GENERIC_TINY revision 1.32
1# 	$NetBSD: GENERIC_TINY,v 1.32 2005/01/17 15:28:52 cube Exp $
2
3#	news68k GENERIC config file for low memory machines;
4#
5include		"arch/news68k/conf/std.news68k"
6
7#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
8
9#ident 		"GENERIC_TINY-$Revision: 1.32 $"
10
11maxusers	4
12
13options 	news1200		# news1200 support
14options 	news1700		# news1[4567]00 support
15options 	CPU_SINGLE		# Will IOP be supported eventually?
16#options 	FPU_EMULATE
17
18# Standard system options
19#options 	NTP			# NTP phase/frequency locked loop
20options 	KTRACE			# system call tracing support
21options 	SYSTRACE		# system call vetting via systrace(1)
22options 	SYSVMSG			# System V message queues
23options 	SYSVSEM			# System V semaphores
24#options 	SEMMNI=10		# number of semaphore identifiers
25#options 	SEMMNS=60		# number of semaphores in system
26#options 	SEMUME=10		# max number of undo entries per process
27#options 	SEMMNU=30		# number of undo structures in system
28options 	SYSVSHM			# System V shared memory
29#options 	SHMMAXPGS=1024		# 1024 pages is the default
30options 	P1003_1B_SEMAPHORE # p1003.1b semaphore support
31options 	LKM			# loadable kernel modules
32options 	USERCONF		# userconf(4) support
33options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
34#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
35options 	MALLOC_NOINLINE		# Not inlining MALLOC saves memory
36
37# Enable experimental buffer queue strategy for better responsiveness under
38# high disk I/O load. Use it with caution - it's not proven to be stable yet.
39#options 	NEW_BUFQ_STRATEGY
40
41# Debugging options
42#options 	DIAGNOSTIC		# extra kernel sanity checking
43#options 	DEBUG			# extra kernel debugging support
44#options 	KMEMSTATS		# kernel memory statistics (vmstat -m)
45#options 	DDB			# kernel dynamic debugger
46#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
47#options 	DDB_ONPANIC=1		# see also sysctl(8): `ddb.onpanic'
48#options 	SCSIVERBOSE		# Verbose SCSI errors
49#options 	SCSIDEBUG		# extra SCSI debugging support
50#makeoptions	DEBUG="-g"		# compile full symbol table
51
52# Compatibility options
53options 	COMPAT_43		# compatibility with 4.3BSD binaries
54options 	COMPAT_12		# NetBSD 1.2 binary compatibility
55options 	COMPAT_13		# NetBSD 1.3 binary compatibility
56options 	COMPAT_14		# NetBSD 1.4 binary compatibility
57options 	COMPAT_15		# NetBSD 1.5 binary compatibility
58options 	COMPAT_16		# NetBSD 1.6 binary compatibility
59options 	COMPAT_20		# NetBSD 2.0 binary compatibility
60options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out
61
62#options 	COMPAT_SVR4		# binary compatibility with SVR4
63#options 	COMPAT_SUNOS		# binary compatibility with SunOS
64#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
65options 	COMPAT_BSDPTY		# /dev/[pt]ty?? ptys.
66
67#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
68
69# Filesystem options
70file-system	FFS		# Berkeley Fast Filesystem
71#file-system	LFS		# log-structured file system
72file-system	NFS		# Sun NFS-compatible filesystem client
73file-system	MFS		# memory-based filesystem
74file-system	CD9660		# ISO 9660 + Rock Ridge file system
75file-system	MSDOSFS		# MS-DOS FAT file system
76file-system	KERNFS		# /kern
77file-system	PROCFS		# /proc
78file-system	FDESC		# /dev/fd/*
79#file-system	NULLFS		# loopback file system
80#file-system 	OVERLAY		# overlay file system
81#file-system	PORTAL		# portal filesystem (still experimental)
82#file-system	UMAPFS		# NULLFS + uid and gid remapping
83#file-system	UNION		# union file system
84#file-system	CODA		# Coda File System; also needs vcode (below)
85
86options 	NFSSERVER	# nfs server support
87#options 	QUOTA		# ffs quotas
88#options 	FFS_EI		# ffs endian independant support
89options 	SOFTDEP		# ffs soft updates support
90options 	VNODE_OP_NOINLINE	# Not inlining vnode op calls saves mem
91
92# Networking options
93options 	INET		# Internet protocols
94options 	INET6		# IPV6
95#options 	IPSEC		# IP security
96#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
97#options 	IPSEC_DEBUG	# debug for IP security
98#options 	GATEWAY		# IP packet forwarding
99#options 	MROUTING	# IP multicast routing
100#options 	PIM		# Protocol Independent Multicast
101#options 	NS		# XNS
102#options 	NSIP		# XNS tunneling over IP
103#options 	ISO,TPIP	# OSI
104#options 	EON		# OSI tunneling over IP
105#options 	CCITT,LLC,HDLC	# X.25
106#options 	NETATALK	# AppleTalk networking protocols
107options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
108options 	PPP_DEFLATE	# Deflate compression support for PPP
109#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
110#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
111#options 	IPFILTER_LOG	# ipmon(8) log support
112#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
113#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
114
115#options 	ALTQ		# Manipulate network interfaces' output queues
116#options 	ALTQ_BLUE	# Stochastic Fair Blue
117#options 	ALTQ_CBQ	# Class-Based Queueing
118#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
119#options 	ALTQ_FIFOQ	# First-In First-Out Queue
120#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
121#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
122#options 	ALTQ_LOCALQ	# Local queueing discipline
123#options 	ALTQ_PRIQ	# Priority Queueing
124#options 	ALTQ_RED	# Random Early Detection
125#options 	ALTQ_RIO	# RED with IN/OUT
126#options 	ALTQ_WFQ	# Weighted Fair Queueing
127
128#options 	NFS_BOOT_BOOTPARAM
129options 	NFS_BOOT_DHCP
130
131config	netbsd root on ? type ?
132#config	netbsd root on ? type nfs
133
134#
135# device declarations
136#
137
138mainbus0 at root
139
140# NEWS HYPER-BUS
141hb0	at mainbus0 systype NEWS1700
142hb1	at mainbus0 systype NEWS1200
143
144# interval timer
145timer0	at hb0 addr 0xe1000000 ipl 6			# news1700
146timer0	at hb1 addr 0xe1140000 ipl 6			# news1200
147
148# MK48T02 TOD clock
149mkclock0 at hb0 addr 0xe0d80000				# news1700
150mkclock0 at hb1 addr 0xe1420000				# news1200
151
152# onboard LANCE ethernet
153le0	at hb0 addr 0xe0f00000 ipl 4			# news1700
154le0	at hb1 addr 0xe1a40000 ipl 4			# news1200
155
156# keyboard/mouse
157kbc0	at hb0 addr 0xe0d00000 ipl 5			# news1700
158kb0	at kbc0						# news1700
159ms0	at kbc0						# news1700
160
161kb0	at hb1 addr 0xe1240000 ipl 5			# news1200
162ms0	at hb1 addr 0xe1280000 ipl 5			# news1200
163
164wskbd*	at kb?
165wsmouse* at ms?
166
167# onboard z8530 SCC
168zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0	# news1700
169zsc0	at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1	# news1200
170zstty0	at zsc0 channel 0
171zstty1	at zsc0 channel 1
172
173# Frame buffer devices; not yet
174#fb0	at hb0 addr 0xf0700000			# NWB225
175#fb1	at hb0 addr 0xf0f00000			# NWB512
176
177# onboard uPD72067 FDC; not yet
178#fdc0	at hb0 addr 0xe0c80000 ipl 3
179#fd*	at fdc0
180
181# onboard CXD1180 SCSI controller
182#
183# This driver has several flags which may be enabled using
184# the "flags" directive.  Valid flags are:
185#
186# 0x000ff	Set (1<<target) to disable disconnect/reselect
187# 0x0ff00	Set (1<<(target+8)) to disable parity checking
188# 0x10000	Set this bit to disable DMA interrupts (poll)
189# 0x20000	Set this bit to disable DMA entirely (use PIO)
190#
191# For example: "flags 0x1000f" would disable DMA interrupts,
192# and disable disconnect/reselect for targets 0-3
193#
194si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
195scsibus* at si0
196
197sd*	at scsibus? target ? lun ?		# SCSI disks
198st*	at scsibus? target ? lun ?		# SCSI tapes
199cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
200#ch*	at scsibus? target ? lun ?		# SCSI changer devices
201#ss*	at scsibus? target ? lun ?		# SCSI scanners
202#uk*	at scsibus? target ? lun ?		# unknown SCSI devices
203
204# Misc.
205pseudo-device	loop			# loopback interface; required
206pseudo-device	pty			# pseudo-terminals
207#pseudo-device	md		1	# memory disk device
208pseudo-device	vnd		4	# disk-like interface to files
209#pseudo-device	ccd		4	# concatenated and striped disks
210#pseudo-device	cgd		4	# cryptographic disk devices
211#pseudo-device	raid		8	# RAIDframe disk driver
212#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
213# Options to enable various other RAIDframe RAID types.
214#options 	RF_INCLUDE_EVENODD=1
215#options 	RF_INCLUDE_RAID5_RS=1
216#options 	RF_INCLUDE_PARITYLOGGING=1
217#options 	RF_INCLUDE_CHAINDECLUSTER=1
218#options 	RF_INCLUDE_INTERDECLUSTER=1
219#options 	RF_INCLUDE_PARITY_DECLUSTERING=1
220#options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
221pseudo-device	sl		2	# SLIP interfaces
222pseudo-device	ppp		2	# PPP interfaces
223pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
224pseudo-device	tun		4	# Network "tunnel" device
225pseudo-device	tap			# virtual Ethernet
226#pseudo-device	gre		2	# generic L3 over IP tunnel
227pseudo-device	bpfilter	16	# Berkeley Packet Filter
228#pseudo-device	ipfilter		# ip filter
229#pseudo-device	strip		1	# Starmode Radio IP (Metricom)
230pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
231#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
232#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
233#pseudo-device	vlan			# IEEE 802.1q encapsulation
234pseudo-device	bridge			# simple inter-network bridging
235#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
236pseudo-device	rnd			# /dev/random and in-kernle generator
237#pseudo-device	vcoda		4	# coda minicache <-> venus comm.
238pseudo-device	clockctl		# user control of clock subsystem
239pseudo-device	ksyms			# /dev/ksyms
240#pseudo-device	pf			# PF packet filter
241#pseudo-device	pflog			# PF log if
242