GENERIC_TINY revision 1.37
1# $NetBSD: GENERIC_TINY,v 1.37 2005/06/09 14:43:30 tsutsui Exp $ 2 3# news68k GENERIC config file for low memory machines; 4# 5include "arch/news68k/conf/std.news68k" 6 7#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 8 9#ident "GENERIC_TINY-$Revision: 1.37 $" 10 11maxusers 4 12 13options news1200 # news1200 support 14options news1700 # news1[4567]00 support 15options CPU_SINGLE # Will IOP be supported eventually? 16#options FPU_EMULATE 17 18# Standard system options 19#options NTP # NTP phase/frequency locked loop 20options KTRACE # system call tracing support 21options SYSTRACE # system call vetting via systrace(1) 22options SYSVMSG # System V message queues 23options SYSVSEM # System V semaphores 24#options SEMMNI=10 # number of semaphore identifiers 25#options SEMMNS=60 # number of semaphores in system 26#options SEMUME=10 # max number of undo entries per process 27#options SEMMNU=30 # number of undo structures in system 28options SYSVSHM # System V shared memory 29#options SHMMAXPGS=1024 # 1024 pages is the default 30options P1003_1B_SEMAPHORE # p1003.1b semaphore support 31options LKM # loadable kernel modules 32options USERCONF # userconf(4) support 33options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 34#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 35options MALLOC_NOINLINE # Not inlining MALLOC saves memory 36 37# Enable experimental buffer queue strategy for better responsiveness under 38# high disk I/O load. Use it with caution - it's not proven to be stable yet. 39#options BUFQ_READPRIO 40#options BUFQ_PRIOCSCAN 41 42# Debugging options 43#options DIAGNOSTIC # extra kernel sanity checking 44#options DEBUG # extra kernel debugging support 45#options KMEMSTATS # kernel memory statistics (vmstat -m) 46#options DDB # kernel dynamic debugger 47#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 48#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 49#options SCSIVERBOSE # Verbose SCSI errors 50#options SCSIDEBUG # extra SCSI debugging support 51#makeoptions DEBUG="-g" # compile full symbol table 52 53# Compatibility options 54options COMPAT_43 # compatibility with 4.3BSD binaries 55options COMPAT_12 # NetBSD 1.2 binary compatibility 56options COMPAT_13 # NetBSD 1.3 binary compatibility 57options COMPAT_14 # NetBSD 1.4 binary compatibility 58options COMPAT_15 # NetBSD 1.5 binary compatibility 59options COMPAT_16 # NetBSD 1.6 binary compatibility 60options COMPAT_20 # NetBSD 2.0 binary compatibility 61options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 62 63#options COMPAT_SVR4 # binary compatibility with SVR4 64#options COMPAT_SUNOS # binary compatibility with SunOS 65#options COMPAT_LINUX # binary compatibllity with Linux/m68k 66options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 67 68#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 69 70# Filesystem options 71file-system FFS # Berkeley Fast Filesystem 72#file-system LFS # log-structured file system 73file-system NFS # Sun NFS-compatible filesystem client 74file-system MFS # memory-based filesystem 75file-system CD9660 # ISO 9660 + Rock Ridge file system 76file-system MSDOSFS # MS-DOS FAT file system 77file-system KERNFS # /kern 78file-system PROCFS # /proc 79file-system FDESC # /dev/fd/* 80#file-system NULLFS # loopback file system 81#file-system OVERLAY # overlay file system 82#file-system PORTAL # portal filesystem (still experimental) 83#file-system UMAPFS # NULLFS + uid and gid remapping 84#file-system UNION # union file system 85#file-system CODA # Coda File System; also needs vcode (below) 86 87options NFSSERVER # nfs server support 88#options QUOTA # ffs quotas 89#options FFS_EI # ffs endian independant support 90options SOFTDEP # ffs soft updates support 91#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 92options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 93#options FFS_NO_SNAPSHOT # ffs snapshots 94 95# Networking options 96options INET # Internet protocols 97options INET6 # IPV6 98#options IPSEC # IP security 99#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 100#options IPSEC_DEBUG # debug for IP security 101#options GATEWAY # IP packet forwarding 102#options MROUTING # IP multicast routing 103#options PIM # Protocol Independent Multicast 104#options NS # XNS 105#options NSIP # XNS tunneling over IP 106#options ISO,TPIP # OSI 107#options EON # OSI tunneling over IP 108#options CCITT,LLC,HDLC # X.25 109#options NETATALK # AppleTalk networking protocols 110options PPP_BSDCOMP # BSD-Compress compression support for PPP 111options PPP_DEFLATE # Deflate compression support for PPP 112#options PPP_FILTER # Active filter support for PPP (requires bpf) 113#options PFIL_HOOKS # pfil(9) packet filter hooks 114#options IPFILTER_LOG # ipmon(8) log support 115#options IPFILTER_DEFAULT_BLOCK # block all packets by default 116#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 117 118#options ALTQ # Manipulate network interfaces' output queues 119#options ALTQ_BLUE # Stochastic Fair Blue 120#options ALTQ_CBQ # Class-Based Queueing 121#options ALTQ_CDNR # Diffserv Traffic Conditioner 122#options ALTQ_FIFOQ # First-In First-Out Queue 123#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 124#options ALTQ_HFSC # Hierarchical Fair Service Curve 125#options ALTQ_LOCALQ # Local queueing discipline 126#options ALTQ_PRIQ # Priority Queueing 127#options ALTQ_RED # Random Early Detection 128#options ALTQ_RIO # RED with IN/OUT 129#options ALTQ_WFQ # Weighted Fair Queueing 130 131#options NFS_BOOT_BOOTPARAM 132options NFS_BOOT_DHCP 133 134config netbsd root on ? type ? 135#config netbsd root on ? type nfs 136 137# 138# device declarations 139# 140 141mainbus0 at root 142 143# NEWS HYPER-BUS 144hb0 at mainbus0 systype NEWS1700 145hb1 at mainbus0 systype NEWS1200 146 147# interval timer 148timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 149timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 150 151# MK48T02 TOD clock 152mkclock0 at hb0 addr 0xe0d80000 # news1700 153mkclock0 at hb1 addr 0xe1420000 # news1200 154 155# onboard LANCE ethernet 156le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 157le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 158 159# keyboard/mouse 160kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 161kb0 at kbc0 # news1700 162ms0 at kbc0 # news1700 163 164kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 165ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 166 167wskbd* at kb? 168wsmouse* at ms? 169 170# onboard z8530 SCC 171zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 172zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 173zstty0 at zsc0 channel 0 174zstty1 at zsc0 channel 1 175 176# Frame buffer devices; not yet 177#fb0 at hb0 addr 0xf0700000 # NWB225 178#fb1 at hb0 addr 0xf0f00000 # NWB512 179 180# onboard uPD72067 FDC; not yet 181#fdc0 at hb0 addr 0xe0c80000 ipl 3 182#fd* at fdc0 183 184# onboard CXD1180 SCSI controller 185# 186# This driver has several flags which may be enabled using 187# the "flags" directive. Valid flags are: 188# 189# 0x000ff Set (1<<target) to disable disconnect/reselect 190# 0x0ff00 Set (1<<(target+8)) to disable parity checking 191# 0x10000 Set this bit to disable DMA interrupts (poll) 192# 0x20000 Set this bit to disable DMA entirely (use PIO) 193# 194# For example: "flags 0x1000f" would disable DMA interrupts, 195# and disable disconnect/reselect for targets 0-3 196# 197si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 198scsibus* at si0 199 200sd* at scsibus? target ? lun ? # SCSI disks 201st* at scsibus? target ? lun ? # SCSI tapes 202cd* at scsibus? target ? lun ? # SCSI CD-ROMs 203#ch* at scsibus? target ? lun ? # SCSI changer devices 204#ss* at scsibus? target ? lun ? # SCSI scanners 205#uk* at scsibus? target ? lun ? # unknown SCSI devices 206 207# Misc. 208pseudo-device loop # loopback interface; required 209pseudo-device pty # pseudo-terminals 210#pseudo-device md 1 # memory disk device 211pseudo-device vnd 4 # disk-like interface to files 212#pseudo-device ccd 4 # concatenated and striped disks 213#pseudo-device cgd 4 # cryptographic disk devices 214#pseudo-device raid 8 # RAIDframe disk driver 215#options RAID_AUTOCONFIG # auto-configuration of RAID components 216# Options to enable various other RAIDframe RAID types. 217#options RF_INCLUDE_EVENODD=1 218#options RF_INCLUDE_RAID5_RS=1 219#options RF_INCLUDE_PARITYLOGGING=1 220#options RF_INCLUDE_CHAINDECLUSTER=1 221#options RF_INCLUDE_INTERDECLUSTER=1 222#options RF_INCLUDE_PARITY_DECLUSTERING=1 223#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 224pseudo-device fss 4 # file system snapshot device 225pseudo-device sl 2 # SLIP interfaces 226pseudo-device ppp 2 # PPP interfaces 227pseudo-device pppoe # PPP over Ethernet (RFC 2516) 228pseudo-device tun 4 # Network "tunnel" device 229pseudo-device tap # virtual Ethernet 230#pseudo-device gre 2 # generic L3 over IP tunnel 231pseudo-device bpfilter 16 # Berkeley Packet Filter 232#pseudo-device ipfilter # ip filter 233#pseudo-device strip 1 # Starmode Radio IP (Metricom) 234pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 235#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 236#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 237#pseudo-device vlan # IEEE 802.1q encapsulation 238pseudo-device bridge # simple inter-network bridging 239#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 240pseudo-device rnd # /dev/random and in-kernle generator 241#pseudo-device vcoda 4 # coda minicache <-> venus comm. 242pseudo-device clockctl # user control of clock subsystem 243pseudo-device ksyms # /dev/ksyms 244#pseudo-device pf # PF packet filter 245#pseudo-device pflog # PF log if 246