xref: /src/sys/arch/sgimips/hpc/sqvar.h

/*	$NetBSD: sqvar.h,v 1.3 2002/03/13 13:12:28 simonb Exp $	*/

/*
 * Copyright (c) 2001 Rafal K. Boni
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _ARCH_SGIMIPS_HPC_SQVAR_H_
#define	_ARCH_SGIMIPS_HPC_SQVAR_H_

#include "rnd.h"

#include <sys/queue.h>
#include <sys/callout.h>

#if NRND > 0
#include <sys/rnd.h>
#endif

#include <sgimips/hpc/hpcvar.h>
#include <sgimips/hpc/hpcreg.h>

/* Note, these must be powers of two for the magic NEXT/PREV macros to work */
#define SQ_NRXDESC		32
#define SQ_NTXDESC		16

#define	SQ_NRXDESC_MASK		(SQ_NRXDESC - 1)
#define	SQ_NEXTRX(x)		((x + 1) & SQ_NRXDESC_MASK)
#define	SQ_PREVRX(x)		((x - 1) & SQ_NRXDESC_MASK)

#define	SQ_NTXDESC_MASK		(SQ_NTXDESC - 1)
#define	SQ_NEXTTX(x)		((x + 1) & SQ_NTXDESC_MASK)
#define	SQ_PREVTX(x)		((x - 1) & SQ_NTXDESC_MASK)

/*
 * We pack all DMA control structures into one container so we can alloc just
 * one chunk of DMA-safe memory and pack them into it.  Otherwise, we'd have to
 * allocate a page for each descriptor, since the bus_dmamem_alloc() interface
 * does not allow us to allocate smaller chunks.
 */
struct sq_control {
	/* Receive descriptors */
	struct hpc_dma_desc	rx_desc[SQ_NRXDESC];

	/* Transmit descriptors */
	struct hpc_dma_desc	tx_desc[SQ_NTXDESC];
};

#define	SQ_CDOFF(x)		offsetof(struct sq_control, x)
#define	SQ_CDTXOFF(x)		SQ_CDOFF(tx_desc[(x)])
#define	SQ_CDRXOFF(x)		SQ_CDOFF(rx_desc[(x)])

#define	SQ_TYPE_8003		0
#define	SQ_TYPE_80C03		1

struct sq_softc {
	struct device 		sc_dev;

	/* HPC registers */
	bus_space_tag_t 	sc_hpct;
	bus_space_handle_t 	sc_hpch;


	/* HPC external ethernet registers: aka Seeq 8003 registers */
	bus_space_tag_t 	sc_regt;
	bus_space_handle_t 	sc_regh;

	bus_dma_tag_t 		sc_dmat;

	struct ethercom 	sc_ethercom;
	unsigned char 		sc_enaddr[ETHER_ADDR_LEN];

	int			sc_type;

	struct sq_control*	sc_control;
#define	sc_rxdesc		sc_control->rx_desc
#define	sc_txdesc		sc_control->tx_desc

	/* DMA structures for control data (DMA RX/TX descriptors) */
	int			sc_ncdseg;
	bus_dma_segment_t	sc_cdseg;
	bus_dmamap_t		sc_cdmap;
#define	sc_cddma		sc_cdmap->dm_segs[0].ds_addr

	int			sc_nextrx;

	/* DMA structures for RX packet data */
	bus_dma_segment_t	sc_rxseg[SQ_NRXDESC];
	bus_dmamap_t		sc_rxmap[SQ_NRXDESC];
	struct mbuf*		sc_rxmbuf[SQ_NRXDESC];

	int			sc_nexttx;
	int			sc_prevtx;
	int			sc_nfreetx;

	/* DMA structures for TX packet data */
	bus_dma_segment_t	sc_txseg[SQ_NTXDESC];
	bus_dmamap_t		sc_txmap[SQ_NTXDESC];
	struct mbuf*		sc_txmbuf[SQ_NTXDESC];

	u_int8_t		sc_rxcmd;	/* prototype rxcmd */

#if NRND > 0
	rndsource_element_t 	rnd_source;	/* random source */
#endif
};

#define	SQ_CDTXADDR(sc, x)	((sc)->sc_cddma + SQ_CDTXOFF((x)))
#define	SQ_CDRXADDR(sc, x)	((sc)->sc_cddma + SQ_CDRXOFF((x)))

#define	SQ_CDTXSYNC(sc, x, n, ops)					\
do {									\
	int __x, __n;							\
									\
	__x = (x);							\
	__n = (n);							\
									\
	/* If it will wrap around, sync to the end of the ring. */	\
	if ((__x + __n) > SQ_NTXDESC) {					\
		bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cdmap,		\
		    SQ_CDTXOFF(__x), sizeof(struct hpc_dma_desc) *	\
		    (SQ_NTXDESC - __x), (ops));				\
		__n -= (SQ_NTXDESC - __x);				\
		__x = 0;						\
	}								\
									\
	/* Now sync whatever is left. */				\
	bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cdmap,			\
	    SQ_CDTXOFF(__x), sizeof(struct hpc_dma_desc) * __n, (ops));	\
} while (0)

#define	SQ_CDRXSYNC(sc, x, ops)						\
	bus_dmamap_sync((sc)->sc_dmat, (sc)->sc_cdmap,			\
	    SQ_CDRXOFF((x)), sizeof(struct hpc_dma_desc), (ops))

#define	SQ_INIT_RXDESC(sc, x)						\
do {									\
	struct hpc_dma_desc* __rxd = &(sc)->sc_rxdesc[(x)];		\
	struct mbuf *__m = (sc)->sc_rxmbuf[(x)];			\
									\
	__m->m_data = __m->m_ext.ext_buf;				\
	__rxd->hdd_bufptr = (sc)->sc_rxmap[(x)]->dm_segs[0].ds_addr;	\
	__rxd->hdd_descptr = SQ_CDRXADDR((sc), SQ_NEXTRX((x)));		\
	__rxd->hdd_ctl = 						\
		__m->m_ext.ext_size | HDD_CTL_INTR | HDD_CTL_EOPACKET | \
		HDD_CTL_OWN | ((x) == (SQ_NRXDESC  - 1) ? 		\
						HDD_CTL_EOCHAIN : 0);	\
	SQ_CDRXSYNC((sc), (x), BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);\
} while (0)

#endif	/* _ARCH_SGIMIPS_HPC_SQVAR_H_ */