xref: /src/sys/arch/news68k/conf/LIBERO

# 	$NetBSD: LIBERO,v 1.26 2005/01/05 09:01:24 tsutsui Exp $

#	NEWS1750 config file;
#
#	"The far way to the eventual news68k port"
#
include		"arch/news68k/conf/std.news68k"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

maxusers	8

options 	news1700		# news1[4567]00 support
options 	CPU_SINGLE		# Will IOP be supported eventually?
#options 	FPU_EMULATE

# Standard system options
options 	NTP			# NTP phase/frequency locked loop
options 	KTRACE			# system call tracing support
options 	SYSTRACE		# system call vetting via systrace(1)
options 	SYSVMSG			# System V message queues
options 	SYSVSEM			# System V semaphores
options 	SYSVSHM			# System V shared memory
#options 	SHMMAXPGS=1024		# 1024 pages is the default
options 	LKM			# loadable kernel modules
#options 	USERCONF		# userconf(4) support
#options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
#options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel

# Enable experimental buffer queue strategy for better responsiveness under 
# high disk I/O load. Use it with caution - it's not proven to be stable yet.
#options 	NEW_BUFQ_STRATEGY

# Debugging options
options 	DDB			# kernel dynamic debugger
#options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
#options 	DEBUG			# extra kernel debugging support
options 	DIAGNOSTIC		# extra kernel sanity checking
options 	SCSIVERBOSE		# Verbose SCSI errors
#options 	SCSIDEBUG		#

# Compatibility options
options 	COMPAT_43		# compatibility with 4.3BSD binaries
options 	COMPAT_13		# NetBSD 1.3 binary compatibility
options 	COMPAT_14		# NetBSD 1.4 binary compatibility
options 	COMPAT_16		# NetBSD 1.6 binary compatibility
options 	COMPAT_20		# NetBSD 2.0 binary compatibility
options 	COMPAT_AOUT_M68K	# compatibility with NetBSD/m68k a.out

#options 	COMPAT_SVR4		# binary compatibility with SVR4
options 	COMPAT_SUNOS		# binary compatibility with SunOS
#options 	COMPAT_LINUX		# binary compatibllity with Linux/m68k
options 	COMPAT_BSDPTY		# /dev/[pt]ty?? ptys.

#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

# Filesystem options
file-system	FFS		# Berkeley Fast Filesystem
file-system	NFS		# Sun NFS-compatible filesystem client
file-system	MFS		# memory-based filesystem
file-system	CD9660		# ISO 9660 + Rock Ridge file system
file-system	MSDOSFS		# MS-DOS FAT file system
file-system	KERNFS		# /kern
file-system	PROCFS		# /proc
file-system	FDESC		# /dev/fd/*
file-system	NULLFS		# loopback file system
#file-system	UNION		# union file system

options 	NFSSERVER	# nfs server support
#options 	QUOTA		# ffs quotas
#options 	FFS_EI		# ffs endian independant support
options 	SOFTDEP		# ffs soft updates support

# Networking options
options 	INET		# Internet protocols
options 	INET6		# IPv6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	GATEWAY		# IP packet forwarding
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	IPFILTER_LOG	# ipmon(8) log support
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
options 	NFS_BOOT_BOOTPARAM

config	netbsd root on ? type ?
#config	netbsd root on ? type nfs

#
# device declarations
#

mainbus0 at root

# NEWS HYPER-BUS
hb0	at mainbus0 systype NEWS1700

# interval timer
timer0	at hb0 addr 0xe1000000 ipl 6

# MK48T02 TOD clock
mkclock0 at hb0 addr 0xe0d80000

# onboard LANCE ethernet
le0	at hb0 addr 0xe0f00000 ipl 4

# keyboard/mouse
kbc0	at hb0 addr 0xe0d00000 ipl 5
kb0	at kbc0
ms0	at kbc0

wskbd*	at kb?
wsmouse* at ms?

# onboard z8530 SCC
zsc0	at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0
zstty0	at zsc0 channel 0
zstty1	at zsc0 channel 1

# Frame buffer devices; not yet
#fb0	at hb0 addr 0xf0700000			# NWB225
#fb1	at hb0 addr 0xf0f00000			# NWB512

# onboard uPD72067 FDC; not yet
#fdc0	at hb0 addr 0xe0c80000 ipl 3
#fd*	at fdc0

# onboard CXD1180 SCSI controller
#
# This driver has several flags which may be enabled using
# the "flags" directive.  Valid flags are:
#
# 0x000ff	Set (1<<target) to disable disconnect/reselect
# 0x0ff00	Set (1<<(target+8)) to disable parity checking
# 0x10000	Set this bit to disable DMA interrupts (poll)
# 0x20000	Set this bit to disable DMA entirely (use PIO)
#
# For example: "flags 0x1000f" would disable DMA interrupts,
# and disable disconnect/reselect for targets 0-3
#
si0	at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
scsibus* at si0

sd*	at scsibus? target ? lun ?		# SCSI disks
st*	at scsibus? target ? lun ?		# SCSI tapes
cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
#ch*	at scsibus? target ? lun ?		# SCSI changer devices
#ss*	at scsibus? target ? lun ?		# SCSI scanners
#uk*	at scsibus? target ? lun ?		# unknown SCSI devices

# Misc.
pseudo-device	loop			# loopback interface; required
pseudo-device	pty			# pseudo-terminals
pseudo-device	md		1	# memory disk device
pseudo-device	vnd		4	# disk-like interface to files
#pseudo-device	ccd		4	# concatenated and striped disks
#pseudo-device	raid		4	# RAIDframe disk driver
#pseudo-device	sl		2	# SLIP interfaces
#pseudo-device	ppp		2	# PPP interfaces
#pseudo-device	tun		4	# Network "tunnel" device
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	bpfilter	8	# Berkeley Packet Filter
#pseudo-device	ipfilter		# ip filter
#pseudo-device	strip		1	# Starmode Radio IP (Metricom)
pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
pseudo-device	rnd			# /dev/random and in-kernle generator
pseudo-device	clockctl		# user control of clock subsystem
pseudo-device	wsmux
pseudo-device	ksyms