GENERIC revision 1.112
1# $NetBSD: GENERIC,v 1.112 2013/03/01 18:25:49 joerg Exp $
2#
3# GENERIC machine description file
4#
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include		"arch/news68k/conf/std.news68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.112 $"
26
27maxusers	8
28
29options 	news1200		# news1200 support
30options 	news1700		# news1[4567]00 support
31options 	CPU_SINGLE		# Will IOP be supported eventually?
32#options 	FPU_EMULATE
33
34# Standard system options
35options 	NTP			# NTP phase/frequency locked loop
36options 	KTRACE			# system call tracing support
37options 	SYSVMSG			# System V message queues
38options 	SYSVSEM			# System V semaphores
39options 	SYSVSHM			# System V shared memory
40
41#options 	MODULAR			# new style module(7) framework
42
43options 	USERCONF		# userconf(4) support
44#options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
45options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
46
47# Enable experimental buffer queue strategy for better responsiveness under
48# high disk I/O load. Use it with caution - it's not proven to be stable yet.
49#options 	BUFQ_READPRIO
50#options 	BUFQ_PRIOCSCAN
51
52# Debugging options
53#options 	DIAGNOSTIC		# extra kernel sanity checking
54#options 	DEBUG			# extra kernel debugging support
55#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
56options 	DDB			# kernel dynamic debugger
57#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
58#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
59options 	SCSIVERBOSE		# Verbose SCSI errors
60#options 	SCSIDEBUG		# extra SCSI debugging support
61#makeoptions	DEBUG="-g"		# compile full symbol table
62
63# Compatibility options
64options 	COMPAT_43		# compatibility with 4.3BSD binaries
65options 	COMPAT_12		# NetBSD 1.2 binary compatibility
66options 	COMPAT_13		# NetBSD 1.3 binary compatibility
67options 	COMPAT_14		# NetBSD 1.4 binary compatibility
68options 	COMPAT_15		# NetBSD 1.5 binary compatibility
69options 	COMPAT_16		# NetBSD 1.6 binary compatibility
70options 	COMPAT_20		# NetBSD 2.0 binary compatibility
71options 	COMPAT_30		# NetBSD 3.0 binary compatibility
72options 	COMPAT_40		# NetBSD 4.0 binary compatibility
73options 	COMPAT_50		# NetBSD 5.0 binary compatibility
74options 	COMPAT_60		# NetBSD 6.0 compatibility.
75options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out
76
77#options 	COMPAT_SVR4		# binary compatibility with SVR4
78options 	COMPAT_SUNOS		# binary compatibility with SunOS
79#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
80options 	COMPAT_BSDPTY		# /dev/[pt]ty?? ptys.
81
82#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
83
84# Filesystem options
85file-system	FFS		# Berkeley Fast Filesystem
86file-system	LFS		# log-structured file system
87file-system	NFS		# Sun NFS-compatible filesystem client
88file-system	MFS		# memory-based filesystem
89file-system	CD9660		# ISO 9660 + Rock Ridge file system
90file-system	MSDOSFS		# MS-DOS FAT file system
91file-system	KERNFS		# /kern
92file-system	PROCFS		# /proc
93file-system	FDESC		# /dev/fd/*
94file-system	NULLFS		# loopback file system
95file-system 	OVERLAY		# overlay file system
96file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
97file-system	UMAPFS		# NULLFS + uid and gid remapping
98file-system	UNION		# union file system
99#file-system	CODA		# Coda File System; also needs vcode (below)
100file-system	PTYFS		# /dev/pts/N support
101file-system	TMPFS		# Efficient memory file-system
102#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
103
104options 	NFSSERVER	# nfs server support
105options 	QUOTA		# legacy UFS quotas
106options 	QUOTA2		# new, in-filesystem UFS quotas
107#options 	FFS_EI		# ffs endian independent support
108options 	WAPBL		# File system journaling support
109#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
110#options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
111
112# Networking options
113options 	INET		# Internet protocols
114options 	INET6		# IPV6
115#options 	IPSEC		# IP security
116#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
117#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
118#options 	IPSEC_DEBUG	# debug for IP security
119#options 	GATEWAY		# IP packet forwarding
120#options 	MROUTING	# IP multicast routing
121#options 	PIM		# Protocol Independent Multicast
122#options 	NETATALK	# AppleTalk networking protocols
123options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
124options 	PPP_DEFLATE	# Deflate compression support for PPP
125options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
126options 	PFIL_HOOKS	# pfil(9) packet filter hooks
127options 	IPFILTER_LOG	# ipmon(8) log support
128options 	IPFILTER_LOOKUP	# ippool(8) support
129options 	IPFILTER_COMPAT # Compat for IP-Filter
130#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
131#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
132
133#options 	ALTQ		# Manipulate network interfaces' output queues
134#options 	ALTQ_BLUE	# Stochastic Fair Blue
135#options 	ALTQ_CBQ	# Class-Based Queueing
136#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
137#options 	ALTQ_FIFOQ	# First-In First-Out Queue
138#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
139#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
140#options 	ALTQ_LOCALQ	# Local queueing discipline
141#options 	ALTQ_PRIQ	# Priority Queueing
142#options 	ALTQ_RED	# Random Early Detection
143#options 	ALTQ_RIO	# RED with IN/OUT
144#options 	ALTQ_WFQ	# Weighted Fair Queueing
145
146options 	NFS_BOOT_BOOTPARAM
147options 	NFS_BOOT_DHCP
148
149config	netbsd root on ? type ?
150#config	netbsd root on ? type nfs
151
152#
153# device declarations
154#
155
156mainbus0 at root
157
158# NEWS HYPER-BUS
159hb0	at mainbus0 systype NEWS1700
160hb1	at mainbus0 systype NEWS1200
161
162# interval timer
163timer0	at hb0 addr 0xe1000000 ipl 6			# news1700
164timer0	at hb1 addr 0xe1140000 ipl 6			# news1200
165
166# MK48T02 TOD clock
167mkclock0 at hb0 addr 0xe0d80000				# news1700
168mkclock0 at hb1 addr 0xe1420000				# news1200
169
170# onboard LANCE ethernet
171le0	at hb0 addr 0xe0f00000 ipl 4			# news1700
172le0	at hb1 addr 0xe1a40000 ipl 4			# news1200
173
174# keyboard/mouse
175kbc0	at hb0 addr 0xe0d00000 ipl 5			# news1700
176kb0	at kbc0						# news1700
177ms0	at kbc0						# news1700
178
179kb0	at hb1 addr 0xe1240000 ipl 5			# news1200
180ms0	at hb1 addr 0xe1280000 ipl 5			# news1200
181
182wskbd*	at kb?
183wsmouse* at ms?
184
185# onboard z8530 SCC
186zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0	# news1700
187zsc0	at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1	# news1200
188zstty0	at zsc0 channel 0
189zstty1	at zsc0 channel 1
190
191# Frame buffer devices; not yet
192#fb0	at hb0 addr 0xf0700000			# NWB225
193#fb1	at hb0 addr 0xf0f00000			# NWB512
194
195# onboard uPD72067 FDC; not yet
196#fdc0	at hb0 addr 0xe0c80000 ipl 3
197#fd*	at fdc0
198
199# onboard CXD1180 SCSI controller
200#
201# This driver has several flags which may be enabled using
202# the "flags" directive.  Valid flags are:
203#
204# 0x000ff	Set (1<<target) to disable disconnect/reselect
205# 0x0ff00	Set (1<<(target+8)) to disable parity checking
206# 0x10000	Set this bit to disable DMA interrupts (poll)
207# 0x20000	Set this bit to disable DMA entirely (use PIO)
208#
209# For example: "flags 0x1000f" would disable DMA interrupts,
210# and disable disconnect/reselect for targets 0-3
211#
212si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0x0
213scsibus* at si0
214
215sd*	at scsibus? target ? lun ?		# SCSI disks
216st*	at scsibus? target ? lun ?		# SCSI tapes
217cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
218ch*	at scsibus? target ? lun ?		# SCSI changer devices
219ss*	at scsibus? target ? lun ?		# SCSI scanners
220uk*	at scsibus? target ? lun ?		# unknown SCSI devices
221
222# PROM console support
223#romcons0 at mainbus0
224
225#
226# accept filters
227pseudo-device   accf_data		# "dataready" accept filter
228pseudo-device   accf_http		# "httpready" accept filter
229
230# Misc.
231pseudo-device	loop			# loopback interface; required
232pseudo-device	pty			# pseudo-terminals
233pseudo-device	md			# memory disk device
234pseudo-device	vnd			# disk-like interface to files
235#options 	VND_COMPRESSION		# compressed vnd(4)
236pseudo-device	ccd		4	# concatenated and striped disks
237#pseudo-device	cgd		4	# cryptographic disk devices
238pseudo-device	raid		8	# RAIDframe disk driver
239#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
240# Options to enable various other RAIDframe RAID types.
241#options 	RF_INCLUDE_EVENODD=1
242#options 	RF_INCLUDE_RAID5_RS=1
243#options 	RF_INCLUDE_PARITYLOGGING=1
244#options 	RF_INCLUDE_CHAINDECLUSTER=1
245#options 	RF_INCLUDE_INTERDECLUSTER=1
246#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
247#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
248pseudo-device	fss			# file system snapshot device
249pseudo-device	sl			# SLIP interfaces
250pseudo-device	ppp			# PPP interfaces
251pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
252pseudo-device	tun			# Network "tunnel" device
253pseudo-device	tap			# virtual Ethernet
254pseudo-device	gre			# generic L3 over IP tunnel
255pseudo-device	bpfilter		# Berkeley Packet Filter
256#pseudo-device	carp			# Common Address Redundancy Protocol
257pseudo-device	ipfilter		# ip filter
258pseudo-device	strip			# Starmode Radio IP (Metricom)
259pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
260#pseudo-device	faith			# IPv[46] tcp relay translation i/f
261pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
262pseudo-device	vlan			# IEEE 802.1q encapsulation
263pseudo-device	bridge			# simple inter-network bridging
264#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
265pseudo-device	agr			# IEEE 802.3ad link aggregation
266#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
267pseudo-device	clockctl		# user control of clock subsystem
268pseudo-device	ksyms			# /dev/ksyms
269#pseudo-device	pf			# PF packet filter
270#pseudo-device	pflog			# PF log if
271pseudo-device	putter			# for puffs and pud
272
273# Veriexec
274#
275# a pseudo device needed for veriexec
276#pseudo-device	veriexec		1
277#
278# Uncomment the fingerprint methods below that are desired. Note that
279# removing fingerprint methods will have almost no impact on the kernel
280# code size.
281#
282#options 	VERIFIED_EXEC_FP_RMD160
283#options 	VERIFIED_EXEC_FP_SHA256
284#options 	VERIFIED_EXEC_FP_SHA384
285#options 	VERIFIED_EXEC_FP_SHA512
286#options 	VERIFIED_EXEC_FP_SHA1
287#options 	VERIFIED_EXEC_FP_MD5
288