Home | History | Annotate | Line # | Download | only in oea
oea_machdep.c revision 1.73
      1 /*	$NetBSD: oea_machdep.c,v 1.73 2016/05/30 13:04:24 chs Exp $	*/
      2 
      3 /*
      4  * Copyright (C) 2002 Matt Thomas
      5  * Copyright (C) 1995, 1996 Wolfgang Solfrank.
      6  * Copyright (C) 1995, 1996 TooLs GmbH.
      7  * All rights reserved.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. All advertising materials mentioning features or use of this software
     18  *    must display the following acknowledgement:
     19  *	This product includes software developed by TooLs GmbH.
     20  * 4. The name of TooLs GmbH may not be used to endorse or promote products
     21  *    derived from this software without specific prior written permission.
     22  *
     23  * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
     24  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     25  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     26  * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
     27  * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
     28  * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
     29  * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
     30  * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
     31  * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
     32  * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     33  */
     34 
     35 #include <sys/cdefs.h>
     36 __KERNEL_RCSID(0, "$NetBSD: oea_machdep.c,v 1.73 2016/05/30 13:04:24 chs Exp $");
     37 
     38 #include "opt_ppcarch.h"
     39 #include "opt_compat_netbsd.h"
     40 #include "opt_ddb.h"
     41 #include "opt_kgdb.h"
     42 #include "opt_ipkdb.h"
     43 #include "opt_multiprocessor.h"
     44 #include "opt_altivec.h"
     45 
     46 #include <sys/param.h>
     47 #include <sys/buf.h>
     48 #include <sys/boot_flag.h>
     49 #include <sys/exec.h>
     50 #include <sys/kernel.h>
     51 #include <sys/mbuf.h>
     52 #include <sys/mount.h>
     53 #include <sys/msgbuf.h>
     54 #include <sys/proc.h>
     55 #include <sys/reboot.h>
     56 #include <sys/syscallargs.h>
     57 #include <sys/syslog.h>
     58 #include <sys/systm.h>
     59 #include <sys/cpu.h>
     60 
     61 #include <uvm/uvm_extern.h>
     62 
     63 #ifdef DDB
     64 #include <powerpc/db_machdep.h>
     65 #include <ddb/db_extern.h>
     66 #endif
     67 
     68 #ifdef KGDB
     69 #include <sys/kgdb.h>
     70 #endif
     71 
     72 #ifdef IPKDB
     73 #include <ipkdb/ipkdb.h>
     74 #endif
     75 
     76 #include <machine/powerpc.h>
     77 
     78 #include <powerpc/trap.h>
     79 #include <powerpc/spr.h>
     80 #include <powerpc/pte.h>
     81 #include <powerpc/altivec.h>
     82 #include <powerpc/pcb.h>
     83 
     84 #include <powerpc/oea/bat.h>
     85 #include <powerpc/oea/cpufeat.h>
     86 #include <powerpc/oea/spr.h>
     87 #include <powerpc/oea/sr_601.h>
     88 
     89 char machine[] = MACHINE;		/* from <machine/param.h> */
     90 char machine_arch[] = MACHINE_ARCH;	/* from <machine/param.h> */
     91 
     92 struct vm_map *phys_map = NULL;
     93 
     94 /*
     95  * Global variables used here and there
     96  */
     97 static void trap0(void *);
     98 
     99 /* XXXSL: The battable is not initialized to non-zero for PPC_OEA64 and PPC_OEA64_BRIDGE */
    100 struct bat battable[BAT_VA2IDX(0xffffffff)+1];
    101 
    102 register_t iosrtable[16];	/* I/O segments, for kernel_pmap setup */
    103 #ifndef MSGBUFADDR
    104 paddr_t msgbuf_paddr;
    105 #endif
    106 
    107 extern int dsitrap_fix_dbat4[];
    108 extern int dsitrap_fix_dbat5[];
    109 extern int dsitrap_fix_dbat6[];
    110 extern int dsitrap_fix_dbat7[];
    111 
    112 void
    113 oea_init(void (*handler)(void))
    114 {
    115 	extern int trapcode[], trapsize[];
    116 	extern int sctrap[], scsize[];
    117 	extern int alitrap[], alisize[];
    118 	extern int dsitrap[], dsisize[];
    119 	extern int trapstart[], trapend[];
    120 #ifdef PPC_OEA601
    121 	extern int dsi601trap[], dsi601size[];
    122 #endif
    123 	extern int decrint[], decrsize[];
    124 	extern int tlbimiss[], tlbimsize[];
    125 	extern int tlbdlmiss[], tlbdlmsize[];
    126 	extern int tlbdsmiss[], tlbdsmsize[];
    127 #if defined(DDB) || defined(KGDB)
    128 	extern int ddblow[], ddbsize[];
    129 #endif
    130 #ifdef IPKDB
    131 	extern int ipkdblow[], ipkdbsize[];
    132 #endif
    133 #ifdef ALTIVEC
    134 	register_t msr;
    135 #endif
    136 	uintptr_t exc, exc_base;
    137 #if defined(ALTIVEC) || defined(PPC_OEA)
    138 	register_t scratch;
    139 #endif
    140 	unsigned int cpuvers;
    141 	size_t size;
    142 	struct cpu_info * const ci = &cpu_info[0];
    143 
    144 #ifdef PPC_HIGH_VEC
    145 	exc_base = EXC_HIGHVEC;
    146 #else
    147 	exc_base = 0;
    148 #endif
    149 	KASSERT(mfspr(SPR_SPRG0) == (uintptr_t)ci);
    150 
    151 #if defined (PPC_OEA64_BRIDGE) && defined (PPC_OEA)
    152 	if (oeacpufeat & OEACPU_64_BRIDGE)
    153 		pmap_setup64bridge();
    154 	else
    155 		pmap_setup32();
    156 #endif
    157 
    158 
    159 	cpuvers = mfpvr() >> 16;
    160 
    161 	/*
    162 	 * Initialize proc0 and current pcb and pmap pointers.
    163 	 */
    164 	(void) ci;
    165 	KASSERT(ci != NULL);
    166 	KASSERT(curcpu() == ci);
    167 	KASSERT(lwp0.l_cpu == ci);
    168 
    169 	curpcb = lwp_getpcb(&lwp0);
    170 	memset(curpcb, 0, sizeof(struct pcb));
    171 
    172 #ifdef ALTIVEC
    173 	/*
    174 	 * Initialize the vectors with NaNs
    175 	 */
    176 	for (scratch = 0; scratch < 32; scratch++) {
    177 		curpcb->pcb_vr.vreg[scratch][0] = 0x7FFFDEAD;
    178 		curpcb->pcb_vr.vreg[scratch][1] = 0x7FFFDEAD;
    179 		curpcb->pcb_vr.vreg[scratch][2] = 0x7FFFDEAD;
    180 		curpcb->pcb_vr.vreg[scratch][3] = 0x7FFFDEAD;
    181 	}
    182 #endif
    183 	curpm = curpcb->pcb_pm = pmap_kernel();
    184 
    185 	/*
    186 	 * Cause a PGM trap if we branch to 0.
    187 	 *
    188 	 * XXX GCC4.1 complains about memset on address zero, so
    189 	 * don't use the builtin.
    190 	 */
    191 #undef memset
    192 	memset(0, 0, 0x100);
    193 
    194 	/*
    195 	 * Set up trap vectors.  Don't assume vectors are on 0x100.
    196 	 */
    197 	for (exc = exc_base; exc <= exc_base + EXC_LAST; exc += 0x100) {
    198 		switch (exc - exc_base) {
    199 		default:
    200 			size = (size_t)trapsize;
    201 			memcpy((void *)exc, trapcode, size);
    202 			break;
    203 #if 0
    204 		case EXC_EXI:
    205 			/*
    206 			 * This one is (potentially) installed during autoconf
    207 			 */
    208 			break;
    209 #endif
    210 		case EXC_SC:
    211 			size = (size_t)scsize;
    212 			memcpy((void *)exc, sctrap, size);
    213 			break;
    214 		case EXC_ALI:
    215 			size = (size_t)alisize;
    216 			memcpy((void *)exc, alitrap, size);
    217 			break;
    218 		case EXC_DSI:
    219 #ifdef PPC_OEA601
    220 			if (cpuvers == MPC601) {
    221 				size = (size_t)dsi601size;
    222 				memcpy((void *)exc, dsi601trap, size);
    223 				break;
    224 			} else
    225 #endif /* PPC_OEA601 */
    226 			if (oeacpufeat & OEACPU_NOBAT) {
    227 				size = (size_t)alisize;
    228 				memcpy((void *)exc, alitrap, size);
    229 			} else {
    230 				size = (size_t)dsisize;
    231 				memcpy((void *)exc, dsitrap, size);
    232 			}
    233 			break;
    234 		case EXC_DECR:
    235 			size = (size_t)decrsize;
    236 			memcpy((void *)exc, decrint, size);
    237 			break;
    238 		case EXC_IMISS:
    239 			size = (size_t)tlbimsize;
    240 			memcpy((void *)exc, tlbimiss, size);
    241 			break;
    242 		case EXC_DLMISS:
    243 			size = (size_t)tlbdlmsize;
    244 			memcpy((void *)exc, tlbdlmiss, size);
    245 			break;
    246 		case EXC_DSMISS:
    247 			size = (size_t)tlbdsmsize;
    248 			memcpy((void *)exc, tlbdsmiss, size);
    249 			break;
    250 		case EXC_PERF:
    251 			size = (size_t)trapsize;
    252 			memcpy((void *)exc, trapcode, size);
    253 			memcpy((void *)(exc_base + EXC_VEC),  trapcode, size);
    254 			break;
    255 #if defined(DDB) || defined(IPKDB) || defined(KGDB)
    256 		case EXC_RUNMODETRC:
    257 #ifdef PPC_OEA601
    258 			if (cpuvers != MPC601) {
    259 #endif
    260 				size = (size_t)trapsize;
    261 				memcpy((void *)exc, trapcode, size);
    262 				break;
    263 #ifdef PPC_OEA601
    264 			}
    265 			/* FALLTHROUGH */
    266 #endif
    267 		case EXC_PGM:
    268 		case EXC_TRC:
    269 		case EXC_BPT:
    270 #if defined(DDB) || defined(KGDB)
    271 			size = (size_t)ddbsize;
    272 			memcpy((void *)exc, ddblow, size);
    273 #if defined(IPKDB)
    274 #error "cannot enable IPKDB with DDB or KGDB"
    275 #endif
    276 #else
    277 			size = (size_t)ipkdbsize;
    278 			memcpy((void *)exc, ipkdblow, size);
    279 #endif
    280 			break;
    281 #endif /* DDB || IPKDB || KGDB */
    282 		}
    283 #if 0
    284 		exc += roundup(size, 32);
    285 #endif
    286 	}
    287 
    288 	/*
    289 	 * Install a branch absolute to trap0 to force a panic.
    290 	 */
    291 	if ((uintptr_t)trap0 < 0x2000000) {
    292 		*(volatile uint32_t *) 0 = 0x7c6802a6;
    293 		*(volatile uint32_t *) 4 = 0x48000002 | (uintptr_t) trap0;
    294 	}
    295 
    296 	/*
    297 	 * Get the cache sizes because install_extint calls __syncicache.
    298 	 */
    299 	cpu_probe_cache();
    300 
    301 #define	MxSPR_MASK	0x7c1fffff
    302 #define	MFSPR_MQ	0x7c0002a6
    303 #define	MTSPR_MQ	0x7c0003a6
    304 #define	MTSPR_IBAT0L	0x7c1183a6
    305 #define	MTSPR_IBAT1L	0x7c1383a6
    306 #define	NOP		0x60000000
    307 #define	B		0x48000000
    308 #define	TLBSYNC		0x7c00046c
    309 #define	SYNC		0x7c0004ac
    310 #ifdef PPC_OEA64_BRIDGE
    311 #define	MFMSR_MASK	0xfc1fffff
    312 #define	MFMSR		0x7c0000a6
    313 #define	MTMSRD_MASK	0xfc1effff
    314 #define	MTMSRD		0x7c000164
    315 #define RLDICL_MASK	0xfc00001c
    316 #define RLDICL		0x78000000
    317 #define	RFID		0x4c000024
    318 #define	RFI		0x4c000064
    319 #endif
    320 
    321 #ifdef ALTIVEC
    322 #define	MFSPR_VRSAVE	0x7c0042a6
    323 #define	MTSPR_VRSAVE	0x7c0043a6
    324 
    325 	/*
    326 	 * Try to set the VEC bit in the MSR.  If it doesn't get set, we are
    327 	 * not on a AltiVec capable processor.
    328 	 */
    329 	__asm volatile (
    330 	    "mfmsr %0; oris %1,%0,%2@h; mtmsr %1; isync; "
    331 		"mfmsr %1; mtmsr %0; isync"
    332 	    :	"=r"(msr), "=r"(scratch)
    333 	    :	"J"(PSL_VEC));
    334 
    335 	/*
    336 	 * If we aren't on an AltiVec capable processor, we need to zap any of
    337 	 * the sequences we save/restore the VRSAVE SPR into NOPs.
    338 	 */
    339 	if (scratch & PSL_VEC) {
    340 		cpu_altivec = 1;
    341 	} else {
    342 		for (int *ip = trapstart; ip < trapend; ip++) {
    343 			if ((ip[0] & MxSPR_MASK) == MFSPR_VRSAVE) {
    344 				ip[0] = NOP;	/* mfspr */
    345 				ip[1] = NOP;	/* stw */
    346 			} else if ((ip[0] & MxSPR_MASK) == MTSPR_VRSAVE) {
    347 				ip[-1] = NOP;	/* lwz */
    348 				ip[0] = NOP;	/* mtspr */
    349 			}
    350 		}
    351 	}
    352 #endif
    353 
    354 	/* XXX It would seem like this code could be elided ifndef 601, but
    355 	 * doing so breaks my power3 machine.
    356 	 */
    357 	/*
    358 	 * If we aren't on a MPC601 processor, we need to zap any of the
    359 	 * sequences we save/restore the MQ SPR into NOPs, and skip over the
    360 	 * sequences where we zap/restore BAT registers on kernel exit/entry.
    361 	 */
    362 	if (cpuvers != MPC601) {
    363 		for (int *ip = trapstart; ip < trapend; ip++) {
    364 			if ((ip[0] & MxSPR_MASK) == MFSPR_MQ) {
    365 				ip[0] = NOP;	/* mfspr */
    366 				ip[1] = NOP;	/* stw */
    367 			} else if ((ip[0] & MxSPR_MASK) == MTSPR_MQ) {
    368 				ip[-1] = NOP;	/* lwz */
    369 				ip[0] = NOP;	/* mtspr */
    370 			} else if ((ip[0] & MxSPR_MASK) == MTSPR_IBAT0L) {
    371 				if ((ip[1] & MxSPR_MASK) == MTSPR_IBAT1L)
    372 					ip[-1] = B | 0x14;	/* li */
    373 				else
    374 					ip[-4] = B | 0x24;	/* lis */
    375 			}
    376 		}
    377 	}
    378 
    379 #ifdef PPC_OEA64_BRIDGE
    380 	if ((oeacpufeat & OEACPU_64_BRIDGE) == 0) {
    381 		for (int *ip = (int *)exc_base;
    382 		     (uintptr_t)ip <= exc_base + EXC_LAST;
    383 		     ip++) {
    384 			if ((ip[0] & MFMSR_MASK) == MFMSR
    385 			    && (ip[1] & RLDICL_MASK) == RLDICL
    386 			    && (ip[2] & MTMSRD_MASK) == MTMSRD) {
    387 				*ip++ = NOP;
    388 				*ip++ = NOP;
    389 				ip[0] = NOP;
    390 			} else if (*ip == RFID) {
    391 				*ip = RFI;
    392 			}
    393 		}
    394 
    395 		/*
    396 		 * Now replace each rfid instruction with a rfi instruction.
    397 		 */
    398 		for (int *ip = trapstart; ip < trapend; ip++) {
    399 			if ((ip[0] & MFMSR_MASK) == MFMSR
    400 			    && (ip[1] & RLDICL_MASK) == RLDICL
    401 			    && (ip[2] & MTMSRD_MASK) == MTMSRD) {
    402 				*ip++ = NOP;
    403 				*ip++ = NOP;
    404 				ip[0] = NOP;
    405 			} else if (*ip == RFID) {
    406 				*ip = RFI;
    407 			}
    408 		}
    409 	}
    410 #endif /* PPC_OEA64_BRIDGE */
    411 
    412 	/*
    413 	 * Sync the changed instructions.
    414 	 */
    415 	__syncicache((void *) trapstart,
    416 	    (uintptr_t) trapend - (uintptr_t) trapstart);
    417 	__syncicache(dsitrap_fix_dbat4, 16);
    418 	__syncicache(dsitrap_fix_dbat7, 8);
    419 #ifdef PPC_OEA601
    420 
    421 	/*
    422 	 * If we are on a MPC601 processor, we need to zap any tlbsync
    423 	 * instructions into sync.  This differs from the above in
    424 	 * examing all kernel text, as opposed to just the exception handling.
    425 	 * We sync the icache on every instruction found since there are
    426 	 * only very few of them.
    427 	 */
    428 	if (cpuvers == MPC601) {
    429 		extern int kernel_text[], etext[];
    430 		int *ip;
    431 
    432 		for (ip = kernel_text; ip < etext; ip++) {
    433 			if (*ip == TLBSYNC) {
    434 				*ip = SYNC;
    435 				__syncicache(ip, sizeof(*ip));
    436 			}
    437 		}
    438 	}
    439 #endif /* PPC_OEA601 */
    440 
    441         /*
    442 	 * Configure a PSL user mask matching this processor.
    443 	 * Don't allow to set PSL_FP/PSL_VEC, since that will affect PCU.
    444  	 */
    445 	cpu_psluserset = PSL_EE | PSL_PR | PSL_ME | PSL_IR | PSL_DR | PSL_RI;
    446 	cpu_pslusermod = PSL_FE0 | PSL_FE1 | PSL_LE | PSL_SE | PSL_BE;
    447 #ifdef PPC_OEA601
    448 	if (cpuvers == MPC601) {
    449 		cpu_psluserset &= PSL_601_MASK;
    450 		cpu_pslusermod &= PSL_601_MASK;
    451 	}
    452 #endif
    453 #ifdef PPC_HIGH_VEC
    454 	cpu_psluserset |= PSL_IP;	/* XXX ok? */
    455 #endif
    456 
    457 	/*
    458 	 * external interrupt handler install
    459 	 */
    460 	if (handler)
    461 		oea_install_extint(handler);
    462 
    463 	__syncicache((void *)exc_base, EXC_LAST + 0x100);
    464 
    465 	/*
    466 	 * Now enable translation (and machine checks/recoverable interrupts).
    467 	 */
    468 #ifdef PPC_OEA
    469 	__asm volatile ("sync; mfmsr %0; ori %0,%0,%1; mtmsr %0; isync"
    470 	    : "=r"(scratch)
    471 	    : "K"(PSL_IR|PSL_DR|PSL_ME|PSL_RI));
    472 #endif
    473 
    474 	/*
    475 	 * Let's take all the indirect calls via our stubs and patch
    476 	 * them to be direct calls.
    477 	 */
    478 	cpu_fixup_stubs();
    479 
    480 	KASSERT(curcpu() == ci);
    481 }
    482 
    483 #ifdef PPC_OEA601
    484 void
    485 mpc601_ioseg_add(paddr_t pa, register_t len)
    486 {
    487 	const u_int i = pa >> ADDR_SR_SHFT;
    488 
    489 	if (len != BAT_BL_256M)
    490 		panic("mpc601_ioseg_add: len != 256M");
    491 
    492 	/*
    493 	 * Translate into an I/O segment, load it, and stash away for use
    494 	 * in pmap_bootstrap().
    495 	 */
    496 	iosrtable[i] = SR601(SR601_Ks, SR601_BUID_MEMFORCED, 0, i);
    497 
    498 	/*
    499 	 * XXX Setting segment register 0xf on my powermac 7200
    500 	 * wedges machine so set later in pmap.c
    501 	 */
    502 	/*
    503 	__asm volatile ("mtsrin %0,%1"
    504 	    ::	"r"(iosrtable[i]),
    505 		"r"(pa));
    506 	*/
    507 }
    508 #endif /* PPC_OEA601 */
    509 
    510 #if defined (PPC_OEA) || defined (PPC_OEA64_BRIDGE)
    511 #define	DBAT_SET(n, batl, batu)				\
    512 	do {						\
    513 		mtspr(SPR_DBAT##n##L, (batl));		\
    514 		mtspr(SPR_DBAT##n##U, (batu));		\
    515 	} while (/*CONSTCOND*/ 0)
    516 #define	DBAT_RESET(n)	DBAT_SET(n, 0, 0)
    517 #define	DBATU_GET(n)	mfspr(SPR_DBAT##n##U)
    518 #define	IBAT_SET(n, batl, batu)				\
    519 	do {						\
    520 		mtspr(SPR_IBAT##n##L, (batl));		\
    521 		mtspr(SPR_IBAT##n##U, (batu));		\
    522 	} while (/*CONSTCOND*/ 0)
    523 #define	IBAT_RESET(n)	IBAT_SET(n, 0, 0)
    524 
    525 void
    526 oea_iobat_add(paddr_t pa, register_t len)
    527 {
    528 	static int z = 1;
    529 	const u_int n = BAT_BL_TO_SIZE(len) / BAT_BL_TO_SIZE(BAT_BL_8M);
    530 	const u_int i = BAT_VA2IDX(pa) & -n; /* in case pa was in the middle */
    531 	const int after_bat3 = (oeacpufeat & OEACPU_HIGHBAT) ? 4 : 8;
    532 
    533 	KASSERT(len >= BAT_BL_8M);
    534 
    535 	/*
    536 	 * If the caller wanted a bigger BAT than the hardware supports,
    537 	 * split it into smaller BATs.
    538 	 */
    539 	if (len > BAT_BL_256M && (oeacpufeat & OEACPU_XBSEN) == 0) {
    540 		u_int xn = BAT_BL_TO_SIZE(len) >> 28;
    541 		while (xn-- > 0) {
    542 			oea_iobat_add(pa, BAT_BL_256M);
    543 			pa += 0x10000000;
    544 		}
    545 		return;
    546 	}
    547 
    548 	const register_t batl = BATL(pa, BAT_I|BAT_G, BAT_PP_RW);
    549 	const register_t batu = BATU(pa, len, BAT_Vs);
    550 
    551 	for (u_int j = 0; j < n; j++) {
    552 		battable[i + j].batl = batl;
    553 		battable[i + j].batu = batu;
    554 	}
    555 
    556 	/*
    557 	 * Let's start loading the BAT registers.
    558 	 */
    559 	switch (z) {
    560 	case 1:
    561 		DBAT_SET(1, batl, batu);
    562 		z = 2;
    563 		break;
    564 	case 2:
    565 		DBAT_SET(2, batl, batu);
    566 		z = 3;
    567 		break;
    568 	case 3:
    569 		DBAT_SET(3, batl, batu);
    570 		z = after_bat3;			/* no highbat, skip to end */
    571 		break;
    572 	case 4:
    573 		DBAT_SET(4, batl, batu);
    574 		z = 5;
    575 		break;
    576 	case 5:
    577 		DBAT_SET(5, batl, batu);
    578 		z = 6;
    579 		break;
    580 	case 6:
    581 		DBAT_SET(6, batl, batu);
    582 		z = 7;
    583 		break;
    584 	case 7:
    585 		DBAT_SET(7, batl, batu);
    586 		z = 8;
    587 		break;
    588 	default:
    589 		break;
    590 	}
    591 }
    592 
    593 void
    594 oea_iobat_remove(paddr_t pa)
    595 {
    596 	const u_int i = BAT_VA2IDX(pa);
    597 
    598 	if (!BAT_VA_MATCH_P(battable[i].batu, pa) ||
    599 	    !BAT_VALID_P(battable[i].batu, PSL_PR))
    600 		return;
    601 	const int n =
    602 	    __SHIFTOUT(battable[i].batu, (BAT_XBL|BAT_BL) & ~BAT_BL_8M) + 1;
    603 	KASSERT((n & (n-1)) == 0);	/* power of 2 */
    604 	KASSERT((i & (n-1)) == 0);	/* multiple of n */
    605 
    606 	memset(&battable[i], 0, n*sizeof(battable[0]));
    607 
    608 	const int maxbat = oeacpufeat & OEACPU_HIGHBAT ? 8 : 4;
    609 	for (u_int k = 1 ; k < maxbat; k++) {
    610 		register_t batu;
    611 		switch (k) {
    612 		case 1:
    613 			batu = DBATU_GET(1);
    614 			if (BAT_VA_MATCH_P(batu, pa) &&
    615 			    BAT_VALID_P(batu, PSL_PR))
    616 				DBAT_RESET(1);
    617 			break;
    618 		case 2:
    619 			batu = DBATU_GET(2);
    620 			if (BAT_VA_MATCH_P(batu, pa) &&
    621 			    BAT_VALID_P(batu, PSL_PR))
    622 				DBAT_RESET(2);
    623 			break;
    624 		case 3:
    625 			batu = DBATU_GET(3);
    626 			if (BAT_VA_MATCH_P(batu, pa) &&
    627 			    BAT_VALID_P(batu, PSL_PR))
    628 				DBAT_RESET(3);
    629 			break;
    630 		case 4:
    631 			batu = DBATU_GET(4);
    632 			if (BAT_VA_MATCH_P(batu, pa) &&
    633 			    BAT_VALID_P(batu, PSL_PR))
    634 				DBAT_RESET(4);
    635 			break;
    636 		case 5:
    637 			batu = DBATU_GET(5);
    638 			if (BAT_VA_MATCH_P(batu, pa) &&
    639 			    BAT_VALID_P(batu, PSL_PR))
    640 				DBAT_RESET(5);
    641 			break;
    642 		case 6:
    643 			batu = DBATU_GET(6);
    644 			if (BAT_VA_MATCH_P(batu, pa) &&
    645 			    BAT_VALID_P(batu, PSL_PR))
    646 				DBAT_RESET(6);
    647 			break;
    648 		case 7:
    649 			batu = DBATU_GET(7);
    650 			if (BAT_VA_MATCH_P(batu, pa) &&
    651 			    BAT_VALID_P(batu, PSL_PR))
    652 				DBAT_RESET(7);
    653 			break;
    654 		default:
    655 			break;
    656 		}
    657 	}
    658 }
    659 
    660 void
    661 oea_batinit(paddr_t pa, ...)
    662 {
    663 	struct mem_region *allmem, *availmem, *mp;
    664 	register_t msr = mfmsr();
    665 	va_list ap;
    666 #ifdef PPC_OEA601
    667 	unsigned int cpuvers;
    668 
    669 	cpuvers = mfpvr() >> 16;
    670 #endif /* PPC_OEA601 */
    671 
    672 	/*
    673 	 * we need to call this before zapping BATs so OF calls work
    674 	 */
    675 	mem_regions(&allmem, &availmem);
    676 
    677 	/*
    678 	 * Initialize BAT registers to unmapped to not generate
    679 	 * overlapping mappings below.
    680 	 *
    681 	 * The 601's implementation differs in the Valid bit being situated
    682 	 * in the lower BAT register, and in being a unified BAT only whose
    683 	 * four entries are accessed through the IBAT[0-3] SPRs.
    684 	 *
    685 	 * Also, while the 601 does distinguish between supervisor/user
    686 	 * protection keys, it does _not_ distinguish between validity in
    687 	 * supervisor/user mode.
    688 	 */
    689 	if ((msr & (PSL_IR|PSL_DR)) == 0) {
    690 #ifdef PPC_OEA601
    691 		if (cpuvers == MPC601) {
    692 			__asm volatile ("mtibatl 0,%0" :: "r"(0));
    693 			__asm volatile ("mtibatl 1,%0" :: "r"(0));
    694 			__asm volatile ("mtibatl 2,%0" :: "r"(0));
    695 			__asm volatile ("mtibatl 3,%0" :: "r"(0));
    696 		} else
    697 #endif /* PPC_OEA601 */
    698 		{
    699 			DBAT_RESET(0); IBAT_RESET(0);
    700 			DBAT_RESET(1); IBAT_RESET(1);
    701 			DBAT_RESET(2); IBAT_RESET(2);
    702 			DBAT_RESET(3); IBAT_RESET(3);
    703 			if (oeacpufeat & OEACPU_HIGHBAT) {
    704 				DBAT_RESET(4); IBAT_RESET(4);
    705 				DBAT_RESET(5); IBAT_RESET(5);
    706 				DBAT_RESET(6); IBAT_RESET(6);
    707 				DBAT_RESET(7); IBAT_RESET(7);
    708 
    709 				/*
    710 				 * Change the first instruction to branch to
    711 				 * dsitrap_fix_dbat6
    712 				 */
    713 				dsitrap_fix_dbat4[0] &= ~0xfffc;
    714 				dsitrap_fix_dbat4[0]
    715 				    += (uintptr_t)dsitrap_fix_dbat6
    716 				     - (uintptr_t)&dsitrap_fix_dbat4[0];
    717 
    718 				/*
    719 				 * Change the second instruction to branch to
    720 				 * dsitrap_fix_dbat5 if bit 30 (aka bit 1) is
    721 				 * true.
    722 				 */
    723 				dsitrap_fix_dbat4[1] = 0x419e0000
    724 				    + (uintptr_t)dsitrap_fix_dbat5
    725 				    - (uintptr_t)&dsitrap_fix_dbat4[1];
    726 
    727 				/*
    728 				 * Change it to load dbat4 instead of dbat2
    729 				 */
    730 				dsitrap_fix_dbat4[2] = 0x7fd88ba6;
    731 				dsitrap_fix_dbat4[3] = 0x7ff98ba6;
    732 
    733 				/*
    734 				 * Change it to load dbat7 instead of dbat3
    735 				 */
    736 				dsitrap_fix_dbat7[0] = 0x7fde8ba6;
    737 				dsitrap_fix_dbat7[1] = 0x7fff8ba6;
    738 			}
    739 		}
    740 	}
    741 
    742 	/*
    743 	 * Set up BAT to map physical memory
    744 	 */
    745 #ifdef PPC_OEA601
    746 	if (cpuvers == MPC601) {
    747 		int i;
    748 
    749 		/*
    750 		 * Set up battable to map the lowest 256 MB area.
    751 		 * Map the lowest 32 MB area via BAT[0-3];
    752 		 * BAT[01] are fixed, BAT[23] are floating.
    753 		 */
    754 		for (i = 0; i < 32; i++) {
    755 			battable[i].batl = BATL601(i << 23,
    756 			   BAT601_BSM_8M, BAT601_V);
    757 			battable[i].batu = BATU601(i << 23,
    758 			    BAT601_M, BAT601_Ku, BAT601_PP_NONE);
    759 		}
    760 		__asm volatile ("mtibatu 0,%1; mtibatl 0,%0"
    761 		    :: "r"(battable[0x00000000 >> 23].batl),
    762 		       "r"(battable[0x00000000 >> 23].batu));
    763 		__asm volatile ("mtibatu 1,%1; mtibatl 1,%0"
    764 		    :: "r"(battable[0x00800000 >> 23].batl),
    765 		       "r"(battable[0x00800000 >> 23].batu));
    766 		__asm volatile ("mtibatu 2,%1; mtibatl 2,%0"
    767 		    :: "r"(battable[0x01000000 >> 23].batl),
    768 		       "r"(battable[0x01000000 >> 23].batu));
    769 		__asm volatile ("mtibatu 3,%1; mtibatl 3,%0"
    770 		    :: "r"(battable[0x01800000 >> 23].batl),
    771 		       "r"(battable[0x01800000 >> 23].batu));
    772 	}
    773 #endif /* PPC_OEA601 */
    774 
    775 	/*
    776 	 * Now setup other fixed bat registers
    777 	 *
    778 	 * Note that we still run in real mode, and the BAT
    779 	 * registers were cleared above.
    780 	 */
    781 
    782 	va_start(ap, pa);
    783 
    784 	/*
    785 	 * Add any I/O BATs specificed;
    786 	 * use I/O segments on the BAT-starved 601.
    787 	 */
    788 #ifdef PPC_OEA601
    789 	if (cpuvers == MPC601) {
    790 		while (pa != 0) {
    791 			register_t len = va_arg(ap, register_t);
    792 			mpc601_ioseg_add(pa, len);
    793 			pa = va_arg(ap, paddr_t);
    794 		}
    795 	} else
    796 #endif
    797 	{
    798 		while (pa != 0) {
    799 			register_t len = va_arg(ap, register_t);
    800 			oea_iobat_add(pa, len);
    801 			pa = va_arg(ap, paddr_t);
    802 		}
    803 	}
    804 
    805 	va_end(ap);
    806 
    807 	/*
    808 	 * Set up battable to map all RAM regions.
    809 	 */
    810 #ifdef PPC_OEA601
    811 	if (cpuvers == MPC601) {
    812 		for (mp = allmem; mp->size; mp++) {
    813 			paddr_t paddr = mp->start & 0xff800000;
    814 			paddr_t end = mp->start + mp->size;
    815 
    816 			do {
    817 				u_int ix = paddr >> 23;
    818 
    819 				battable[ix].batl =
    820 				    BATL601(paddr, BAT601_BSM_8M, BAT601_V);
    821 				battable[ix].batu =
    822 				    BATU601(paddr, BAT601_M, BAT601_Ku, BAT601_PP_NONE);
    823 				paddr += (1 << 23);
    824 			} while (paddr < end);
    825 		}
    826 	} else
    827 #endif
    828 	{
    829 		const register_t bat_inc = BAT_IDX2VA(1);
    830 		for (mp = allmem; mp->size; mp++) {
    831 			paddr_t paddr = mp->start & -bat_inc;
    832 			paddr_t end = roundup2(mp->start + mp->size, bat_inc);
    833 
    834 			/*
    835 			 * If the next entries are adjacent, merge them
    836 			 * into this one
    837 			 */
    838 			while (mp[1].size && end == (mp[1].start & -bat_inc)) {
    839 				mp++;
    840 				end = roundup2(mp->start + mp->size, bat_inc);
    841 			}
    842 
    843 			while (paddr < end) {
    844 				register_t bl = (oeacpufeat & OEACPU_XBSEN
    845 				    ? BAT_BL_2G
    846 				    : BAT_BL_256M);
    847 				psize_t size = BAT_BL_TO_SIZE(bl);
    848 				u_int n = BAT_VA2IDX(size);
    849 				u_int i = BAT_VA2IDX(paddr);
    850 
    851 				while ((paddr & (size - 1))
    852 				    || paddr + size > end) {
    853 					size >>= 1;
    854 					bl = (bl >> 1) & (BAT_XBL|BAT_BL);
    855 					n >>= 1;
    856 				}
    857 
    858 				KASSERT(size >= bat_inc);
    859 				KASSERT(n >= 1);
    860 				KASSERT(bl >= BAT_BL_8M);
    861 
    862 				register_t batl = BATL(paddr, BAT_M, BAT_PP_RW);
    863 				register_t batu = BATU(paddr, bl, BAT_Vs);
    864 
    865 				for (; n-- > 0; i++) {
    866 					battable[i].batl = batl;
    867 					battable[i].batu = batu;
    868 				}
    869 				paddr += size;
    870 			}
    871 		}
    872 		/*
    873 		 * Set up BAT0 to only map the lowest area.
    874 		 */
    875 		__asm volatile ("mtibatl 0,%0; mtibatu 0,%1;"
    876 				  "mtdbatl 0,%0; mtdbatu 0,%1;"
    877 		    ::	"r"(battable[0].batl), "r"(battable[0].batu));
    878 	}
    879 }
    880 #endif /* PPC_OEA || PPC_OEA64_BRIDGE */
    881 
    882 void
    883 oea_install_extint(void (*handler)(void))
    884 {
    885 	extern int extint[], extsize[];
    886 	extern int extint_call[];
    887 	uintptr_t offset = (uintptr_t)handler - (uintptr_t)extint_call;
    888 #ifdef PPC_HIGH_VEC
    889 	const uintptr_t exc_exi_base = EXC_HIGHVEC + EXC_EXI;
    890 #else
    891 	const uintptr_t exc_exi_base = EXC_EXI;
    892 #endif
    893 	int omsr, msr;
    894 
    895 #ifdef	DIAGNOSTIC
    896 	if (offset > 0x1ffffff)
    897 		panic("install_extint: %p too far away (%#lx)", handler,
    898 		    (unsigned long) offset);
    899 #endif
    900 	__asm volatile ("mfmsr %0; andi. %1,%0,%2; mtmsr %1"
    901 	    :	"=r" (omsr), "=r" (msr)
    902 	    :	"K" ((u_short)~PSL_EE));
    903 	extint_call[0] = (extint_call[0] & 0xfc000003) | offset;
    904 	__syncicache((void *)extint_call, sizeof extint_call[0]);
    905 	memcpy((void *)exc_exi_base, extint, (size_t)extsize);
    906 #ifdef PPC_OEA64_BRIDGE
    907 	if ((oeacpufeat & OEACPU_64_BRIDGE) == 0) {
    908 		for (int *ip = (int *)exc_exi_base;
    909 		     (uintptr_t)ip <= exc_exi_base + (size_t)extsize;
    910 		     ip++) {
    911 			if ((ip[0] & MFMSR_MASK) == MFMSR
    912 			    && (ip[1] & RLDICL_MASK) == RLDICL
    913 			    && (ip[2] & MTMSRD_MASK) == MTMSRD) {
    914 				*ip++ = NOP;
    915 				*ip++ = NOP;
    916 				ip[0] = NOP;
    917 			} else if (*ip == RFID) {
    918 				*ip = RFI;
    919 			}
    920 		}
    921 	}
    922 #endif
    923 	__syncicache((void *)exc_exi_base, (size_t)extsize);
    924 
    925 	__asm volatile ("mtmsr %0" :: "r"(omsr));
    926 }
    927 
    928 /*
    929  * Machine dependent startup code.
    930  */
    931 void
    932 oea_startup(const char *model)
    933 {
    934 	uintptr_t sz;
    935 	void *v;
    936 	vaddr_t minaddr, maxaddr;
    937 	char pbuf[9], mstr[128];
    938 
    939 	KASSERT(curcpu() != NULL);
    940 	KASSERT(lwp0.l_cpu != NULL);
    941 	KASSERT(curcpu()->ci_idepth == -1);
    942 
    943 	sz = round_page(MSGBUFSIZE);
    944 #ifdef MSGBUFADDR
    945 	v = (void *) MSGBUFADDR;
    946 #else
    947 	/*
    948 	 * If the msgbuf is not in segment 0, allocate KVA for it and access
    949 	 * it via mapped pages.  [This prevents unneeded BAT switches.]
    950 	 */
    951 	v = (void *) msgbuf_paddr;
    952 	if (msgbuf_paddr + sz > SEGMENT_LENGTH) {
    953 		u_int i;
    954 
    955 		minaddr = 0;
    956 		if (uvm_map(kernel_map, &minaddr, sz,
    957 				NULL, UVM_UNKNOWN_OFFSET, 0,
    958 				UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE,
    959 				    UVM_INH_NONE, UVM_ADV_NORMAL, 0)) != 0)
    960 			panic("startup: cannot allocate VM for msgbuf");
    961 		v = (void *)minaddr;
    962 		for (i = 0; i < sz; i += PAGE_SIZE) {
    963 			pmap_kenter_pa(minaddr + i, msgbuf_paddr + i,
    964 			    VM_PROT_READ|VM_PROT_WRITE, 0);
    965 		}
    966 		pmap_update(pmap_kernel());
    967 	}
    968 #endif
    969 	initmsgbuf(v, sz);
    970 
    971 	printf("%s%s", copyright, version);
    972 	if (model != NULL)
    973 		printf("Model: %s\n", model);
    974 	cpu_identify(mstr, sizeof(mstr));
    975 	cpu_setmodel("%s", mstr);
    976 
    977 	format_bytes(pbuf, sizeof(pbuf), ctob((u_int)physmem));
    978 	printf("total memory = %s\n", pbuf);
    979 
    980 	/*
    981 	 * Allocate away the pages that map to 0xDEA[CDE]xxxx.  Do this after
    982 	 * the bufpages are allocated in case they overlap since it's not
    983 	 * fatal if we can't allocate these.
    984 	 */
    985 	if (KERNEL_SR == 13 || KERNEL2_SR == 14) {
    986 		int error;
    987 		minaddr = 0xDEAC0000;
    988 		error = uvm_map(kernel_map, &minaddr, 0x30000,
    989 		    NULL, UVM_UNKNOWN_OFFSET, 0,
    990 		    UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
    991 				UVM_ADV_NORMAL, UVM_FLAG_FIXED));
    992 		if (error != 0 || minaddr != 0xDEAC0000)
    993 			printf("oea_startup: failed to allocate DEAD "
    994 			    "ZONE: error=%d\n", error);
    995 	}
    996 
    997 	minaddr = 0;
    998 
    999 	/*
   1000 	 * Allocate a submap for physio
   1001 	 */
   1002 	phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
   1003 				 VM_PHYS_SIZE, 0, false, NULL);
   1004 
   1005 	format_bytes(pbuf, sizeof(pbuf), ptoa(uvmexp.free));
   1006 	printf("avail memory = %s\n", pbuf);
   1007 
   1008 #ifdef MULTIPROCESSOR
   1009 	kcpuset_create(&cpuset_info.cpus_running, true);
   1010 	kcpuset_create(&cpuset_info.cpus_hatched, true);
   1011 	kcpuset_create(&cpuset_info.cpus_paused, true);
   1012 	kcpuset_create(&cpuset_info.cpus_resumed, true);
   1013 	kcpuset_create(&cpuset_info.cpus_halted, true);
   1014 
   1015 	kcpuset_set(cpuset_info.cpus_running, cpu_number());
   1016 #endif
   1017 }
   1018 
   1019 /*
   1020  * Crash dump handling.
   1021  */
   1022 
   1023 void
   1024 oea_dumpsys(void)
   1025 {
   1026 	printf("dumpsys: TBD\n");
   1027 }
   1028 
   1029 /*
   1030  * Convert kernel VA to physical address
   1031  */
   1032 paddr_t
   1033 kvtop(void *addr)
   1034 {
   1035 	vaddr_t va;
   1036 	paddr_t pa;
   1037 	uintptr_t off;
   1038 	extern char end[];
   1039 
   1040 	if (addr < (void *)end)
   1041 		return (paddr_t)addr;
   1042 
   1043 	va = trunc_page((vaddr_t)addr);
   1044 	off = (uintptr_t)addr - va;
   1045 
   1046 	if (pmap_extract(pmap_kernel(), va, &pa) == false) {
   1047 		/*printf("kvtop: zero page frame (va=0x%x)\n", addr);*/
   1048 		return (paddr_t)addr;
   1049 	}
   1050 
   1051 	return(pa + off);
   1052 }
   1053 
   1054 /*
   1055  * Allocate vm space and mapin the I/O address
   1056  */
   1057 void *
   1058 mapiodev(paddr_t pa, psize_t len, bool prefetchable)
   1059 {
   1060 	paddr_t faddr;
   1061 	vaddr_t taddr, va;
   1062 	int off;
   1063 
   1064 	faddr = trunc_page(pa);
   1065 	off = pa - faddr;
   1066 	len = round_page(off + len);
   1067 	va = taddr = uvm_km_alloc(kernel_map, len, 0, UVM_KMF_VAONLY);
   1068 
   1069 	if (va == 0)
   1070 		return NULL;
   1071 
   1072 	for (; len > 0; len -= PAGE_SIZE) {
   1073 		pmap_kenter_pa(taddr, faddr, VM_PROT_READ | VM_PROT_WRITE,
   1074 		    (prefetchable ? PMAP_MD_PREFETCHABLE : PMAP_NOCACHE));
   1075 		faddr += PAGE_SIZE;
   1076 		taddr += PAGE_SIZE;
   1077 	}
   1078 	pmap_update(pmap_kernel());
   1079 	return (void *)(va + off);
   1080 }
   1081 
   1082 void
   1083 unmapiodev(vaddr_t va, vsize_t len)
   1084 {
   1085 	paddr_t faddr;
   1086 
   1087 	if (! va)
   1088 		return;
   1089 
   1090 	faddr = trunc_page(va);
   1091 	len = round_page(va - faddr + len);
   1092 
   1093 	pmap_kremove(faddr, len);
   1094 	pmap_update(pmap_kernel());
   1095 	uvm_km_free(kernel_map, faddr, len, UVM_KMF_VAONLY);
   1096 }
   1097 
   1098 void
   1099 trap0(void *lr)
   1100 {
   1101 	panic("call to null-ptr from %p", lr);
   1102 }
   1103