INSTALL revision 1.12 1 # $NetBSD: INSTALL,v 1.12 2001/07/07 15:27:20 tsutsui Exp $
2
3 # config for bootable floppy kernel
4 #
5 include "arch/news68k/conf/std.news68k"
6
7 makeoptions COPTS="-Os" # Optimise for space. Implies -O2
8
9 maxusers 4
10
11 options news1200 # news1200 support
12 options news1700 # news1[4567]00 support
13 options CPU_SINGLE # Will IOP be supported eventually?
14 #options FPU_EMULATE
15
16 options MEMORY_DISK_HOOKS
17 options MEMORY_DISK_IS_ROOT # Force root on ram-disk
18 options MEMORY_DISK_SERVER=0 # no userspace memory disk support
19 options MINIROOTSIZE=2880 # 1.44 Megabytes
20
21 # Standard system options
22 #options KTRACE # system call tracing support
23 #options SYSVMSG # System V message queues
24 #options SYSVSEM # System V semaphores
25 #options SYSVSHM # System V shared memory
26 #options SHMMAXPGS=1024 # 1024 pages is the default
27 #options LKM # loadable kernel modules
28 #options UCONSOLE # users can redirect console (unsafe)
29
30 # Debugging options
31 #options DDB # kernel dynamic debugger
32 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
33 #options DEBUG # extra kernel debugging support
34 #options DIAGNOSTIC # extra kernel sanity checking
35 #options SCSIVERBOSE # Verbose SCSI errors
36
37 # Compatibility options
38 #options COMPAT_43 # compatibility with 4.3BSD binaries
39 #options COMPAT_13 # NetBSD 1.3 binary compatibility
40 #options COMPAT_14 # NetBSD 1.4 binary compatibility
41 #options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
42
43 # File systems
44 file-system FFS # Berkeley Fast Filesystem
45 file-system NFS # Sun NFS-compatible filesystem client
46 file-system MFS # memory-based filesystem
47 file-system CD9660 # ISO 9660 + Rock Ridge file system
48 file-system MSDOSFS # MS-DOS FAT file system
49 #file-system KERNFS # /kern
50 #file-system PROCFS # /proc
51 #file-system FDESC # /dev/fd/*
52 #file-system NULLFS # loopback file system
53 #file-system UNION # union file system
54
55 # Filesystem options
56 #options NFSSERVER # nfs server support
57 #options QUOTA # ffs quotas
58 #options FFS_EI # ffs endian independant support
59 options NFS_V2_ONLY # Exclude NFS3 and NQNFS code to save space
60 options VNODE_OP_NOINLINE # Save space by not inlining vnode op calls
61
62 # Networking options
63 options INET # Internet protocols
64 #options GATEWAY # IP packet forwarding
65 #options PFIL_HOOKS # pfil(9) packet filter hooks
66 #options IPFILTER_LOG # ipmon(8) log support
67 #options NFS_BOOT_BOOTPARAM
68
69 config netbsd root on ? type ? dumps on none
70
71 #
72 # device declarations
73 #
74
75 mainbus0 at root
76
77 # NEWS HYPER-BUS
78 hb0 at mainbus0 systype NEWS1700
79 hb1 at mainbus0 systype NEWS1200
80
81 # interval timer
82 timer0 at hb0 addr 0xe1000000 ipl 6 # news1700
83 timer0 at hb1 addr 0xe1140000 ipl 6 # news1200
84
85 # MK48T02 TOD clock
86 mkclock0 at hb0 addr 0xe0d80000 # news1700
87 mkclock0 at hb1 addr 0xe1420000 # news1200
88
89 # onboard LANCE ethernet
90 le0 at hb0 addr 0xe0f00000 ipl 4 # news1700
91 le0 at hb1 addr 0xe1a40000 ipl 4 # news1200
92
93 # keyboard/mouse; not yet
94 #kb0 at hb0 addr 0xe0d00000 ipl 5 # news1700
95 #ms0 at hb0 addr 0xe0d00005 ipl 5 # news1700
96 #kb0 at hb1 addr 0xe1240000 ipl 5 # news1200
97 #ms0 at hb1 addr 0xe1280000 ipl 5 # news1200
98
99 # onboard z8530 SCC
100 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700
101 zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200
102 zstty0 at zsc0 channel 0
103 zstty1 at zsc0 channel 1
104
105 # Frame buffer devices; not yet
106 #fb0 at hb0 addr 0xf0700000 # NWB225
107 #fb1 at hb0 addr 0xf0f00000 # NWB512
108
109 # onboard uPD72067 FDC; not yet
110 #fdc0 at hb0 addr 0xe0c80000 ipl 3
111 #fd* at fdc0
112
113 # onboard CXD1180 SCSI controller
114 #
115 # This driver has several flags which may be enabled using
116 # the "flags" directive. Valid flags are:
117 #
118 # 0x000ff Set (1<<target) to disable disconnect/reselect
119 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
120 # 0x10000 Set this bit to disable DMA interrupts (poll)
121 # 0x20000 Set this bit to disable DMA entirely (use PIO)
122 #
123 # For example: "flags 0x1000f" would disable DMA interrupts,
124 # and disable disconnect/reselect for targets 0-3
125 #
126 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
127 scsibus* at si0
128
129 sd* at scsibus? target ? lun ? # SCSI disks
130 st* at scsibus? target ? lun ? # SCSI tapes
131 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
132
133 # Misc.
134 pseudo-device loop # loopback interface; required
135 pseudo-device pty 2 # pseudo-terminals (Sysinst needs two)
136 pseudo-device md 1 # memory disk device
137 pseudo-device sl 1 # SLIP interfaces
138