GENERIC revision 1.53
1 # $NetBSD: GENERIC,v 1.53 2004/07/15 03:53:50 atatat Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/news68k/conf/std.news68k" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.53 $" 26 27 maxusers 8 28 29 options news1200 # news1200 support 30 options news1700 # news1[4567]00 support 31 options CPU_SINGLE # Will IOP be supported eventually? 32 #options FPU_EMULATE 33 34 # Standard system options 35 options NTP # NTP phase/frequency locked loop 36 options KTRACE # system call tracing support 37 options SYSTRACE # system call vetting via systrace(1) 38 options SYSVMSG # System V message queues 39 options SYSVSEM # System V semaphores 40 #options SEMMNI=10 # number of semaphore identifiers 41 #options SEMMNS=60 # number of semaphores in system 42 #options SEMUME=10 # max number of undo entries per process 43 #options SEMMNU=30 # number of undo structures in system 44 options SYSVSHM # System V shared memory 45 #options SHMMAXPGS=1024 # 1024 pages is the default 46 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 47 options LKM # loadable kernel modules 48 options USERCONF # userconf(4) support 49 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 50 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 51 52 # Enable experimental buffer queue strategy for better responsiveness under 53 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 54 #options NEW_BUFQ_STRATEGY 55 56 # Debugging options 57 #options DIAGNOSTIC # extra kernel sanity checking 58 #options DEBUG # extra kernel debugging support 59 #options KMEMSTATS # kernel memory statistics (vmstat -m) 60 options DDB # kernel dynamic debugger 61 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 62 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 63 options SCSIVERBOSE # Verbose SCSI errors 64 #options SCSIDEBUG # extra SCSI debugging support 65 #makeoptions DEBUG="-g" # compile full symbol table 66 67 # Compatibility options 68 options COMPAT_43 # compatibility with 4.3BSD binaries 69 options COMPAT_12 # NetBSD 1.2 binary compatibility 70 options COMPAT_13 # NetBSD 1.3 binary compatibility 71 options COMPAT_14 # NetBSD 1.4 binary compatibility 72 options COMPAT_15 # NetBSD 1.5 binary compatibility 73 options COMPAT_16 # NetBSD 1.6 binary compatibility 74 options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 75 76 #options COMPAT_SVR4 # binary compatibility with SVR4 77 options COMPAT_SUNOS # binary compatibility with SunOS 78 #options COMPAT_LINUX # binary compatibllity with Linux/m68k 79 80 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 81 82 # Filesystem options 83 file-system FFS # Berkeley Fast Filesystem 84 file-system LFS # log-structured file system 85 file-system NFS # Sun NFS-compatible filesystem client 86 file-system MFS # memory-based filesystem 87 file-system CD9660 # ISO 9660 + Rock Ridge file system 88 file-system MSDOSFS # MS-DOS FAT file system 89 file-system KERNFS # /kern 90 file-system PROCFS # /proc 91 file-system FDESC # /dev/fd/* 92 file-system NULLFS # loopback file system 93 file-system OVERLAY # overlay file system 94 file-system PORTAL # portal filesystem (still experimental) 95 file-system UMAPFS # NULLFS + uid and gid remapping 96 file-system UNION # union file system 97 #file-system CODA # Coda File System; also needs vcode (below) 98 99 options NFSSERVER # nfs server support 100 options QUOTA # ffs quotas 101 #options FFS_EI # ffs endian independant support 102 options SOFTDEP # ffs soft updates support 103 104 # Networking options 105 options INET # Internet protocols 106 options INET6 # IPV6 107 #options IPSEC # IP security 108 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 109 #options IPSEC_DEBUG # debug for IP security 110 #options GATEWAY # IP packet forwarding 111 #options MROUTING # IP multicast routing 112 #options NS # XNS 113 #options NSIP # XNS tunneling over IP 114 #options ISO,TPIP # OSI 115 #options EON # OSI tunneling over IP 116 #options CCITT,LLC,HDLC # X.25 117 #options NETATALK # AppleTalk networking protocols 118 options PPP_BSDCOMP # BSD-Compress compression support for PPP 119 options PPP_DEFLATE # Deflate compression support for PPP 120 options PPP_FILTER # Active filter support for PPP (requires bpf) 121 options PFIL_HOOKS # pfil(9) packet filter hooks 122 options IPFILTER_LOG # ipmon(8) log support 123 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 124 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 125 126 #options ALTQ # Manipulate network interfaces' output queues 127 #options ALTQ_BLUE # Stochastic Fair Blue 128 #options ALTQ_CBQ # Class-Based Queueing 129 #options ALTQ_CDNR # Diffserv Traffic Conditioner 130 #options ALTQ_FIFOQ # First-In First-Out Queue 131 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 132 #options ALTQ_HFSC # Hierarchical Fair Service Curve 133 #options ALTQ_LOCALQ # Local queueing discipline 134 #options ALTQ_PRIQ # Priority Queueing 135 #options ALTQ_RED # Random Early Detection 136 #options ALTQ_RIO # RED with IN/OUT 137 #options ALTQ_WFQ # Weighted Fair Queueing 138 139 options NFS_BOOT_BOOTPARAM 140 options NFS_BOOT_DHCP 141 142 config netbsd root on ? type ? 143 #config netbsd root on ? type nfs 144 145 # 146 # device declarations 147 # 148 149 mainbus0 at root 150 151 # NEWS HYPER-BUS 152 hb0 at mainbus0 systype NEWS1700 153 hb1 at mainbus0 systype NEWS1200 154 155 # interval timer 156 timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 157 timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 158 159 # MK48T02 TOD clock 160 mkclock0 at hb0 addr 0xe0d80000 # news1700 161 mkclock0 at hb1 addr 0xe1420000 # news1200 162 163 # onboard LANCE ethernet 164 le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 165 le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 166 167 # keyboard/mouse 168 kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 169 kb0 at kbc0 # news1700 170 ms0 at kbc0 # news1700 171 172 kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 173 ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 174 175 wskbd* at kb? 176 wsmouse* at ms? 177 178 # onboard z8530 SCC 179 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 180 zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 181 zstty0 at zsc0 channel 0 182 zstty1 at zsc0 channel 1 183 184 # Frame buffer devices; not yet 185 #fb0 at hb0 addr 0xf0700000 # NWB225 186 #fb1 at hb0 addr 0xf0f00000 # NWB512 187 188 # onboard uPD72067 FDC; not yet 189 #fdc0 at hb0 addr 0xe0c80000 ipl 3 190 #fd* at fdc0 191 192 # onboard CXD1180 SCSI controller 193 # 194 # This driver has several flags which may be enabled using 195 # the "flags" directive. Valid flags are: 196 # 197 # 0x000ff Set (1<<target) to disable disconnect/reselect 198 # 0x0ff00 Set (1<<(target+8)) to disable parity checking 199 # 0x10000 Set this bit to disable DMA interrupts (poll) 200 # 0x20000 Set this bit to disable DMA entirely (use PIO) 201 # 202 # For example: "flags 0x1000f" would disable DMA interrupts, 203 # and disable disconnect/reselect for targets 0-3 204 # 205 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 206 scsibus* at si0 207 208 sd* at scsibus? target ? lun ? # SCSI disks 209 st* at scsibus? target ? lun ? # SCSI tapes 210 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 211 ch* at scsibus? target ? lun ? # SCSI changer devices 212 ss* at scsibus? target ? lun ? # SCSI scanners 213 uk* at scsibus? target ? lun ? # unknown SCSI devices 214 215 # Misc. 216 pseudo-device loop # loopback interface; required 217 pseudo-device pty # pseudo-terminals 218 pseudo-device md 1 # memory disk device 219 pseudo-device vnd 4 # disk-like interface to files 220 pseudo-device ccd 4 # concatenated and striped disks 221 #pseudo-device cgd 4 # cryptographic disk devices 222 pseudo-device raid 8 # RAIDframe disk driver 223 #options RAID_AUTOCONFIG # auto-configuration of RAID components 224 # Options to enable various other RAIDframe RAID types. 225 # options RF_INCLUDE_EVENODD=1 226 # options RF_INCLUDE_RAID5_RS=1 227 # options RF_INCLUDE_PARITYLOGGING=1 228 # options RF_INCLUDE_CHAINDECLUSTER=1 229 # options RF_INCLUDE_INTERDECLUSTER=1 230 # options RF_INCLUDE_PARITY_DECLUSTERING=1 231 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 232 pseudo-device sl 2 # SLIP interfaces 233 pseudo-device ppp 2 # PPP interfaces 234 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 235 pseudo-device tun 4 # Network "tunnel" device 236 pseudo-device gre 2 # generic L3 over IP tunnel 237 pseudo-device bpfilter 16 # Berkeley Packet Filter 238 pseudo-device ipfilter # ip filter 239 pseudo-device strip 1 # Starmode Radio IP (Metricom) 240 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 241 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 242 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 243 pseudo-device vlan # IEEE 802.1q encapsulation 244 pseudo-device bridge # simple inter-network bridging 245 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 246 pseudo-device rnd # /dev/random and in-kernle generator 247 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 248 pseudo-device clockctl # user control of clock subsystem 249 pseudo-device ksyms # /dev/ksyms 250 #pseudo-device pf # PF packet filter 251 #pseudo-device pflog # PF log if 252
Indexes created Sat Nov 01 05:10:12 GMT 2025