if_emac.c revision 1.24 1 /* $NetBSD: if_emac.c,v 1.24 2006/02/18 05:04:11 thorpej Exp $ */
2
3 /*
4 * Copyright 2001, 2002 Wasabi Systems, Inc.
5 * All rights reserved.
6 *
7 * Written by Simon Burge and Jason Thorpe for Wasabi Systems, Inc.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed for the NetBSD Project by
20 * Wasabi Systems, Inc.
21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22 * or promote products derived from this software without specific prior
23 * written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
36 */
37
38 #include <sys/cdefs.h>
39 __KERNEL_RCSID(0, "$NetBSD: if_emac.c,v 1.24 2006/02/18 05:04:11 thorpej Exp $");
40
41 #include "bpfilter.h"
42
43 #include <sys/param.h>
44 #include <sys/systm.h>
45 #include <sys/mbuf.h>
46 #include <sys/kernel.h>
47 #include <sys/socket.h>
48 #include <sys/ioctl.h>
49
50 #include <uvm/uvm_extern.h> /* for PAGE_SIZE */
51
52 #include <net/if.h>
53 #include <net/if_dl.h>
54 #include <net/if_media.h>
55 #include <net/if_ether.h>
56
57 #if NBPFILTER > 0
58 #include <net/bpf.h>
59 #endif
60
61 #include <powerpc/ibm4xx/dev/opbvar.h>
62
63 #include <powerpc/ibm4xx/ibm405gp.h>
64 #include <powerpc/ibm4xx/mal405gp.h>
65 #include <powerpc/ibm4xx/dcr405gp.h>
66 #include <powerpc/ibm4xx/dev/emacreg.h>
67 #include <powerpc/ibm4xx/dev/if_emacreg.h>
68
69 #include <dev/mii/miivar.h>
70
71 /*
72 * Transmit descriptor list size. There are two Tx channels, each with
73 * up to 256 hardware descriptors available. We currently use one Tx
74 * channel. We tell the upper layers that they can queue a lot of
75 * packets, and we go ahead and manage up to 64 of them at a time. We
76 * allow up to 16 DMA segments per packet.
77 */
78 #define EMAC_NTXSEGS 16
79 #define EMAC_TXQUEUELEN 64
80 #define EMAC_TXQUEUELEN_MASK (EMAC_TXQUEUELEN - 1)
81 #define EMAC_TXQUEUE_GC (EMAC_TXQUEUELEN / 4)
82 #define EMAC_NTXDESC 256
83 #define EMAC_NTXDESC_MASK (EMAC_NTXDESC - 1)
84 #define EMAC_NEXTTX(x) (((x) + 1) & EMAC_NTXDESC_MASK)
85 #define EMAC_NEXTTXS(x) (((x) + 1) & EMAC_TXQUEUELEN_MASK)
86
87 /*
88 * Receive descriptor list size. There is one Rx channel with up to 256
89 * hardware descriptors available. We allocate 64 receive descriptors,
90 * each with a 2k buffer (MCLBYTES).
91 */
92 #define EMAC_NRXDESC 64
93 #define EMAC_NRXDESC_MASK (EMAC_NRXDESC - 1)
94 #define EMAC_NEXTRX(x) (((x) + 1) & EMAC_NRXDESC_MASK)
95 #define EMAC_PREVRX(x) (((x) - 1) & EMAC_NRXDESC_MASK)
96
97 /*
98 * Transmit/receive descriptors that are DMA'd to the EMAC.
99 */
100 struct emac_control_data {
101 struct mal_descriptor ecd_txdesc[EMAC_NTXDESC];
102 struct mal_descriptor ecd_rxdesc[EMAC_NRXDESC];
103 };
104
105 #define EMAC_CDOFF(x) offsetof(struct emac_control_data, x)
106 #define EMAC_CDTXOFF(x) EMAC_CDOFF(ecd_txdesc[(x)])
107 #define EMAC_CDRXOFF(x) EMAC_CDOFF(ecd_rxdesc[(x)])
108
109 /*
110 * Software state for transmit jobs.
111 */
112 struct emac_txsoft {
113 struct mbuf *txs_mbuf; /* head of mbuf chain */
114 bus_dmamap_t txs_dmamap; /* our DMA map */
115 int txs_firstdesc; /* first descriptor in packet */
116 int txs_lastdesc; /* last descriptor in packet */
117 int txs_ndesc; /* # of descriptors used */
118 };
119
120 /*
121 * Software state for receive descriptors.
122 */
123 struct emac_rxsoft {
124 struct mbuf *rxs_mbuf; /* head of mbuf chain */
125 bus_dmamap_t rxs_dmamap; /* our DMA map */
126 };
127
128 /*
129 * Software state per device.
130 */
131 struct emac_softc {
132 struct device sc_dev; /* generic device information */
133 bus_space_tag_t sc_st; /* bus space tag */
134 bus_space_handle_t sc_sh; /* bus space handle */
135 bus_dma_tag_t sc_dmat; /* bus DMA tag */
136 struct ethercom sc_ethercom; /* ethernet common data */
137 void *sc_sdhook; /* shutdown hook */
138 void *sc_powerhook; /* power management hook */
139
140 struct mii_data sc_mii; /* MII/media information */
141 struct callout sc_callout; /* tick callout */
142
143 u_int32_t sc_mr1; /* copy of Mode Register 1 */
144
145 bus_dmamap_t sc_cddmamap; /* control data dma map */
146 #define sc_cddma sc_cddmamap->dm_segs[0].ds_addr
147
148 /* Software state for transmit/receive descriptors. */
149 struct emac_txsoft sc_txsoft[EMAC_TXQUEUELEN];
150 struct emac_rxsoft sc_rxsoft[EMAC_NRXDESC];
151
152 /* Control data structures. */
153 struct emac_control_data *sc_control_data;
154 #define sc_txdescs sc_control_data->ecd_txdesc
155 #define sc_rxdescs sc_control_data->ecd_rxdesc
156
157 #ifdef EMAC_EVENT_COUNTERS
158 struct evcnt sc_ev_rxintr; /* Rx interrupts */
159 struct evcnt sc_ev_txintr; /* Tx interrupts */
160 struct evcnt sc_ev_rxde; /* Rx descriptor interrupts */
161 struct evcnt sc_ev_txde; /* Tx descriptor interrupts */
162 struct evcnt sc_ev_wol; /* Wake-On-Lan interrupts */
163 struct evcnt sc_ev_serr; /* MAL system error interrupts */
164 struct evcnt sc_ev_intr; /* General EMAC interrupts */
165
166 struct evcnt sc_ev_txreap; /* Calls to Tx descriptor reaper */
167 struct evcnt sc_ev_txsstall; /* Tx stalled due to no txs */
168 struct evcnt sc_ev_txdstall; /* Tx stalled due to no txd */
169 struct evcnt sc_ev_txdrop; /* Tx packets dropped (too many segs) */
170 struct evcnt sc_ev_tu; /* Tx underrun */
171 #endif /* EMAC_EVENT_COUNTERS */
172
173 int sc_txfree; /* number of free Tx descriptors */
174 int sc_txnext; /* next ready Tx descriptor */
175
176 int sc_txsfree; /* number of free Tx jobs */
177 int sc_txsnext; /* next ready Tx job */
178 int sc_txsdirty; /* dirty Tx jobs */
179
180 int sc_rxptr; /* next ready RX descriptor/descsoft */
181 };
182
183 #ifdef EMAC_EVENT_COUNTERS
184 #define EMAC_EVCNT_INCR(ev) (ev)->ev_count++
185 #else
186 #define EMAC_EVCNT_INCR(ev) /* nothing */
187 #endif
188
189 #define EMAC_CDTXADDR(sc, x) ((sc)->sc_cddma + EMAC_CDTXOFF((x)))
190 #define EMAC_CDRXADDR(sc, x) ((sc)->sc_cddma + EMAC_CDRXOFF((x)))
191
192 #define EMAC_CDTXSYNC(sc, x, n, ops) \
193 do { \
194 int __x, __n; \
195 \
196 __x = (x); \
197 __n = (n); \
198 \
199 /* If it will wrap around, sync to the end of the ring. */ \
200 if ((__x + __n) > EMAC_NTXDESC) { \
201 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
202 EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) * \
203 (EMAC_NTXDESC - __x), (ops)); \
204 __n -= (EMAC_NTXDESC - __x); \
205 __x = 0; \
206 } \
207 \
208 /* Now sync whatever is left. */ \
209 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
210 EMAC_CDTXOFF(__x), sizeof(struct mal_descriptor) * __n, (ops)); \
211 } while (/*CONSTCOND*/0)
212
213 #define EMAC_CDRXSYNC(sc, x, ops) \
214 do { \
215 bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cddmamap, \
216 EMAC_CDRXOFF((x)), sizeof(struct mal_descriptor), (ops)); \
217 } while (/*CONSTCOND*/0)
218
219 #define EMAC_INIT_RXDESC(sc, x) \
220 do { \
221 struct emac_rxsoft *__rxs = &(sc)->sc_rxsoft[(x)]; \
222 struct mal_descriptor *__rxd = &(sc)->sc_rxdescs[(x)]; \
223 struct mbuf *__m = __rxs->rxs_mbuf; \
224 \
225 /* \
226 * Note: We scoot the packet forward 2 bytes in the buffer \
227 * so that the payload after the Ethernet header is aligned \
228 * to a 4-byte boundary. \
229 */ \
230 __m->m_data = __m->m_ext.ext_buf + 2; \
231 \
232 __rxd->md_data = __rxs->rxs_dmamap->dm_segs[0].ds_addr + 2; \
233 __rxd->md_data_len = __m->m_ext.ext_size - 2; \
234 __rxd->md_stat_ctrl = MAL_RX_EMPTY | MAL_RX_INTERRUPT | \
235 /* Set wrap on last descriptor. */ \
236 (((x) == EMAC_NRXDESC - 1) ? MAL_RX_WRAP : 0); \
237 EMAC_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE); \
238 } while (/*CONSTCOND*/0)
239
240 #define EMAC_WRITE(sc, reg, val) \
241 bus_space_write_stream_4((sc)->sc_st, (sc)->sc_sh, (reg), (val))
242 #define EMAC_READ(sc, reg) \
243 bus_space_read_stream_4((sc)->sc_st, (sc)->sc_sh, (reg))
244
245 #define EMAC_SET_FILTER(aht, category) \
246 do { \
247 (aht)[3 - ((category) >> 4)] |= 1 << ((category) & 0xf); \
248 } while (/*CONSTCOND*/0)
249
250 static int emac_match(struct device *, struct cfdata *, void *);
251 static void emac_attach(struct device *, struct device *, void *);
252
253 static int emac_add_rxbuf(struct emac_softc *, int);
254 static int emac_init(struct ifnet *);
255 static int emac_ioctl(struct ifnet *, u_long, caddr_t);
256 static void emac_reset(struct emac_softc *);
257 static void emac_rxdrain(struct emac_softc *);
258 static int emac_txreap(struct emac_softc *);
259 static void emac_shutdown(void *);
260 static void emac_start(struct ifnet *);
261 static void emac_stop(struct ifnet *, int);
262 static void emac_watchdog(struct ifnet *);
263 static int emac_set_filter(struct emac_softc *);
264
265 static int emac_wol_intr(void *);
266 static int emac_serr_intr(void *);
267 static int emac_txeob_intr(void *);
268 static int emac_rxeob_intr(void *);
269 static int emac_txde_intr(void *);
270 static int emac_rxde_intr(void *);
271 static int emac_intr(void *);
272
273 static int emac_mediachange(struct ifnet *);
274 static void emac_mediastatus(struct ifnet *, struct ifmediareq *);
275 static int emac_mii_readreg(struct device *, int, int);
276 static void emac_mii_statchg(struct device *);
277 static void emac_mii_tick(void *);
278 static uint32_t emac_mii_wait(struct emac_softc *);
279 static void emac_mii_writereg(struct device *, int, int, int);
280
281 int emac_copy_small = 0;
282
283 CFATTACH_DECL(emac, sizeof(struct emac_softc),
284 emac_match, emac_attach, NULL, NULL);
285
286 static int
287 emac_match(struct device *parent, struct cfdata *cf, void *aux)
288 {
289 struct opb_attach_args *oaa = aux;
290
291 /* match only on-chip ethernet devices */
292 if (strcmp(oaa->opb_name, cf->cf_name) == 0)
293 return (1);
294
295 return (0);
296 }
297
298 static void
299 emac_attach(struct device *parent, struct device *self, void *aux)
300 {
301 struct opb_attach_args *oaa = aux;
302 struct emac_softc *sc = (struct emac_softc *)self;
303 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
304 struct mii_data *mii = &sc->sc_mii;
305 bus_dma_segment_t seg;
306 int error, i, nseg;
307 uint8_t enaddr[ETHER_ADDR_LEN];
308
309 sc->sc_st = oaa->opb_bt;
310 sc->sc_sh = oaa->opb_addr;
311 sc->sc_dmat = oaa->opb_dmat;
312
313 printf(": 405GP EMAC\n");
314
315 /*
316 * Set up Mode Register 1 - set receive and transmit FIFOs to maximum
317 * size, allow transmit of multiple packets (only channel 0 is used).
318 *
319 * XXX: Allow pause packets??
320 */
321 sc->sc_mr1 = MR1_RFS_4KB | MR1_TFS_2KB | MR1_TR0_MULTIPLE;
322
323 intr_establish(oaa->opb_irq , IST_LEVEL, IPL_NET, emac_wol_intr, sc);
324 intr_establish(oaa->opb_irq + 1, IST_LEVEL, IPL_NET, emac_serr_intr, sc);
325 intr_establish(oaa->opb_irq + 2, IST_LEVEL, IPL_NET, emac_txeob_intr, sc);
326 intr_establish(oaa->opb_irq + 3, IST_LEVEL, IPL_NET, emac_rxeob_intr, sc);
327 intr_establish(oaa->opb_irq + 4, IST_LEVEL, IPL_NET, emac_txde_intr, sc);
328 intr_establish(oaa->opb_irq + 5, IST_LEVEL, IPL_NET, emac_rxde_intr, sc);
329 intr_establish(oaa->opb_irq + 6, IST_LEVEL, IPL_NET, emac_intr, sc);
330 printf("%s: interrupting at irqs %d .. %d\n", sc->sc_dev.dv_xname,
331 oaa->opb_irq, oaa->opb_irq + 6);
332
333 /*
334 * Allocate the control data structures, and create and load the
335 * DMA map for it.
336 */
337 if ((error = bus_dmamem_alloc(sc->sc_dmat,
338 sizeof(struct emac_control_data), 0, 0, &seg, 1, &nseg, 0)) != 0) {
339 printf("%s: unable to allocate control data, error = %d\n",
340 sc->sc_dev.dv_xname, error);
341 goto fail_0;
342 }
343
344 if ((error = bus_dmamem_map(sc->sc_dmat, &seg, nseg,
345 sizeof(struct emac_control_data), (caddr_t *)&sc->sc_control_data,
346 BUS_DMA_COHERENT)) != 0) {
347 printf("%s: unable to map control data, error = %d\n",
348 sc->sc_dev.dv_xname, error);
349 goto fail_1;
350 }
351
352 if ((error = bus_dmamap_create(sc->sc_dmat,
353 sizeof(struct emac_control_data), 1,
354 sizeof(struct emac_control_data), 0, 0, &sc->sc_cddmamap)) != 0) {
355 printf("%s: unable to create control data DMA map, "
356 "error = %d\n", sc->sc_dev.dv_xname, error);
357 goto fail_2;
358 }
359
360 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap,
361 sc->sc_control_data, sizeof(struct emac_control_data), NULL,
362 0)) != 0) {
363 printf("%s: unable to load control data DMA map, error = %d\n",
364 sc->sc_dev.dv_xname, error);
365 goto fail_3;
366 }
367
368 /*
369 * Create the transmit buffer DMA maps.
370 */
371 for (i = 0; i < EMAC_TXQUEUELEN; i++) {
372 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
373 EMAC_NTXSEGS, MCLBYTES, 0, 0,
374 &sc->sc_txsoft[i].txs_dmamap)) != 0) {
375 printf("%s: unable to create tx DMA map %d, "
376 "error = %d\n", sc->sc_dev.dv_xname, i, error);
377 goto fail_4;
378 }
379 }
380
381 /*
382 * Create the receive buffer DMA maps.
383 */
384 for (i = 0; i < EMAC_NRXDESC; i++) {
385 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1,
386 MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) {
387 printf("%s: unable to create rx DMA map %d, "
388 "error = %d\n", sc->sc_dev.dv_xname, i, error);
389 goto fail_5;
390 }
391 sc->sc_rxsoft[i].rxs_mbuf = NULL;
392 }
393
394 /*
395 * Reset the chip to a known state.
396 */
397 emac_reset(sc);
398
399 /* Fetch the Ethernet address. */
400 if (devprop_get(&sc->sc_dev, "mac-addr", enaddr,
401 sizeof(enaddr), NULL) != sizeof(enaddr)) {
402 printf("%s: unable to get mac-addr property\n",
403 sc->sc_dev.dv_xname);
404 return;
405 }
406
407 printf("%s: Ethernet address %s\n", sc->sc_dev.dv_xname,
408 ether_sprintf(enaddr));
409
410 /*
411 * Initialise the media structures.
412 */
413 mii->mii_ifp = ifp;
414 mii->mii_readreg = emac_mii_readreg;
415 mii->mii_writereg = emac_mii_writereg;
416 mii->mii_statchg = emac_mii_statchg;
417
418 ifmedia_init(&mii->mii_media, 0, emac_mediachange,
419 emac_mediastatus);
420 mii_attach(&sc->sc_dev, mii, 0xffffffff,
421 MII_PHY_ANY, MII_OFFSET_ANY, 0);
422 if (LIST_FIRST(&mii->mii_phys) == NULL) {
423 ifmedia_add(&mii->mii_media, IFM_ETHER|IFM_NONE, 0, NULL);
424 ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_NONE);
425 } else
426 ifmedia_set(&mii->mii_media, IFM_ETHER|IFM_AUTO);
427
428 ifp = &sc->sc_ethercom.ec_if;
429 strcpy(ifp->if_xname, sc->sc_dev.dv_xname);
430 ifp->if_softc = sc;
431 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
432 ifp->if_ioctl = emac_ioctl;
433 ifp->if_start = emac_start;
434 ifp->if_watchdog = emac_watchdog;
435 ifp->if_init = emac_init;
436 ifp->if_stop = emac_stop;
437 IFQ_SET_READY(&ifp->if_snd);
438
439 /*
440 * We can support 802.1Q VLAN-sized frames.
441 */
442 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU;
443
444 /*
445 * Attach the interface.
446 */
447 if_attach(ifp);
448 ether_ifattach(ifp, enaddr);
449
450 #ifdef EMAC_EVENT_COUNTERS
451 /*
452 * Attach the event counters.
453 */
454 evcnt_attach_dynamic(&sc->sc_ev_rxintr, EVCNT_TYPE_INTR,
455 NULL, sc->sc_dev.dv_xname, "rxintr");
456 evcnt_attach_dynamic(&sc->sc_ev_txintr, EVCNT_TYPE_INTR,
457 NULL, sc->sc_dev.dv_xname, "txintr");
458 evcnt_attach_dynamic(&sc->sc_ev_rxde, EVCNT_TYPE_INTR,
459 NULL, sc->sc_dev.dv_xname, "rxde");
460 evcnt_attach_dynamic(&sc->sc_ev_txde, EVCNT_TYPE_INTR,
461 NULL, sc->sc_dev.dv_xname, "txde");
462 evcnt_attach_dynamic(&sc->sc_ev_wol, EVCNT_TYPE_INTR,
463 NULL, sc->sc_dev.dv_xname, "wol");
464 evcnt_attach_dynamic(&sc->sc_ev_serr, EVCNT_TYPE_INTR,
465 NULL, sc->sc_dev.dv_xname, "serr");
466 evcnt_attach_dynamic(&sc->sc_ev_intr, EVCNT_TYPE_INTR,
467 NULL, sc->sc_dev.dv_xname, "intr");
468
469 evcnt_attach_dynamic(&sc->sc_ev_txreap, EVCNT_TYPE_MISC,
470 NULL, sc->sc_dev.dv_xname, "txreap");
471 evcnt_attach_dynamic(&sc->sc_ev_txsstall, EVCNT_TYPE_MISC,
472 NULL, sc->sc_dev.dv_xname, "txsstall");
473 evcnt_attach_dynamic(&sc->sc_ev_txdstall, EVCNT_TYPE_MISC,
474 NULL, sc->sc_dev.dv_xname, "txdstall");
475 evcnt_attach_dynamic(&sc->sc_ev_txdrop, EVCNT_TYPE_MISC,
476 NULL, sc->sc_dev.dv_xname, "txdrop");
477 evcnt_attach_dynamic(&sc->sc_ev_tu, EVCNT_TYPE_MISC,
478 NULL, sc->sc_dev.dv_xname, "tu");
479 #endif /* EMAC_EVENT_COUNTERS */
480
481 /*
482 * Make sure the interface is shutdown during reboot.
483 */
484 sc->sc_sdhook = shutdownhook_establish(emac_shutdown, sc);
485 if (sc->sc_sdhook == NULL)
486 printf("%s: WARNING: unable to establish shutdown hook\n",
487 sc->sc_dev.dv_xname);
488
489 return;
490
491 /*
492 * Free any resources we've allocated during the failed attach
493 * attempt. Do this in reverse order and fall through.
494 */
495 fail_5:
496 for (i = 0; i < EMAC_NRXDESC; i++) {
497 if (sc->sc_rxsoft[i].rxs_dmamap != NULL)
498 bus_dmamap_destroy(sc->sc_dmat,
499 sc->sc_rxsoft[i].rxs_dmamap);
500 }
501 fail_4:
502 for (i = 0; i < EMAC_TXQUEUELEN; i++) {
503 if (sc->sc_txsoft[i].txs_dmamap != NULL)
504 bus_dmamap_destroy(sc->sc_dmat,
505 sc->sc_txsoft[i].txs_dmamap);
506 }
507 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap);
508 fail_3:
509 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap);
510 fail_2:
511 bus_dmamem_unmap(sc->sc_dmat, (caddr_t)sc->sc_control_data,
512 sizeof(struct emac_control_data));
513 fail_1:
514 bus_dmamem_free(sc->sc_dmat, &seg, nseg);
515 fail_0:
516 return;
517 }
518
519 /*
520 * Device shutdown routine.
521 */
522 static void
523 emac_shutdown(void *arg)
524 {
525 struct emac_softc *sc = arg;
526
527 emac_stop(&sc->sc_ethercom.ec_if, 0);
528 }
529
530 /* ifnet interface function */
531 static void
532 emac_start(struct ifnet *ifp)
533 {
534 struct emac_softc *sc = ifp->if_softc;
535 struct mbuf *m0;
536 struct emac_txsoft *txs;
537 bus_dmamap_t dmamap;
538 int error, firsttx, nexttx, lasttx, ofree, seg;
539
540 lasttx = 0; /* XXX gcc */
541
542 if ((ifp->if_flags & (IFF_RUNNING|IFF_OACTIVE)) != IFF_RUNNING)
543 return;
544
545 /*
546 * Remember the previous number of free descriptors.
547 */
548 ofree = sc->sc_txfree;
549
550 /*
551 * Loop through the send queue, setting up transmit descriptors
552 * until we drain the queue, or use up all available transmit
553 * descriptors.
554 */
555 for (;;) {
556 /* Grab a packet off the queue. */
557 IFQ_POLL(&ifp->if_snd, m0);
558 if (m0 == NULL)
559 break;
560
561 /*
562 * Get a work queue entry. Reclaim used Tx descriptors if
563 * we are running low.
564 */
565 if (sc->sc_txsfree < EMAC_TXQUEUE_GC) {
566 emac_txreap(sc);
567 if (sc->sc_txsfree == 0) {
568 EMAC_EVCNT_INCR(&sc->sc_ev_txsstall);
569 break;
570 }
571 }
572
573 txs = &sc->sc_txsoft[sc->sc_txsnext];
574 dmamap = txs->txs_dmamap;
575
576 /*
577 * Load the DMA map. If this fails, the packet either
578 * didn't fit in the alloted number of segments, or we
579 * were short on resources. In this case, we'll copy
580 * and try again.
581 */
582 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0,
583 BUS_DMA_WRITE|BUS_DMA_NOWAIT);
584 if (error) {
585 if (error == EFBIG) {
586 EMAC_EVCNT_INCR(&sc->sc_ev_txdrop);
587 printf("%s: Tx packet consumes too many "
588 "DMA segments, dropping...\n",
589 sc->sc_dev.dv_xname);
590 IFQ_DEQUEUE(&ifp->if_snd, m0);
591 m_freem(m0);
592 continue;
593 }
594 /* Short on resources, just stop for now. */
595 break;
596 }
597
598 /*
599 * Ensure we have enough descriptors free to describe
600 * the packet.
601 */
602 if (dmamap->dm_nsegs > sc->sc_txfree) {
603 /*
604 * Not enough free descriptors to transmit this
605 * packet. We haven't committed anything yet,
606 * so just unload the DMA map, put the packet
607 * back on the queue, and punt. Notify the upper
608 * layer that there are not more slots left.
609 *
610 */
611 ifp->if_flags |= IFF_OACTIVE;
612 bus_dmamap_unload(sc->sc_dmat, dmamap);
613 EMAC_EVCNT_INCR(&sc->sc_ev_txdstall);
614 break;
615 }
616
617 IFQ_DEQUEUE(&ifp->if_snd, m0);
618
619 /*
620 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET.
621 */
622
623 /* Sync the DMA map. */
624 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize,
625 BUS_DMASYNC_PREWRITE);
626
627 /*
628 * Store a pointer to the packet so that we can free it
629 * later.
630 */
631 txs->txs_mbuf = m0;
632 txs->txs_firstdesc = sc->sc_txnext;
633 txs->txs_ndesc = dmamap->dm_nsegs;
634
635 /*
636 * Initialize the transmit descriptor.
637 */
638 firsttx = sc->sc_txnext;
639 for (nexttx = sc->sc_txnext, seg = 0;
640 seg < dmamap->dm_nsegs;
641 seg++, nexttx = EMAC_NEXTTX(nexttx)) {
642 /*
643 * If this is the first descriptor we're
644 * enqueueing, don't set the TX_READY bit just
645 * yet. That could cause a race condition.
646 * We'll do it below.
647 */
648 sc->sc_txdescs[nexttx].md_data =
649 dmamap->dm_segs[seg].ds_addr;
650 sc->sc_txdescs[nexttx].md_data_len =
651 dmamap->dm_segs[seg].ds_len;
652 sc->sc_txdescs[nexttx].md_stat_ctrl =
653 (sc->sc_txdescs[nexttx].md_stat_ctrl & MAL_TX_WRAP) |
654 (nexttx == firsttx ? 0 : MAL_TX_READY) |
655 EMAC_TXC_GFCS | EMAC_TXC_GPAD;
656 lasttx = nexttx;
657 }
658
659 /* Set the LAST bit on the last segment. */
660 sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_LAST;
661
662 /*
663 * Set up last segment descriptor to send an interrupt after
664 * that descriptor is transmitted, and bypass existing Tx
665 * descriptor reaping method (for now...).
666 */
667 sc->sc_txdescs[lasttx].md_stat_ctrl |= MAL_TX_INTERRUPT;
668
669
670 txs->txs_lastdesc = lasttx;
671
672 /* Sync the descriptors we're using. */
673 EMAC_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs,
674 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
675
676 /*
677 * The entire packet chain is set up. Give the
678 * first descriptor to the chip now.
679 */
680 sc->sc_txdescs[firsttx].md_stat_ctrl |= MAL_TX_READY;
681 EMAC_CDTXSYNC(sc, firsttx, 1,
682 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
683 /*
684 * Tell the EMAC that a new packet is available.
685 */
686 EMAC_WRITE(sc, EMAC_TMR0, TMR0_GNP0);
687
688 /* Advance the tx pointer. */
689 sc->sc_txfree -= txs->txs_ndesc;
690 sc->sc_txnext = nexttx;
691
692 sc->sc_txsfree--;
693 sc->sc_txsnext = EMAC_NEXTTXS(sc->sc_txsnext);
694
695 #if NBPFILTER > 0
696 /*
697 * Pass the packet to any BPF listeners.
698 */
699 if (ifp->if_bpf)
700 bpf_mtap(ifp->if_bpf, m0);
701 #endif /* NBPFILTER > 0 */
702 }
703
704 if (sc->sc_txfree == 0) {
705 /* No more slots left; notify upper layer. */
706 ifp->if_flags |= IFF_OACTIVE;
707 }
708
709 if (sc->sc_txfree != ofree) {
710 /* Set a watchdog timer in case the chip flakes out. */
711 ifp->if_timer = 5;
712 }
713 }
714
715 static int
716 emac_init(struct ifnet *ifp)
717 {
718 struct emac_softc *sc = ifp->if_softc;
719 struct emac_rxsoft *rxs;
720 uint8_t *enaddr = LLADDR(ifp->if_sadl);
721 int error, i;
722
723 error = 0;
724
725 /* Cancel any pending I/O. */
726 emac_stop(ifp, 0);
727
728 /* Reset the chip to a known state. */
729 emac_reset(sc);
730
731 /*
732 * Initialise the transmit descriptor ring.
733 */
734 memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs));
735 /* set wrap on last descriptor */
736 sc->sc_txdescs[EMAC_NTXDESC - 1].md_stat_ctrl |= MAL_TX_WRAP;
737 EMAC_CDTXSYNC(sc, 0, EMAC_NTXDESC,
738 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
739 sc->sc_txfree = EMAC_NTXDESC;
740 sc->sc_txnext = 0;
741
742 /*
743 * Initialise the transmit job descriptors.
744 */
745 for (i = 0; i < EMAC_TXQUEUELEN; i++)
746 sc->sc_txsoft[i].txs_mbuf = NULL;
747 sc->sc_txsfree = EMAC_TXQUEUELEN;
748 sc->sc_txsnext = 0;
749 sc->sc_txsdirty = 0;
750
751 /*
752 * Initialise the receiver descriptor and receive job
753 * descriptor rings.
754 */
755 for (i = 0; i < EMAC_NRXDESC; i++) {
756 rxs = &sc->sc_rxsoft[i];
757 if (rxs->rxs_mbuf == NULL) {
758 if ((error = emac_add_rxbuf(sc, i)) != 0) {
759 printf("%s: unable to allocate or map rx "
760 "buffer %d, error = %d\n",
761 sc->sc_dev.dv_xname, i, error);
762 /*
763 * XXX Should attempt to run with fewer receive
764 * XXX buffers instead of just failing.
765 */
766 emac_rxdrain(sc);
767 goto out;
768 }
769 } else
770 EMAC_INIT_RXDESC(sc, i);
771 }
772 sc->sc_rxptr = 0;
773
774 /*
775 * Set the current media.
776 */
777 mii_mediachg(&sc->sc_mii);
778
779 /*
780 * Give the transmit and receive rings to the MAL.
781 */
782 mtdcr(DCR_MAL0_TXCTP0R, EMAC_CDTXADDR(sc, 0));
783 mtdcr(DCR_MAL0_RXCTP0R, EMAC_CDRXADDR(sc, 0));
784
785 /*
786 * Load the MAC address.
787 */
788 EMAC_WRITE(sc, EMAC_IAHR, enaddr[0] << 8 | enaddr[1]);
789 EMAC_WRITE(sc, EMAC_IALR,
790 enaddr[2] << 24 | enaddr[3] << 16 | enaddr[4] << 8 | enaddr[5]);
791
792 /*
793 * Set the receive channel buffer size (in units of 16 bytes).
794 */
795 #if MCLBYTES > (4096 - 16) /* XXX! */
796 # error MCLBYTES > max rx channel buffer size
797 #endif
798 mtdcr(DCR_MAL0_RCBS0, MCLBYTES / 16);
799
800 /* Set fifos, media modes. */
801 EMAC_WRITE(sc, EMAC_MR1, sc->sc_mr1);
802
803 /*
804 * Enable Individual and (possibly) Broadcast Address modes,
805 * runt packets, and strip padding.
806 */
807 EMAC_WRITE(sc, EMAC_RMR, RMR_IAE | RMR_RRP | RMR_SP |
808 (ifp->if_flags & IFF_PROMISC ? RMR_PME : 0) |
809 (ifp->if_flags & IFF_BROADCAST ? RMR_BAE : 0));
810
811 /*
812 * Set low- and urgent-priority request thresholds.
813 */
814 EMAC_WRITE(sc, EMAC_TMR1,
815 ((7 << TMR1_TLR_SHIFT) & TMR1_TLR_MASK) | /* 16 word burst */
816 ((15 << TMR1_TUR_SHIFT) & TMR1_TUR_MASK));
817 /*
818 * Set Transmit Request Threshold Register.
819 */
820 EMAC_WRITE(sc, EMAC_TRTR, TRTR_256);
821
822 /*
823 * Set high and low receive watermarks.
824 */
825 EMAC_WRITE(sc, EMAC_RWMR,
826 30 << RWMR_RLWM_SHIFT | 64 << RWMR_RLWM_SHIFT);
827
828 /*
829 * Set frame gap.
830 */
831 EMAC_WRITE(sc, EMAC_IPGVR, 8);
832
833 /*
834 * Set interrupt status enable bits for EMAC and MAL.
835 */
836 EMAC_WRITE(sc, EMAC_ISER,
837 ISR_BP | ISR_SE | ISR_ALE | ISR_BFCS | ISR_PTLE | ISR_ORE | ISR_IRE);
838 mtdcr(DCR_MAL0_IER, MAL0_IER_DE | MAL0_IER_NWE | MAL0_IER_TO |
839 MAL0_IER_OPB | MAL0_IER_PLB);
840
841 /*
842 * Enable the transmit and receive channel on the MAL.
843 */
844 mtdcr(DCR_MAL0_RXCASR, MAL0_RXCASR_CHAN0);
845 mtdcr(DCR_MAL0_TXCASR, MAL0_TXCASR_CHAN0);
846
847 /*
848 * Enable the transmit and receive channel on the EMAC.
849 */
850 EMAC_WRITE(sc, EMAC_MR0, MR0_TXE | MR0_RXE);
851
852 /*
853 * Start the one second MII clock.
854 */
855 callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc);
856
857 /*
858 * ... all done!
859 */
860 ifp->if_flags |= IFF_RUNNING;
861 ifp->if_flags &= ~IFF_OACTIVE;
862
863 out:
864 if (error) {
865 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
866 ifp->if_timer = 0;
867 printf("%s: interface not running\n", sc->sc_dev.dv_xname);
868 }
869 return (error);
870 }
871
872 static int
873 emac_add_rxbuf(struct emac_softc *sc, int idx)
874 {
875 struct emac_rxsoft *rxs = &sc->sc_rxsoft[idx];
876 struct mbuf *m;
877 int error;
878
879 MGETHDR(m, M_DONTWAIT, MT_DATA);
880 if (m == NULL)
881 return (ENOBUFS);
882
883 MCLGET(m, M_DONTWAIT);
884 if ((m->m_flags & M_EXT) == 0) {
885 m_freem(m);
886 return (ENOBUFS);
887 }
888
889 if (rxs->rxs_mbuf != NULL)
890 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
891
892 rxs->rxs_mbuf = m;
893
894 error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap,
895 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, BUS_DMA_NOWAIT);
896 if (error) {
897 printf("%s: can't load rx DMA map %d, error = %d\n",
898 sc->sc_dev.dv_xname, idx, error);
899 panic("emac_add_rxbuf"); /* XXX */
900 }
901
902 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
903 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD);
904
905 EMAC_INIT_RXDESC(sc, idx);
906
907 return (0);
908 }
909
910 /* ifnet interface function */
911 static void
912 emac_watchdog(struct ifnet *ifp)
913 {
914 struct emac_softc *sc = ifp->if_softc;
915
916 /*
917 * Since we're not interrupting every packet, sweep
918 * up before we report an error.
919 */
920 emac_txreap(sc);
921
922 if (sc->sc_txfree != EMAC_NTXDESC) {
923 printf("%s: device timeout (txfree %d txsfree %d txnext %d)\n",
924 sc->sc_dev.dv_xname, sc->sc_txfree, sc->sc_txsfree,
925 sc->sc_txnext);
926 ifp->if_oerrors++;
927
928 /* Reset the interface. */
929 (void)emac_init(ifp);
930 } else if (ifp->if_flags & IFF_DEBUG)
931 printf("%s: recovered from device timeout\n",
932 sc->sc_dev.dv_xname);
933
934 /* try to get more packets going */
935 emac_start(ifp);
936 }
937
938 static void
939 emac_rxdrain(struct emac_softc *sc)
940 {
941 struct emac_rxsoft *rxs;
942 int i;
943
944 for (i = 0; i < EMAC_NRXDESC; i++) {
945 rxs = &sc->sc_rxsoft[i];
946 if (rxs->rxs_mbuf != NULL) {
947 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap);
948 m_freem(rxs->rxs_mbuf);
949 rxs->rxs_mbuf = NULL;
950 }
951 }
952 }
953
954 /* ifnet interface function */
955 static void
956 emac_stop(struct ifnet *ifp, int disable)
957 {
958 struct emac_softc *sc = ifp->if_softc;
959 struct emac_txsoft *txs;
960 int i;
961
962 /* Stop the one second clock. */
963 callout_stop(&sc->sc_callout);
964
965 /* Down the MII */
966 mii_down(&sc->sc_mii);
967
968 /* Disable interrupts. */
969 #if 0 /* Can't disable MAL interrupts without a reset... */
970 EMAC_WRITE(sc, EMAC_ISER, 0);
971 #endif
972 mtdcr(DCR_MAL0_IER, 0);
973
974 /* Disable the receive and transmit channels. */
975 mtdcr(DCR_MAL0_RXCARR, MAL0_RXCARR_CHAN0);
976 mtdcr(DCR_MAL0_TXCARR, MAL0_TXCARR_CHAN0 | MAL0_TXCARR_CHAN1);
977
978 /* Disable the transmit enable and receive MACs. */
979 EMAC_WRITE(sc, EMAC_MR0,
980 EMAC_READ(sc, EMAC_MR0) & ~(MR0_TXE | MR0_RXE));
981
982 /* Release any queued transmit buffers. */
983 for (i = 0; i < EMAC_TXQUEUELEN; i++) {
984 txs = &sc->sc_txsoft[i];
985 if (txs->txs_mbuf != NULL) {
986 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
987 m_freem(txs->txs_mbuf);
988 txs->txs_mbuf = NULL;
989 }
990 }
991
992 if (disable)
993 emac_rxdrain(sc);
994
995 /*
996 * Mark the interface down and cancel the watchdog timer.
997 */
998 ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
999 ifp->if_timer = 0;
1000 }
1001
1002 /* ifnet interface function */
1003 static int
1004 emac_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
1005 {
1006 struct emac_softc *sc = ifp->if_softc;
1007 struct ifreq *ifr = (struct ifreq *)data;
1008 int s, error;
1009
1010 s = splnet();
1011
1012 switch (cmd) {
1013 case SIOCSIFMEDIA:
1014 case SIOCGIFMEDIA:
1015 error = ifmedia_ioctl(ifp, ifr, &sc->sc_mii.mii_media, cmd);
1016 break;
1017
1018 default:
1019 error = ether_ioctl(ifp, cmd, data);
1020 if (error == ENETRESET) {
1021 /*
1022 * Multicast list has changed; set the hardware filter
1023 * accordingly.
1024 */
1025 if (ifp->if_flags & IFF_RUNNING)
1026 error = emac_set_filter(sc);
1027 else
1028 error = 0;
1029 }
1030 break;
1031 }
1032
1033 /* try to get more packets going */
1034 emac_start(ifp);
1035
1036 splx(s);
1037 return (error);
1038 }
1039
1040 static void
1041 emac_reset(struct emac_softc *sc)
1042 {
1043
1044 /* reset the MAL */
1045 mtdcr(DCR_MAL0_CFG, MAL0_CFG_SR);
1046
1047 EMAC_WRITE(sc, EMAC_MR0, MR0_SRST);
1048 delay(5);
1049
1050 /* XXX: check if MR0_SRST is clear until a timeout instead? */
1051 EMAC_WRITE(sc, EMAC_MR0, EMAC_READ(sc, EMAC_MR0) & ~MR0_SRST);
1052
1053 /* XXX clear interrupts in EMAC_ISR just to be sure?? */
1054
1055 /* set the MAL config register */
1056 mtdcr(DCR_MAL0_CFG, MAL0_CFG_PLBB | MAL0_CFG_OPBBL | MAL0_CFG_LEA |
1057 MAL0_CFG_SD | MAL0_CFG_PLBLT);
1058 }
1059
1060 static int
1061 emac_set_filter(struct emac_softc *sc)
1062 {
1063 struct ether_multistep step;
1064 struct ether_multi *enm;
1065 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1066 uint32_t rmr, crc, gaht[4] = {0, 0, 0, 0};
1067 int category, cnt = 0;
1068
1069 rmr = EMAC_READ(sc, EMAC_RMR);
1070 rmr &= ~(RMR_PMME | RMR_MAE);
1071 ifp->if_flags &= ~IFF_ALLMULTI;
1072
1073 ETHER_FIRST_MULTI(step, &sc->sc_ethercom, enm);
1074 while (enm != NULL) {
1075 if (memcmp(enm->enm_addrlo,
1076 enm->enm_addrhi, ETHER_ADDR_LEN) != 0) {
1077 /*
1078 * We must listen to a range of multicast addresses.
1079 * For now, just accept all multicasts, rather than
1080 * trying to set only those filter bits needed to match
1081 * the range. (At this time, the only use of address
1082 * ranges is for IP multicast routing, for which the
1083 * range is big enough to require all bits set.)
1084 */
1085 gaht[0] = gaht[1] = gaht[2] = gaht[3] = 0xffff;
1086 break;
1087 }
1088
1089 crc = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN);
1090
1091 /* Just want the 6 most significant bits. */
1092 category = crc >> 26;
1093 EMAC_SET_FILTER(gaht, category);
1094
1095 ETHER_NEXT_MULTI(step, enm);
1096 cnt++;
1097 }
1098
1099 if ((gaht[0] & gaht[1] & gaht[2] & gaht[3]) == 0xffff) {
1100 /* All categories are true. */
1101 ifp->if_flags |= IFF_ALLMULTI;
1102 rmr |= RMR_PMME;
1103 } else if (cnt != 0) {
1104 /* Some categories are true. */
1105 EMAC_WRITE(sc, EMAC_GAHT1, gaht[0]);
1106 EMAC_WRITE(sc, EMAC_GAHT2, gaht[1]);
1107 EMAC_WRITE(sc, EMAC_GAHT3, gaht[2]);
1108 EMAC_WRITE(sc, EMAC_GAHT4, gaht[3]);
1109
1110 rmr |= RMR_MAE;
1111 }
1112 EMAC_WRITE(sc, EMAC_RMR, rmr);
1113
1114 return 0;
1115 }
1116
1117 /*
1118 * EMAC General interrupt handler
1119 */
1120 static int
1121 emac_intr(void *arg)
1122 {
1123 struct emac_softc *sc = arg;
1124 uint32_t status;
1125
1126 EMAC_EVCNT_INCR(&sc->sc_ev_intr);
1127 status = EMAC_READ(sc, EMAC_ISR);
1128
1129 /* Clear the interrupt status bits. */
1130 EMAC_WRITE(sc, EMAC_ISR, status);
1131
1132 return (0);
1133 }
1134
1135 /*
1136 * EMAC Wake-On-LAN interrupt handler
1137 */
1138 static int
1139 emac_wol_intr(void *arg)
1140 {
1141 struct emac_softc *sc = arg;
1142
1143 EMAC_EVCNT_INCR(&sc->sc_ev_wol);
1144 printf("%s: emac_wol_intr\n", sc->sc_dev.dv_xname);
1145 return (0);
1146 }
1147
1148 /*
1149 * MAL System ERRor interrupt handler
1150 */
1151 static int
1152 emac_serr_intr(void *arg)
1153 {
1154 #ifdef EMAC_EVENT_COUNTERS
1155 struct emac_softc *sc = arg;
1156 #endif
1157 u_int32_t esr;
1158
1159 EMAC_EVCNT_INCR(&sc->sc_ev_serr);
1160 esr = mfdcr(DCR_MAL0_ESR);
1161
1162 /* Clear the interrupt status bits. */
1163 mtdcr(DCR_MAL0_ESR, esr);
1164 return (0);
1165 }
1166
1167 /*
1168 * MAL Transmit End-Of-Buffer interrupt handler.
1169 * NOTE: This shouldn't be called!
1170 */
1171 static int
1172 emac_txeob_intr(void *arg)
1173 {
1174 struct emac_softc *sc = arg;
1175 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1176 int handled;
1177
1178 EMAC_EVCNT_INCR(&sc->sc_ev_txintr);
1179 handled = emac_txreap(arg);
1180
1181 /* try to get more packets going */
1182 emac_start(ifp);
1183
1184 return (handled);
1185
1186 }
1187
1188 /*
1189 * Reap completed Tx descriptors.
1190 */
1191 static int
1192 emac_txreap(struct emac_softc *sc)
1193 {
1194 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1195 struct emac_txsoft *txs;
1196 int handled, i;
1197 u_int32_t txstat;
1198
1199 EMAC_EVCNT_INCR(&sc->sc_ev_txreap);
1200 handled = 0;
1201
1202 /* Clear the interrupt */
1203 mtdcr(DCR_MAL0_TXEOBISR, mfdcr(DCR_MAL0_TXEOBISR));
1204
1205 ifp->if_flags &= ~IFF_OACTIVE;
1206
1207 /*
1208 * Go through our Tx list and free mbufs for those
1209 * frames that have been transmitted.
1210 */
1211 for (i = sc->sc_txsdirty; sc->sc_txsfree != EMAC_TXQUEUELEN;
1212 i = EMAC_NEXTTXS(i), sc->sc_txsfree++) {
1213 txs = &sc->sc_txsoft[i];
1214
1215 EMAC_CDTXSYNC(sc, txs->txs_lastdesc,
1216 txs->txs_dmamap->dm_nsegs,
1217 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1218
1219 txstat = sc->sc_txdescs[txs->txs_lastdesc].md_stat_ctrl;
1220 if (txstat & MAL_TX_READY)
1221 break;
1222
1223 handled = 1;
1224
1225 /*
1226 * Check for errors and collisions.
1227 */
1228 if (txstat & (EMAC_TXS_UR | EMAC_TXS_ED))
1229 ifp->if_oerrors++;
1230
1231 #ifdef EMAC_EVENT_COUNTERS
1232 if (txstat & EMAC_TXS_UR)
1233 EMAC_EVCNT_INCR(&sc->sc_ev_tu);
1234 #endif /* EMAC_EVENT_COUNTERS */
1235
1236 if (txstat & (EMAC_TXS_EC | EMAC_TXS_MC | EMAC_TXS_SC | EMAC_TXS_LC)) {
1237 if (txstat & EMAC_TXS_EC)
1238 ifp->if_collisions += 16;
1239 else if (txstat & EMAC_TXS_MC)
1240 ifp->if_collisions += 2; /* XXX? */
1241 else if (txstat & EMAC_TXS_SC)
1242 ifp->if_collisions++;
1243 if (txstat & EMAC_TXS_LC)
1244 ifp->if_collisions++;
1245 } else
1246 ifp->if_opackets++;
1247
1248 if (ifp->if_flags & IFF_DEBUG) {
1249 if (txstat & EMAC_TXS_ED)
1250 printf("%s: excessive deferral\n",
1251 sc->sc_dev.dv_xname);
1252 if (txstat & EMAC_TXS_EC)
1253 printf("%s: excessive collisions\n",
1254 sc->sc_dev.dv_xname);
1255 }
1256
1257 sc->sc_txfree += txs->txs_ndesc;
1258 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap,
1259 0, txs->txs_dmamap->dm_mapsize, BUS_DMASYNC_POSTWRITE);
1260 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap);
1261 m_freem(txs->txs_mbuf);
1262 txs->txs_mbuf = NULL;
1263 }
1264
1265 /* Update the dirty transmit buffer pointer. */
1266 sc->sc_txsdirty = i;
1267
1268 /*
1269 * If there are no more pending transmissions, cancel the watchdog
1270 * timer.
1271 */
1272 if (sc->sc_txsfree == EMAC_TXQUEUELEN)
1273 ifp->if_timer = 0;
1274
1275 return (handled);
1276 }
1277
1278 /*
1279 * MAL Receive End-Of-Buffer interrupt handler
1280 */
1281 static int
1282 emac_rxeob_intr(void *arg)
1283 {
1284 struct emac_softc *sc = arg;
1285 struct ifnet *ifp = &sc->sc_ethercom.ec_if;
1286 struct emac_rxsoft *rxs;
1287 struct mbuf *m;
1288 u_int32_t rxstat;
1289 int i, len;
1290
1291 EMAC_EVCNT_INCR(&sc->sc_ev_rxintr);
1292
1293 /* Clear the interrupt */
1294 mtdcr(DCR_MAL0_RXEOBISR, mfdcr(DCR_MAL0_RXEOBISR));
1295
1296 for (i = sc->sc_rxptr;; i = EMAC_NEXTRX(i)) {
1297 rxs = &sc->sc_rxsoft[i];
1298
1299 EMAC_CDRXSYNC(sc, i,
1300 BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1301
1302 rxstat = sc->sc_rxdescs[i].md_stat_ctrl;
1303
1304 if (rxstat & MAL_RX_EMPTY)
1305 /*
1306 * We have processed all of the receive buffers.
1307 */
1308 break;
1309
1310 /*
1311 * If an error occurred, update stats, clear the status
1312 * word, and leave the packet buffer in place. It will
1313 * simply be reused the next time the ring comes around.
1314 */
1315 if (rxstat & (EMAC_RXS_OE | EMAC_RXS_BP | EMAC_RXS_SE |
1316 EMAC_RXS_AE | EMAC_RXS_BFCS | EMAC_RXS_PTL | EMAC_RXS_ORE |
1317 EMAC_RXS_IRE)) {
1318 #define PRINTERR(bit, str) \
1319 if (rxstat & (bit)) \
1320 printf("%s: receive error: %s\n", \
1321 sc->sc_dev.dv_xname, str)
1322 ifp->if_ierrors++;
1323 PRINTERR(EMAC_RXS_OE, "overrun error");
1324 PRINTERR(EMAC_RXS_BP, "bad packet");
1325 PRINTERR(EMAC_RXS_RP, "runt packet");
1326 PRINTERR(EMAC_RXS_SE, "short event");
1327 PRINTERR(EMAC_RXS_AE, "alignment error");
1328 PRINTERR(EMAC_RXS_BFCS, "bad FCS");
1329 PRINTERR(EMAC_RXS_PTL, "packet too long");
1330 PRINTERR(EMAC_RXS_ORE, "out of range error");
1331 PRINTERR(EMAC_RXS_IRE, "in range error");
1332 #undef PRINTERR
1333 EMAC_INIT_RXDESC(sc, i);
1334 continue;
1335 }
1336
1337 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1338 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD);
1339
1340 /*
1341 * No errors; receive the packet. Note, the 405GP emac
1342 * includes the CRC with every packet.
1343 */
1344 len = sc->sc_rxdescs[i].md_data_len - ETHER_CRC_LEN;
1345
1346 /*
1347 * If the packet is small enough to fit in a
1348 * single header mbuf, allocate one and copy
1349 * the data into it. This greatly reduces
1350 * memory consumption when we receive lots
1351 * of small packets.
1352 *
1353 * Otherwise, we add a new buffer to the receive
1354 * chain. If this fails, we drop the packet and
1355 * recycle the old buffer.
1356 */
1357 if (emac_copy_small != 0 && len <= MHLEN) {
1358 MGETHDR(m, M_DONTWAIT, MT_DATA);
1359 if (m == NULL)
1360 goto dropit;
1361 memcpy(mtod(m, caddr_t),
1362 mtod(rxs->rxs_mbuf, caddr_t), len);
1363 EMAC_INIT_RXDESC(sc, i);
1364 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0,
1365 rxs->rxs_dmamap->dm_mapsize,
1366 BUS_DMASYNC_PREREAD);
1367 } else {
1368 m = rxs->rxs_mbuf;
1369 if (emac_add_rxbuf(sc, i) != 0) {
1370 dropit:
1371 ifp->if_ierrors++;
1372 EMAC_INIT_RXDESC(sc, i);
1373 bus_dmamap_sync(sc->sc_dmat,
1374 rxs->rxs_dmamap, 0,
1375 rxs->rxs_dmamap->dm_mapsize,
1376 BUS_DMASYNC_PREREAD);
1377 continue;
1378 }
1379 }
1380
1381 ifp->if_ipackets++;
1382 m->m_pkthdr.rcvif = ifp;
1383 m->m_pkthdr.len = m->m_len = len;
1384
1385 #if NBPFILTER > 0
1386 /*
1387 * Pass this up to any BPF listeners, but only
1388 * pass if up the stack if it's for us.
1389 */
1390 if (ifp->if_bpf)
1391 bpf_mtap(ifp->if_bpf, m);
1392 #endif /* NBPFILTER > 0 */
1393
1394 /* Pass it on. */
1395 (*ifp->if_input)(ifp, m);
1396 }
1397
1398 /* Update the receive pointer. */
1399 sc->sc_rxptr = i;
1400
1401 return (0);
1402 }
1403
1404 /*
1405 * MAL Transmit Descriptor Error interrupt handler
1406 */
1407 static int
1408 emac_txde_intr(void *arg)
1409 {
1410 struct emac_softc *sc = arg;
1411
1412 EMAC_EVCNT_INCR(&sc->sc_ev_txde);
1413 printf("%s: emac_txde_intr\n", sc->sc_dev.dv_xname);
1414 return (0);
1415 }
1416
1417 /*
1418 * MAL Receive Descriptor Error interrupt handler
1419 */
1420 static int
1421 emac_rxde_intr(void *arg)
1422 {
1423 int i;
1424 struct emac_softc *sc = arg;
1425
1426 EMAC_EVCNT_INCR(&sc->sc_ev_rxde);
1427 printf("%s: emac_rxde_intr\n", sc->sc_dev.dv_xname);
1428 /*
1429 * XXX!
1430 * This is a bit drastic; we just drop all descriptors that aren't
1431 * "clean". We should probably send any that are up the stack.
1432 */
1433 for (i = 0; i < EMAC_NRXDESC; i++) {
1434 EMAC_CDRXSYNC(sc, i, BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
1435
1436 if (sc->sc_rxdescs[i].md_data_len != MCLBYTES) {
1437 EMAC_INIT_RXDESC(sc, i);
1438 }
1439
1440 }
1441
1442 /* Reenable the receive channel */
1443 mtdcr(DCR_MAL0_RXCASR, MAL0_RXCASR_CHAN0);
1444
1445 /* Clear the interrupt */
1446 mtdcr(DCR_MAL0_RXDEIR, mfdcr(DCR_MAL0_RXDEIR));
1447
1448 return (0);
1449 }
1450
1451 static uint32_t
1452 emac_mii_wait(struct emac_softc *sc)
1453 {
1454 int i;
1455 uint32_t reg;
1456
1457 /* wait for PHY data transfer to complete */
1458 i = 0;
1459 while ((reg = EMAC_READ(sc, EMAC_STACR) & STACR_OC) == 0) {
1460 delay(7);
1461 if (i++ > 5) {
1462 printf("%s: MII timed out\n", sc->sc_dev.dv_xname);
1463 return (0);
1464 }
1465 }
1466 return (reg);
1467 }
1468
1469 static int
1470 emac_mii_readreg(struct device *self, int phy, int reg)
1471 {
1472 struct emac_softc *sc = (struct emac_softc *)self;
1473 uint32_t sta_reg;
1474
1475 /* wait for PHY data transfer to complete */
1476 if (emac_mii_wait(sc) == 0)
1477 return (0);
1478
1479 sta_reg = reg << STACR_PRASHIFT;
1480 sta_reg |= STACR_READ;
1481 sta_reg |= phy << STACR_PCDASHIFT;
1482
1483 sta_reg &= ~STACR_OPBC_MASK;
1484 sta_reg |= STACR_OPBC_50MHZ;
1485
1486
1487 EMAC_WRITE(sc, EMAC_STACR, sta_reg);
1488
1489 if ((sta_reg = emac_mii_wait(sc)) == 0)
1490 return (0);
1491 sta_reg = EMAC_READ(sc, EMAC_STACR);
1492 if ((sta_reg & STACR_PHYE) != 0)
1493 return (0);
1494 return (sta_reg >> STACR_PHYDSHIFT);
1495 }
1496
1497 static void
1498 emac_mii_writereg(struct device *self, int phy, int reg, int val)
1499 {
1500 struct emac_softc *sc = (struct emac_softc *)self;
1501 uint32_t sta_reg;
1502
1503 /* wait for PHY data transfer to complete */
1504 if (emac_mii_wait(sc) == 0)
1505 return;
1506
1507 sta_reg = reg << STACR_PRASHIFT;
1508 sta_reg |= STACR_WRITE;
1509 sta_reg |= phy << STACR_PCDASHIFT;
1510
1511 sta_reg &= ~STACR_OPBC_MASK;
1512 sta_reg |= STACR_OPBC_50MHZ;
1513
1514 sta_reg |= val << STACR_PHYDSHIFT;
1515
1516 EMAC_WRITE(sc, EMAC_STACR, sta_reg);
1517
1518 if ((sta_reg = emac_mii_wait(sc)) == 0)
1519 return;
1520 if ((sta_reg & STACR_PHYE) != 0)
1521 /* error */
1522 return;
1523 }
1524
1525 static void
1526 emac_mii_statchg(struct device *self)
1527 {
1528 struct emac_softc *sc = (void *)self;
1529
1530 if (sc->sc_mii.mii_media_active & IFM_FDX)
1531 sc->sc_mr1 |= MR1_FDE;
1532 else
1533 sc->sc_mr1 &= ~(MR1_FDE | MR1_EIFC);
1534
1535 /* XXX 802.1x flow-control? */
1536
1537 /*
1538 * MR1 can only be written immediately after a reset...
1539 */
1540 emac_reset(sc);
1541 }
1542
1543 static void
1544 emac_mii_tick(void *arg)
1545 {
1546 struct emac_softc *sc = arg;
1547 int s;
1548
1549 if ((sc->sc_dev.dv_flags & DVF_ACTIVE) == 0)
1550 return;
1551
1552 s = splnet();
1553 mii_tick(&sc->sc_mii);
1554 splx(s);
1555
1556 callout_reset(&sc->sc_callout, hz, emac_mii_tick, sc);
1557 }
1558
1559 /* ifmedia interface function */
1560 static void
1561 emac_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr)
1562 {
1563 struct emac_softc *sc = ifp->if_softc;
1564
1565 mii_pollstat(&sc->sc_mii);
1566
1567 ifmr->ifm_status = sc->sc_mii.mii_media_status;
1568 ifmr->ifm_active = sc->sc_mii.mii_media_active;
1569 }
1570
1571 /* ifmedia interface function */
1572 static int
1573 emac_mediachange(struct ifnet *ifp)
1574 {
1575 struct emac_softc *sc = ifp->if_softc;
1576
1577 if (ifp->if_flags & IFF_UP)
1578 mii_mediachg(&sc->sc_mii);
1579 return (0);
1580 }
1581