cpu.h revision 1.14 1 /* $NetBSD: cpu.h,v 1.14 2002/02/11 18:04:24 uch Exp $ */
2
3 /*-
4 * Copyright (c) 1990 The Regents of the University of California.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to Berkeley by
8 * William Jolitz.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 * 3. All advertising materials mentioning features or use of this software
19 * must display the following acknowledgement:
20 * This product includes software developed by the University of
21 * California, Berkeley and its contributors.
22 * 4. Neither the name of the University nor the names of its contributors
23 * may be used to endorse or promote products derived from this software
24 * without specific prior written permission.
25 *
26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
36 * SUCH DAMAGE.
37 *
38 * @(#)cpu.h 5.4 (Berkeley) 5/9/91
39 */
40
41 /*
42 * SH3 Version
43 *
44 * T.Horiuchi Brains Corp. 5/22/98
45 */
46
47 #ifndef _SH3_CPU_H_
48 #define _SH3_CPU_H_
49
50 #if defined(_KERNEL_OPT)
51 #include "opt_lockdebug.h"
52 #endif
53
54 /*
55 * Definitions unique to sh3 cpu support.
56 */
57 #include <machine/psl.h>
58 #include <machine/frame.h>
59 #include <machine/segments.h>
60
61 #include <sys/sched.h>
62 struct cpu_info {
63 struct schedstate_percpu ci_schedstate; /* scheduler state */
64 #if defined(DIAGNOSTIC) || defined(LOCKDEBUG)
65 u_long ci_spin_locks; /* # of spin locks held */
66 u_long ci_simple_locks; /* # of simple locks held */
67 #endif
68 };
69
70 #ifdef _KERNEL
71 extern struct cpu_info cpu_info_store;
72
73 #define curcpu() (&cpu_info_store)
74 #endif
75
76 /*
77 * definitions of cpu-dependent requirements
78 * referenced in generic code
79 */
80 #define cpu_swapin(p) /* nothing */
81 #define cpu_wait(p) /* nothing */
82 #define cpu_number() 0
83
84 /*
85 * Arguments to hardclock, softclock and statclock
86 * encapsulate the previous machine state in an opaque
87 * clockframe; for now, use generic intrframe.
88 *
89 * XXX intrframe has a lot of gunk we don't need.
90 */
91 #define clockframe intrframe
92
93 #define CLKF_USERMODE(frame) (!KERNELMODE((frame)->if_r15, (frame)->if_ssr))
94 #if 0
95 #define CLKF_BASEPRI(frame) ((frame)->if_pri == 0)
96 #else
97 /* XXX we should fix this */
98 #define CLKF_BASEPRI(frame) (0)
99 #endif
100 #define CLKF_PC(frame) ((frame)->if_spc)
101 #define CLKF_INTR(frame) (0) /* XXX should have an interrupt stack */
102
103 /*
104 * Preempt the current process if in interrupt from user mode,
105 * or after the current trap/syscall if in system mode.
106 */
107 int want_resched; /* resched() was called */
108 #define need_resched(ci) (want_resched = 1, setsoftast())
109
110 /*
111 * Give a profiling tick to the current process when the user profiling
112 * buffer pages are invalid. On the i386, request an ast to send us
113 * through trap(), marking the proc as needing a profiling tick.
114 */
115 #define need_proftick(p) ((p)->p_flag |= P_OWEUPC, setsoftast())
116
117 /*
118 * Notify the current process (p) that it has a signal pending,
119 * process as soon as possible.
120 */
121 #define signotify(p) setsoftast()
122
123 /*
124 * We need a machine-independent name for this.
125 */
126 #define DELAY(x) delay(x)
127 void delay __P((int));
128
129 /*
130 * Logical address space of SH3 CPU.
131 */
132 #define SH3_P0SEG_BASE 0x00000000 /* TLB mapped, also U0SEG */
133 #define SH3_P0SEG_END 0x7fffffff
134 #define SH3_P1SEG_BASE 0x80000000 /* pa == va */
135 #define SH3_P1SEG_END 0x9fffffff
136 #define SH3_P2SEG_BASE 0xa0000000 /* pa == va, non-cacheable */
137 #define SH3_P2SEG_END 0xbfffffff
138 #define SH3_P3SEG_BASE 0xc0000000 /* TLB mapped, supervisor mode */
139 #define SH3_P3SEG_END 0xdfffffff
140 #define SH3_P4SEG_BASE 0xe0000000 /* peripheral space */
141 #define SH3_P4SEG_END 0xffffffff
142
143 #define SH3_PHYS_MASK 0x1fffffff
144 #define SH3_P1234SEG_SIZE 0x20000000
145
146 #define SH3_P1SEG_TO_PHYS(x) ((unsigned)(x) & SH3_PHYS_MASK)
147 #define SH3_P2SEG_TO_PHYS(x) ((unsigned)(x) & SH3_PHYS_MASK)
148 #define SH3_PHYS_TO_P1SEG(x) ((unsigned)(x) | SH3_P1SEG_BASE)
149 #define SH3_PHYS_TO_P2SEG(x) ((unsigned)(x) | SH3_P2SEG_BASE)
150 #define SH3_P1SEG_TO_P2SEG(x) ((unsigned)(x) | SH3_P1234SEG_SIZE)
151
152 /* run on P2 */
153 #define RUN_P2 \
154 do { \
155 u_int32_t p; \
156 p = (u_int32_t)&&P2; \
157 goto *(u_int32_t *)(p | 0x20000000); \
158 P2: \
159 } while (/*CONSTCOND*/0)
160
161 /* run on P1 */
162 #define RUN_P1 \
163 do { \
164 u_int32_t p; \
165 p = (u_int32_t)&&P1; \
166 __asm__ __volatile__("nop;nop;nop;nop;nop;nop;nop;nop"); \
167 goto *(u_int32_t *)(p & ~0x20000000); \
168 P1: \
169 } while (/*CONSTCOND*/0)
170
171 /*
172 * pull in #defines for kinds of processors
173 */
174 #include <machine/cputypes.h>
175
176
177 #ifdef _KERNEL
178 extern int cpu;
179 extern int cpu_class;
180 extern struct cpu_nocpuid_nameclass sh3_nocpuid_cpus[];
181 extern struct cpu_cpuid_nameclass sh3_cpuid_cpus[];
182
183 /* autoconf.c */
184 void configure __P((void));
185
186 /* sh3_machdep.c */
187 void sh3_startup __P((void));
188
189 /* machdep.c */
190 void delay __P((int));
191 void dumpconf __P((void));
192 void cpu_reset __P((void));
193
194 /* locore.s */
195 struct region_descriptor;
196 void lgdt __P((struct region_descriptor *));
197 void fillw __P((short, void *, size_t));
198 void
199 bcopyb __P((caddr_t from, caddr_t to, size_t len));
200 void
201 bcopyw __P((caddr_t from, caddr_t to, size_t len));
202 void
203 setPageDirReg __P((int pgdir));
204
205
206 struct pcb;
207 void savectx __P((struct pcb *));
208 void switch_exit __P((struct proc *));
209 void proc_trampoline __P((void));
210
211 /* clock.c */
212 void startrtclock __P((void));
213
214 /* npx.c */
215 void npxdrop __P((void));
216 void npxsave __P((void));
217
218 /* vm_machdep.c */
219 int kvtop __P((caddr_t));
220
221 #ifdef MATH_EMULATE
222 /* math_emulate.c */
223 int math_emulate __P((struct trapframe *));
224 #endif
225
226 #endif /* _KERNEL */
227
228 /*
229 * CTL_MACHDEP definitions.
230 */
231 #define CPU_CONSDEV 1 /* dev_t: console terminal device */
232 #define CPU_NKPDE 2 /* int: number of kernel PDEs */
233 #define CPU_BOOTED_KERNEL 3 /* string: booted kernel name */
234 #define CPU_SETPRIVPROC 4 /* set current proc to piviledged proc
235 */
236 #define CPU_DEBUGMODE 5 /* set debug mode */
237 #define CPU_LOADANDRESET 6 /* load kernel image and reset */
238 #define CPU_MAXID 7 /* number of valid machdep ids */
239
240 #define CTL_MACHDEP_NAMES { \
241 { 0, 0 }, \
242 { "console_device", CTLTYPE_STRUCT }, \
243 { "nkpde", CTLTYPE_INT }, \
244 { "booted_kernel", CTLTYPE_STRING }, \
245 { "set_priv_proc", CTLTYPE_INT }, \
246 { "debug_mode", CTLTYPE_INT }, \
247 { "load_and_reset", CTLTYPE_INT }, \
248 }
249
250 #endif /* !_SH3_CPU_H_ */
251