GENERIC revision 1.91
1 # $NetBSD: GENERIC,v 1.91 2015/09/30 14:22:02 phx Exp $ 2 # 3 # machine description file for GENERIC NAS 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/sandpoint/conf/std.sandpoint" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.91 $" 26 27 maxusers 32 28 29 #options ALTIVEC # Include AltiVec support 30 31 # Standard system options 32 #options INSECURE # disable kernel security levels 33 34 options RTC_OFFSET=0 # hardware clock is this many mins. west of GMT 35 options KTRACE 36 37 options SYSVMSG # System V message queues 38 options SYSVSEM # System V semaphores 39 options SYSVSHM # System V shared memory 40 41 #options MODULAR # module(7) support 42 #options MODULAR_DEFAULT_AUTOLOAD 43 #options USERCONF # userconf(4) support 44 45 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48 # Enable experimental buffer queue strategy for better responsiveness under 49 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 50 #options BUFQ_READPRIO 51 #options BUFQ_PRIOCSCAN 52 53 # Diagnostic/debugging support options 54 #options DIAGNOSTIC # cheap kernel consistency checks 55 #options DEBUG # expensive debugging checks/support 56 options DDB 57 #options DDB_HISTORY_SIZE=100 # Enable history editing in DDB 58 #options TRAP_PANICWAIT 59 #options PMAPCHECK 60 #options PMAPDEBUG 61 options MSGBUFSIZE=65536 62 63 #makeoptions DEBUG="-g" 64 65 # Compatibility options 66 options COMPAT_NOMID # NetBSD 0.8, 386BSD, and BSDI 67 options COMPAT_09 # NetBSD 0.9, 68 options COMPAT_10 # NetBSD 1.0, 69 options COMPAT_11 # NetBSD 1.1, 70 options COMPAT_12 # NetBSD 1.2 (and 386BSD and BSDI), 71 options COMPAT_13 # NetBSD 1.3 (and 386BSD and BSDI), 72 options COMPAT_14 # NetBSD 1.4, 73 options COMPAT_15 # NetBSD 1.5, 74 options COMPAT_16 # NetBSD 1.6, 75 options COMPAT_20 # NetBSD 2.0, 76 options COMPAT_30 # NetBSD 3.0, 77 options COMPAT_40 # NetBSD 4.0, 78 options COMPAT_50 # NetBSD 5.0, 79 options COMPAT_60 # NetBSD 6.0, and 80 options COMPAT_70 # NetBSD 7.0 binary compatibility. 81 options COMPAT_43 # 4.3BSD, 386BSD, and BSDI 82 #options COMPAT_386BSD_MBRPART # recognize old partition ID 83 #options COMPAT_LINUX # binary compatibility with Linux 84 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 85 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 86 87 # Wedge support 88 options DKWEDGE_AUTODISCOVER # Automatically add dk(4) instances 89 options DKWEDGE_METHOD_GPT # Supports GPT partitions as wedges 90 #options DKWEDGE_METHOD_BSDLABEL # Support disklabel entries as wedges 91 #options DKWEDGE_METHOD_MBR # Support MBR partitions as wedges 92 options DKWEDGE_METHOD_APPLE # Support Apple partitions as wedges 93 94 # File systems 95 file-system FFS # UFS 96 file-system EXT2FS # second extended file system (linux) 97 #file-system LFS # log-structured file system 98 file-system MFS # memory file system 99 file-system NFS # Network File System client 100 #file-system NTFS # Windows/NT file system (experimental) 101 file-system CD9660 # ISO 9660 + Rock Ridge file system 102 file-system MSDOSFS # MS-DOS file system 103 file-system FDESC # /dev/fd 104 file-system KERNFS # /kern 105 file-system NULLFS # loopback file system 106 #file-system OVERLAY # overlay file system 107 file-system PROCFS # /proc 108 #file-system UMAPFS # NULLFS + uid and gid remapping 109 #file-system UNION # union file system 110 #file-system CODA # Coda File System; also needs vcoda (below) 111 #file-system SMBFS # experimental - CIFS; also needs nsmb (below) 112 file-system PTYFS # /dev/ptm support 113 file-system TMPFS # Efficient memory file-system 114 115 # File system options 116 options QUOTA # legacy UFS quotas 117 options QUOTA2 # new, in-filesystem UFS quotas 118 #options FFS_EI # FFS Endian Independent support 119 options WAPBL # File system journaling support 120 options NFSSERVER # Network File System server 121 #options FFS_NO_SNAPSHOT # No FFS snapshot support 122 options UFS_EXTATTR # Extended attribute support for UFS1 123 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 124 125 #options NFS_BOOT_DHCP 126 options NFS_BOOT_BOOTPARAM,NFS_BOOT_BOOTP 127 128 # Networking options 129 #options GATEWAY # packet forwarding 130 options INET # IP + ICMP + TCP + UDP 131 options INET6 # IPV6 132 #options IPSEC # IP security 133 #options IPSEC_DEBUG # debug for IP security 134 #options MROUTING # IP multicast routing 135 #options PIM # Protocol Independent Multicast 136 #options NETATALK # AppleTalk networking protocols 137 #options PPP_BSDCOMP # BSD-Compress compression support for PPP 138 #options PPP_DEFLATE # Deflate compression support for PPP 139 #options PPP_FILTER # Active filter support for PPP (requires BPF) 140 #options IPFILTER_LOG # ipmon(8) log support 141 #options IPFILTER_LOOKUP # ippool(8) support 142 #options IPFILTER_COMPAT # Compat for IP-Filter 143 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 144 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 145 146 #options ALTQ # Manipulate network interfaces' output queues 147 #options ALTQ_BLUE # Stochastic Fair Blue 148 #options ALTQ_CBQ # Class-Based Queueing 149 #options ALTQ_CDNR # Diffserv Traffic Conditioner 150 #options ALTQ_FIFOQ # First-In First-Out Queue 151 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 152 #options ALTQ_HFSC # Hierarchical Fair Service Curve 153 #options ALTQ_LOCALQ # Local queueing discipline 154 #options ALTQ_PRIQ # Priority Queueing 155 #options ALTQ_RED # Random Early Detection 156 #options ALTQ_RIO # RED with IN/OUT 157 #options ALTQ_WFQ # Weighted Fair Queueing 158 159 # These options enable verbose messages for several subsystems. 160 # Warning, these may compile large string tables into the kernel! 161 #options PCIVERBOSE # verbose PCI device autoconfig messages 162 #options MIIVERBOSE # verbose PHY autoconfig messages 163 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 164 #options SCSIVERBOSE # human readable SCSI error messages 165 #options USBVERBOSE # verbose USB device autoconfig messages 166 167 # Kernel root file system and dump configuration 168 config netbsd root on ? type ? 169 170 # 171 # Device configuration 172 # 173 mainbus0 at root 174 cpu* at mainbus0 175 176 #cfi0 at mainbus0 177 #nor* at cfi? 178 #flash* at nor? 179 180 nhpow0 at mainbus0 # NH230/231 power,LED,buttons 181 182 #options PCI_NETBSD_CONFIGURE 183 pci* at mainbus0 bus ? 184 pchb* at pci? dev ? function ? # PCI host bridge 185 186 eumb* at mainbus0 187 com0 at eumb? unit 0 # console at 0x4500 188 #com1 at eumb? unit 1 189 satmgr0 at eumb? unit 1 # satmgr at 0x4600 190 ociic* at eumb? 191 iic* at ociic? 192 lmtemp* at iic? addr 0x48 # LM75 temperature sensor 193 rs5c372rtc* at iic? addr 0x32 194 s390rtc* at iic? addr 0x30 195 pcf8563rtc* at iic? addr 0x51 196 dsrtc* at iic? addr 0x68 197 strtc* at iic? addr 0x68 198 options STRTC_NO_WATCHDOG 199 options STRTC_NO_USERRAM 200 201 # PCI IDE controllers - see pciide(4) for supported hardware. 202 acardide* at pci? dev ? function ? # Acard IDE controllers 203 cmdide* at pci? dev ? function ? # CMD tech IDE controllers 204 iteide* at pci? dev ? function ? # IT Express IDE controllers 205 satalink* at pci? dev ? function ? # SiI SATALink controllers 206 viaide* at pci? dev ? function ? # VIA IDE controllers 207 208 # ATA (IDE) bus support 209 atabus* at ata? 210 211 # IDE drives 212 # Flags are used only with controllers that support DMA operations 213 # and mode settings (e.g. some pciide controllers) 214 # The lowest order four bits (rightmost digit) of the flags define the PIO 215 # mode to use, the next set of four bits the DMA mode and the third set the 216 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 217 # to use, and the last bit must be 1 for this setting to be used. 218 # For DMA and UDMA, 0xf (1111) means 'disable'. 219 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 220 # (0xc=1100, 0xa=1010, 0xf=1111) 221 # 0x0000 means "use whatever the drive claims to support". 222 wd* at atabus? drive ? flags 0x0000 223 224 # ATAPI bus support 225 atapibus* at atapi? 226 227 # ATAPI devices 228 # flags have the same meaning as for IDE drives. 229 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 230 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 231 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 232 233 # PCI network interfaces 234 ral* at pci? dev ? function ? # Ralink Technology RT25x0 802.11a/b/g 235 re* at pci? dev ? function ? # Realtek 8139C+/8169/8169S/8110S 236 skc* at pci? dev ? function ? # Marvell Yukon Gigabit Ethernet 237 sk* at skc? # Marvell Yukon Gigabit Ethernet 238 stge* at pci? dev ? function ? # Sundance ST1023 Gigabit 239 tlp* at pci? dev ? function ? # DEC Tulip and similar 240 wm* at pci? dev ? function ? # Intel 8254x Gigabit Ethernet 241 242 inphy* at mii? phy ? # Intel 82555 PHYs 243 nsphy* at mii? phy ? # NS83840 PHYs 244 rgephy* at mii? phy ? # Realtek 8169S/8110S internal PHYs 245 makphy* at mii? phy ? # Marvell Semiconductor 88E1000 PHYs 246 ukphy* at mii? phy ? # generic unknown PHYs 247 248 # GPIO devices 249 gpio* at gpiobus? 250 251 # USB Controller and Devices 252 ehci* at pci? dev ? function ? # Enhanced Host Controller 253 ohci* at pci? dev ? function ? # Open Host Controller 254 255 # USB bus support 256 usb* at ehci? 257 usb* at ohci? 258 259 # USB Hubs 260 uhub* at usb? 261 uhub* at uhub? port ? 262 263 # USB HID devices 264 uhidev* at uhub? port ? configuration ? interface ? # USB HID device 265 uthum* at uhidev? reportid ? # TEMPerHUM sensors 266 uhid* at uhidev? reportid ? # USB Generic HID 267 268 # USB video 269 uvideo* at uhub? # USB Video Class capture devices 270 video* at videobus? 271 272 # USB printer 273 ulpt* at uhub? port ? configuration ? interface ? 274 275 # USB Mass Storage 276 umass* at uhub? port ? configuration ? interface ? 277 wd* at umass? 278 279 # USB scanners 280 #uscanner* at uhub? port ? 281 ugen* at uhub? port ? configuration ? interface ? # USB Generic driver 282 283 # SCSI bus support 284 scsibus* at umass? 285 286 # SCSI devices 287 sd* at scsibus? target ? lun ? # SCSI disk drives 288 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 289 290 291 # 292 # Pseudo-Devices 293 # 294 #pseudo-device crypto # /dev/crypto device 295 #pseudo-device swcrypto # software crypto implementation 296 297 # disk/mass storage pseudo-devices 298 #pseudo-device ccd # concatenated/striped disk devices 299 #pseudo-device cgd # cryptographic disk devices 300 pseudo-device fss # file system snapshot device 301 #pseudo-device putter # for puffs and pud 302 303 pseudo-device raid # RAIDframe disk driver 304 options RAID_AUTOCONFIG # auto-configuration of RAID components 305 # Options to enable various other RAIDframe RAID types. 306 #options RF_INCLUDE_EVENODD=1 307 #options RF_INCLUDE_RAID5_RS=1 308 #options RF_INCLUDE_PARITYLOGGING=1 309 #options RF_INCLUDE_CHAINDECLUSTER=1 310 #options RF_INCLUDE_INTERDECLUSTER=1 311 #options RF_INCLUDE_PARITY_DECLUSTERING=1 312 #options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 313 314 pseudo-device vnd 315 #options VND_COMPRESSION # compressed vnd(4) 316 317 # network pseudo-devices 318 pseudo-device loop 319 pseudo-device bpfilter # packet filter 320 #pseudo-device carp # Common Address Redundancy Protocol 321 #pseudo-device ppp # Point-to-Point Protocol 322 #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 323 #pseudo-device ipfilter 324 #pseudo-device pf # PF packet filter 325 #pseudo-device pflog # PF log if 326 #pseudo-device sl # Serial Line IP 327 #pseudo-device tun # network tunneling over tty 328 #pseudo-device tap # virtual Ethernet 329 #pseudo-device gre # generic L3 over IP tunnel 330 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 331 #pseudo-device faith # IPv[46] tcp relay translation i/f 332 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 333 #pseudo-device vlan # IEEE 802.1q encapsulation 334 #pseudo-device bridge # simple inter-network bridging 335 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 336 #pseudo-device agr # IEEE 802.3ad link aggregation 337 338 # 339 # accept filters 340 #pseudo-device accf_data # "dataready" accept filter 341 #pseudo-device accf_http # "httpready" accept filter 342 343 # miscellaneous pseudo-devices 344 pseudo-device pty 345 pseudo-device clockctl # user control of clock subsystem 346 pseudo-device ksyms # /dev/ksyms 347 #pseudo-device lockstat # lock profiling 348 349 # a pseudo device needed for Coda # also needs CODA (above) 350 #pseudo-device vcoda # coda minicache <-> venus comm. 351 352 # a pseudo device needed for SMBFS 353 #pseudo-device nsmb # experimental - SMB requester 354 355 # userland interface to drivers, including autoconf and properties retrieval 356 pseudo-device drvctl 357 358 # Veriexec 359 # 360 # a pseudo device needed for veriexec 361 #pseudo-device veriexec 362 # 363 # Uncomment the fingerprint methods below that are desired. Note that 364 # removing fingerprint methods will have almost no impact on the kernel 365 # code size. 366 # 367 #options VERIFIED_EXEC_FP_RMD160 368 #options VERIFIED_EXEC_FP_SHA256 369 #options VERIFIED_EXEC_FP_SHA384 370 #options VERIFIED_EXEC_FP_SHA512 371 #options VERIFIED_EXEC_FP_SHA1 372 #options VERIFIED_EXEC_FP_MD5 373 374 #options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 375 #options PAX_ASLR=0 # PaX Address Space Layout Randomization 376
Indexes created Thu Oct 16 14:10:15 GMT 2025