INSTALL revision 1.26
1 # $NetBSD: INSTALL,v 1.26 2004/07/18 05:41:51 tsutsui Exp $ 2 3 # config for bootable floppy kernel 4 # 5 include "arch/news68k/conf/std.news68k" 6 7 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 8 9 makeoptions COPTS="-Os" # Optimise for space. Implies -O2 10 11 maxusers 4 12 13 options news1200 # news1200 support 14 options news1700 # news1[4567]00 support 15 options CPU_SINGLE # Will IOP be supported eventually? 16 #options FPU_EMULATE 17 18 options MEMORY_DISK_HOOKS 19 options MEMORY_DISK_IS_ROOT # Force root on ram-disk 20 options MEMORY_DISK_SERVER=0 # no userspace memory disk support 21 options MEMORY_DISK_ROOT_SIZE=2880 # 1.44 Megabytes 22 23 # Standard system options 24 #options KTRACE # system call tracing support 25 #options SYSVMSG # System V message queues 26 #options SYSVSEM # System V semaphores 27 #options SYSVSHM # System V shared memory 28 #options SHMMAXPGS=1024 # 1024 pages is the default 29 #options LKM # loadable kernel modules 30 options USERCONF # userconf(4) support 31 options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 32 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 33 options MALLOC_NOINLINE # Not inlining MALLOC saves memory 34 35 # Debugging options 36 #options DDB # kernel dynamic debugger 37 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 38 #options DEBUG # extra kernel debugging support 39 #options DIAGNOSTIC # extra kernel sanity checking 40 #options SCSIVERBOSE # Verbose SCSI errors 41 42 # Compatibility options 43 #options COMPAT_43 # compatibility with 4.3BSD binaries 44 #options COMPAT_13 # NetBSD 1.3 binary compatibility 45 #options COMPAT_14 # NetBSD 1.4 binary compatibility 46 #options COMPAT_15 # NetBSD 1.5 binary compatibility 47 #options COMPAT_16 # NetBSD 1.6 binary compatibility 48 #options COMPAT_20 # NetBSD 2.0 binary compatibility 49 50 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 51 52 # File systems 53 file-system FFS # Berkeley Fast Filesystem 54 file-system NFS # Sun NFS-compatible filesystem client 55 file-system MFS # memory-based filesystem 56 file-system CD9660 # ISO 9660 + Rock Ridge file system 57 file-system MSDOSFS # MS-DOS FAT file system 58 #file-system KERNFS # /kern 59 #file-system PROCFS # /proc 60 #file-system FDESC # /dev/fd/* 61 #file-system NULLFS # loopback file system 62 #file-system UNION # union file system 63 64 # Filesystem options 65 #options NFSSERVER # nfs server support 66 #options QUOTA # ffs quotas 67 #options FFS_EI # ffs endian independant support 68 options NFS_V2_ONLY # Exclude NFS3 and NQNFS code to save space 69 options VNODE_OP_NOINLINE # Not inlining vnode op calls saves mem 70 71 # Networking options 72 options INET # Internet protocols 73 #options GATEWAY # IP packet forwarding 74 #options PFIL_HOOKS # pfil(9) packet filter hooks 75 #options IPFILTER_LOG # ipmon(8) log support 76 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 77 #options NFS_BOOT_BOOTPARAM 78 79 config netbsd root on ? type ? dumps on none 80 81 # 82 # device declarations 83 # 84 85 mainbus0 at root 86 87 # NEWS HYPER-BUS 88 hb0 at mainbus0 systype NEWS1700 89 hb1 at mainbus0 systype NEWS1200 90 91 # interval timer 92 timer0 at hb0 addr 0xe1000000 ipl 6 # news1700 93 timer0 at hb1 addr 0xe1140000 ipl 6 # news1200 94 95 # MK48T02 TOD clock 96 mkclock0 at hb0 addr 0xe0d80000 # news1700 97 mkclock0 at hb1 addr 0xe1420000 # news1200 98 99 # onboard LANCE ethernet 100 le0 at hb0 addr 0xe0f00000 ipl 4 # news1700 101 le0 at hb1 addr 0xe1a40000 ipl 4 # news1200 102 103 # keyboard/mouse; not yet 104 #kb0 at hb0 addr 0xe0d00000 ipl 5 # news1700 105 #ms0 at hb0 addr 0xe0d00005 ipl 5 # news1700 106 #kb0 at hb1 addr 0xe1240000 ipl 5 # news1200 107 #ms0 at hb1 addr 0xe1280000 ipl 5 # news1200 108 109 # onboard z8530 SCC 110 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 # news1700 111 zsc0 at hb1 addr 0xe1780000 ipl 5 vect 64 flags 0x1 # news1200 112 zstty0 at zsc0 channel 0 113 zstty1 at zsc0 channel 1 114 115 # Frame buffer devices; not yet 116 #fb0 at hb0 addr 0xf0700000 # NWB225 117 #fb1 at hb0 addr 0xf0f00000 # NWB512 118 119 # onboard uPD72067 FDC; not yet 120 #fdc0 at hb0 addr 0xe0c80000 ipl 3 121 #fd* at fdc0 122 123 # onboard CXD1180 SCSI controller 124 # 125 # This driver has several flags which may be enabled using 126 # the "flags" directive. Valid flags are: 127 # 128 # 0x000ff Set (1<<target) to disable disconnect/reselect 129 # 0x0ff00 Set (1<<(target+8)) to disable parity checking 130 # 0x10000 Set this bit to disable DMA interrupts (poll) 131 # 0x20000 Set this bit to disable DMA entirely (use PIO) 132 # 133 # For example: "flags 0x1000f" would disable DMA interrupts, 134 # and disable disconnect/reselect for targets 0-3 135 # 136 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 137 scsibus* at si0 138 139 sd* at scsibus? target ? lun ? # SCSI disks 140 st* at scsibus? target ? lun ? # SCSI tapes 141 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 142 143 # Misc. 144 pseudo-device loop # loopback interface; required 145 pseudo-device pty 2 # pseudo-terminals (Sysinst needs two) 146 pseudo-device md 1 # memory disk device 147 pseudo-device sl 1 # SLIP interfaces 148 149 pseudo-device rnd # /dev/random and in-kernel generator 150
Indexes created Mon Oct 13 08:09:50 GMT 2025