GENERIC revision 1.82
1# $NetBSD: GENERIC,v 1.82 2006/08/26 08:08:30 tsutsui Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include		"arch/news68k/conf/std.news68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.82 $"
26
27maxusers	8
28
29options 	news1200		# news1200 support
30options 	news1700		# news1[4567]00 support
31options 	CPU_SINGLE		# Will IOP be supported eventually?
32#options 	FPU_EMULATE
33
34# Standard system options
35options 	NTP			# NTP phase/frequency locked loop
36options 	KTRACE			# system call tracing support
37#options 	SYSTRACE		# system call vetting via systrace(1)
38options 	SYSVMSG			# System V message queues
39options 	SYSVSEM			# System V semaphores
40#options 	SEMMNI=10		# number of semaphore identifiers
41#options 	SEMMNS=60		# number of semaphores in system
42#options 	SEMUME=10		# max number of undo entries per process
43#options 	SEMMNU=30		# number of undo structures in system
44options 	SYSVSHM			# System V shared memory
45#options 	SHMMAXPGS=1024		# 1024 pages is the default
46options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
47options 	LKM			# loadable kernel modules
48options 	USERCONF		# userconf(4) support
49#options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
50options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
51
52# Enable experimental buffer queue strategy for better responsiveness under
53# high disk I/O load. Use it with caution - it's not proven to be stable yet.
54#options 	BUFQ_READPRIO
55#options 	BUFQ_PRIOCSCAN
56
57# Debugging options
58#options 	DIAGNOSTIC		# extra kernel sanity checking
59#options 	DEBUG			# extra kernel debugging support
60#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
61options 	DDB			# kernel dynamic debugger
62#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
63#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
64options 	SCSIVERBOSE		# Verbose SCSI errors
65#options 	SCSIDEBUG		# extra SCSI debugging support
66#makeoptions	DEBUG="-g"		# compile full symbol table
67
68# Compatibility options
69options 	COMPAT_43		# compatibility with 4.3BSD binaries
70options 	COMPAT_12		# NetBSD 1.2 binary compatibility
71options 	COMPAT_13		# NetBSD 1.3 binary compatibility
72options 	COMPAT_14		# NetBSD 1.4 binary compatibility
73options 	COMPAT_15		# NetBSD 1.5 binary compatibility
74options 	COMPAT_16		# NetBSD 1.6 binary compatibility
75options 	COMPAT_20		# NetBSD 2.0 binary compatibility
76options 	COMPAT_30		# NetBSD 3.0 compatibility.
77options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out
78
79#options 	COMPAT_SVR4		# binary compatibility with SVR4
80options 	COMPAT_SUNOS		# binary compatibility with SunOS
81#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
82options 	COMPAT_BSDPTY		# /dev/[pt]ty?? ptys.
83
84#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
85
86# Filesystem options
87file-system	FFS		# Berkeley Fast Filesystem
88file-system	LFS		# log-structured file system
89file-system	NFS		# Sun NFS-compatible filesystem client
90file-system	MFS		# memory-based filesystem
91file-system	CD9660		# ISO 9660 + Rock Ridge file system
92file-system	MSDOSFS		# MS-DOS FAT file system
93file-system	KERNFS		# /kern
94file-system	PROCFS		# /proc
95file-system	FDESC		# /dev/fd/*
96file-system	NULLFS		# loopback file system
97file-system 	OVERLAY		# overlay file system
98file-system	PORTAL		# portal filesystem (still experimental)
99file-system	UMAPFS		# NULLFS + uid and gid remapping
100file-system	UNION		# union file system
101#file-system	CODA		# Coda File System; also needs vcode (below)
102file-system	PTYFS		# /dev/pts/N support
103#file-system	TMPFS		# experimental - Efficient memory file-system
104#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
105
106options 	NFSSERVER	# nfs server support
107options 	QUOTA		# ffs quotas
108#options 	FFS_EI		# ffs endian independant support
109options 	SOFTDEP		# ffs soft updates support
110#options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
111#options 	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
112
113# Networking options
114options 	INET		# Internet protocols
115options 	INET6		# IPV6
116#options 	IPSEC		# IP security
117#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
118#options 	IPSEC_NAT_T	# IPsec NAT traversal (NAT-T)
119#options 	IPSEC_DEBUG	# debug for IP security
120#options 	GATEWAY		# IP packet forwarding
121#options 	MROUTING	# IP multicast routing
122#options 	PIM		# Protocol Independent Multicast
123#options 	ISO,TPIP	# OSI
124#options 	EON		# OSI tunneling over IP
125#options 	NETATALK	# AppleTalk networking protocols
126options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
127options 	PPP_DEFLATE	# Deflate compression support for PPP
128options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
129options 	PFIL_HOOKS	# pfil(9) packet filter hooks
130options 	IPFILTER_LOG	# ipmon(8) log support
131#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
132#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
133
134#options 	ALTQ		# Manipulate network interfaces' output queues
135#options 	ALTQ_BLUE	# Stochastic Fair Blue
136#options 	ALTQ_CBQ	# Class-Based Queueing
137#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
138#options 	ALTQ_FIFOQ	# First-In First-Out Queue
139#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
140#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
141#options 	ALTQ_LOCALQ	# Local queueing discipline
142#options 	ALTQ_PRIQ	# Priority Queueing
143#options 	ALTQ_RED	# Random Early Detection
144#options 	ALTQ_RIO	# RED with IN/OUT
145#options 	ALTQ_WFQ	# Weighted Fair Queueing
146
147options 	NFS_BOOT_BOOTPARAM
148options 	NFS_BOOT_DHCP
149
150config	netbsd root on ? type ?
151#config	netbsd root on ? type nfs
152
153#
154# device declarations
155#
156
157mainbus0 at root
158
159# NEWS HYPER-BUS
160hb0	at mainbus0 systype NEWS1700
161hb1	at mainbus0 systype NEWS1200
162
163# interval timer
164timer0	at hb0 addr 0xe1000000 ipl 6			# news1700
165timer0	at hb1 addr 0xe1140000 ipl 6			# news1200
166
167# MK48T02 TOD clock
168mkclock0 at hb0 addr 0xe0d80000				# news1700
169mkclock0 at hb1 addr 0xe1420000				# news1200
170
171# onboard LANCE ethernet
172le0	at hb0 addr 0xe0f00000 ipl 4			# news1700
173le0	at hb1 addr 0xe1a40000 ipl 4			# news1200
174
175# keyboard/mouse
176kbc0	at hb0 addr 0xe0d00000 ipl 5			# news1700
177kb0	at kbc0						# news1700
178ms0	at kbc0						# news1700
179
180kb0	at hb1 addr 0xe1240000 ipl 5			# news1200
181ms0	at hb1 addr 0xe1280000 ipl 5			# news1200
182
183wskbd*	at kb?
184wsmouse* at ms?
185
186# onboard z8530 SCC
187zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0	# news1700
188zsc0	at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1	# news1200
189zstty0	at zsc0 channel 0
190zstty1	at zsc0 channel 1
191
192# Frame buffer devices; not yet
193#fb0	at hb0 addr 0xf0700000			# NWB225
194#fb1	at hb0 addr 0xf0f00000			# NWB512
195
196# onboard uPD72067 FDC; not yet
197#fdc0	at hb0 addr 0xe0c80000 ipl 3
198#fd*	at fdc0
199
200# onboard CXD1180 SCSI controller
201#
202# This driver has several flags which may be enabled using
203# the "flags" directive.  Valid flags are:
204#
205# 0x000ff	Set (1<<target) to disable disconnect/reselect
206# 0x0ff00	Set (1<<(target+8)) to disable parity checking
207# 0x10000	Set this bit to disable DMA interrupts (poll)
208# 0x20000	Set this bit to disable DMA entirely (use PIO)
209#
210# For example: "flags 0x1000f" would disable DMA interrupts,
211# and disable disconnect/reselect for targets 0-3
212#
213si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
214scsibus* at si0
215
216sd*	at scsibus? target ? lun ?		# SCSI disks
217st*	at scsibus? target ? lun ?		# SCSI tapes
218cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
219ch*	at scsibus? target ? lun ?		# SCSI changer devices
220ss*	at scsibus? target ? lun ?		# SCSI scanners
221uk*	at scsibus? target ? lun ?		# unknown SCSI devices
222
223# Misc.
224pseudo-device	loop			# loopback interface; required
225pseudo-device	pty			# pseudo-terminals
226pseudo-device	md		1	# memory disk device
227pseudo-device	vnd			# disk-like interface to files
228#options 	VND_COMPRESSION		# compressed vnd(4)
229pseudo-device	ccd		4	# concatenated and striped disks
230#pseudo-device	cgd		4	# cryptographic disk devices
231pseudo-device	raid		8	# RAIDframe disk driver
232#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
233# Options to enable various other RAIDframe RAID types.
234#options 	RF_INCLUDE_EVENODD=1
235#options 	RF_INCLUDE_RAID5_RS=1
236#options 	RF_INCLUDE_PARITYLOGGING=1
237#options 	RF_INCLUDE_CHAINDECLUSTER=1
238#options 	RF_INCLUDE_INTERDECLUSTER=1
239#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
240#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
241pseudo-device	fss		4	# file system snapshot device
242pseudo-device	sl			# SLIP interfaces
243pseudo-device	ppp			# PPP interfaces
244pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
245pseudo-device	tun			# Network "tunnel" device
246pseudo-device	tap			# virtual Ethernet
247pseudo-device	gre			# generic L3 over IP tunnel
248pseudo-device	bpfilter		# Berkeley Packet Filter
249#pseudo-device	carp			# Common Address Redundancy Protocol
250pseudo-device	ipfilter		# ip filter
251pseudo-device	strip			# Starmode Radio IP (Metricom)
252pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
253#pseudo-device	faith			# IPv[46] tcp relay translation i/f
254pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
255pseudo-device	vlan			# IEEE 802.1q encapsulation
256pseudo-device	bridge			# simple inter-network bridging
257#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
258pseudo-device	rnd			# /dev/random and in-kernle generator
259#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
260pseudo-device	clockctl		# user control of clock subsystem
261pseudo-device	ksyms			# /dev/ksyms
262#pseudo-device	pf			# PF packet filter
263#pseudo-device	pflog			# PF log if
264
265# Veriexec
266#
267# a pseudo device needed for veriexec
268#pseudo-device	veriexec		1
269#
270# Uncomment the fingerprint methods below that are desired. Note that
271# removing fingerprint methods will have almost no impact on the kernel
272# code size.
273#
274#options VERIFIED_EXEC_FP_RMD160
275#options VERIFIED_EXEC_FP_SHA256
276#options VERIFIED_EXEC_FP_SHA384
277#options VERIFIED_EXEC_FP_SHA512
278#options VERIFIED_EXEC_FP_SHA1
279#options VERIFIED_EXEC_FP_MD5
280