GENERIC revision 1.50 1 # $NetBSD: GENERIC,v 1.50 2004/06/22 14:09:50 itojun Exp $
2 #
3 # GENERIC machine description file
4 #
5 # This machine description file is used to generate the default NetBSD
6 # kernel. The generic kernel does not include all options, subsystems
7 # and device drivers, but should be useful for most applications.
8 #
9 # The machine description file can be customised for your specific
10 # machine to reduce the kernel size and improve its performance.
11 #
12 # For further information on compiling NetBSD kernels, see the config(8)
13 # man page.
14 #
15 # For further information on hardware support for this architecture, see
16 # the intro(4) man page. For further information about kernel options
17 # for this architecture, see the options(4) man page. For an explanation
18 # of each device driver in this file see the section 4 man page for the
19 # device.
20
21 include "arch/news68k/conf/std.news68k"
22
23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24
25 #ident "GENERIC-$Revision: 1.50 $"
26
27 maxusers 8
28
29 options news1200 # news1200 support
30 options news1700 # news1[4567]00 support
31 options CPU_SINGLE # Will IOP be supported eventually?
32 #options FPU_EMULATE
33
34 # Standard system options
35 options NTP # NTP phase/frequency locked loop
36 options KTRACE # system call tracing support
37 options SYSTRACE # system call vetting via systrace(1)
38 options SYSVMSG # System V message queues
39 options SYSVSEM # System V semaphores
40 #options SEMMNI=10 # number of semaphore identifiers
41 #options SEMMNS=60 # number of semaphores in system
42 #options SEMUME=10 # max number of undo entries per process
43 #options SEMMNU=30 # number of undo structures in system
44 options SYSVSHM # System V shared memory
45 #options SHMMAXPGS=1024 # 1024 pages is the default
46 options LKM # loadable kernel modules
47 options USERCONF # userconf(4) support
48 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
49
50 # Enable experimental buffer queue strategy for better responsiveness under
51 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
52 #options NEW_BUFQ_STRATEGY
53
54 # Debugging options
55 #options DIAGNOSTIC # extra kernel sanity checking
56 #options DEBUG # extra kernel debugging support
57 #options KMEMSTATS # kernel memory statistics (vmstat -m)
58 options DDB # kernel dynamic debugger
59 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
60 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic'
61 options SCSIVERBOSE # Verbose SCSI errors
62 #options SCSIDEBUG # extra SCSI debugging support
63 #makeoptions DEBUG="-g" # compile full symbol table
64
65 # Compatibility options
66 options COMPAT_43 # compatibility with 4.3BSD binaries
67 options COMPAT_12 # NetBSD 1.2 binary compatibility
68 options COMPAT_13 # NetBSD 1.3 binary compatibility
69 options COMPAT_14 # NetBSD 1.4 binary compatibility
70 options COMPAT_15 # NetBSD 1.5 binary compatibility
71 options COMPAT_16 # NetBSD 1.6 binary compatibility
72 options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
73
74 #options COMPAT_SVR4 # binary compatibility with SVR4
75 options COMPAT_SUNOS # binary compatibility with SunOS
76 #options COMPAT_LINUX # binary compatibllity with Linux/m68k
77
78 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
79
80 # Filesystem options
81 file-system FFS # Berkeley Fast Filesystem
82 file-system LFS # log-structured file system
83 file-system NFS # Sun NFS-compatible filesystem client
84 file-system MFS # memory-based filesystem
85 file-system CD9660 # ISO 9660 + Rock Ridge file system
86 file-system MSDOSFS # MS-DOS FAT file system
87 file-system KERNFS # /kern
88 file-system PROCFS # /proc
89 file-system FDESC # /dev/fd/*
90 file-system NULLFS # loopback file system
91 file-system OVERLAY # overlay file system
92 file-system PORTAL # portal filesystem (still experimental)
93 file-system UMAPFS # NULLFS + uid and gid remapping
94 file-system UNION # union file system
95 #file-system CODA # Coda File System; also needs vcode (below)
96
97 options NFSSERVER # nfs server support
98 options QUOTA # ffs quotas
99 #options FFS_EI # ffs endian independant support
100 options SOFTDEP # ffs soft updates support
101
102 # Networking options
103 options INET # Internet protocols
104 options INET6 # IPV6
105 #options IPSEC # IP security
106 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
107 #options IPSEC_DEBUG # debug for IP security
108 #options GATEWAY # IP packet forwarding
109 #options MROUTING # IP multicast routing
110 #options NS # XNS
111 #options NSIP # XNS tunneling over IP
112 #options ISO,TPIP # OSI
113 #options EON # OSI tunneling over IP
114 #options CCITT,LLC,HDLC # X.25
115 #options NETATALK # AppleTalk networking protocols
116 options PPP_BSDCOMP # BSD-Compress compression support for PPP
117 options PPP_DEFLATE # Deflate compression support for PPP
118 options PPP_FILTER # Active filter support for PPP (requires bpf)
119 options PFIL_HOOKS # pfil(9) packet filter hooks
120 options IPFILTER_LOG # ipmon(8) log support
121 #options IPFILTER_DEFAULT_BLOCK # block all packets by default
122 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
123
124 options NFS_BOOT_BOOTPARAM
125 options NFS_BOOT_DHCP
126
127 config netbsd root on ? type ?
128 #config netbsd root on ? type nfs
129
130 #
131 # device declarations
132 #
133
134 mainbus0 at root
135
136 # NEWS HYPER-BUS
137 hb0 at mainbus0 systype NEWS1700
138 hb1 at mainbus0 systype NEWS1200
139
140 # interval timer
141 timer0 at hb0 addr 0xe1000000 ipl 6 # news1700
142 timer0 at hb1 addr 0xe1140000 ipl 6 # news1200
143
144 # MK48T02 TOD clock
145 mkclock0 at hb0 addr 0xe0d80000 # news1700
146 mkclock0 at hb1 addr 0xe1420000 # news1200
147
148 # onboard LANCE ethernet
149 le0 at hb0 addr 0xe0f00000 ipl 4 # news1700
150 le0 at hb1 addr 0xe1a40000 ipl 4 # news1200
151
152 # keyboard/mouse
153 kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700
154 kb0 at kbc0 # news1700
155 ms0 at kbc0 # news1700
156
157 kb0 at hb1 addr 0xe1240000 ipl 5 # news1200
158 ms0 at hb1 addr 0xe1280000 ipl 5 # news1200
159
160 wskbd* at kb?
161 wsmouse* at ms?
162
163 # onboard z8530 SCC
164 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700
165 zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200
166 zstty0 at zsc0 channel 0
167 zstty1 at zsc0 channel 1
168
169 # Frame buffer devices; not yet
170 #fb0 at hb0 addr 0xf0700000 # NWB225
171 #fb1 at hb0 addr 0xf0f00000 # NWB512
172
173 # onboard uPD72067 FDC; not yet
174 #fdc0 at hb0 addr 0xe0c80000 ipl 3
175 #fd* at fdc0
176
177 # onboard CXD1180 SCSI controller
178 #
179 # This driver has several flags which may be enabled using
180 # the "flags" directive. Valid flags are:
181 #
182 # 0x000ff Set (1<<target) to disable disconnect/reselect
183 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
184 # 0x10000 Set this bit to disable DMA interrupts (poll)
185 # 0x20000 Set this bit to disable DMA entirely (use PIO)
186 #
187 # For example: "flags 0x1000f" would disable DMA interrupts,
188 # and disable disconnect/reselect for targets 0-3
189 #
190 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
191 scsibus* at si0
192
193 sd* at scsibus? target ? lun ? # SCSI disks
194 st* at scsibus? target ? lun ? # SCSI tapes
195 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
196 ch* at scsibus? target ? lun ? # SCSI changer devices
197 ss* at scsibus? target ? lun ? # SCSI scanners
198 uk* at scsibus? target ? lun ? # unknown SCSI devices
199
200 # Misc.
201 pseudo-device loop # loopback interface; required
202 pseudo-device pty # pseudo-terminals
203 pseudo-device md 1 # memory disk device
204 pseudo-device vnd 4 # disk-like interface to files
205 pseudo-device ccd 4 # concatenated and striped disks
206 #pseudo-device cgd 4 # cryptographic disk devices
207 pseudo-device raid 8 # RAIDframe disk driver
208 #options RAID_AUTOCONFIG # auto-configuration of RAID components
209 # Options to enable various other RAIDframe RAID types.
210 # options RF_INCLUDE_EVENODD=1
211 # options RF_INCLUDE_RAID5_RS=1
212 # options RF_INCLUDE_PARITYLOGGING=1
213 # options RF_INCLUDE_CHAINDECLUSTER=1
214 # options RF_INCLUDE_INTERDECLUSTER=1
215 # options RF_INCLUDE_PARITY_DECLUSTERING=1
216 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
217 pseudo-device sl 2 # SLIP interfaces
218 pseudo-device ppp 2 # PPP interfaces
219 pseudo-device pppoe # PPP over Ethernet (RFC 2516)
220 pseudo-device tun 4 # Network "tunnel" device
221 pseudo-device gre 2 # generic L3 over IP tunnel
222 pseudo-device bpfilter 16 # Berkeley Packet Filter
223 pseudo-device ipfilter # ip filter
224 pseudo-device strip 1 # Starmode Radio IP (Metricom)
225 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
226 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f
227 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation
228 pseudo-device vlan # IEEE 802.1q encapsulation
229 pseudo-device bridge # simple inter-network bridging
230 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
231 pseudo-device rnd # /dev/random and in-kernle generator
232 #pseudo-device vcoda 4 # coda minicache <-> venus comm.
233 pseudo-device clockctl # user control of clock subsystem
234 pseudo-device ksyms # /dev/ksyms
235 #pseudo-device pf # PF packet filter
236 #pseudo-device pflog # PF log if
237