xref: /src/sys/arch/news68k/conf/INSTALL

# 	$NetBSD: INSTALL,v 1.1 1999/12/09 14:53:02 tsutsui Exp $

#	config for bootable floppy kernel
#
include		"arch/news68k/conf/std.news68k"

maxusers	8

options 	news1700		# only news1700 is supported 
options 	CPU_SINGLE		# Will IOP be supported eventually?
#options 	FPU_EMULATE

options 	MEMORY_DISK_HOOKS
options 	MEMORY_DISK_IS_ROOT	# Force root on ram-disk
options 	MEMORY_DISK_SERVER=0	# no userspace memory disk support
options 	MINIROOTSIZE=4096	# 2 Megabytes

makeoptions	COPTS="-Os"

# Standard system options
#options 	KTRACE			# system call tracing support
#options 	SYSVMSG			# System V message queues
#options 	SYSVSEM			# System V semaphores
#options 	SYSVSHM			# System V shared memory
#optoins 	SHMMAXPGS=1024		# 1024 pages is the default
#options 	LKM			# loadable kernel modules
#options 	NKMEMCLUSTERS=1024	# 4K pages in kernel malloc pool
#options 	UCONSOLE		# users can redirect console (unsafe)

# Debugging options
#options 	DDB			# kernel dynamic debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	DEBUG			# extra kernel debugging support
#options 	DIAGNOSTIC		# extra kernel sanity checking
#options 	SCSIVERBOSE		# Verbose SCSI errors
#options 	SCSIDEBUG

# Compatibility options
options 	COMPAT_43		# compatibility with 4.3BSD binaries
options 	COMPAT_13		# NetBSD 1.3 binary compatibility
options 	COMPAT_14		# NetBSD 1.4 binary compatibility
#options 	TCP_COMPAT_42		# compatibility with 4.2BSD TCP/IP

# Filesystem options
file-system	FFS		# Berkeley Fast Filesystem
file-system	NFS		# Sun NFS-compatible filesystem client
file-system	MFS		# memory-based filesystem
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS FAT file system
file-system	KERNFS		# /kern
#file-system	PROCFS		# /proc
#file-system	FDESC		# /dev/fd/*
#file-system	NULLFS		# loopback file system
#file-system	UNION		# union file system 

#options 	NFSSERVER	# nfs server support
#options 	QUOTA		# ffs quotas
#options 	FFS_EI		# ffs endian independant support

# Networking options
options 	INET		# Internet protocols
#options 	GATEWAY		# IP packet forwarding
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support
#options 	NFS_BOOT_BOOTPARAM

config	netbsd root on ? type ?

#
# device declarations
#

mainbus0 at root

# NEWS HYPER-BUS
hb0	at mainbus0

# MK48T02 realtime clock
clock0	at hb0 addr 0xe0d807f8 ipl 6

# onboard LANCE ethernet
le0	at hb0 addr 0xe0f00000 ipl 4

# keyboard/mouse; not yet
#kb0	at hb0 addr 0xe0d00000 ipl 5
#ms0	at hb0 addr 0xe0d00000 ipl 5

# onboard z8530 SCC
zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64
zstty0	at zsc0 channel 0
zstty1	at zsc0 channel 1

# Frame buffer devices; not yet
#fb0	at hb0 addr 0xf0700000			# NWB225
#fb1	at hb0 addr 0xf0f00000			# NWB512

# onboard uPD72067 FDC; not yet
#fdc0	at hb0 addr 0xe0c80000 ipl 3
#fd*	at fdc0

# onboard CXD1180 SCSI controller
#
# This driver has several flags which may be enabled using
# the "flags" directive.  Valid flags are:
#
# 0x000ff	Set (1<<target) to disable disconnect/reselect
# 0x0ff00	Set (1<<(target+8)) to disable parity checking
# 0x10000	Set this bit to disable DMA interrupts (poll)
# 0x20000	Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
#
si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
scsibus* at si0	

sd*	at scsibus? target ? lun ?		# SCSI disks
st*	at scsibus? target ? lun ?		# SCSI tapes
cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs

# Misc.
pseudo-device	loop			# loopback interface; required
pseudo-device	pty		32	# pseudo-terminals
pseudo-device	md		1	# memory disk device
pseudo-device	sl		2	# SLIP interfaces
pseudo-device	ppp		2	# PPP interfaces