LIBERO revision 1.17 1 # $NetBSD: LIBERO,v 1.17 2002/04/25 15:06:33 atatat Exp $
2
3 # NEWS1750 config file;
4 #
5 # "The far way to the eventual news68k port"
6 #
7 include "arch/news68k/conf/std.news68k"
8
9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
10
11 maxusers 8
12
13 options news1700 # news1[4567]00 support
14 options CPU_SINGLE # Will IOP be supported eventually?
15 #options FPU_EMULATE
16
17 # Standard system options
18 options NTP # NTP phase/frequency locked loop
19 options KTRACE # system call tracing support
20 options SYSVMSG # System V message queues
21 options SYSVSEM # System V semaphores
22 options SYSVSHM # System V shared memory
23 #options SHMMAXPGS=1024 # 1024 pages is the default
24 options LKM # loadable kernel modules
25 #options UCONSOLE # users can redirect console (unsafe)
26 #options USERCONF # userconf(4) support
27 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
28
29 # Debugging options
30 options DDB # kernel dynamic debugger
31 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
32 #options DEBUG # extra kernel debugging support
33 options DIAGNOSTIC # extra kernel sanity checking
34 options SCSIVERBOSE # Verbose SCSI errors
35 #options SCSIDEBUG #
36
37 # Compatibility options
38 options COMPAT_43 # compatibility with 4.3BSD binaries
39 options COMPAT_13 # NetBSD 1.3 binary compatibility
40 options COMPAT_14 # NetBSD 1.4 binary compatibility
41 options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
42
43 #options COMPAT_SVR4 # binary compatibility with SVR4
44 options COMPAT_SUNOS # binary compatibility with SunOS
45 #options COMPAT_LINUX # binary compatibllity with Linux/m68k
46
47 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
48
49 # Filesystem options
50 file-system FFS # Berkeley Fast Filesystem
51 file-system NFS # Sun NFS-compatible filesystem client
52 file-system MFS # memory-based filesystem
53 file-system CD9660 # ISO 9660 + Rock Ridge file system
54 file-system MSDOSFS # MS-DOS FAT file system
55 file-system KERNFS # /kern
56 file-system PROCFS # /proc
57 file-system FDESC # /dev/fd/*
58 #file-system NULLFS # loopback file system
59 #file-system UNION # union file system
60
61 options NFSSERVER # nfs server support
62 #options QUOTA # ffs quotas
63 #options FFS_EI # ffs endian independant support
64 options SOFTDEP # ffs soft updates support
65
66 # Networking options
67 options INET # Internet protocols
68 options INET6 # IPv6
69 #options IPSEC # IP security
70 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
71 #options IPSEC_DEBUG # debug for IP security
72 #options GATEWAY # IP packet forwarding
73 #options PFIL_HOOKS # pfil(9) packet filter hooks
74 #options IPFILTER_LOG # ipmon(8) log support
75 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
76 options NFS_BOOT_BOOTPARAM
77
78 config netbsd root on ? type ?
79 #config netbsd root on ? type nfs
80
81 #
82 # device declarations
83 #
84
85 mainbus0 at root
86
87 # NEWS HYPER-BUS
88 hb0 at mainbus0 systype NEWS1700
89
90 # interval timer
91 timer0 at hb0 addr 0xe1000000 ipl 6
92
93 # MK48T02 TOD clock
94 mkclock0 at hb0 addr 0xe0d80000
95
96 # onboard LANCE ethernet
97 le0 at hb0 addr 0xe0f00000 ipl 4
98
99 # keyboard/mouse
100 kbc0 at hb0 addr 0xe0d00000 ipl 5
101 kb0 at kbc0
102 ms0 at kbc0
103
104 wskbd* at kb?
105 wsmouse* at ms?
106
107 # onboard z8530 SCC
108 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0
109 zstty0 at zsc0 channel 0
110 zstty1 at zsc0 channel 1
111
112 # Frame buffer devices; not yet
113 #fb0 at hb0 addr 0xf0700000 # NWB225
114 #fb1 at hb0 addr 0xf0f00000 # NWB512
115
116 # onboard uPD72067 FDC; not yet
117 #fdc0 at hb0 addr 0xe0c80000 ipl 3
118 #fd* at fdc0
119
120 # onboard CXD1180 SCSI controller
121 #
122 # This driver has several flags which may be enabled using
123 # the "flags" directive. Valid flags are:
124 #
125 # 0x000ff Set (1<<target) to disable disconnect/reselect
126 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
127 # 0x10000 Set this bit to disable DMA interrupts (poll)
128 # 0x20000 Set this bit to disable DMA entirely (use PIO)
129 #
130 # For example: "flags 0x1000f" would disable DMA interrupts,
131 # and disable disconnect/reselect for targets 0-3
132 #
133 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf
134 scsibus* at si0
135
136 sd* at scsibus? target ? lun ? # SCSI disks
137 st* at scsibus? target ? lun ? # SCSI tapes
138 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
139 #ch* at scsibus? target ? lun ? # SCSI changer devices
140 #ss* at scsibus? target ? lun ? # SCSI scanners
141 #uk* at scsibus? target ? lun ? # unknown SCSI devices
142
143 # Misc.
144 pseudo-device loop # loopback interface; required
145 pseudo-device pty # pseudo-terminals
146 pseudo-device md 1 # memory disk device
147 pseudo-device vnd 4 # disk-like interface to files
148 #pseudo-device ccd 4 # concatenated and striped disks
149 #pseudo-device raid 4 # RAIDframe disk driver
150 #pseudo-device sl 2 # SLIP interfaces
151 pseudo-device ppp 2 # PPP interfaces
152 #pseudo-device tun 4 # Network "tunnel" device
153 #pseudo-device gre 2 # generic L3 over IP tunnel
154 pseudo-device bpfilter 16 # Berkeley Packet Filter
155 pseudo-device ipfilter # ip filter
156 #pseudo-device strip 1 # Starmode Radio IP (Metricom)
157 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
158 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f
159 pseudo-device rnd # /dev/random and in-kernle generator
160