GENERIC revision 1.123.2.4
1 # $NetBSD: GENERIC,v 1.123.2.4 2006/09/22 05:56:54 riz Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/prep/conf/std.prep" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.123.2.4 $" 26 27 maxusers 32 28 29 # Platform support 30 31 options OPENPIC # OpenPIC support (7043-140) 32 33 # Standard system options 34 35 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 36 options NTP # NTP phase/frequency locked loop 37 38 options KTRACE # system call tracing via ktrace(1) 39 #options SYSTRACE # system call vetting via systrace(1) 40 41 options SYSVMSG # System V-like message queues 42 options SYSVSEM # System V-like semaphores 43 #options SEMMNI=10 # number of semaphore identifiers 44 #options SEMMNS=60 # number of semaphores in system 45 #options SEMUME=10 # max number of undo entries per process 46 #options SEMMNU=30 # number of undo structures in system 47 options SYSVSHM # System V-like memory sharing 48 #options SHMMAXPGS=1024 # 1024 pages is the default 49 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 50 51 options LKM # loadable kernel modules 52 53 options USERCONF # userconf(4) support 54 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 55 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 56 57 # Enable experimental buffer queue strategy for better responsiveness under 58 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 59 #options BUFQ_READPRIO 60 #options BUFQ_PRIOCSCAN 61 62 # Diagnostic/debugging support options 63 #options DIAGNOSTIC # cheap kernel consistency checks 64 #options DEBUG # expensive debugging checks/support 65 #options KMEMSTATS # kernel memory statistics (vmstat -m) 66 options DDB # in-kernel debugger 67 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 68 #makeoptions DEBUG="-g" 69 70 # Compatibility options 71 options COMPAT_13 # NetBSD 1.3, 72 options COMPAT_14 # NetBSD 1.4, 73 options COMPAT_15 # NetBSD 1.5, 74 options COMPAT_16 # NetBSD 1.6, 75 options COMPAT_20 # NetBSD 2.0, 76 options COMPAT_30 # NetBSD 3.0 compatibility. 77 options COMPAT_43 # and 4.3BSD 78 #options COMPAT_LINUX # Linux binary compatibility 79 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 80 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 81 82 # File systems 83 file-system FFS # UFS 84 file-system EXT2FS # second extended file system (linux) 85 #file-system LFS # log-structured file system 86 file-system MFS # memory file system 87 file-system NFS # Network File System client 88 #file-system NTFS # Windows/NT file system (experimental) 89 file-system CD9660 # ISO 9660 + Rock Ridge file system 90 file-system MSDOSFS # MS-DOS file system 91 #file-system FDESC # /dev/fd 92 file-system KERNFS # /kern 93 file-system NULLFS # loopback file system 94 #file-system OVERLAY # overlay file system 95 #file-system PORTAL # portal filesystem (still experimental) 96 file-system PROCFS # /proc 97 #file-system UMAPFS # NULLFS + uid and gid remapping 98 file-system UNION # union file system 99 #file-system CODA # Coda File System; also needs vcoda (below) 100 file-system PTYFS # /dev/pts/N support 101 #file-system TMPFS # experimental - Efficient memory file-system 102 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 103 104 # File system options 105 options QUOTA # UFS quotas 106 #options FFS_EI # FFS Endian Independant support 107 options SOFTDEP # FFS soft updates support. 108 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 109 options NFSSERVER # Network File System server 110 #options FFS_NO_SNAPSHOT # No FFS snapshot support 111 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 112 # immutable) behave as system flags. 113 114 # Networking options 115 #options GATEWAY # packet forwarding 116 options INET # IP + ICMP + TCP + UDP 117 options INET6 # IPv6 118 #options IPSEC # IP security 119 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 120 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 121 #options IPSEC_DEBUG # debug for IP security 122 #options MROUTING # IP multicast routing 123 #options PIM # Protocol Independent Multicast 124 #options NETATALK # AppleTalk networking protocols 125 options PPP_BSDCOMP # BSD-Compress compression support for PPP 126 options PPP_DEFLATE # Deflate compression support for PPP 127 options PPP_FILTER # Active filter support for PPP (requires bpf) 128 options PFIL_HOOKS # pfil(9) packet filter hooks 129 options IPFILTER_LOG # ipmon(8) log support 130 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 131 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 132 133 #options ALTQ # Manipulate network interfaces' output queues 134 #options ALTQ_BLUE # Stochastic Fair Blue 135 #options ALTQ_CBQ # Class-Based Queueing 136 #options ALTQ_CDNR # Diffserv Traffic Conditioner 137 #options ALTQ_FIFOQ # First-In First-Out Queue 138 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 139 #options ALTQ_HFSC # Hierarchical Fair Service Curve 140 #options ALTQ_LOCALQ # Local queueing discipline 141 #options ALTQ_PRIQ # Priority Queueing 142 #options ALTQ_RED # Random Early Detection 143 #options ALTQ_RIO # RED with IN/OUT 144 #options ALTQ_WFQ # Weighted Fair Queueing 145 146 # These options enable verbose messages for several subsystems. 147 # Warning, these may compile large string tables into the kernel! 148 #options MIIVERBOSE # verbose PHY autoconfig messages 149 options PCIVERBOSE # verbose PCI device autoconfig messages 150 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 151 #options PCMCIAVERBOSE # verbose PCMCIA configuration messages 152 options SCSIVERBOSE # human readable SCSI error messages 153 #options USBVERBOSE # verbose USB device autoconfig messages 154 #options RESIDUAL_DATA_DUMP # verbosely dump residual data 155 #options NVRAM_DUMP # verbosely dump contents of nvram. 156 # Warning: output may not be ascii! 157 158 #options NFS_BOOT_BOOTP 159 options NFS_BOOT_BOOTPARAM 160 options NFS_BOOT_DHCP 161 162 # 163 # wscons options 164 # 165 # builtin terminal emulations 166 options WSEMUL_VT100 # VT100 / VT220 emulation 167 # different kernel output - see dev/wscons/wsdisplayvar.h 168 options WS_KERNEL_FG=WSCOL_GREEN 169 #options WS_KERNEL_BG=WSCOL_BLACK 170 # see dev/pckbport/wskbdmap_mfii.c for implemented layouts 171 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 172 # allocate a number of virtual screens at autoconfiguration time 173 #options WSDISPLAY_DEFAULTSCREENS=4 174 # use a large software cursor that doesn't blink 175 options PCDISPLAY_SOFTCURSOR 176 177 # Kernel root file system and dump configuration. 178 config netbsd root on ? type ? 179 #config netbsd root on tlp0 type nfs 180 #config netbsd root on pcn0 type nfs 181 182 183 # 184 # Device configuration 185 # 186 187 mainbus0 at root 188 cpu0 at mainbus0 189 190 191 # Basic Bus Support 192 193 # PCI bus support 194 pci0 at mainbus0 bus ? 195 pci* at pchb? bus ? 196 pci* at ppb? bus ? 197 198 # PCI bridges 199 pchb* at pci? dev ? function ? # PCI-Host bridges 200 ppb* at pci? dev ? function ? # PCI-PCI bridges 201 pcib* at pci? dev ? function ? # PCI-ISA bridges 202 pceb* at pci? dev ? function ? # PCI-EISA bridges 203 204 # EISA bus support 205 eisa* at pceb? 206 207 # ISA bus support 208 isa* at pcib? # ISA on PCI-ISA bridge 209 isa* at pceb? 210 211 # PCMCIA bus support 212 pcmcia* at pcic? controller ? socket ? 213 214 # ISA PCMCIA controllers 215 pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000 216 217 #options PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14 218 #options PCIC_ISA_ALLOC_IOBASE=0x0400 219 #options PCIC_ISA_ALLOC_IOSIZE=0x0100 220 221 # ISA Plug-and-Play bus support 222 #isapnp0 at isa? 223 224 # on-board I/O for IBM Personal Power Series 830 IDE controller 225 pnpbus0 at mainbus0 226 227 # Console Devices 228 229 # wscons 230 pckbc0 at isa? # pc keyboard controller 231 pckbd* at pckbc? # PC keyboard 232 pms* at pckbc? # PS/2 mouse for wsmouse 233 vga* at pci? 234 wsdisplay* at vga? console ? 235 wskbd* at pckbd? console ? 236 wsmouse* at pms? mux 0 237 238 attimer0 at isa? # AT Timer 239 pcppi0 at isa? # PC prog. periph. interface 240 isabeep0 at pcppi? # "keyboard" beep 241 242 #mcclock0 at isa? port 0x70 # mc146818 and compatible 243 mcclock* at pnpbus? # mc146818 and compatible 244 mkclock* at pnpbus? # mk48t18 and compatible 245 246 nvram* at pnpbus? 247 248 # Cryptographic Devices 249 250 # PCI cryptographic devices 251 #hifn* at pci? dev ? function ? # Hifn 7755/7811/795x 252 #ubsec* at pci? dev ? function ? # Broadcom 5501/5601/580x/582x 253 254 255 # Serial Devices 256 257 # ISA serial interfaces 258 com0 at isa? port 0x3f8 irq 4 # standard PC serial ports 259 com1 at isa? port 0x2f8 irq 3 260 261 # PCMCIA serial interfaces 262 com* at pcmcia? function ? # Modems and serial cards 263 264 #pcmcom* at pcmcia? function ? # PCMCIA multi-port serial cards 265 #com* at pcmcom? slave ? # ...and the slave devices 266 267 268 # Parallel Printer Interfaces 269 270 # ISA parallel printer interfaces 271 lpt0 at isa? port 0x3bc irq 7 # standard PC parallel ports 272 273 274 # SCSI Controllers and Devices 275 276 # PCI SCSI controllers 277 #adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI 278 ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI 279 #iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI 280 #pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI 281 siop* at pci? dev ? function ? # Symbios 53c8xx SCSI 282 esiop* at pci? dev ? function ? # Symbios 53c875 SCSI and newer 283 284 # PCMCIA SCSI controllers 285 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 286 spc* at pcmcia? function ? # Fujitsu MB87030/MB89352 SCSI 287 288 # SCSI bus support 289 #scsibus* at adw? 290 scsibus* at ahc? 291 scsibus* at aic? 292 #scsibus* at iha? 293 #scsibus* at pcscp? 294 scsibus* at siop? 295 scsibus* at spc? 296 scsibus* at esiop? 297 298 # SCSI devices 299 sd* at scsibus? target ? lun ? # SCSI disk drives 300 st* at scsibus? target ? lun ? # SCSI tape drives 301 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 302 #ch* at scsibus? target ? lun ? # SCSI autochangers 303 #ss* at scsibus? target ? lun ? # SCSI scanners 304 uk* at scsibus? target ? lun ? # SCSI unknown 305 306 # IDE and related devices 307 308 # IDE controller found on most Power Personal machines 309 wdc* at pnpbus? 310 311 # PCI IDE controllers 312 pciide* at pci? dev ? function ? flags 0x0000 313 hptide* at pci? dev ? function ? 314 315 #fdc0 at pnpbus? # standard ISA floppy controller 316 #fd0 at fdc0 drive ? 317 318 # ISA Plug-and-Play IDE controllers 319 #wdc* at isapnp? 320 321 # PCMCIA IDE controllers 322 wdc* at pcmcia? function ? 323 324 # ATA (IDE) bus support 325 atabus* at ata? 326 327 # IDE drives 328 # Flags are used only with controllers that support DMA operations 329 # and mode settings (e.g. some pciide controllers) 330 # The lowest order four bits (rightmost digit) of the flags define the PIO 331 # mode to use, the next set of four bits the DMA mode and the third set the 332 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 333 # to use, and the last bit must be 1 for this setting to be used. 334 # For DMA and UDMA, 0xf (1111) means 'disable'. 335 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 336 # (0xc=1100, 0xa=1010, 0xf=1111) 337 # 0x0000 means "use whatever the drive claims to support". 338 wd* at atabus? drive ? flags 0x0000 339 340 # ATAPI bus support 341 atapibus* at atapi? 342 343 # ATAPI devices 344 # flags have the same meaning as for IDE drives. 345 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 346 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 347 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 348 349 # Miscellaneous mass storage devices 350 351 # ISA Floppy 352 #fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard ISA floppy controller 353 #fd0 at fdc0 drive ? 354 355 # Network Interfaces 356 357 # PCI network interfaces 358 ep* at pci? dev ? function ? # 3Com 3c59x 359 ex* at pci? dev ? function ? # 3Com 3c90x[BC] 360 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 361 ne* at pci? dev ? function ? # NE2000-compatible Ethernet 362 pcn* at pci? dev ? function ? # AMD PCnet-PCI Ethernet 363 rtk* at pci? dev ? function ? # Realtek 8129/8139 364 sip* at pci? dev ? function ? # SiS 900/DP83815 Ethernet 365 tlp* at pci? dev ? function ? # DECchip 21x4x and clones 366 vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet 367 368 # pnpbus network interfaces 369 we* at pnpbus? # WD/SMC Ethernet 370 371 # ISA network interfaces 372 #ep* at isa? port ? irq ? # 3Com 3c509 Ethernet 373 #ne0 at isa? port 0x280 irq 9 # NE2000-compatible Ethernet 374 #ne1 at isa? port 0x300 irq 10 375 #we0 at isa? port 0x280 iomem 0xd0000 irq 9 # WD/SMC Ethernet 376 we1 at isa? port 0x300 iomem 0xe8000 irq 11 377 378 # ISA Plug-and-Play network intefaces 379 #ep* at isapnp? # 3Com 3c509 Ethernet 380 #ne* at isapnp? # NE2000-compatible Ethernet 381 382 # PCMCIA network interfaces 383 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 384 ne* at pcmcia? function ? # NE2000-compatible Ethernet 385 386 # MII/PHY support 387 dmphy* at mii? phy ? # Davicom DM9101 PHYs 388 exphy* at mii? phy ? # 3Com internal PHYs 389 icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 390 inphy* at mii? phy ? # Intel 82555 PHYs 391 iophy* at mii? phy ? # Intel 82553 PHYs 392 lxtphy* at mii? phy ? # Level One LXT-970 PHYs 393 nsphy* at mii? phy ? # NS83840 PHYs 394 nsphyter* at mii? phy ? # NS83843 PHYs 395 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 396 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 397 tlphy* at mii? phy ? # ThunderLAN PHYs 398 tqphy* at mii? phy ? # TDK Semiconductor PHYs 399 ukphy* at mii? phy ? # generic unknown PHYs 400 401 402 # USB Controller and Devices 403 404 # PCI USB controllers 405 #uhci* at pci? dev ? function ? # Universal Host Controller (Intel) 406 #ohci* at pci? dev ? function ? # Open Host Controller 407 408 # USB bus support 409 #usb* at uhci? 410 #usb* at ohci? 411 412 # USB Hubs 413 #uhub* at usb? 414 #uhub* at uhub? port ? configuration ? interface ? 415 416 # USB HID device 417 #uhidev* at uhub? port ? configuration ? interface ? 418 419 # USB Mice 420 #ums* at uhidev? reportid ? 421 #wsmouse* at ums? mux 0 422 423 # USB Keyboards 424 #ukbd* at uhidev? reportid ? 425 #wskbd* at ukbd? console ? mux 1 426 427 # USB serial adpater 428 #ucycom* at uhidev? reportid ? 429 430 # USB Generic HID devices 431 #uhid* at uhidev? reportid ? 432 433 # USB Printer 434 #ulpt* at uhub? port ? configuration ? interface ? 435 436 # USB Modem 437 #umodem* at uhub? port ? configuration ? 438 #ucom* at umodem? 439 440 # USB Mass Storage 441 #umass* at uhub? port ? configuration ? interface ? 442 #scsibus* at umass? channel ? 443 #atapibus* at umass? 444 445 # USB audio 446 #uaudio* at uhub? port ? configuration ? 447 448 # USB Ethernet adapters 449 #aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters 450 #axe* at uhub? port ? # ASIX AX88172 based adapters 451 #cue* at uhub? port ? # CATC USB-EL1201A based adapters 452 #kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters 453 #url* at uhub? port ? # Realtek RTL8150L based adapters 454 #udav* at uhub? port ? # Davicom DM9601 based adapters 455 456 # Prolific PL2301/PL2302 host-to-host adapter 457 #upl* at uhub? port ? 458 459 # Serial adapters 460 #uftdi* at uhub? port ? # FTDI FT8U100AX serial adapter 461 #ucom* at uftdi? portno ? 462 463 #umct* at uhub? port ? # MCT USB-RS232 serial adapter 464 #ucom* at umct? portno ? 465 466 #uplcom* at uhub? port ? # I/O DATA USB-RSAQ2 serial adapter 467 #ucom* at uplcom? portno ? 468 469 #uvscom* at uhub? port ? # SUNTAC Slipper U VS-10U serial adapter 470 #ucom* at uvscom? portno ? 471 472 # Diamond Multimedia Rio 500 473 #urio* at uhub? port ? 474 475 # USB Handspring Visor 476 #uvisor* at uhub? port ? 477 #ucom* at uvisor? 478 479 # Kyocera AIR-EDGE PHONE 480 #ukyopon* at uhub? port ? 481 #ucom* at ukyopon? portno ? 482 483 # Y@P firmware loader 484 #uyap* at uhub? port ? 485 486 # USB Generic driver 487 #ugen* at uhub? port ? 488 489 # USB scanners 490 #uscanner* at uhub? port ? 491 492 493 # Audio device 494 495 # ISA Plug-and-Play audio devices 496 #wss* at isapnp? # CS4232 497 498 # Audio support 499 #audio* at uaudio? 500 #audio* at wss? 501 502 # MIDI support 503 #midi* at pcppi? # MIDI interface to the PC speaker 504 505 # The spkr driver provides a simple tone interface to the built in speaker. 506 #spkr0 at pcppi? # PC speaker 507 508 509 # Joysticks 510 511 # ISA Plug-and-Play joysticks 512 #joy* at isapnp? # Game ports (usually on audio cards) 513 514 # ISA joysticks. Probe is a little strange; add only if you have one. 515 #joy0 at isa? port 0x201 516 517 # Pull in optional local configuration 518 include "arch/prep/conf/GENERIC.local" 519 520 # Pseudo-Devices 521 522 # Not yet ready -- prep lacks generic soft interrupts 523 #pseudo-device crypto # /dev/crypto device 524 #pseudo-device swcrypto # software crypto implementation 525 526 # disk/mass storage pseudo-devices 527 pseudo-device ccd 4 # concatenated/striped disk devices 528 #pseudo-device cgd 4 # cryptographic disk devices 529 pseudo-device raid 8 # RAIDframe disk driver 530 options RAID_AUTOCONFIG # auto-configuration of RAID components 531 # Options to enable various other RAIDframe RAID types. 532 # options RF_INCLUDE_EVENODD=1 533 # options RF_INCLUDE_RAID5_RS=1 534 # options RF_INCLUDE_PARITYLOGGING=1 535 # options RF_INCLUDE_CHAINDECLUSTER=1 536 # options RF_INCLUDE_INTERDECLUSTER=1 537 # options RF_INCLUDE_PARITY_DECLUSTERING=1 538 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 539 pseudo-device fss 4 # file system snapshot device 540 pseudo-device md 1 # memory disk device (ramdisk) 541 pseudo-device vnd # disk-like interface to files 542 #options VND_COMPRESSION # compressed vnd(4) 543 544 # network pseudo-devices 545 pseudo-device loop # network loopback 546 pseudo-device bpfilter # Berkeley packet filter 547 #pseudo-device carp # Common Address Redundancy Protocol 548 pseudo-device ipfilter # IP filter (firewall) and NAT 549 pseudo-device ppp # Point-to-Point Protocol 550 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 551 #pseudo-device sl # Serial Line IP 552 pseudo-device strip # Starmode Radio IP (Metricom) 553 pseudo-device tun # network tunneling over tty 554 pseudo-device tap # virtual Ethernet 555 pseudo-device gre # generic L3 over IP tunnel 556 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 557 #pseudo-device faith # IPv[46] tcp relay translation i/f 558 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 559 pseudo-device vlan # IEEE 802.1q encapsulation 560 pseudo-device bridge # simple inter-network bridging 561 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 562 563 # miscellaneous pseudo-devices 564 pseudo-device pty # pseudo-terminals 565 #pseudo-device sequencer 1 # MIDI sequencer 566 pseudo-device rnd # /dev/random and in-kernel generator 567 #options RND_COM # use "com" randomness as well 568 pseudo-device clockctl # user control of clock subsystem 569 pseudo-device ksyms # /dev/ksyms 570 #pseudo-device pf # PF packet filter 571 #pseudo-device pflog # PF log if 572 573 # a pseudo device needed for Coda # also needs CODA (above) 574 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 575 576 # wscons pseudo-devices 577 pseudo-device wsmux # mouse & keyboard multiplexor 578 pseudo-device wsfont 579 580 # Veriexec 581 # 582 # a pseudo device needed for veriexec 583 #pseudo-device veriexec 1 584 # 585 # Uncomment the fingerprint methods below that are desired. Note that 586 # removing fingerprint methods will have almost no impact on the kernel 587 # code size. 588 # 589 #options VERIFIED_EXEC_FP_RMD160 590 #options VERIFIED_EXEC_FP_SHA256 591 #options VERIFIED_EXEC_FP_SHA384 592 #options VERIFIED_EXEC_FP_SHA512 593 #options VERIFIED_EXEC_FP_SHA1 594 #options VERIFIED_EXEC_FP_MD5 595
Indexes created Sat Oct 25 00:10:07 GMT 2025