LIBERO revision 1.30
1# $NetBSD: LIBERO,v 1.30 2005/06/09 14:43:30 tsutsui Exp $ 2 3# NEWS1750 config file; 4# 5# "The far way to the eventual news68k port" 6# 7include "arch/news68k/conf/std.news68k" 8 9#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11maxusers 8 12 13options news1700 # news1[4567]00 support 14options CPU_SINGLE # Will IOP be supported eventually? 15#options FPU_EMULATE 16 17# Standard system options 18options NTP # NTP phase/frequency locked loop 19options KTRACE # system call tracing support 20options SYSTRACE # system call vetting via systrace(1) 21options SYSVMSG # System V message queues 22options SYSVSEM # System V semaphores 23options SYSVSHM # System V shared memory 24#options SHMMAXPGS=1024 # 1024 pages is the default 25options LKM # loadable kernel modules 26#options USERCONF # userconf(4) support 27#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 28#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 29 30# Enable experimental buffer queue strategy for better responsiveness under 31# high disk I/O load. Use it with caution - it's not proven to be stable yet. 32#options BUFQ_READPRIO 33#options BUFQ_PRIOCSCAN 34 35# Debugging options 36options DDB # kernel dynamic debugger 37#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 38#options DEBUG # extra kernel debugging support 39options DIAGNOSTIC # extra kernel sanity checking 40options SCSIVERBOSE # Verbose SCSI errors 41#options SCSIDEBUG # 42 43# Compatibility options 44options COMPAT_43 # compatibility with 4.3BSD binaries 45options COMPAT_13 # NetBSD 1.3 binary compatibility 46options COMPAT_14 # NetBSD 1.4 binary compatibility 47options COMPAT_16 # NetBSD 1.6 binary compatibility 48options COMPAT_20 # NetBSD 2.0 binary compatibility 49options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out 50 51#options COMPAT_SVR4 # binary compatibility with SVR4 52options COMPAT_SUNOS # binary compatibility with SunOS 53#options COMPAT_LINUX # binary compatibllity with Linux/m68k 54options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 55 56#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 57 58# Filesystem options 59file-system FFS # Berkeley Fast Filesystem 60file-system NFS # Sun NFS-compatible filesystem client 61file-system MFS # memory-based filesystem 62file-system CD9660 # ISO 9660 + Rock Ridge file system 63file-system MSDOSFS # MS-DOS FAT file system 64file-system KERNFS # /kern 65file-system PROCFS # /proc 66file-system FDESC # /dev/fd/* 67file-system NULLFS # loopback file system 68#file-system UNION # union file system 69 70options NFSSERVER # nfs server support 71#options QUOTA # ffs quotas 72#options FFS_EI # ffs endian independant support 73options SOFTDEP # ffs soft updates support 74options FFS_NO_SNAPSHOT # ffs snapshots 75 76# Networking options 77options INET # Internet protocols 78options INET6 # IPv6 79#options IPSEC # IP security 80#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 81#options IPSEC_DEBUG # debug for IP security 82#options GATEWAY # IP packet forwarding 83#options PFIL_HOOKS # pfil(9) packet filter hooks 84#options IPFILTER_LOG # ipmon(8) log support 85#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 86options NFS_BOOT_BOOTPARAM 87 88config netbsd root on ? type ? 89#config netbsd root on ? type nfs 90 91# 92# device declarations 93# 94 95mainbus0 at root 96 97# NEWS HYPER-BUS 98hb0 at mainbus0 systype NEWS1700 99 100# interval timer 101timer0 at hb0 addr 0xe1000000 ipl 6 102 103# MK48T02 TOD clock 104mkclock0 at hb0 addr 0xe0d80000 105 106# onboard LANCE ethernet 107le0 at hb0 addr 0xe0f00000 ipl 4 108 109# keyboard/mouse 110kbc0 at hb0 addr 0xe0d00000 ipl 5 111kb0 at kbc0 112ms0 at kbc0 113 114wskbd* at kb? 115wsmouse* at ms? 116 117# onboard z8530 SCC 118zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0 119zstty0 at zsc0 channel 0 120zstty1 at zsc0 channel 1 121 122# Frame buffer devices; not yet 123#fb0 at hb0 addr 0xf0700000 # NWB225 124#fb1 at hb0 addr 0xf0f00000 # NWB512 125 126# onboard uPD72067 FDC; not yet 127#fdc0 at hb0 addr 0xe0c80000 ipl 3 128#fd* at fdc0 129 130# onboard CXD1180 SCSI controller 131# 132# This driver has several flags which may be enabled using 133# the "flags" directive. Valid flags are: 134# 135# 0x000ff Set (1<<target) to disable disconnect/reselect 136# 0x0ff00 Set (1<<(target+8)) to disable parity checking 137# 0x10000 Set this bit to disable DMA interrupts (poll) 138# 0x20000 Set this bit to disable DMA entirely (use PIO) 139# 140# For example: "flags 0x1000f" would disable DMA interrupts, 141# and disable disconnect/reselect for targets 0-3 142# 143si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0xf 144scsibus* at si0 145 146sd* at scsibus? target ? lun ? # SCSI disks 147st* at scsibus? target ? lun ? # SCSI tapes 148cd* at scsibus? target ? lun ? # SCSI CD-ROMs 149#ch* at scsibus? target ? lun ? # SCSI changer devices 150#ss* at scsibus? target ? lun ? # SCSI scanners 151#uk* at scsibus? target ? lun ? # unknown SCSI devices 152 153# Misc. 154pseudo-device loop # loopback interface; required 155pseudo-device pty # pseudo-terminals 156pseudo-device md 1 # memory disk device 157pseudo-device vnd 4 # disk-like interface to files 158#pseudo-device ccd 4 # concatenated and striped disks 159#pseudo-device raid 4 # RAIDframe disk driver 160#pseudo-device fss 4 # file system snapshot device 161#pseudo-device sl 2 # SLIP interfaces 162#pseudo-device ppp 2 # PPP interfaces 163#pseudo-device tun 4 # Network "tunnel" device 164#pseudo-device gre 2 # generic L3 over IP tunnel 165pseudo-device bpfilter 8 # Berkeley Packet Filter 166#pseudo-device ipfilter # ip filter 167#pseudo-device strip 1 # Starmode Radio IP (Metricom) 168pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 169#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 170pseudo-device rnd # /dev/random and in-kernle generator 171pseudo-device clockctl # user control of clock subsystem 172pseudo-device wsmux 173pseudo-device ksyms 174