GENERIC revision 1.49
1# $NetBSD: GENERIC,v 1.49 2004/06/18 15:04:05 christos Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include		"arch/news68k/conf/std.news68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.49 $"
26
27maxusers	8
28
29options 	news1200		# news1200 support
30options 	news1700		# news1[4567]00 support
31options 	CPU_SINGLE		# Will IOP be supported eventually?
32#options 	FPU_EMULATE
33
34# Standard system options
35options 	NTP			# NTP phase/frequency locked loop
36options 	KTRACE			# system call tracing support
37options 	SYSTRACE		# system call vetting via systrace(1)
38options 	SYSVMSG			# System V message queues
39options 	SYSVSEM			# System V semaphores
40#options 	SEMMNI=10		# number of semaphore identifiers
41#options 	SEMMNS=60		# number of semaphores in system
42#options 	SEMUME=10		# max number of undo entries per process
43#options 	SEMMNU=30		# number of undo structures in system
44options 	SYSVSHM			# System V shared memory
45#options 	SHMMAXPGS=1024		# 1024 pages is the default
46options 	LKM			# loadable kernel modules
47options 	USERCONF		# userconf(4) support
48#options	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
49
50# Enable experimental buffer queue strategy for better responsiveness under
51# high disk I/O load. Use it with caution - it's not proven to be stable yet.
52#options 	NEW_BUFQ_STRATEGY
53
54# Debugging options
55#options 	DIAGNOSTIC		# extra kernel sanity checking
56#options 	DEBUG			# extra kernel debugging support
57#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
58options 	DDB			# kernel dynamic debugger
59#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
60#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
61options 	SCSIVERBOSE		# Verbose SCSI errors
62#options 	SCSIDEBUG		# extra SCSI debugging support
63#makeoptions	DEBUG="-g"		# compile full symbol table
64
65# Compatibility options
66options 	COMPAT_43		# compatibility with 4.3BSD binaries
67options 	COMPAT_12		# NetBSD 1.2 binary compatibility
68options 	COMPAT_13		# NetBSD 1.3 binary compatibility
69options 	COMPAT_14		# NetBSD 1.4 binary compatibility
70options 	COMPAT_15		# NetBSD 1.5 binary compatibility
71options 	COMPAT_16		# NetBSD 1.6 binary compatibility
72options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out
73
74#options 	COMPAT_SVR4		# binary compatibility with SVR4
75options 	COMPAT_SUNOS		# binary compatibility with SunOS
76#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
77
78#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
79
80# Filesystem options
81file-system	FFS		# Berkeley Fast Filesystem
82file-system	LFS		# log-structured file system
83file-system	NFS		# Sun NFS-compatible filesystem client
84file-system	MFS		# memory-based filesystem
85file-system	CD9660		# ISO 9660 + Rock Ridge file system
86file-system	MSDOSFS		# MS-DOS FAT file system
87file-system	KERNFS		# /kern
88file-system	PROCFS		# /proc
89file-system	FDESC		# /dev/fd/*
90file-system	NULLFS		# loopback file system
91file-system 	OVERLAY		# overlay file system
92file-system	PORTAL		# portal filesystem (still experimental)
93file-system	UMAPFS		# NULLFS + uid and gid remapping
94file-system	UNION		# union file system
95#file-system	CODA		# Coda File System; also needs vcode (below)
96
97options 	NFSSERVER	# nfs server support
98options 	QUOTA		# ffs quotas
99#options 	FFS_EI		# ffs endian independant support
100options 	SOFTDEP		# ffs soft updates support
101
102# Networking options
103options 	INET		# Internet protocols
104options 	INET6		# IPV6
105#options 	IPSEC		# IP security
106#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
107#options 	IPSEC_DEBUG	# debug for IP security
108#options 	GATEWAY		# IP packet forwarding
109#options 	MROUTING	# IP multicast routing
110#options 	NS		# XNS
111#options 	NSIP		# XNS tunneling over IP
112#options 	ISO,TPIP	# OSI
113#options 	EON		# OSI tunneling over IP
114#options 	CCITT,LLC,HDLC	# X.25
115#options 	NETATALK	# AppleTalk networking protocols
116options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
117options 	PPP_DEFLATE	# Deflate compression support for PPP
118options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
119options 	PFIL_HOOKS	# pfil(9) packet filter hooks
120options 	IPFILTER_LOG	# ipmon(8) log support
121#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
122#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
123
124options 	NFS_BOOT_BOOTPARAM
125options 	NFS_BOOT_DHCP
126
127config	netbsd root on ? type ?
128#config	netbsd root on ? type nfs
129
130#
131# device declarations
132#
133
134mainbus0 at root
135
136# NEWS HYPER-BUS
137hb0	at mainbus0 systype NEWS1700
138hb1	at mainbus0 systype NEWS1200
139
140# interval timer
141timer0	at hb0 addr 0xe1000000 ipl 6			# news1700
142timer0	at hb1 addr 0xe1140000 ipl 6			# news1200
143
144# MK48T02 TOD clock
145mkclock0 at hb0 addr 0xe0d80000				# news1700
146mkclock0 at hb1 addr 0xe1420000				# news1200
147
148# onboard LANCE ethernet
149le0	at hb0 addr 0xe0f00000 ipl 4			# news1700
150le0	at hb1 addr 0xe1a40000 ipl 4			# news1200
151
152# keyboard/mouse
153kbc0	at hb0 addr 0xe0d00000 ipl 5			# news1700
154kb0	at kbc0						# news1700
155ms0	at kbc0						# news1700
156
157kb0	at hb1 addr 0xe1240000 ipl 5			# news1200
158ms0	at hb1 addr 0xe1280000 ipl 5			# news1200
159
160wskbd*	at kb?
161wsmouse* at ms?
162
163# onboard z8530 SCC
164zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0	# news1700
165zsc0	at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1	# news1200
166zstty0	at zsc0 channel 0
167zstty1	at zsc0 channel 1
168
169# Frame buffer devices; not yet
170#fb0	at hb0 addr 0xf0700000			# NWB225
171#fb1	at hb0 addr 0xf0f00000			# NWB512
172
173# onboard uPD72067 FDC; not yet
174#fdc0	at hb0 addr 0xe0c80000 ipl 3
175#fd*	at fdc0
176
177# onboard CXD1180 SCSI controller
178#
179# This driver has several flags which may be enabled using
180# the "flags" directive.  Valid flags are:
181#
182# 0x000ff	Set (1<<target) to disable disconnect/reselect
183# 0x0ff00	Set (1<<(target+8)) to disable parity checking
184# 0x10000	Set this bit to disable DMA interrupts (poll)
185# 0x20000	Set this bit to disable DMA entirely (use PIO)
186#
187# For example: "flags 0x1000f" would disable DMA interrupts,
188# and disable disconnect/reselect for targets 0-3
189#
190si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
191scsibus* at si0
192
193sd*	at scsibus? target ? lun ?		# SCSI disks
194st*	at scsibus? target ? lun ?		# SCSI tapes
195cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
196ch*	at scsibus? target ? lun ?		# SCSI changer devices
197ss*	at scsibus? target ? lun ?		# SCSI scanners
198uk*	at scsibus? target ? lun ?		# unknown SCSI devices
199
200# Misc.
201pseudo-device	loop			# loopback interface; required
202pseudo-device	pty			# pseudo-terminals
203pseudo-device	md		1	# memory disk device
204pseudo-device	vnd		4	# disk-like interface to files
205pseudo-device	ccd		4	# concatenated and striped disks
206#pseudo-device	cgd		4	# cryptographic disk devices
207pseudo-device	raid		8	# RAIDframe disk driver
208#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
209# Options to enable various other RAIDframe RAID types.
210# options	RF_INCLUDE_EVENODD=1
211# options	RF_INCLUDE_RAID5_RS=1
212# options	RF_INCLUDE_PARITYLOGGING=1
213# options	RF_INCLUDE_CHAINDECLUSTER=1
214# options	RF_INCLUDE_INTERDECLUSTER=1
215# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
216# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
217pseudo-device	sl		2	# SLIP interfaces
218pseudo-device	ppp		2	# PPP interfaces
219pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
220pseudo-device	tun		4	# Network "tunnel" device
221pseudo-device	gre		2	# generic L3 over IP tunnel
222pseudo-device	bpfilter	16	# Berkeley Packet Filter
223pseudo-device	ipfilter		# ip filter
224pseudo-device	strip		1	# Starmode Radio IP (Metricom)
225pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
226#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
227#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
228pseudo-device	vlan			# IEEE 802.1q encapsulation
229pseudo-device	bridge			# simple inter-network bridging
230#options	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
231pseudo-device	rnd			# /dev/random and in-kernle generator
232#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
233pseudo-device	clockctl		# user control of clock subsystem
234pseudo-device	ksyms			# /dev/ksyms
235