GENERIC revision 1.100
1 # $NetBSD: GENERIC,v 1.100 2018/08/01 20:04:13 maxv Exp $ 2 # 3 # machine description file for GENERIC NAS 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/sandpoint/conf/std.sandpoint" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.100 $" 26 27 maxusers 32 28 29 #options ALTIVEC # Include AltiVec support 30 31 # Standard system options 32 #options INSECURE # disable kernel security levels 33 34 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 35 options KTRACE 36 37 options SYSVMSG # System V message queues 38 options SYSVSEM # System V semaphores 39 options SYSVSHM # System V shared memory 40 41 #options MODULAR # module(7) support 42 #options MODULAR_DEFAULT_AUTOLOAD 43 #options USERCONF # userconf(4) support 44 45 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48 # Alternate buffer queue strategies for better responsiveness under high 49 # disk I/O load. 50 #options BUFQ_READPRIO 51 #options BUFQ_PRIOCSCAN 52 53 # Diagnostic/debugging support options 54 #options DIAGNOSTIC # cheap kernel consistency checks 55 #options DEBUG # expensive debugging checks/support 56 options DDB 57 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 58 #options TRAP_PANICWAIT 59 #options PMAPCHECK 60 #options PMAPDEBUG 61 options MSGBUFSIZE=65536 62 63 #makeoptions DEBUG="-g" 64 65 # Compatibility options 66 include "conf/compat_netbsd09.config" 67 options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI 68 #options COMPAT_386BSD_MBRPART # recognize old partition ID 69 #options COMPAT_LINUX # binary compatibility with Linux 70 71 # Wedge support 72 options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances 73 options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges 74 #options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges 75 #options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges 76 options DKWEDGE_METHOD_APPLE # Support Apple partitions as wedges 77 #options DKWEDGE_METHOD_RDB # Support RDB partitions as wedges 78 79 # File systems 80 file-system FFS # UFS 81 file-system EXT2FS # second extended file system (linux) 82 #file-system LFS # log-structured file system 83 file-system MFS # memory file system 84 file-system NFS # Network File System client 85 #file-system NTFS # Windows/NT file system (experimental) 86 file-system CD9660 # ISO 9660 + Rock Ridge file system 87 file-system MSDOSFS # MS-DOS file system 88 file-system FDESC # /dev/fd 89 file-system KERNFS # /kern 90 file-system NULLFS # loopback file system 91 #file-system OVERLAY # overlay file system 92 file-system PROCFS # /proc 93 #file-system UMAPFS # NULLFS + uid and gid remapping 94 #file-system UNION # union file system 95 #file-system CODA # Coda File System; also needs vcoda (below) 96 #file-system SMBFS # experimental - CIFS; also needs nsmb (below) 97 file-system PTYFS # /dev/ptm support 98 file-system TMPFS # Efficient memory file-system 99 100 # File system options 101 options QUOTA # legacy UFS quotas 102 options QUOTA2 # new, in-filesystem UFS quotas 103 #options DISKLABEL_EI # disklabel Endian Independent support 104 #options FFS_EI # FFS Endian Independent support 105 options WAPBL # File system journaling support 106 options NFSSERVER # Network File System server 107 #options FFS_NO_SNAPSHOT # No FFS snapshot support 108 options UFS_EXTATTR # Extended attribute support for UFS1 109 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 110 111 #options NFS_BOOT_DHCP 112 options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP 113 114 # Networking options 115 #options GATEWAY # packet forwarding 116 options INET # IP + ICMP + TCP + UDP 117 options INET6 # IPV6 118 #options IPSEC # IP security 119 #options IPSEC_DEBUG # debug for IP security 120 #options MROUTING # IP multicast routing 121 #options PIM # Protocol Independent Multicast 122 #options NETATALK # AppleTalk networking protocols 123 #options PPP_BSDCOMP # BSD-Compress compression support for PPP 124 #options PPP_DEFLATE # Deflate compression support for PPP 125 #options PPP_FILTER # Active filter support for PPP (requires BPF) 126 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 127 128 #options ALTQ # Manipulate network interfaces' output queues 129 #options ALTQ_BLUE # Stochastic Fair Blue 130 #options ALTQ_CBQ # Class-Based Queueing 131 #options ALTQ_CDNR # Diffserv Traffic Conditioner 132 #options ALTQ_FIFOQ # First-In First-Out Queue 133 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 134 #options ALTQ_HFSC # Hierarchical Fair Service Curve 135 #options ALTQ_LOCALQ # Local queueing discipline 136 #options ALTQ_PRIQ # Priority Queueing 137 #options ALTQ_RED # Random Early Detection 138 #options ALTQ_RIO # RED with IN/OUT 139 #options ALTQ_WFQ # Weighted Fair Queueing 140 141 # These options enable verbose messages for several subsystems. 142 # Warning, these may compile large string tables into the kernel! 143 #options PCIVERBOSE # verbose PCI device autoconfig messages 144 #options MIIVERBOSE # verbose PHY autoconfig messages 145 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 146 #options SCSIVERBOSE # human readable SCSI error messages 147 #options USBVERBOSE # verbose USB device autoconfig messages 148 149 # Kernel root file system and dump configuration 150 config netbsd root on ? type ? 151 152 # 153 # Device configuration 154 # 155 mainbus0 at root 156 cpu* at mainbus0 157 158 #cfi0 at mainbus0 159 #nor* at cfi? 160 #flash* at nor? 161 162 nhpow0 at mainbus0 # NH230/231 power,LED,buttons 163 164 #options PCI_NETBSD_CONFIGURE 165 pci* at mainbus0 bus ? 166 pchb* at pci? dev ? function ? # PCI host bridge 167 168 eumb* at mainbus0 169 com0 at eumb? unit 0 # console at 0x4500 170 #com1 at eumb? unit 1 171 satmgr0 at eumb? unit 1 # satmgr at 0x4600 172 ociic* at eumb? 173 iic* at ociic? 174 lmtemp* at iic? addr 0x48 # LM75 temperature sensor 175 rs5c372rtc* at iic? addr 0x32 176 s390rtc* at iic? addr 0x30 177 pcf8563rtc* at iic? addr 0x51 178 dsrtc* at iic? addr 0x68 179 strtc* at iic? addr 0x68 180 options STRTC_NO_WATCHDOG 181 options STRTC_NO_USERRAM 182 183 # PCI IDE controllers - see pciide(4) for supported hardware. 184 acardide* at pci? dev ? function ? # Acard IDE controllers 185 cmdide* at pci? dev ? function ? # CMD tech IDE controllers 186 iteide* at pci? dev ? function ? # IT Express IDE controllers 187 satalink* at pci? dev ? function ? # SiI SATALink controllers 188 viaide* at pci? dev ? function ? # VIA IDE controllers 189 190 # ATA (IDE) bus support 191 atabus* at ata? 192 193 # IDE drives 194 # Flags are used only with controllers that support DMA operations 195 # and mode settings (e.g. some pciide controllers) 196 # The lowest order four bits (rightmost digit) of the flags define the PIO 197 # mode to use, the next set of four bits the DMA mode and the third set the 198 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 199 # to use, and the last bit must be 1 for this setting to be used. 200 # For DMA and UDMA, 0xf (1111) means 'disable'. 201 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 202 # (0xc=1100, 0xa=1010, 0xf=1111) 203 # 0x0000 means "use whatever the drive claims to support". 204 wd* at atabus? drive ? flags 0x0000 205 206 # ATAPI bus support 207 atapibus* at atapi? 208 209 # ATAPI devices 210 # flags have the same meaning as for IDE drives. 211 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 212 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 213 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 214 215 # PCI network interfaces 216 ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g 217 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 218 skc* at pci? dev ? function ? # Marvell Yukon Gigabit Ethernet 219 sk* at skc? # Marvell Yukon Gigabit Ethernet 220 stge* at pci? dev ? function ? # Sundance ST1023 Gigabit 221 tlp* at pci? dev ? function ? # DEC Tulip and similar 222 wm* at pci? dev ? function ? # Intel 8254x Gigabit Ethernet 223 224 inphy* at mii? phy ? # Intel 82555 PHYs 225 nsphy* at mii? phy ? # NS83840 PHYs 226 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 227 makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs 228 ukphy* at mii? phy ? # generic unknown PHYs 229 230 # GPIO devices 231 gpio* at gpiobus? 232 233 # USB Controller and Devices 234 ehci* at pci? dev ? function ? # Enhanced Host Controller 235 ohci* at pci? dev ? function ? # Open Host Controller 236 237 # USB bus support 238 usb* at ehci? 239 usb* at ohci? 240 241 # USB Hubs 242 uhub* at usb? 243 uhub* at uhub? port ? 244 245 # USB HID devices 246 uhidev* at uhub? port ? configuration ? interface ? # USB HID device 247 uthum* at uhidev? reportid ? # TEMPerHUM sensors 248 uhid* at uhidev? reportid ? # USB Generic HID 249 250 # USB video 251 uvideo* at uhub? # USB Video Class capture devices 252 video* at videobus? 253 254 # USB printer 255 ulpt* at uhub? port ? configuration ? interface ? 256 257 # USB Mass Storage 258 umass* at uhub? port ? configuration ? interface ? 259 wd* at umass? 260 261 # USB scanners 262 #uscanner* at uhub? port ? 263 ugen* at uhub? port ? configuration ? interface ? # USB Generic driver 264 265 # SCSI bus support 266 scsibus* at umass? 267 268 # SCSI devices 269 sd* at scsibus? target ? lun ? # SCSI disk drives 270 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 271 272 273 # 274 # Pseudo-Devices 275 # 276 #pseudo-device crypto # /dev/crypto device 277 #pseudo-device swcrypto # software crypto implementation 278 279 # disk/mass storage pseudo-devices 280 #pseudo-device ccd # concatenated/striped disk devices 281 #pseudo-device cgd # cryptographic disk devices 282 pseudo-device fss # file system snapshot device 283 #pseudo-device putter # for puffs and pud 284 285 pseudo-device raid # RAIDframe disk driver 286 options RAID_AUTOCONFIG # auto-configuration of RAID components 287 # Options to enable various other RAIDframe RAID types. 288 #options RF_INCLUDE_EVENODD=1 289 #options RF_INCLUDE_RAID5_RS=1 290 #options RF_INCLUDE_PARITYLOGGING=1 291 #options RF_INCLUDE_CHAINDECLUSTER=1 292 #options RF_INCLUDE_INTERDECLUSTER=1 293 #options RF_INCLUDE_PARITY_DECLUSTERING=1 294 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 295 296 pseudo-device vnd 297 #options VND_COMPRESSION # compressed vnd(4) 298 299 # network pseudo-devices 300 pseudo-device loop 301 pseudo-device bpfilter # packet filter 302 #pseudo-device carp # Common Address Redundancy Protocol 303 #pseudo-device ppp # Point-to-Point Protocol 304 #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 305 #pseudo-device npf # NPF packet filter 306 #pseudo-device sl # Serial Line IP 307 #pseudo-device tun # network tunneling over tty 308 #pseudo-device tap # virtual Ethernet 309 #pseudo-device gre # generic L3 over IP tunnel 310 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 311 #pseudo-device faith # IPv[46] tcp relay translation i/f 312 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 313 #pseudo-device vlan # IEEE 802.1q encapsulation 314 #pseudo-device bridge # simple inter-network bridging 315 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 316 #pseudo-device agr # IEEE 802.3ad link aggregation 317 318 # 319 # accept filters 320 #pseudo-device accf_data # "dataready" accept filter 321 #pseudo-device accf_http # "httpready" accept filter 322 323 # miscellaneous pseudo-devices 324 pseudo-device pty 325 pseudo-device clockctl # user control of clock subsystem 326 pseudo-device ksyms # /dev/ksyms 327 #pseudo-device lockstat # lock profiling 328 329 # a pseudo device needed for Coda # also needs CODA (above) 330 #pseudo-device vcoda # coda minicache <-> venus comm. 331 332 # a pseudo device needed for SMBFS 333 #pseudo-device nsmb # experimental - SMB requester 334 335 # userland interface to drivers, including autoconf and properties retrieval 336 pseudo-device drvctl 337 338 # Veriexec 339 # 340 # a pseudo device needed for veriexec 341 #pseudo-device veriexec 342 # 343 # Uncomment the fingerprint methods below that are desired. Note that 344 # removing fingerprint methods will have almost no impact on the kernel 345 # code size. 346 # 347 #options VERIFIED_EXEC_FP_SHA256 348 #options VERIFIED_EXEC_FP_SHA384 349 #options VERIFIED_EXEC_FP_SHA512 350 351 #options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 352 #options PAX_ASLR=0 # PaX Address Space Layout Randomization 353
Indexes created Tue Oct 14 11:09:46 GMT 2025