Home | History | Annotate | Line # | Download | only in dev
int.c revision 1.21
      1  1.21     matt /*	$NetBSD: int.c,v 1.21 2009/12/14 00:46:13 matt Exp $	*/
      2   1.1   sekiya 
      3   1.1   sekiya /*
      4  1.20   rumble  * Copyright (c) 2009 Stephen M. Rumble
      5   1.1   sekiya  * Copyright (c) 2004 Christopher SEKIYA
      6   1.1   sekiya  * All rights reserved.
      7   1.1   sekiya  *
      8   1.1   sekiya  * Redistribution and use in source and binary forms, with or without
      9   1.1   sekiya  * modification, are permitted provided that the following conditions
     10   1.1   sekiya  * are met:
     11   1.1   sekiya  * 1. Redistributions of source code must retain the above copyright
     12   1.1   sekiya  *    notice, this list of conditions and the following disclaimer.
     13   1.1   sekiya  * 2. Redistributions in binary form must reproduce the above copyright
     14   1.1   sekiya  *    notice, this list of conditions and the following disclaimer in the
     15   1.1   sekiya  *    documentation and/or other materials provided with the distribution.
     16   1.1   sekiya  * 3. The name of the author may not be used to endorse or promote products
     17   1.1   sekiya  *    derived from this software without specific prior written permission.
     18   1.1   sekiya  *
     19   1.1   sekiya  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     20   1.1   sekiya  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     21   1.1   sekiya  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     22   1.1   sekiya  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     23   1.1   sekiya  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     24   1.1   sekiya  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     25   1.1   sekiya  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     26   1.1   sekiya  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     27   1.1   sekiya  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     28   1.1   sekiya  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     29   1.1   sekiya  */
     30   1.1   sekiya 
     31   1.1   sekiya /*
     32  1.20   rumble  * INT1/INT2/INT3 interrupt controllers (IP6, IP10, IP12, IP20, IP22, IP24...)
     33   1.1   sekiya  */
     34   1.1   sekiya 
     35   1.1   sekiya #include <sys/cdefs.h>
     36  1.21     matt __KERNEL_RCSID(0, "$NetBSD: int.c,v 1.21 2009/12/14 00:46:13 matt Exp $");
     37   1.1   sekiya 
     38   1.1   sekiya #include "opt_cputype.h"
     39   1.1   sekiya 
     40   1.1   sekiya #include <sys/param.h>
     41   1.1   sekiya #include <sys/proc.h>
     42   1.1   sekiya #include <sys/systm.h>
     43  1.14   rumble #include <sys/timetc.h>
     44   1.1   sekiya #include <sys/kernel.h>
     45   1.1   sekiya #include <sys/device.h>
     46   1.8   sekiya #include <sys/malloc.h>
     47   1.1   sekiya 
     48   1.1   sekiya #include <dev/ic/i8253reg.h>
     49   1.1   sekiya #include <machine/sysconf.h>
     50   1.1   sekiya #include <machine/machtype.h>
     51   1.1   sekiya #include <machine/bus.h>
     52   1.1   sekiya #include <mips/locore.h>
     53   1.1   sekiya 
     54   1.1   sekiya #include <mips/cache.h>
     55   1.1   sekiya 
     56  1.20   rumble #include <sgimips/dev/int1reg.h>
     57   1.1   sekiya #include <sgimips/dev/int2reg.h>
     58   1.3   sekiya #include <sgimips/dev/int2var.h>
     59   1.1   sekiya 
     60   1.1   sekiya static bus_space_handle_t ioh;
     61   1.1   sekiya static bus_space_tag_t iot;
     62   1.1   sekiya 
     63   1.1   sekiya struct int_softc {
     64   1.1   sekiya 	struct device sc_dev;
     65   1.1   sekiya };
     66   1.1   sekiya 
     67   1.1   sekiya 
     68   1.1   sekiya static int	int_match(struct device *, struct cfdata *, void *);
     69   1.1   sekiya static void	int_attach(struct device *, struct device *, void *);
     70  1.20   rumble static void	int1_local_intr(uint32_t, uint32_t, uint32_t, uint32_t);
     71  1.20   rumble static void    *int1_intr_establish(int, int, int (*)(void *), void *);
     72  1.20   rumble static void    *int2_intr_establish(int, int, int (*)(void *), void *);
     73  1.20   rumble static void 	int2_local0_intr(uint32_t, uint32_t, uint32_t, uint32_t);
     74  1.20   rumble static void	int2_local1_intr(uint32_t, uint32_t, uint32_t, uint32_t);
     75  1.20   rumble static int 	int2_mappable_intr(void *);
     76  1.20   rumble static void    *int2_intr_establish(int, int, int (*)(void *), void *);
     77  1.13   rumble static void	int_8254_cal(void);
     78  1.14   rumble static u_int	int_8254_get_timecount(struct timecounter *);
     79  1.19  tsutsui static void	int_8254_intr0(uint32_t, uint32_t, uint32_t, uint32_t);
     80  1.19  tsutsui static void	int_8254_intr1(uint32_t, uint32_t, uint32_t, uint32_t);
     81  1.13   rumble 
     82  1.13   rumble #ifdef MIPS3
     83  1.20   rumble static u_long	int2_cpu_freq(struct device *);
     84  1.20   rumble static u_long	int2_cal_timer(void);
     85  1.13   rumble #endif
     86   1.1   sekiya 
     87  1.14   rumble static struct timecounter int_8254_timecounter = {
     88  1.14   rumble 	int_8254_get_timecount,	/* get_timecount */
     89  1.14   rumble 	0,			/* no poll_pps */
     90  1.14   rumble 	~0u,			/* counter_mask */
     91  1.20   rumble 	0,			/* frequency; set in int_8254_cal */
     92  1.14   rumble 	"int i8254",		/* name */
     93  1.14   rumble 	100,			/* quality */
     94  1.14   rumble 	NULL,			/* prev */
     95  1.14   rumble 	NULL,			/* next */
     96  1.14   rumble };
     97  1.14   rumble 
     98  1.14   rumble static u_long int_8254_tc_count;
     99  1.14   rumble 
    100   1.1   sekiya CFATTACH_DECL(int, sizeof(struct int_softc),
    101  1.19  tsutsui     int_match, int_attach, NULL, NULL);
    102   1.1   sekiya 
    103   1.1   sekiya static int
    104   1.1   sekiya int_match(struct device *parent, struct cfdata *match, void *aux)
    105   1.1   sekiya {
    106   1.6    pooka 
    107  1.20   rumble 	switch (mach_type) {
    108  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    109  1.20   rumble 	case MACH_SGI_IP12:
    110  1.20   rumble 	case MACH_SGI_IP20:
    111  1.20   rumble 	case MACH_SGI_IP22:
    112   1.1   sekiya 		return 1;
    113  1.20   rumble 	}
    114   1.1   sekiya 
    115   1.1   sekiya 	return 0;
    116   1.1   sekiya }
    117   1.1   sekiya 
    118   1.1   sekiya static void
    119   1.1   sekiya int_attach(struct device *parent, struct device *self, void *aux)
    120   1.1   sekiya {
    121  1.19  tsutsui 	uint32_t address;
    122   1.1   sekiya 
    123  1.20   rumble 	switch (mach_type) {
    124  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    125  1.20   rumble 		address = INT1_IP6_IP10;
    126  1.20   rumble 		break;
    127  1.20   rumble 
    128  1.20   rumble 	case MACH_SGI_IP12:
    129  1.20   rumble 		address = INT2_IP12;
    130  1.20   rumble 		break;
    131  1.20   rumble 
    132  1.20   rumble 	case MACH_SGI_IP20:
    133  1.20   rumble 		address = INT2_IP20;
    134  1.20   rumble 		break;
    135  1.20   rumble 
    136  1.20   rumble 	case MACH_SGI_IP22:
    137   1.1   sekiya 		if (mach_subtype == MACH_SGI_IP22_FULLHOUSE)
    138  1.20   rumble 			address = INT2_IP22;
    139   1.1   sekiya 		else
    140  1.20   rumble 			address = INT2_IP24;
    141  1.20   rumble 		break;
    142  1.20   rumble 
    143  1.20   rumble 	default:
    144   1.1   sekiya 		panic("\nint0: passed match, but failed attach?");
    145  1.20   rumble 	}
    146   1.1   sekiya 
    147  1.16   rumble 	printf(" addr 0x%x\n", address);
    148  1.10  tsutsui 
    149   1.1   sekiya 	bus_space_map(iot, address, 0, 0, &ioh);
    150   1.1   sekiya 	iot = SGIMIPS_BUS_SPACE_NORMAL;
    151   1.1   sekiya 
    152   1.1   sekiya 	switch (mach_type) {
    153  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    154  1.20   rumble 		/* Clean out interrupt masks */
    155  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_LOCAL_MASK, 0);
    156  1.20   rumble 
    157  1.20   rumble 		/* Turn off timers and clear interrupts */
    158  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_TIMER_CONTROL,
    159  1.20   rumble 		    (TIMER_SEL0 | TIMER_16BIT | TIMER_SWSTROBE));
    160  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_TIMER_CONTROL,
    161  1.20   rumble 		    (TIMER_SEL1 | TIMER_16BIT | TIMER_SWSTROBE));
    162  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_TIMER_CONTROL,
    163  1.20   rumble 		    (TIMER_SEL2 | TIMER_16BIT | TIMER_SWSTROBE));
    164  1.20   rumble 		wbflush();
    165  1.20   rumble 		delay(4);
    166  1.20   rumble 		bus_space_read_1(iot, ioh, INT1_TIMER_0_ACK);
    167  1.20   rumble 		bus_space_read_1(iot, ioh, INT1_TIMER_1_ACK);
    168  1.20   rumble 
    169  1.20   rumble 		platform.intr_establish = int1_intr_establish;
    170  1.20   rumble 		platform.intr1 = int1_local_intr;
    171  1.20   rumble 		platform.intr2 = int_8254_intr0;
    172  1.19  tsutsui 		platform.intr4 = int_8254_intr1;
    173  1.19  tsutsui 		int_8254_cal();
    174  1.19  tsutsui 		break;
    175  1.20   rumble 
    176  1.20   rumble 	case MACH_SGI_IP12:
    177  1.19  tsutsui 	case MACH_SGI_IP20:
    178  1.19  tsutsui 	case MACH_SGI_IP22:
    179  1.20   rumble 		/* Clean out interrupt masks */
    180  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL0_MASK, 0);
    181  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL1_MASK, 0);
    182  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_MAP_MASK0, 0);
    183  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_MAP_MASK1, 0);
    184  1.20   rumble 
    185  1.20   rumble 		/* Reset timer interrupts */
    186  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    187  1.20   rumble 		    (TIMER_SEL0 | TIMER_16BIT | TIMER_SWSTROBE));
    188  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    189  1.20   rumble 		    (TIMER_SEL1 | TIMER_16BIT | TIMER_SWSTROBE));
    190  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    191  1.20   rumble 		    (TIMER_SEL2 | TIMER_16BIT | TIMER_SWSTROBE));
    192  1.20   rumble 		wbflush();
    193  1.20   rumble 		delay(4);
    194  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CLEAR, 0x03);
    195  1.20   rumble 
    196  1.20   rumble 		if (mach_type == MACH_SGI_IP12) {
    197  1.20   rumble 			platform.intr_establish = int2_intr_establish;
    198  1.20   rumble 			platform.intr1 = int2_local0_intr;
    199  1.20   rumble 			platform.intr2 = int2_local1_intr;
    200  1.20   rumble 			platform.intr3 = int_8254_intr0;
    201  1.20   rumble 			platform.intr4 = int_8254_intr1;
    202  1.20   rumble 			int_8254_cal();
    203  1.20   rumble 		} else {
    204  1.20   rumble 			platform.intr_establish = int2_intr_establish;
    205  1.20   rumble 			platform.intr0 = int2_local0_intr;
    206  1.20   rumble 			platform.intr1 = int2_local1_intr;
    207  1.20   rumble #ifdef MIPS3
    208  1.20   rumble 			curcpu()->ci_cpu_freq = int2_cpu_freq(self);
    209  1.20   rumble #endif
    210  1.19  tsutsui 		}
    211  1.20   rumble 		break;
    212   1.1   sekiya 
    213  1.19  tsutsui 	default:
    214  1.19  tsutsui 		panic("int0: unsupported machine type %i\n", mach_type);
    215   1.1   sekiya 	}
    216   1.1   sekiya 
    217   1.1   sekiya 	curcpu()->ci_cycles_per_hz = curcpu()->ci_cpu_freq / (2 * hz);
    218   1.1   sekiya 	curcpu()->ci_divisor_delay = curcpu()->ci_cpu_freq / (2 * 1000000);
    219   1.1   sekiya 
    220   1.1   sekiya 	if (mach_type == MACH_SGI_IP22) {
    221   1.1   sekiya 		/* Wire interrupts 7, 11 to mappable interrupt 0,1 handlers */
    222  1.20   rumble 		intrtab[7].ih_fun = int2_mappable_intr;
    223   1.1   sekiya 		intrtab[7].ih_arg = (void*) 0;
    224   1.1   sekiya 
    225  1.20   rumble 		intrtab[11].ih_fun = int2_mappable_intr;
    226   1.1   sekiya 		intrtab[11].ih_arg = (void*) 1;
    227   1.1   sekiya 	}
    228   1.1   sekiya }
    229   1.1   sekiya 
    230   1.1   sekiya int
    231  1.20   rumble int2_mappable_intr(void *arg)
    232   1.1   sekiya {
    233   1.1   sekiya 	int i;
    234   1.1   sekiya 	int ret;
    235   1.1   sekiya 	int intnum;
    236  1.19  tsutsui 	uint32_t mstat;
    237  1.19  tsutsui 	uint32_t mmask;
    238  1.21     matt 	int which = (intptr_t)arg;
    239   1.8   sekiya 	struct sgimips_intrhand *ih;
    240   1.1   sekiya 
    241   1.1   sekiya 	ret = 0;
    242  1.20   rumble 	mstat = bus_space_read_1(iot, ioh, INT2_MAP_STATUS);
    243  1.20   rumble 	mmask = bus_space_read_1(iot, ioh, INT2_MAP_MASK0 + (which << 2));
    244   1.1   sekiya 
    245   1.1   sekiya 	mstat &= mmask;
    246   1.1   sekiya 
    247   1.1   sekiya 	for (i = 0; i < 8; i++) {
    248   1.1   sekiya 		intnum = i + 16 + (which << 3);
    249   1.1   sekiya 		if (mstat & (1 << i)) {
    250   1.8   sekiya 			for (ih = &intrtab[intnum]; ih != NULL;
    251  1.19  tsutsui 			    ih = ih->ih_next) {
    252   1.8   sekiya 				if (ih->ih_fun != NULL)
    253   1.8   sekiya 					ret |= (ih->ih_fun)(ih->ih_arg);
    254   1.8   sekiya 				else
    255   1.8   sekiya 					printf("int0: unexpected mapped "
    256   1.8   sekiya 					       "interrupt %d\n", intnum);
    257   1.8   sekiya 			}
    258   1.1   sekiya 		}
    259   1.1   sekiya 	}
    260   1.1   sekiya 
    261   1.1   sekiya 	return ret;
    262   1.1   sekiya }
    263   1.1   sekiya 
    264  1.20   rumble static void
    265  1.20   rumble int1_local_intr(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipend)
    266  1.20   rumble {
    267  1.20   rumble 	int i;
    268  1.20   rumble 	uint16_t stat;
    269  1.20   rumble 	uint8_t  mask;
    270  1.20   rumble 	struct sgimips_intrhand *ih;
    271  1.20   rumble 
    272  1.20   rumble 	stat = bus_space_read_2(iot, ioh, INT1_LOCAL_STATUS);
    273  1.20   rumble 	mask = bus_space_read_1(iot, ioh, INT1_LOCAL_MASK);
    274  1.20   rumble 
    275  1.20   rumble 	/* for STATUS, a 0 bit means interrupt is pending */
    276  1.20   rumble 	stat = ~stat & mask;
    277  1.20   rumble 
    278  1.20   rumble 	for (i = 0; i < 16; i++) {
    279  1.20   rumble 		if (stat & (1 << i)) {
    280  1.20   rumble 			for (ih = &intrtab[i]; ih != NULL; ih = ih->ih_next) {
    281  1.20   rumble 				if (ih->ih_fun != NULL)
    282  1.20   rumble 					(ih->ih_fun)(ih->ih_arg);
    283  1.20   rumble 				else
    284  1.20   rumble 					printf("int0: unexpected local "
    285  1.20   rumble 					       "interrupt %d\n", i);
    286  1.20   rumble 			}
    287  1.20   rumble 		}
    288  1.20   rumble 	}
    289  1.20   rumble }
    290  1.20   rumble 
    291   1.1   sekiya void
    292  1.20   rumble int2_local0_intr(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipend)
    293   1.1   sekiya {
    294   1.1   sekiya 	int i;
    295  1.19  tsutsui 	uint32_t l0stat;
    296  1.19  tsutsui 	uint32_t l0mask;
    297   1.8   sekiya 	struct sgimips_intrhand *ih;
    298   1.1   sekiya 
    299  1.20   rumble 	l0stat = bus_space_read_1(iot, ioh, INT2_LOCAL0_STATUS);
    300  1.20   rumble 	l0mask = bus_space_read_1(iot, ioh, INT2_LOCAL0_MASK);
    301   1.1   sekiya 
    302  1.12   rumble 	l0stat &= l0mask;
    303   1.1   sekiya 
    304   1.1   sekiya 	for (i = 0; i < 8; i++) {
    305  1.12   rumble 		if (l0stat & (1 << i)) {
    306   1.8   sekiya 			for (ih = &intrtab[i]; ih != NULL; ih = ih->ih_next) {
    307   1.8   sekiya 				if (ih->ih_fun != NULL)
    308   1.8   sekiya 					(ih->ih_fun)(ih->ih_arg);
    309   1.8   sekiya 				else
    310   1.8   sekiya 					printf("int0: unexpected local0 "
    311   1.8   sekiya 					       "interrupt %d\n", i);
    312   1.8   sekiya 			}
    313   1.1   sekiya 		}
    314   1.1   sekiya 	}
    315   1.1   sekiya }
    316   1.1   sekiya 
    317   1.1   sekiya void
    318  1.20   rumble int2_local1_intr(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipend)
    319   1.1   sekiya {
    320   1.1   sekiya 	int i;
    321  1.19  tsutsui 	uint32_t l1stat;
    322  1.19  tsutsui 	uint32_t l1mask;
    323   1.8   sekiya 	struct sgimips_intrhand *ih;
    324   1.1   sekiya 
    325  1.20   rumble 	l1stat = bus_space_read_1(iot, ioh, INT2_LOCAL1_STATUS);
    326  1.20   rumble 	l1mask = bus_space_read_1(iot, ioh, INT2_LOCAL1_MASK);
    327   1.1   sekiya 
    328   1.1   sekiya 	l1stat &= l1mask;
    329   1.1   sekiya 
    330   1.1   sekiya 	for (i = 0; i < 8; i++) {
    331   1.1   sekiya 		if (l1stat & (1 << i)) {
    332   1.8   sekiya 			for (ih = &intrtab[8+i]; ih != NULL; ih = ih->ih_next) {
    333   1.8   sekiya 				if (ih->ih_fun != NULL)
    334   1.8   sekiya 					(ih->ih_fun)(ih->ih_arg);
    335   1.8   sekiya 				else
    336   1.8   sekiya 					printf("int0: unexpected local1 "
    337   1.8   sekiya 					       " interrupt %x\n", 8 + i);
    338   1.8   sekiya 			}
    339   1.1   sekiya 		}
    340   1.1   sekiya 	}
    341   1.1   sekiya }
    342   1.1   sekiya 
    343   1.1   sekiya void *
    344  1.20   rumble int1_intr_establish(int level, int ipl, int (*handler) (void *), void *arg)
    345  1.20   rumble {
    346  1.20   rumble 	uint8_t mask;
    347  1.20   rumble 
    348  1.20   rumble 	if (level < 0 || level >= NINTR)
    349  1.20   rumble 		panic("invalid interrupt level");
    350  1.20   rumble 
    351  1.20   rumble 	if (intrtab[level].ih_fun == NULL) {
    352  1.20   rumble 		intrtab[level].ih_fun = handler;
    353  1.20   rumble 		intrtab[level].ih_arg = arg;
    354  1.20   rumble 		intrtab[level].ih_next = NULL;
    355  1.20   rumble 	} else {
    356  1.20   rumble 		struct sgimips_intrhand *n, *ih;
    357  1.20   rumble 
    358  1.20   rumble 		ih = malloc(sizeof *ih, M_DEVBUF, M_NOWAIT);
    359  1.20   rumble 		if (ih == NULL) {
    360  1.20   rumble 			printf("int0: can't allocate handler\n");
    361  1.20   rumble 			return (void *)NULL;
    362  1.20   rumble 		}
    363  1.20   rumble 
    364  1.20   rumble 		ih->ih_fun = handler;
    365  1.20   rumble 		ih->ih_arg = arg;
    366  1.20   rumble 		ih->ih_next = NULL;
    367  1.20   rumble 
    368  1.20   rumble 		for (n = &intrtab[level]; n->ih_next != NULL; n = n->ih_next)
    369  1.20   rumble 			;
    370  1.20   rumble 
    371  1.20   rumble 		n->ih_next = ih;
    372  1.20   rumble 
    373  1.20   rumble 		return NULL;	/* vector already set */
    374  1.20   rumble 	}
    375  1.20   rumble 
    376  1.20   rumble 	if (level < 8) {
    377  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT1_LOCAL_MASK);
    378  1.20   rumble 		mask |= (1 << level);
    379  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_LOCAL_MASK, mask);
    380  1.20   rumble 	} else {
    381  1.20   rumble 		printf("int0: level >= 16 (%d)\n", level);
    382  1.20   rumble 	}
    383  1.20   rumble 
    384  1.20   rumble 	return NULL;
    385  1.20   rumble }
    386  1.20   rumble 
    387  1.20   rumble void *
    388  1.20   rumble int2_intr_establish(int level, int ipl, int (*handler) (void *), void *arg)
    389   1.1   sekiya {
    390  1.19  tsutsui 	uint32_t mask;
    391   1.1   sekiya 
    392   1.1   sekiya 	if (level < 0 || level >= NINTR)
    393   1.1   sekiya 		panic("invalid interrupt level");
    394   1.1   sekiya 
    395   1.8   sekiya 	if (intrtab[level].ih_fun == NULL) {
    396   1.8   sekiya 		intrtab[level].ih_fun = handler;
    397   1.8   sekiya 		intrtab[level].ih_arg = arg;
    398   1.8   sekiya 		intrtab[level].ih_next = NULL;
    399   1.8   sekiya 	} else {
    400  1.19  tsutsui 		struct sgimips_intrhand *n, *ih;
    401   1.8   sekiya 
    402  1.19  tsutsui 		ih = malloc(sizeof *ih, M_DEVBUF, M_NOWAIT);
    403   1.8   sekiya 		if (ih == NULL) {
    404  1.20   rumble 			printf("int0: can't allocate handler\n");
    405  1.19  tsutsui 			return NULL;
    406   1.8   sekiya 		}
    407   1.8   sekiya 
    408   1.8   sekiya 		ih->ih_fun = handler;
    409   1.8   sekiya 		ih->ih_arg = arg;
    410   1.8   sekiya 		ih->ih_next = NULL;
    411   1.8   sekiya 
    412   1.8   sekiya 		for (n = &intrtab[level]; n->ih_next != NULL; n = n->ih_next)
    413  1.10  tsutsui 			;
    414  1.10  tsutsui 
    415   1.8   sekiya 		n->ih_next = ih;
    416   1.8   sekiya 
    417  1.19  tsutsui 		return NULL;	/* vector already set */
    418   1.1   sekiya 	}
    419   1.1   sekiya 
    420   1.1   sekiya 	if (level < 8) {
    421  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_LOCAL0_MASK);
    422   1.1   sekiya 		mask |= (1 << level);
    423  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL0_MASK, mask);
    424   1.1   sekiya 	} else if (level < 16) {
    425  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_LOCAL1_MASK);
    426   1.1   sekiya 		mask |= (1 << (level - 8));
    427  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL1_MASK, mask);
    428   1.1   sekiya 	} else if (level < 24) {
    429   1.1   sekiya 		/* Map0 interrupt maps to l0 bit 7, so turn that on too */
    430  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_LOCAL0_MASK);
    431   1.1   sekiya 		mask |= (1 << 7);
    432  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL0_MASK, mask);
    433   1.1   sekiya 
    434  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_MAP_MASK0);
    435   1.1   sekiya 		mask |= (1 << (level - 16));
    436  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_MAP_MASK0, mask);
    437   1.1   sekiya 	} else {
    438   1.1   sekiya 		/* Map1 interrupt maps to l1 bit 3, so turn that on too */
    439  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_LOCAL1_MASK);
    440   1.1   sekiya 		mask |= (1 << 3);
    441  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_LOCAL1_MASK, mask);
    442   1.1   sekiya 
    443  1.20   rumble 		mask = bus_space_read_1(iot, ioh, INT2_MAP_MASK1);
    444   1.1   sekiya 		mask |= (1 << (level - 24));
    445  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_MAP_MASK1, mask);
    446   1.1   sekiya 	}
    447   1.1   sekiya 
    448  1.19  tsutsui 	return NULL;
    449   1.1   sekiya }
    450   1.1   sekiya 
    451   1.4    pooka #ifdef MIPS3
    452  1.13   rumble static u_long
    453  1.20   rumble int2_cpu_freq(struct device *self)
    454  1.20   rumble {
    455  1.20   rumble 	int i;
    456  1.20   rumble 	unsigned long cps;
    457  1.20   rumble 	unsigned long ctrdiff[3];
    458  1.20   rumble 
    459  1.20   rumble 	/* calibrate timer */
    460  1.20   rumble 	int2_cal_timer();
    461  1.20   rumble 
    462  1.20   rumble 	cps = 0;
    463  1.20   rumble 	for (i = 0;
    464  1.20   rumble 	    i < sizeof(ctrdiff) / sizeof(ctrdiff[0]); i++) {
    465  1.20   rumble 		do {
    466  1.20   rumble 			ctrdiff[i] = int2_cal_timer();
    467  1.20   rumble 		} while (ctrdiff[i] == 0);
    468  1.20   rumble 
    469  1.20   rumble 		cps += ctrdiff[i];
    470  1.20   rumble 	}
    471  1.20   rumble 
    472  1.20   rumble 	cps = cps / (sizeof(ctrdiff) / sizeof(ctrdiff[0]));
    473  1.20   rumble 
    474  1.20   rumble 	printf("%s: bus %luMHz, CPU %luMHz\n",
    475  1.20   rumble 	    self->dv_xname, cps / 10000, cps / 5000);
    476  1.20   rumble 
    477  1.20   rumble 	/* R4k/R4400/R4600/R5k count at half CPU frequency */
    478  1.20   rumble 	return (2 * cps * hz);
    479  1.20   rumble }
    480  1.20   rumble 
    481  1.20   rumble static u_long
    482  1.20   rumble int2_cal_timer(void)
    483   1.1   sekiya {
    484   1.1   sekiya 	int s;
    485   1.1   sekiya 	int roundtime;
    486   1.1   sekiya 	int sampletime;
    487   1.1   sekiya 	int startmsb, lsb, msb;
    488   1.1   sekiya 	unsigned long startctr, endctr;
    489   1.1   sekiya 
    490   1.1   sekiya 	/*
    491   1.1   sekiya 	 * NOTE: HZ must be greater than 15 for this to work, as otherwise
    492  1.20   rumble 	 * we'll overflow the counter.  We round the answer to nearest 1
    493   1.1   sekiya 	 * MHz of the master (2x) clock.
    494   1.1   sekiya 	 */
    495   1.1   sekiya 	roundtime = (1000000 / hz) / 2;
    496   1.1   sekiya 	sampletime = (1000000 / hz) + 0xff;
    497   1.1   sekiya 	startmsb = (sampletime >> 8);
    498   1.1   sekiya 
    499   1.1   sekiya 	s = splhigh();
    500   1.1   sekiya 
    501  1.20   rumble 	bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    502  1.19  tsutsui 	    (TIMER_SEL2 | TIMER_16BIT | TIMER_RATEGEN));
    503  1.20   rumble 	bus_space_write_1(iot, ioh, INT2_TIMER_2, (sampletime & 0xff));
    504  1.20   rumble 	bus_space_write_1(iot, ioh, INT2_TIMER_2, (sampletime >> 8));
    505   1.1   sekiya 
    506   1.1   sekiya 	startctr = mips3_cp0_count_read();
    507   1.1   sekiya 
    508   1.1   sekiya 	/* Wait for the MSB to count down to zero */
    509   1.1   sekiya 	do {
    510  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL, TIMER_SEL2);
    511  1.20   rumble 		lsb = bus_space_read_1(iot, ioh, INT2_TIMER_2) & 0xff;
    512  1.20   rumble 		msb = bus_space_read_1(iot, ioh, INT2_TIMER_2) & 0xff;
    513   1.1   sekiya 
    514   1.1   sekiya 		endctr = mips3_cp0_count_read();
    515   1.1   sekiya 	} while (msb);
    516   1.1   sekiya 
    517   1.1   sekiya 	/* Turn off timer */
    518  1.20   rumble 	bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    519  1.19  tsutsui 	    (TIMER_SEL2 | TIMER_16BIT | TIMER_SWSTROBE));
    520   1.1   sekiya 
    521   1.1   sekiya 	splx(s);
    522   1.1   sekiya 
    523   1.1   sekiya 	return (endctr - startctr) / roundtime * roundtime;
    524   1.1   sekiya }
    525   1.4    pooka #endif /* MIPS3 */
    526   1.1   sekiya 
    527  1.14   rumble /*
    528  1.20   rumble  * A master clock is wired to TIMER_2, which in turn clocks the two other
    529  1.20   rumble  * timers. The master frequencies are as follows:
    530  1.20   rumble  *     IP6,  IP10:		3.6864MHz
    531  1.20   rumble  *     IP12, IP20, IP22:	1MHz
    532  1.20   rumble  *     IP17:			10MHz
    533  1.14   rumble  *
    534  1.20   rumble  * TIMER_0 and TIMER_1 interrupts are tied to MIPS interrupts as follows:
    535  1.20   rumble  *     IP6,  IP10:		TIMER_0: INT2, TIMER_1: INT4
    536  1.20   rumble  *     IP12:			TIMER_0: INT3, TIMER_1: INT4
    537  1.20   rumble  *     IP17, IP20, IP22:	TIMER_0: INT2, TIMER_1: INT3
    538  1.20   rumble  *
    539  1.20   rumble  * NB: Apparently int2 doesn't like counting down from one, but two works.
    540  1.14   rumble  */
    541   1.1   sekiya void
    542   1.1   sekiya int_8254_cal(void)
    543   1.1   sekiya {
    544  1.20   rumble 	bus_size_t timer_control, timer_0, timer_1, timer_2;
    545   1.1   sekiya 	int s;
    546   1.1   sekiya 
    547  1.20   rumble 	switch (mach_type) {
    548  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    549  1.20   rumble 		int_8254_timecounter.tc_frequency = 3686400 / 8;
    550  1.20   rumble 		timer_control	= INT1_TIMER_CONTROL;
    551  1.20   rumble 		timer_0		= INT1_TIMER_0;
    552  1.20   rumble 		timer_1		= INT1_TIMER_1;
    553  1.20   rumble 		timer_2		= INT1_TIMER_2;
    554  1.20   rumble 		break;
    555  1.20   rumble 
    556  1.20   rumble 	case MACH_SGI_IP12:
    557  1.20   rumble 		int_8254_timecounter.tc_frequency = 1000000 / 8;
    558  1.20   rumble 		timer_control	= INT2_TIMER_CONTROL;
    559  1.20   rumble 		timer_0		= INT2_TIMER_0;
    560  1.20   rumble 		timer_1		= INT2_TIMER_1;
    561  1.20   rumble 		timer_2		= INT2_TIMER_2;
    562  1.20   rumble 		break;
    563  1.20   rumble 
    564  1.20   rumble 	default:
    565  1.20   rumble 		panic("int_8254_cal");
    566  1.20   rumble 	}
    567  1.20   rumble 
    568   1.1   sekiya 	s = splhigh();
    569   1.1   sekiya 
    570  1.20   rumble 	/* Timer0 is our hz. */
    571  1.20   rumble 	bus_space_write_1(iot, ioh, timer_control,
    572  1.20   rumble 	    TIMER_SEL0 | TIMER_RATEGEN | TIMER_16BIT);
    573  1.20   rumble 	bus_space_write_1(iot, ioh, timer_0,
    574  1.20   rumble 	    (int_8254_timecounter.tc_frequency / hz) % 256);
    575  1.14   rumble 	wbflush();
    576  1.14   rumble 	delay(4);
    577  1.20   rumble 	bus_space_write_1(iot, ioh, timer_0,
    578  1.20   rumble 	    (int_8254_timecounter.tc_frequency / hz) / 256);
    579  1.14   rumble 
    580  1.20   rumble 	/* Timer1 is for timecounting. */
    581  1.20   rumble 	bus_space_write_1(iot, ioh, timer_control,
    582  1.20   rumble 	    TIMER_SEL1 | TIMER_RATEGEN | TIMER_16BIT);
    583  1.20   rumble 	bus_space_write_1(iot, ioh, timer_1, 0xff);
    584   1.1   sekiya 	wbflush();
    585   1.1   sekiya 	delay(4);
    586  1.20   rumble 	bus_space_write_1(iot, ioh, timer_1, 0xff);
    587   1.1   sekiya 
    588  1.20   rumble 	/* Timer2 clocks timer0 and timer1. */
    589  1.20   rumble 	bus_space_write_1(iot, ioh, timer_control,
    590  1.20   rumble 	    TIMER_SEL2 | TIMER_RATEGEN | TIMER_16BIT);
    591  1.20   rumble 	bus_space_write_1(iot, ioh, timer_2, 8);
    592   1.1   sekiya 	wbflush();
    593   1.1   sekiya 	delay(4);
    594  1.20   rumble 	bus_space_write_1(iot, ioh, timer_2, 0);
    595  1.14   rumble 
    596  1.14   rumble 	splx(s);
    597  1.20   rumble 
    598  1.20   rumble 	tc_init(&int_8254_timecounter);
    599  1.14   rumble }
    600  1.14   rumble 
    601  1.14   rumble static u_int
    602  1.14   rumble int_8254_get_timecount(struct timecounter *tc)
    603  1.14   rumble {
    604  1.14   rumble 	int s;
    605  1.14   rumble 	u_int count;
    606  1.20   rumble 	u_char lo, hi;
    607  1.14   rumble 
    608  1.14   rumble 	s = splhigh();
    609  1.14   rumble 
    610  1.20   rumble 	switch (mach_type) {
    611  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    612  1.20   rumble 		bus_space_write_1(iot, ioh, INT1_TIMER_CONTROL,
    613  1.20   rumble 		    TIMER_SEL1 | TIMER_LATCH);
    614  1.20   rumble 		lo = bus_space_read_1(iot, ioh, INT1_TIMER_1);
    615  1.20   rumble 		hi = bus_space_read_1(iot, ioh, INT1_TIMER_1);
    616  1.20   rumble 		break;
    617  1.20   rumble 
    618  1.20   rumble 	case MACH_SGI_IP12:
    619  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CONTROL,
    620  1.20   rumble 		    TIMER_SEL1 | TIMER_LATCH);
    621  1.20   rumble 		lo = bus_space_read_1(iot, ioh, INT2_TIMER_1);
    622  1.20   rumble 		hi = bus_space_read_1(iot, ioh, INT2_TIMER_1);
    623  1.20   rumble 		break;
    624  1.20   rumble 
    625  1.20   rumble 	default:
    626  1.20   rumble 		panic("int_8254_get_timecount");
    627  1.20   rumble 	}
    628  1.20   rumble 
    629  1.14   rumble 	count = 0xffff - ((hi << 8) | lo);
    630  1.14   rumble 	splx(s);
    631  1.14   rumble 
    632  1.20   rumble 	return (int_8254_tc_count + count);
    633  1.14   rumble }
    634  1.14   rumble 
    635  1.14   rumble static void
    636  1.20   rumble int_8254_intr0(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipend)
    637  1.15   rumble {
    638  1.15   rumble 	struct clockframe cf;
    639  1.15   rumble 
    640  1.15   rumble 	cf.pc = pc;
    641  1.15   rumble 	cf.sr = status;
    642  1.15   rumble 
    643  1.15   rumble 	hardclock(&cf);
    644  1.15   rumble 
    645  1.20   rumble 	switch (mach_type) {
    646  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    647  1.20   rumble 		bus_space_read_1(iot, ioh, INT1_TIMER_0_ACK);
    648  1.20   rumble 		break;
    649  1.20   rumble 
    650  1.20   rumble 	case MACH_SGI_IP12:
    651  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CLEAR, 0x01);
    652  1.20   rumble 		break;
    653  1.20   rumble 
    654  1.20   rumble 	default:
    655  1.20   rumble 		panic("int_8254_intr0");
    656  1.20   rumble 	}
    657  1.15   rumble }
    658  1.15   rumble 
    659  1.15   rumble static void
    660  1.20   rumble int_8254_intr1(uint32_t status, uint32_t cause, uint32_t pc, uint32_t ipend)
    661  1.14   rumble {
    662  1.14   rumble 	int s;
    663  1.14   rumble 
    664  1.14   rumble 	s = splhigh();
    665  1.14   rumble 
    666  1.14   rumble 	int_8254_tc_count += 0xffff;
    667  1.20   rumble 	switch (mach_type) {
    668  1.20   rumble 	case MACH_SGI_IP6 | MACH_SGI_IP10:
    669  1.20   rumble 		bus_space_read_1(iot, ioh, INT1_TIMER_1_ACK);
    670  1.20   rumble 		break;
    671  1.20   rumble 
    672  1.20   rumble 	case MACH_SGI_IP12:
    673  1.20   rumble 		bus_space_write_1(iot, ioh, INT2_TIMER_CLEAR, 0x02);
    674  1.20   rumble 		break;
    675  1.20   rumble 
    676  1.20   rumble 	default:
    677  1.20   rumble 		panic("int_8254_intr1");
    678  1.20   rumble 	}
    679  1.14   rumble 
    680   1.1   sekiya 	splx(s);
    681   1.1   sekiya }
    682   1.3   sekiya 
    683   1.3   sekiya void
    684  1.19  tsutsui int2_wait_fifo(uint32_t flag)
    685   1.3   sekiya {
    686  1.19  tsutsui 
    687   1.8   sekiya 	if (ioh == 0)
    688   1.8   sekiya 		delay(5000);
    689   1.8   sekiya 	else
    690  1.20   rumble 		while (bus_space_read_1(iot, ioh, INT2_LOCAL0_STATUS) & flag)
    691   1.8   sekiya 			;
    692   1.3   sekiya }
    693