GENERIC_TINY revision 1.33
1# $NetBSD: GENERIC_TINY,v 1.33 2005/01/28 03:19:50 rumble Exp $ 2 3# news68k GENERIC config file for low memory machines; 4# 5include "arch/news68k/conf/std.news68k" 6 7#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 8 9#ident "GENERIC_TINY-$Revision: 1.33 $" 10 11maxusers 4 12 13options news1200 # news1200 support 14options news1700 # news1[4567]00 support 15options CPU_SINGLE # Will IOP be supported eventually? 16#options FPU_EMULATE 17 18# Standard system options 19#options NTP # NTP phase/frequency locked loop 20options KTRACE # system call tracing support 21options SYSTRACE # system call vetting via systrace(1) 22options SYSVMSG # System V message queues 23options SYSVSEM # System V semaphores 24#options SEMMNI=10 # number of semaphore identifiers 25#options SEMMNS=60 # number of semaphores in system 26#options SEMUME=10 # max number of undo entries per process 27#options SEMMNU=30 # number of undo structures in system 28options SYSVSHM # System V shared memory 29#options SHMMAXPGS=1024 # 1024 pages is the default 30options P1003_1B_SEMAPHORE # p1003.1b semaphore support 31options LKM # loadable kernel modules 32options USERCONF # userconf(4) support 33options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 34#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 35options MALLOC_NOINLINE # Not inlining MALLOC saves memory 36 37# Enable experimental buffer queue strategy for better responsiveness under 38# high disk I/O load. Use it with caution - it's not proven to be stable yet. 39#options NEW_BUFQ_STRATEGY 40 41# Debugging options 42#options DIAGNOSTIC # extra kernel sanity checking 43#options DEBUG # extra kernel debugging support 44#options KMEMSTATS # kernel memory statistics (vmstat -m) 45#options DDB # kernel dynamic debugger 46#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 47#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 48#options SCSIVERBOSE # Verbose SCSI errors 49#options SCSIDEBUG # extra SCSI debugging support 50#makeoptions DEBUG="-g" # compile full symbol table 51 52# Compatibility options 53options COMPAT_43 # compatibility with 4.3BSD binaries 54options COMPAT_12 # NetBSD 1.2 binary compatibility 55options COMPAT_13 # NetBSD 1.3 binary compatibility 56options COMPAT_14 # NetBSD 1.4 binary compatibility 57options COMPAT_15 # NetBSD 1.5 binary compatibility 58options COMPAT_16 # NetBSD 1.6 binary compatibility 59options COMPAT_20 # NetBSD 2.0 binary compatibility 60options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 61 62#options COMPAT_SVR4 # binary compatibility with SVR4 63#options COMPAT_SUNOS # binary compatibility with SunOS 64#options COMPAT_LINUX # binary compatibllity with Linux/m68k 65options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 66 67#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 68 69# Filesystem options 70file-system FFS # Berkeley Fast Filesystem 71#file-system LFS # log-structured file system 72file-system NFS # Sun NFS-compatible filesystem client 73file-system MFS # memory-based filesystem 74file-system CD9660 # ISO 9660 + Rock Ridge file system 75file-system MSDOSFS # MS-DOS FAT file system 76file-system KERNFS # /kern 77file-system PROCFS # /proc 78file-system FDESC # /dev/fd/* 79#file-system NULLFS # loopback file system 80#file-system OVERLAY # overlay file system 81#file-system PORTAL # portal filesystem (still experimental) 82#file-system UMAPFS # NULLFS + uid and gid remapping 83#file-system UNION # union file system 84#file-system CODA # Coda File System; also needs vcode (below) 85 86options NFSSERVER # nfs server support 87#options QUOTA # ffs quotas 88#options FFS_EI # ffs endian independant support 89options SOFTDEP # ffs soft updates support 90#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 91options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 92 93# Networking options 94options INET # Internet protocols 95options INET6 # IPV6 96#options IPSEC # IP security 97#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 98#options IPSEC_DEBUG # debug for IP security 99#options GATEWAY # IP packet forwarding 100#options MROUTING # IP multicast routing 101#options PIM # Protocol Independent Multicast 102#options NS # XNS 103#options NSIP # XNS tunneling over IP 104#options ISO,TPIP # OSI 105#options EON # OSI tunneling over IP 106#options CCITT,LLC,HDLC # X.25 107#options NETATALK # AppleTalk networking protocols 108options PPP_BSDCOMP # BSD-Compress compression support for PPP 109options PPP_DEFLATE # Deflate compression support for PPP 110#options PPP_FILTER # Active filter support for PPP (requires bpf) 111#options PFIL_HOOKS # pfil(9) packet filter hooks 112#options IPFILTER_LOG # ipmon(8) log support 113#options IPFILTER_DEFAULT_BLOCK # block all packets by default 114#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 115 116#options ALTQ # Manipulate network interfaces' output queues 117#options ALTQ_BLUE # Stochastic Fair Blue 118#options ALTQ_CBQ # Class-Based Queueing 119#options ALTQ_CDNR # Diffserv Traffic Conditioner 120#options ALTQ_FIFOQ # First-In First-Out Queue 121#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 122#options ALTQ_HFSC # Hierarchical Fair Service Curve 123#options ALTQ_LOCALQ # Local queueing discipline 124#options ALTQ_PRIQ # Priority Queueing 125#options ALTQ_RED # Random Early Detection 126#options ALTQ_RIO # RED with IN/OUT 127#options ALTQ_WFQ # Weighted Fair Queueing 128 129#options NFS_BOOT_BOOTPARAM 130options NFS_BOOT_DHCP 131 132config netbsd root on ? type ? 133#config netbsd root on ? type nfs 134 135# 136# device declarations 137# 138 139mainbus0 at root 140 141# NEWS HYPER-BUS 142hb0 at mainbus0 systype NEWS1700 143hb1 at mainbus0 systype NEWS1200 144 145# interval timer 146timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 147timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 148 149# MK48T02 TOD clock 150mkclock0 at hb0 addr 0xe0d80000 # news1700 151mkclock0 at hb1 addr 0xe1420000 # news1200 152 153# onboard LANCE ethernet 154le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 155le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 156 157# keyboard/mouse 158kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 159kb0 at kbc0 # news1700 160ms0 at kbc0 # news1700 161 162kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 163ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 164 165wskbd* at kb? 166wsmouse* at ms? 167 168# onboard z8530 SCC 169zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 170zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 171zstty0 at zsc0 channel 0 172zstty1 at zsc0 channel 1 173 174# Frame buffer devices; not yet 175#fb0 at hb0 addr 0xf0700000 # NWB225 176#fb1 at hb0 addr 0xf0f00000 # NWB512 177 178# onboard uPD72067 FDC; not yet 179#fdc0 at hb0 addr 0xe0c80000 ipl 3 180#fd* at fdc0 181 182# onboard CXD1180 SCSI controller 183# 184# This driver has several flags which may be enabled using 185# the "flags" directive. Valid flags are: 186# 187# 0x000ff Set (1<<target) to disable disconnect/reselect 188# 0x0ff00 Set (1<<(target+8)) to disable parity checking 189# 0x10000 Set this bit to disable DMA interrupts (poll) 190# 0x20000 Set this bit to disable DMA entirely (use PIO) 191# 192# For example: "flags 0x1000f" would disable DMA interrupts, 193# and disable disconnect/reselect for targets 0-3 194# 195si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 196scsibus* at si0 197 198sd* at scsibus? target ? lun ? # SCSI disks 199st* at scsibus? target ? lun ? # SCSI tapes 200cd* at scsibus? target ? lun ? # SCSI CD-ROMs 201#ch* at scsibus? target ? lun ? # SCSI changer devices 202#ss* at scsibus? target ? lun ? # SCSI scanners 203#uk* at scsibus? target ? lun ? # unknown SCSI devices 204 205# Misc. 206pseudo-device loop # loopback interface; required 207pseudo-device pty # pseudo-terminals 208#pseudo-device md 1 # memory disk device 209pseudo-device vnd 4 # disk-like interface to files 210#pseudo-device ccd 4 # concatenated and striped disks 211#pseudo-device cgd 4 # cryptographic disk devices 212#pseudo-device raid 8 # RAIDframe disk driver 213#options RAID_AUTOCONFIG # auto-configuration of RAID components 214# Options to enable various other RAIDframe RAID types. 215#options RF_INCLUDE_EVENODD=1 216#options RF_INCLUDE_RAID5_RS=1 217#options RF_INCLUDE_PARITYLOGGING=1 218#options RF_INCLUDE_CHAINDECLUSTER=1 219#options RF_INCLUDE_INTERDECLUSTER=1 220#options RF_INCLUDE_PARITY_DECLUSTERING=1 221#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 222pseudo-device sl 2 # SLIP interfaces 223pseudo-device ppp 2 # PPP interfaces 224pseudo-device pppoe # PPP over Ethernet (RFC 2516) 225pseudo-device tun 4 # Network "tunnel" device 226pseudo-device tap # virtual Ethernet 227#pseudo-device gre 2 # generic L3 over IP tunnel 228pseudo-device bpfilter 16 # Berkeley Packet Filter 229#pseudo-device ipfilter # ip filter 230#pseudo-device strip 1 # Starmode Radio IP (Metricom) 231pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 232#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 233#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 234#pseudo-device vlan # IEEE 802.1q encapsulation 235pseudo-device bridge # simple inter-network bridging 236#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 237pseudo-device rnd # /dev/random and in-kernle generator 238#pseudo-device vcoda 4 # coda minicache <-> venus comm. 239pseudo-device clockctl # user control of clock subsystem 240pseudo-device ksyms # /dev/ksyms 241#pseudo-device pf # PF packet filter 242#pseudo-device pflog # PF log if 243