GENERIC revision 1.64
1# $NetBSD: GENERIC,v 1.64 2005/06/25 12:05:18 rpaulo Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/news68k/conf/std.news68k" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.64 $" 26 27maxusers 8 28 29options news1200 # news1200 support 30options news1700 # news1[4567]00 support 31options CPU_SINGLE # Will IOP be supported eventually? 32#options FPU_EMULATE 33 34# Standard system options 35options NTP # NTP phase/frequency locked loop 36options KTRACE # system call tracing support 37options SYSTRACE # system call vetting via systrace(1) 38options SYSVMSG # System V message queues 39options SYSVSEM # System V semaphores 40#options SEMMNI=10 # number of semaphore identifiers 41#options SEMMNS=60 # number of semaphores in system 42#options SEMUME=10 # max number of undo entries per process 43#options SEMMNU=30 # number of undo structures in system 44options SYSVSHM # System V shared memory 45#options SHMMAXPGS=1024 # 1024 pages is the default 46options P1003_1B_SEMAPHORE # p1003.1b semaphore support 47options LKM # loadable kernel modules 48options USERCONF # userconf(4) support 49#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 50options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 51 52# Enable experimental buffer queue strategy for better responsiveness under 53# high disk I/O load. Use it with caution - it's not proven to be stable yet. 54#options BUFQ_READPRIO 55#options BUFQ_PRIOCSCAN 56 57# Debugging options 58#options DIAGNOSTIC # extra kernel sanity checking 59#options DEBUG # extra kernel debugging support 60#options KMEMSTATS # kernel memory statistics (vmstat -m) 61options DDB # kernel dynamic debugger 62#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 63#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 64options SCSIVERBOSE # Verbose SCSI errors 65#options SCSIDEBUG # extra SCSI debugging support 66#makeoptions DEBUG="-g" # compile full symbol table 67 68# Compatibility options 69options COMPAT_43 # compatibility with 4.3BSD binaries 70options COMPAT_12 # NetBSD 1.2 binary compatibility 71options COMPAT_13 # NetBSD 1.3 binary compatibility 72options COMPAT_14 # NetBSD 1.4 binary compatibility 73options COMPAT_15 # NetBSD 1.5 binary compatibility 74options COMPAT_16 # NetBSD 1.6 binary compatibility 75options COMPAT_20 # NetBSD 2.0 binary compatibility 76options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 77 78#options COMPAT_SVR4 # binary compatibility with SVR4 79options COMPAT_SUNOS # binary compatibility with SunOS 80#options COMPAT_LINUX # binary compatibllity with Linux/m68k 81options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 82 83#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 84 85# Filesystem options 86file-system FFS # Berkeley Fast Filesystem 87file-system LFS # log-structured file system 88file-system NFS # Sun NFS-compatible filesystem client 89file-system MFS # memory-based filesystem 90file-system CD9660 # ISO 9660 + Rock Ridge file system 91file-system MSDOSFS # MS-DOS FAT file system 92file-system KERNFS # /kern 93file-system PROCFS # /proc 94file-system FDESC # /dev/fd/* 95file-system NULLFS # loopback file system 96file-system OVERLAY # overlay file system 97file-system PORTAL # portal filesystem (still experimental) 98file-system UMAPFS # NULLFS + uid and gid remapping 99file-system UNION # union file system 100#file-system CODA # Coda File System; also needs vcode (below) 101#file-system PTYFS # experimental - /dev/ptm support 102 103options NFSSERVER # nfs server support 104options QUOTA # ffs quotas 105#options FFS_EI # ffs endian independant support 106options SOFTDEP # ffs soft updates support 107#options FFS_NO_SNAPSHOT # ffs snapshots 108#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 109 110# Networking options 111options INET # Internet protocols 112options INET6 # IPV6 113#options IPSEC # IP security 114#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 115#options IPSEC_DEBUG # debug for IP security 116#options GATEWAY # IP packet forwarding 117#options MROUTING # IP multicast routing 118#options PIM # Protocol Independent Multicast 119#options NS # XNS 120#options NSIP # XNS tunneling over IP 121#options ISO,TPIP # OSI 122#options EON # OSI tunneling over IP 123#options CCITT,LLC,HDLC # X.25 124#options NETATALK # AppleTalk networking protocols 125options PPP_BSDCOMP # BSD-Compress compression support for PPP 126options PPP_DEFLATE # Deflate compression support for PPP 127options PPP_FILTER # Active filter support for PPP (requires bpf) 128options PFIL_HOOKS # pfil(9) packet filter hooks 129options IPFILTER_LOG # ipmon(8) log support 130#options IPFILTER_DEFAULT_BLOCK # block all packets by default 131#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 132 133#options ALTQ # Manipulate network interfaces' output queues 134#options ALTQ_BLUE # Stochastic Fair Blue 135#options ALTQ_CBQ # Class-Based Queueing 136#options ALTQ_CDNR # Diffserv Traffic Conditioner 137#options ALTQ_FIFOQ # First-In First-Out Queue 138#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 139#options ALTQ_HFSC # Hierarchical Fair Service Curve 140#options ALTQ_LOCALQ # Local queueing discipline 141#options ALTQ_PRIQ # Priority Queueing 142#options ALTQ_RED # Random Early Detection 143#options ALTQ_RIO # RED with IN/OUT 144#options ALTQ_WFQ # Weighted Fair Queueing 145 146options NFS_BOOT_BOOTPARAM 147options NFS_BOOT_DHCP 148 149config netbsd root on ? type ? 150#config netbsd root on ? type nfs 151 152# 153# device declarations 154# 155 156mainbus0 at root 157 158# NEWS HYPER-BUS 159hb0 at mainbus0 systype NEWS1700 160hb1 at mainbus0 systype NEWS1200 161 162# interval timer 163timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 164timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 165 166# MK48T02 TOD clock 167mkclock0 at hb0 addr 0xe0d80000 # news1700 168mkclock0 at hb1 addr 0xe1420000 # news1200 169 170# onboard LANCE ethernet 171le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 172le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 173 174# keyboard/mouse 175kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 176kb0 at kbc0 # news1700 177ms0 at kbc0 # news1700 178 179kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 180ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 181 182wskbd* at kb? 183wsmouse* at ms? 184 185# onboard z8530 SCC 186zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 187zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 188zstty0 at zsc0 channel 0 189zstty1 at zsc0 channel 1 190 191# Frame buffer devices; not yet 192#fb0 at hb0 addr 0xf0700000 # NWB225 193#fb1 at hb0 addr 0xf0f00000 # NWB512 194 195# onboard uPD72067 FDC; not yet 196#fdc0 at hb0 addr 0xe0c80000 ipl 3 197#fd* at fdc0 198 199# onboard CXD1180 SCSI controller 200# 201# This driver has several flags which may be enabled using 202# the "flags" directive. Valid flags are: 203# 204# 0x000ff Set (1<<target) to disable disconnect/reselect 205# 0x0ff00 Set (1<<(target+8)) to disable parity checking 206# 0x10000 Set this bit to disable DMA interrupts (poll) 207# 0x20000 Set this bit to disable DMA entirely (use PIO) 208# 209# For example: "flags 0x1000f" would disable DMA interrupts, 210# and disable disconnect/reselect for targets 0-3 211# 212si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 213scsibus* at si0 214 215sd* at scsibus? target ? lun ? # SCSI disks 216st* at scsibus? target ? lun ? # SCSI tapes 217cd* at scsibus? target ? lun ? # SCSI CD-ROMs 218ch* at scsibus? target ? lun ? # SCSI changer devices 219ss* at scsibus? target ? lun ? # SCSI scanners 220uk* at scsibus? target ? lun ? # unknown SCSI devices 221 222# Misc. 223pseudo-device loop # loopback interface; required 224pseudo-device pty # pseudo-terminals 225pseudo-device md 1 # memory disk device 226pseudo-device vnd 4 # disk-like interface to files 227pseudo-device ccd 4 # concatenated and striped disks 228#pseudo-device cgd 4 # cryptographic disk devices 229pseudo-device raid 8 # RAIDframe disk driver 230#options RAID_AUTOCONFIG # auto-configuration of RAID components 231# Options to enable various other RAIDframe RAID types. 232#options RF_INCLUDE_EVENODD=1 233#options RF_INCLUDE_RAID5_RS=1 234#options RF_INCLUDE_PARITYLOGGING=1 235#options RF_INCLUDE_CHAINDECLUSTER=1 236#options RF_INCLUDE_INTERDECLUSTER=1 237#options RF_INCLUDE_PARITY_DECLUSTERING=1 238#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 239pseudo-device fss 4 # file system snapshot device 240pseudo-device sl 2 # SLIP interfaces 241pseudo-device ppp 2 # PPP interfaces 242pseudo-device pppoe # PPP over Ethernet (RFC 2516) 243pseudo-device tun 4 # Network "tunnel" device 244pseudo-device tap # virtual Ethernet 245pseudo-device gre 2 # generic L3 over IP tunnel 246pseudo-device bpfilter 16 # Berkeley Packet Filter 247pseudo-device ipfilter # ip filter 248pseudo-device strip 1 # Starmode Radio IP (Metricom) 249pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 250#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 251#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 252pseudo-device vlan # IEEE 802.1q encapsulation 253pseudo-device bridge # simple inter-network bridging 254#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 255pseudo-device rnd # /dev/random and in-kernle generator 256#pseudo-device vcoda 4 # coda minicache <-> venus comm. 257pseudo-device clockctl # user control of clock subsystem 258pseudo-device ksyms # /dev/ksyms 259#pseudo-device pf # PF packet filter 260#pseudo-device pflog # PF log if 261