LIBERO revision 1.71 1 # $NetBSD: LIBERO,v 1.71 2025/11/29 23:48:06 tsutsui Exp $
2
3 # NEWS1750 config file;
4 #
5 # "The far way to the eventual news68k port"
6 #
7 include "arch/news68k/conf/std.news68k"
8
9 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary
10
11 makeoptions COPTS="-O2 -fno-reorder-blocks -fno-unwind-tables -fno-omit-frame-pointer"
12 # See share/mk/sys.mk. -fno-omit-frame-pointer is necessary for
13 # backtraces in DDB.
14
15 maxusers 8
16
17 options news1700 # news1[4567]00 support
18 options CPU_SINGLE # Will IOP be supported eventually?
19 #options FPU_EMULATE
20
21 # Standard system options
22 options NTP # NTP phase/frequency locked loop
23 options KTRACE # system call tracing support
24 options SYSVMSG # System V message queues
25 options SYSVSEM # System V semaphores
26 options SYSVSHM # System V shared memory
27 #options USERCONF # userconf(4) support
28 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
29 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
30
31 # Alternate buffer queue strategies for better responsiveness under high
32 # disk I/O load.
33 #options BUFQ_READPRIO
34 #options BUFQ_PRIOCSCAN
35
36 # Debugging options
37 options DDB # kernel dynamic debugger
38 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
39 #options DEBUG # extra kernel debugging support
40 options DIAGNOSTIC # extra kernel sanity checking
41 options SCSIVERBOSE # Verbose SCSI errors
42 #options SCSIDEBUG #
43
44 # Compatibility options
45 include "conf/compat_netbsd13.config"
46 options COMPAT_AOUT_M68K # compatibility with NetBSD/m68k a.out
47
48 options COMPAT_SUNOS # binary compatibility with SunOS
49 #options COMPAT_LINUX # binary compatibllity with Linux/m68k
50 #options COMPAT_OSSAUDIO # binary compatibllity with Linux/m68k
51
52 # Filesystem options
53 file-system FFS # Berkeley Fast Filesystem
54 file-system NFS # Sun NFS-compatible filesystem client
55 file-system MFS # memory-based filesystem
56 file-system CD9660 # ISO 9660 + Rock Ridge file system
57 file-system MSDOSFS # MS-DOS FAT file system
58 file-system KERNFS # /kern
59 file-system PROCFS # /proc
60 file-system FDESC # /dev/fd/*
61 file-system NULLFS # loopback file system
62 #file-system UNION # union file system
63 file-system PTYFS # /dev/pts/N support
64
65 options NFSSERVER # nfs server support
66 #options QUOTA # legacy UFS quotas
67 #options QUOTA2 # new, in-filesystem UFS quotas
68 #options FFS_EI # ffs endian independent support
69 options FFS_NO_SNAPSHOT # FFS snapshot support
70
71 # Networking options
72 options INET # Internet protocols
73 options INET6 # IPv6
74 #options IPSEC # IP security
75 #options IPSEC_DEBUG # debug for IP security
76 #options GATEWAY # IP packet forwarding
77 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
78 options NFS_BOOT_BOOTPARAM
79
80 config netbsd root on ? type ?
81 #config netbsd root on ? type nfs
82
83 #
84 # device declarations
85 #
86
87 mainbus0 at root
88
89 # NEWS HYPER-BUS
90 hb0 at mainbus0 systype NEWS1700
91
92 # interval timer
93 timer0 at hb0 addr 0xe1000000 ipl 6
94
95 # MK48T02 TOD clock
96 mkclock0 at hb0 addr 0xe0d80000
97
98 # onboard LANCE ethernet
99 le0 at hb0 addr 0xe0f00000 ipl 4
100
101 # keyboard/mouse
102 kbc0 at hb0 addr 0xe0d00000 ipl 5
103 kb0 at kbc0
104 ms0 at kbc0
105
106 wskbd* at kb?
107 wsmouse* at ms?
108
109 # onboard z8530 SCC
110 zsc0 at hb0 addr 0xe0d40000 ipl 5 vect 64 flags 0x0
111 zstty0 at zsc0 channel 0
112 zstty1 at zsc0 channel 1
113
114 # Frame buffer devices; not yet
115 #fb0 at hb0 addr 0xf0700000 # NWB225
116 #fb1 at hb0 addr 0xf0f00000 # NWB512
117
118 # onboard uPD72067 FDC; not yet
119 #fdc0 at hb0 addr 0xe0c80000 ipl 3
120 #fd* at fdc0
121
122 # onboard CXD1180 SCSI controller
123 #
124 # This driver has several flags which may be enabled using
125 # the "flags" directive. Valid flags are:
126 #
127 # 0x000ff Set (1<<target) to disable disconnect/reselect
128 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
129 # 0x10000 Set this bit to disable DMA interrupts (poll)
130 # 0x20000 Set this bit to disable DMA entirely (use PIO)
131 #
132 # For example: "flags 0x1000f" would disable DMA interrupts,
133 # and disable disconnect/reselect for targets 0-3
134 #
135 si0 at hb0 addr 0xe0cc0000 ipl 4 flags 0x0
136 scsibus* at si0
137
138 sd* at scsibus? target ? lun ? # SCSI disks
139 st* at scsibus? target ? lun ? # SCSI tapes
140 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
141 #ch* at scsibus? target ? lun ? # SCSI changer devices
142 #ss* at scsibus? target ? lun ? # SCSI scanners
143 #uk* at scsibus? target ? lun ? # unknown SCSI devices
144
145 # Misc.
146 pseudo-device loop # loopback interface; required
147 pseudo-device pty # pseudo-terminals
148 pseudo-device md # memory disk device
149 pseudo-device vnd # disk-like interface to files
150 #pseudo-device ccd # concatenated and striped disks
151 #pseudo-device raid # RAIDframe disk driver
152 #pseudo-device fss # file system snapshot device
153 #pseudo-device sl # SLIP interfaces
154 #pseudo-device ppp # PPP interfaces
155 #pseudo-device tun # Network "tunnel" device
156 #pseudo-device gre # generic L3 over IP tunnel
157 pseudo-device bpfilter # Berkeley Packet Filter
158 #pseudo-device npf # NPF packet filter
159 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
160 #pseudo-device faith # IPv[46] tcp relay translation i/f
161 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
162 pseudo-device clockctl # user control of clock subsystem
163 pseudo-device wsmux
164 pseudo-device ksyms
165