GENERIC revision 1.58
1# $NetBSD: GENERIC,v 1.58 2005/01/17 15:28:52 cube Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/news68k/conf/std.news68k" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.58 $" 26 27maxusers 8 28 29options news1200 # news1200 support 30options news1700 # news1[4567]00 support 31options CPU_SINGLE # Will IOP be supported eventually? 32#options FPU_EMULATE 33 34# Standard system options 35options NTP # NTP phase/frequency locked loop 36options KTRACE # system call tracing support 37options SYSTRACE # system call vetting via systrace(1) 38options SYSVMSG # System V message queues 39options SYSVSEM # System V semaphores 40#options SEMMNI=10 # number of semaphore identifiers 41#options SEMMNS=60 # number of semaphores in system 42#options SEMUME=10 # max number of undo entries per process 43#options SEMMNU=30 # number of undo structures in system 44options SYSVSHM # System V shared memory 45#options SHMMAXPGS=1024 # 1024 pages is the default 46options P1003_1B_SEMAPHORE # p1003.1b semaphore support 47options LKM # loadable kernel modules 48options USERCONF # userconf(4) support 49#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 50options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 51 52# Enable experimental buffer queue strategy for better responsiveness under 53# high disk I/O load. Use it with caution - it's not proven to be stable yet. 54#options NEW_BUFQ_STRATEGY 55 56# Debugging options 57#options DIAGNOSTIC # extra kernel sanity checking 58#options DEBUG # extra kernel debugging support 59#options KMEMSTATS # kernel memory statistics (vmstat -m) 60options DDB # kernel dynamic debugger 61#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 62#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 63options SCSIVERBOSE # Verbose SCSI errors 64#options SCSIDEBUG # extra SCSI debugging support 65#makeoptions DEBUG="-g" # compile full symbol table 66 67# Compatibility options 68options COMPAT_43 # compatibility with 4.3BSD binaries 69options COMPAT_12 # NetBSD 1.2 binary compatibility 70options COMPAT_13 # NetBSD 1.3 binary compatibility 71options COMPAT_14 # NetBSD 1.4 binary compatibility 72options COMPAT_15 # NetBSD 1.5 binary compatibility 73options COMPAT_16 # NetBSD 1.6 binary compatibility 74options COMPAT_20 # NetBSD 2.0 binary compatibility 75options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 76 77#options COMPAT_SVR4 # binary compatibility with SVR4 78options COMPAT_SUNOS # binary compatibility with SunOS 79#options COMPAT_LINUX # binary compatibllity with Linux/m68k 80options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 81 82#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 83 84# Filesystem options 85file-system FFS # Berkeley Fast Filesystem 86file-system LFS # log-structured file system 87file-system NFS # Sun NFS-compatible filesystem client 88file-system MFS # memory-based filesystem 89file-system CD9660 # ISO 9660 + Rock Ridge file system 90file-system MSDOSFS # MS-DOS FAT file system 91file-system KERNFS # /kern 92file-system PROCFS # /proc 93file-system FDESC # /dev/fd/* 94file-system NULLFS # loopback file system 95file-system OVERLAY # overlay file system 96file-system PORTAL # portal filesystem (still experimental) 97file-system UMAPFS # NULLFS + uid and gid remapping 98file-system UNION # union file system 99#file-system CODA # Coda File System; also needs vcode (below) 100 101options NFSSERVER # nfs server support 102options QUOTA # ffs quotas 103#options FFS_EI # ffs endian independant support 104options SOFTDEP # ffs soft updates support 105 106# Networking options 107options INET # Internet protocols 108options INET6 # IPV6 109#options IPSEC # IP security 110#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 111#options IPSEC_DEBUG # debug for IP security 112#options GATEWAY # IP packet forwarding 113#options MROUTING # IP multicast routing 114#options PIM # Protocol Independent Multicast 115#options NS # XNS 116#options NSIP # XNS tunneling over IP 117#options ISO,TPIP # OSI 118#options EON # OSI tunneling over IP 119#options CCITT,LLC,HDLC # X.25 120#options NETATALK # AppleTalk networking protocols 121options PPP_BSDCOMP # BSD-Compress compression support for PPP 122options PPP_DEFLATE # Deflate compression support for PPP 123options PPP_FILTER # Active filter support for PPP (requires bpf) 124options PFIL_HOOKS # pfil(9) packet filter hooks 125options IPFILTER_LOG # ipmon(8) log support 126#options IPFILTER_DEFAULT_BLOCK # block all packets by default 127#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 128 129#options ALTQ # Manipulate network interfaces' output queues 130#options ALTQ_BLUE # Stochastic Fair Blue 131#options ALTQ_CBQ # Class-Based Queueing 132#options ALTQ_CDNR # Diffserv Traffic Conditioner 133#options ALTQ_FIFOQ # First-In First-Out Queue 134#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 135#options ALTQ_HFSC # Hierarchical Fair Service Curve 136#options ALTQ_LOCALQ # Local queueing discipline 137#options ALTQ_PRIQ # Priority Queueing 138#options ALTQ_RED # Random Early Detection 139#options ALTQ_RIO # RED with IN/OUT 140#options ALTQ_WFQ # Weighted Fair Queueing 141 142options NFS_BOOT_BOOTPARAM 143options NFS_BOOT_DHCP 144 145config netbsd root on ? type ? 146#config netbsd root on ? type nfs 147 148# 149# device declarations 150# 151 152mainbus0 at root 153 154# NEWS HYPER-BUS 155hb0 at mainbus0 systype NEWS1700 156hb1 at mainbus0 systype NEWS1200 157 158# interval timer 159timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 160timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 161 162# MK48T02 TOD clock 163mkclock0 at hb0 addr 0xe0d80000 # news1700 164mkclock0 at hb1 addr 0xe1420000 # news1200 165 166# onboard LANCE ethernet 167le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 168le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 169 170# keyboard/mouse 171kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 172kb0 at kbc0 # news1700 173ms0 at kbc0 # news1700 174 175kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 176ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 177 178wskbd* at kb? 179wsmouse* at ms? 180 181# onboard z8530 SCC 182zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 183zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 184zstty0 at zsc0 channel 0 185zstty1 at zsc0 channel 1 186 187# Frame buffer devices; not yet 188#fb0 at hb0 addr 0xf0700000 # NWB225 189#fb1 at hb0 addr 0xf0f00000 # NWB512 190 191# onboard uPD72067 FDC; not yet 192#fdc0 at hb0 addr 0xe0c80000 ipl 3 193#fd* at fdc0 194 195# onboard CXD1180 SCSI controller 196# 197# This driver has several flags which may be enabled using 198# the "flags" directive. Valid flags are: 199# 200# 0x000ff Set (1<<target) to disable disconnect/reselect 201# 0x0ff00 Set (1<<(target+8)) to disable parity checking 202# 0x10000 Set this bit to disable DMA interrupts (poll) 203# 0x20000 Set this bit to disable DMA entirely (use PIO) 204# 205# For example: "flags 0x1000f" would disable DMA interrupts, 206# and disable disconnect/reselect for targets 0-3 207# 208si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 209scsibus* at si0 210 211sd* at scsibus? target ? lun ? # SCSI disks 212st* at scsibus? target ? lun ? # SCSI tapes 213cd* at scsibus? target ? lun ? # SCSI CD-ROMs 214ch* at scsibus? target ? lun ? # SCSI changer devices 215ss* at scsibus? target ? lun ? # SCSI scanners 216uk* at scsibus? target ? lun ? # unknown SCSI devices 217 218# Misc. 219pseudo-device loop # loopback interface; required 220pseudo-device pty # pseudo-terminals 221pseudo-device md 1 # memory disk device 222pseudo-device vnd 4 # disk-like interface to files 223pseudo-device ccd 4 # concatenated and striped disks 224#pseudo-device cgd 4 # cryptographic disk devices 225pseudo-device raid 8 # RAIDframe disk driver 226#options RAID_AUTOCONFIG # auto-configuration of RAID components 227# Options to enable various other RAIDframe RAID types. 228#options RF_INCLUDE_EVENODD=1 229#options RF_INCLUDE_RAID5_RS=1 230#options RF_INCLUDE_PARITYLOGGING=1 231#options RF_INCLUDE_CHAINDECLUSTER=1 232#options RF_INCLUDE_INTERDECLUSTER=1 233#options RF_INCLUDE_PARITY_DECLUSTERING=1 234#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 235pseudo-device sl 2 # SLIP interfaces 236pseudo-device ppp 2 # PPP interfaces 237pseudo-device pppoe # PPP over Ethernet (RFC 2516) 238pseudo-device tun 4 # Network "tunnel" device 239pseudo-device tap # virtual Ethernet 240pseudo-device gre 2 # generic L3 over IP tunnel 241pseudo-device bpfilter 16 # Berkeley Packet Filter 242pseudo-device ipfilter # ip filter 243pseudo-device strip 1 # Starmode Radio IP (Metricom) 244pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 245#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 246#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 247pseudo-device vlan # IEEE 802.1q encapsulation 248pseudo-device bridge # simple inter-network bridging 249#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 250pseudo-device rnd # /dev/random and in-kernle generator 251#pseudo-device vcoda 4 # coda minicache <-> venus comm. 252pseudo-device clockctl # user control of clock subsystem 253pseudo-device ksyms # /dev/ksyms 254#pseudo-device pf # PF packet filter 255#pseudo-device pflog # PF log if 256