Makefile revision 1.12.6.2
1 1.12.6.2 skrll # $NetBSD: Makefile,v 1.12.6.2 2017/08/28 17:51:51 skrll Exp $ 2 1.1 sekiya 3 1.1 sekiya PROG= ip30boot 4 1.9 joerg NOMAN= # defined 5 1.1 sekiya 6 1.10 matt SRCS= start.S boot.c bootinfo.c conf.c devopen.c putchar.c getchar.c \ 7 1.10 matt getopt.c disk.c arcbios_calls.S 8 1.10 matt 9 1.1 sekiya 10 1.1 sekiya CLEANFILES+= boot.map 11 1.1 sekiya 12 1.12.6.1 skrll .include <bsd.init.mk> 13 1.1 sekiya 14 1.1 sekiya # $S must correspond to the top of the 'sys' tree 15 1.1 sekiya S= ${.CURDIR}/../../../.. 16 1.1 sekiya 17 1.1 sekiya BINMODE?= 444 18 1.1 sekiya 19 1.1 sekiya realall: ${PROG} 20 1.1 sekiya 21 1.1 sekiya .PATH: ${.CURDIR}/../common 22 1.10 matt .PATH.S: ${S}/dev/arcbios 23 1.1 sekiya AFLAGS+= -D_LOCORE -D_KERNEL -mno-abicalls -mabi=64 -D_LP64 24 1.1 sekiya CPPFLAGS+= -nostdinc -D_STANDALONE -DNO_ABICALLS -I${.OBJDIR} -I${S} 25 1.1 sekiya # compiler flags for smallest code size 26 1.1 sekiya CFLAGS= -ffreestanding -Os -Wall -Werror -mno-abicalls -msoft-float -G 1024 -mabi=64 -D_LP64 27 1.1 sekiya LDBUG= -T $S/arch/mips/conf/stand.ldscript 28 1.1 sekiya NETBSD_VERS!= ${HOST_SH} ${.CURDIR}/../../../../conf/osrelease.sh 29 1.1 sekiya CPPFLAGS+= -DNETBSD_VERS='"${NETBSD_VERS}"' 30 1.1 sekiya 31 1.1 sekiya CPPFLAGS+= -Dsgimips 32 1.1 sekiya 33 1.11 matt LDFLAGS+= -m elf64btsmip 34 1.11 matt LINKFORMAT+= -m elf64btsmip 35 1.10 matt 36 1.10 matt .include "${S}/dev/arcbios/Makefile.inc" 37 1.10 matt 38 1.1 sekiya # We load the kernel at 420K in from the start of RAM to give the boot 39 1.1 sekiya # loader plenty of breathing room. Load the boot loader starting at 40 1.1 sekiya # the second page of RAM. 41 1.1 sekiya 42 1.1 sekiya LOAD_ADDRESS_IP30?= 0xa800000020080000 43 1.1 sekiya 44 1.1 sekiya ### find out what to use for libkern 45 1.1 sekiya KERN_AS= library 46 1.2 skrll KERNMISCMAKEFLAGS+= LD="${LD} -m elf64btsmip" RANLIB="true" 47 1.1 sekiya .include "${S}/lib/libkern/Makefile.inc" 48 1.1 sekiya LIBKERN= ${KERNLIB} 49 1.1 sekiya 50 1.1 sekiya ### find out what to use for libz 51 1.1 sekiya Z_AS= library 52 1.2 skrll ZMISCMAKEFLAGS+= LD="${LD} -m elf64btsmip" RANLIB="true" 53 1.1 sekiya .include "${S}/lib/libz/Makefile.inc" 54 1.1 sekiya LIBZ= ${ZLIB} 55 1.1 sekiya 56 1.1 sekiya ### find out what to use for libsa 57 1.1 sekiya SA_AS= library 58 1.1 sekiya SAMISCMAKEFLAGS+= SA_USE_LOADFILE=yes SA_USE_CREAD=yes \ 59 1.2 skrll LD="${LD} -m elf64btsmip" RANLIB="true" 60 1.1 sekiya .include "${S}/lib/libsa/Makefile.inc" 61 1.1 sekiya LIBSA= ${SALIB} 62 1.1 sekiya 63 1.1 sekiya 64 1.1 sekiya LIBS= ${LIBSA} ${LIBZ} ${LIBSA} ${LIBKERN} 65 1.1 sekiya 66 1.1 sekiya ip30boot: ${OBJS} ${LIBS} 67 1.10 matt ${_MKTARGET_LINK} 68 1.2 skrll ${LD} -m elf64btsmip -Map boot.map -x -Ttext ${LOAD_ADDRESS_IP30} \ 69 1.4 tsutsui ${LDBUG} -e start -o ${.TARGET} ${OBJS} ${LIBS} 70 1.10 matt ${SIZE} ${.TARGET} 71 1.1 sekiya 72 1.7 dholland cleandir distclean: .WAIT cleanlibdir 73 1.6 tsutsui cleanlibdir: 74 1.6 tsutsui -rm -rf lib 75 1.6 tsutsui 76 1.12.6.2 skrll .include "${S}/conf/newvers_stand.mk" 77 1.12.6.2 skrll 78 1.6 tsutsui .include <bsd.klinks.mk> 79 1.1 sekiya .include <bsd.prog.mk> 80
Indexes created Thu Oct 30 16:09:53 GMT 2025