device ksyms # /dev/ksyms 272 #pseudo-device pf # PF packet filter 273 #pseudo-device pflog # PF log if 274 pseudo-device putter # for puffs and pud 275 276 # Veriexec 277 # 278 # a pseudo device needed for veriexec 279 #pseudo-device veriexec 1 280 # 281 # Uncomment the fingerprint methods below that are desired. Note that 282 # removing fingerprint methods will have almost no impact on the kernel 283 # code size. 284 # 285 #options VERIFIED_EXEC_FP_RMD160 286 #options VERIFIED_EXEC_FP_SHA256 287 #options VERIFIED_EXEC_FP_SHA384 288 #options VERIFIED_EXEC_FP_SHA512 289 #options VERIFIED_EXEC_FP_SHA1 290 #options VERIFIED_EXEC_FP_MD5 291
Indexes created Thu Oct 02 10:09:58 GMT 2025