GENERIC_TINY revision 1.45
1# $NetBSD: GENERIC_TINY,v 1.45 2005/08/20 03:42:01 tsutsui Exp $ 2 3# news68k GENERIC config file for low memory machines; 4# 5include "arch/news68k/conf/std.news68k" 6 7#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 8 9#ident "GENERIC_TINY-$Revision: 1.45 $" 10 11maxusers 4 12 13options news1200 # news1200 support 14options news1700 # news1[4567]00 support 15options CPU_SINGLE # Will IOP be supported eventually? 16#options FPU_EMULATE 17 18# Standard system options 19#options NTP # NTP phase/frequency locked loop 20options KTRACE # system call tracing support 21options SYSTRACE # system call vetting via systrace(1) 22options SYSVMSG # System V message queues 23options SYSVSEM # System V semaphores 24#options SEMMNI=10 # number of semaphore identifiers 25#options SEMMNS=60 # number of semaphores in system 26#options SEMUME=10 # max number of undo entries per process 27#options SEMMNU=30 # number of undo structures in system 28options SYSVSHM # System V shared memory 29#options SHMMAXPGS=1024 # 1024 pages is the default 30options P1003_1B_SEMAPHORE # p1003.1b semaphore support 31options LKM # loadable kernel modules 32options USERCONF # userconf(4) support 33options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 34#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 35options MALLOC_NOINLINE # Not inlining MALLOC saves memory 36 37# Enable experimental buffer queue strategy for better responsiveness under 38# high disk I/O load. Use it with caution - it's not proven to be stable yet. 39#options BUFQ_READPRIO 40#options BUFQ_PRIOCSCAN 41 42# Debugging options 43#options DIAGNOSTIC # extra kernel sanity checking 44#options DEBUG # extra kernel debugging support 45#options KMEMSTATS # kernel memory statistics (vmstat -m) 46#options DDB # kernel dynamic debugger 47#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 48#options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 49#options SCSIVERBOSE # Verbose SCSI errors 50#options SCSIDEBUG # extra SCSI debugging support 51#makeoptions DEBUG="-g" # compile full symbol table 52 53# Compatibility options 54options COMPAT_43 # compatibility with 4.3BSD binaries 55options COMPAT_12 # NetBSD 1.2 binary compatibility 56options COMPAT_13 # NetBSD 1.3 binary compatibility 57options COMPAT_14 # NetBSD 1.4 binary compatibility 58options COMPAT_15 # NetBSD 1.5 binary compatibility 59options COMPAT_16 # NetBSD 1.6 binary compatibility 60options COMPAT_20 # NetBSD 2.0 binary compatibility 61options COMPAT_30 # NetBSD 3.0 compatibility. 62options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 63 64#options COMPAT_SVR4 # binary compatibility with SVR4 65#options COMPAT_SUNOS # binary compatibility with SunOS 66#options COMPAT_LINUX # binary compatibllity with Linux/m68k 67options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 68 69#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 70 71# Filesystem options 72file-system FFS # Berkeley Fast Filesystem 73#file-system LFS # log-structured file system 74file-system NFS # Sun NFS-compatible filesystem client 75file-system MFS # memory-based filesystem 76file-system CD9660 # ISO 9660 + Rock Ridge file system 77file-system MSDOSFS # MS-DOS FAT file system 78file-system KERNFS # /kern 79file-system PROCFS # /proc 80file-system FDESC # /dev/fd/* 81#file-system NULLFS # loopback file system 82#file-system OVERLAY # overlay file system 83#file-system PORTAL # portal filesystem (still experimental) 84#file-system UMAPFS # NULLFS + uid and gid remapping 85#file-system UNION # union file system 86#file-system CODA # Coda File System; also needs vcode (below) 87file-system PTYFS # /dev/pts/N support 88 89options NFSSERVER # nfs server support 90#options QUOTA # ffs quotas 91#options FFS_EI # ffs endian independant support 92options SOFTDEP # ffs soft updates support 93#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 94options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 95#options FFS_NO_SNAPSHOT # ffs snapshots 96 97# Networking options 98options INET # Internet protocols 99options INET6 # IPV6 100#options IPSEC # IP security 101#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 102#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # IP packet forwarding 105#options MROUTING # IP multicast routing 106#options PIM # Protocol Independent Multicast 107#options NS # XNS 108#options NSIP # XNS tunneling over IP 109#options ISO,TPIP # OSI 110#options EON # OSI tunneling over IP 111#options CCITT,LLC,HDLC # X.25 112#options NETATALK # AppleTalk networking protocols 113options PPP_BSDCOMP # BSD-Compress compression support for PPP 114options PPP_DEFLATE # Deflate compression support for PPP 115#options PPP_FILTER # Active filter support for PPP (requires bpf) 116#options PFIL_HOOKS # pfil(9) packet filter hooks 117#options IPFILTER_LOG # ipmon(8) log support 118#options IPFILTER_DEFAULT_BLOCK # block all packets by default 119#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 120 121#options ALTQ # Manipulate network interfaces' output queues 122#options ALTQ_BLUE # Stochastic Fair Blue 123#options ALTQ_CBQ # Class-Based Queueing 124#options ALTQ_CDNR # Diffserv Traffic Conditioner 125#options ALTQ_FIFOQ # First-In First-Out Queue 126#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 127#options ALTQ_HFSC # Hierarchical Fair Service Curve 128#options ALTQ_LOCALQ # Local queueing discipline 129#options ALTQ_PRIQ # Priority Queueing 130#options ALTQ_RED # Random Early Detection 131#options ALTQ_RIO # RED with IN/OUT 132#options ALTQ_WFQ # Weighted Fair Queueing 133 134#options NFS_BOOT_BOOTPARAM 135options NFS_BOOT_DHCP 136 137config netbsd root on ? type ? 138#config netbsd root on ? type nfs 139 140# 141# device declarations 142# 143 144mainbus0 at root 145 146# NEWS HYPER-BUS 147hb0 at mainbus0 systype NEWS1700 148hb1 at mainbus0 systype NEWS1200 149 150# interval timer 151timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 152timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 153 154# MK48T02 TOD clock 155mkclock0 at hb0 addr 0xe0d80000 # news1700 156mkclock0 at hb1 addr 0xe1420000 # news1200 157 158# onboard LANCE ethernet 159le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 160le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 161 162# keyboard/mouse 163kbc0 at hb0 addr 0xe0d00000 ipl 5 # news1700 164kb0 at kbc0 # news1700 165ms0 at kbc0 # news1700 166 167kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 168ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 169 170wskbd* at kb? 171wsmouse* at ms? 172 173# onboard z8530 SCC 174zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 175zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 176zstty0 at zsc0 channel 0 177zstty1 at zsc0 channel 1 178 179# Frame buffer devices; not yet 180#fb0 at hb0 addr 0xf0700000 # NWB225 181#fb1 at hb0 addr 0xf0f00000 # NWB512 182 183# onboard uPD72067 FDC; not yet 184#fdc0 at hb0 addr 0xe0c80000 ipl 3 185#fd* at fdc0 186 187# onboard CXD1180 SCSI controller 188# 189# This driver has several flags which may be enabled using 190# the "flags" directive. Valid flags are: 191# 192# 0x000ff Set (1<<target) to disable disconnect/reselect 193# 0x0ff00 Set (1<<(target+8)) to disable parity checking 194# 0x10000 Set this bit to disable DMA interrupts (poll) 195# 0x20000 Set this bit to disable DMA entirely (use PIO) 196# 197# For example: "flags 0x1000f" would disable DMA interrupts, 198# and disable disconnect/reselect for targets 0-3 199# 200si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 201scsibus* at si0 202 203sd* at scsibus? target ? lun ? # SCSI disks 204st* at scsibus? target ? lun ? # SCSI tapes 205cd* at scsibus? target ? lun ? # SCSI CD-ROMs 206#ch* at scsibus? target ? lun ? # SCSI changer devices 207#ss* at scsibus? target ? lun ? # SCSI scanners 208#uk* at scsibus? target ? lun ? # unknown SCSI devices 209 210# Misc. 211pseudo-device loop # loopback interface; required 212pseudo-device pty # pseudo-terminals 213#pseudo-device md 1 # memory disk device 214pseudo-device vnd 4 # disk-like interface to files 215#options VND_COMPRESSION # compressed vnd(4) 216#pseudo-device ccd 4 # concatenated and striped disks 217#pseudo-device cgd 4 # cryptographic disk devices 218#pseudo-device raid 8 # RAIDframe disk driver 219#options RAID_AUTOCONFIG # auto-configuration of RAID components 220# Options to enable various other RAIDframe RAID types. 221#options RF_INCLUDE_EVENODD=1 222#options RF_INCLUDE_RAID5_RS=1 223#options RF_INCLUDE_PARITYLOGGING=1 224#options RF_INCLUDE_CHAINDECLUSTER=1 225#options RF_INCLUDE_INTERDECLUSTER=1 226#options RF_INCLUDE_PARITY_DECLUSTERING=1 227#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 228pseudo-device fss 4 # file system snapshot device 229pseudo-device sl 2 # SLIP interfaces 230pseudo-device ppp 2 # PPP interfaces 231pseudo-device pppoe # PPP over Ethernet (RFC 2516) 232pseudo-device tun 4 # Network "tunnel" device 233pseudo-device tap # virtual Ethernet 234#pseudo-device gre 2 # generic L3 over IP tunnel 235pseudo-device bpfilter 16 # Berkeley Packet Filter 236#pseudo-device ipfilter # ip filter 237#pseudo-device strip 1 # Starmode Radio IP (Metricom) 238pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 239#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 240#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 241#pseudo-device vlan # IEEE 802.1q encapsulation 242pseudo-device bridge # simple inter-network bridging 243#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 244pseudo-device rnd # /dev/random and in-kernle generator 245#pseudo-device vcoda 4 # coda minicache <-> venus comm. 246pseudo-device clockctl # user control of clock subsystem 247pseudo-device ksyms # /dev/ksyms 248#pseudo-device pf # PF packet filter 249#pseudo-device pflog # PF log if 250