xref: /src/sys/arch/shark/isa/isa_irqhandler.c

/*	$NetBSD: isa_irqhandler.c,v 1.12 2007/02/20 01:51:16 matt Exp $	*/

/*
 * Copyright 1997
 * Digital Equipment Corporation. All rights reserved.
 *
 * This software is furnished under license and may be used and
 * copied only in accordance with the following terms and conditions.
 * Subject to these conditions, you may download, copy, install,
 * use, modify and distribute this software in source and/or binary
 * form. No title or ownership is transferred hereby.
 *
 * 1) Any source code used, modified or distributed must reproduce
 *    and retain this copyright notice and list of conditions as
 *    they appear in the source file.
 *
 * 2) No right is granted to use any trade name, trademark, or logo of
 *    Digital Equipment Corporation. Neither the "Digital Equipment
 *    Corporation" name nor any trademark or logo of Digital Equipment
 *    Corporation may be used to endorse or promote products derived
 *    from this software without the prior written permission of
 *    Digital Equipment Corporation.
 *
 * 3) This software is provided "AS-IS" and any express or implied
 *    warranties, including but not limited to, any implied warranties
 *    of merchantability, fitness for a particular purpose, or
 *    non-infringement are disclaimed. In no event shall DIGITAL be
 *    liable for any damages whatsoever, and in particular, DIGITAL
 *    shall not be liable for special, indirect, consequential, or
 *    incidental damages or damages for lost profits, loss of
 *    revenue or loss of use, whether such damages arise in contract,
 *    negligence, tort, under statute, in equity, at law or otherwise,
 *    even if advised of the possibility of such damage.
 */

/*
 * Copyright (c) 1994-1998 Mark Brinicombe.
 * Copyright (c) 1994 Brini.
 * All rights reserved.
 *
 * This code is derived from software written for Brini by Mark Brinicombe
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *	This product includes software developed by Mark Brinicombe
 *	for the NetBSD Project.
 * 4. The name of the company nor the name of the author may be used to
 *    endorse or promote products derived from this software without specific
 *    prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * IRQ/FIQ initialisation, claim, release and handler routines
 *
 *	from: irqhandler.c
 *
 * Created      : 30/09/94
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: isa_irqhandler.c,v 1.12 2007/02/20 01:51:16 matt Exp $");

#include "opt_irqstats.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/syslog.h>
#include <sys/malloc.h>

#include <uvm/uvm_extern.h>

#include <machine/intr.h>
#include <machine/cpu.h>

irqhandler_t *irqhandlers[NIRQS];

int current_intr_depth;
u_int current_mask;
u_int actual_mask;
u_int disabled_mask;
u_int spl_mask;
u_int irqmasks[IPL_LEVELS];

extern char *_intrnames;

/* Prototypes */

extern void set_spl_masks(void);
void irq_calculatemasks(void);
void stray_irqhandler(u_int);

#define WriteWord(a, b) *((volatile unsigned int *)(a)) = (b)

/*
 * void irq_init(void)
 *
 * Initialise the IRQ/FIQ sub system
 */

void
irq_init()
{
	int loop;

	/* Clear all the IRQ handlers and the irq block masks */
	for (loop = 0; loop < NIRQS; ++loop) {
		irqhandlers[loop] = NULL;
	}

	/*
	 * Setup the irqmasks for the different Interrupt Priority Levels
	 * We will start with no bits set and these will be updated as handlers
	 * are installed at different IPL's.
	 */
	for (loop = 0; loop < IPL_LEVELS; ++loop)
		irqmasks[loop] = 0;

	current_intr_depth = 0;
	current_mask = 0x00000000;
	disabled_mask = 0x00000000;
	actual_mask = 0x00000000;
	spl_mask = 0x00000000;

	set_spl_masks();

	/* Enable IRQ's and FIQ's */
	enable_interrupts(I32_bit | F32_bit);
}


/*
 * int irq_claim(int irq, irqhandler_t *handler)
 *
 * Enable an IRQ and install a handler for it.
 */

int
irq_claim(irq, handler)
	int irq;
	irqhandler_t *handler;
{

#ifdef DIAGNOSTIC
	/* Sanity check */
	if (handler == NULL)
		panic("NULL interrupt handler");
	if (handler->ih_func == NULL)
		panic("Interrupt handler does not have a function");
#endif	/* DIAGNOSTIC */

	/*
	 * IRQ_INSTRUCT indicates that we should get the irq number
	 * from the irq structure
	 */
	if (irq == IRQ_INSTRUCT)
		irq = handler->ih_num;

	/* Make sure the irq number is valid */
	if (irq < 0 || irq >= NIRQS)
		return(-1);

	/* Make sure the level is valid */
	if (handler->ih_level < 0 || handler->ih_level >= IPL_LEVELS)
    	        return(-1);

	/* Attach handler at top of chain */
	handler->ih_next = irqhandlers[irq];
	irqhandlers[irq] = handler;

	/*
	 * Reset the flags for this handler.
	 * As the handler is now in the chain mark it as active.
	 */
	handler->ih_flags = 0 | IRQ_FLAG_ACTIVE;

	/*
	 * Record the interrupt number for accounting.
	 * Done here as the accounting number may not be the same as the
	 * IRQ number though for the moment they are
	 */
	handler->ih_num = irq;

	irq_calculatemasks();

	enable_irq(irq);
	set_spl_masks();
	return(0);
}


/*
 * int irq_release(int irq, irqhandler_t *handler)
 *
 * Disable an IRQ and remove a handler for it.
 */

int
irq_release(irq, handler)
	int irq;
	irqhandler_t *handler;
{
	irqhandler_t *irqhand;
	irqhandler_t **prehand;

	/*
	 * IRQ_INSTRUCT indicates that we should get the irq number
	 * from the irq structure
	 */
	if (irq == IRQ_INSTRUCT)
		irq = handler->ih_num;

	/* Make sure the irq number is valid */
	if (irq < 0 || irq >= NIRQS)
		return(-1);

	/* Locate the handler */
	irqhand = irqhandlers[irq];
	prehand = &irqhandlers[irq];

	while (irqhand && handler != irqhand) {
		prehand = &irqhand;
		irqhand = irqhand->ih_next;
	}

	/* Remove the handler if located */
	if (irqhand)
		*prehand = irqhand->ih_next;
	else
		return(-1);

	/* Now the handler has been removed from the chain mark is as inactive */
	irqhand->ih_flags &= ~IRQ_FLAG_ACTIVE;

	/* Make sure the head of the handler list is active */
	if (irqhandlers[irq])
		irqhandlers[irq]->ih_flags |= IRQ_FLAG_ACTIVE;

	irq_calculatemasks();

	/*
	 * Disable the appropriate mask bit if there are no handlers left for
	 * this IRQ.
	 */
	if (irqhandlers[irq] == NULL)
		disable_irq(irq);

	set_spl_masks();

	return(0);
}

/* adapted from .../i386/isa/isa_machdep.c */
/*
 * Recalculate the interrupt masks from scratch.
 * We could code special registry and deregistry versions of this function that
 * would be faster, but the code would be nastier, and we don't expect this to
 * happen very much anyway.
 */
void
irq_calculatemasks()
{
	int          irq, level;
	irqhandler_t *ptr;
	int          irqlevel[NIRQS];

	/* First, figure out which levels each IRQ uses. */
	for (irq = 0; irq < NIRQS; irq++) {
		int levels = 0;
		for (ptr = irqhandlers[irq]; ptr; ptr = ptr->ih_next)
			levels |= 1 << ptr->ih_level;
		irqlevel[irq] = levels;
	}

	/* Then figure out which IRQs use each level. */
	for (level = 0; level < IPL_LEVELS; level++) {
		int irqs = 0;
		for (irq = 0; irq < NIRQS; irq++)
			if (irqlevel[irq] & (1 << level))
				irqs |= 1 << irq;
		irqmasks[level] = ~irqs;
	}

	/*
	 * Enforce a hierarchy that gives slow devices a better chance at not
	 * dropping data.
	 */
	irqmasks[IPL_NET] &= irqmasks[IPL_BIO];
	irqmasks[IPL_TTY] &= irqmasks[IPL_NET];

	/*
	 * There are tty, network and disk drivers that use free() at interrupt
	 * time, so imp > (tty | net | bio).
	 */
	irqmasks[IPL_VM] &= irqmasks[IPL_TTY];

	irqmasks[IPL_AUDIO] &= irqmasks[IPL_VM];

	/*
	 * Since run queues may be manipulated by both the statclock and tty,
	 * network, and disk drivers, statclock > (tty | net | bio).
	 */
	irqmasks[IPL_CLOCK] &= irqmasks[IPL_AUDIO];

	/*
	 * IPL_HIGH must block everything that can manipulate a run queue.
	 */
	irqmasks[IPL_HIGH] &= irqmasks[IPL_CLOCK];

	/*
	 * We need serial drivers to run at the absolute highest priority to
	 * avoid overruns, so serial > high.
	 */
	irqmasks[IPL_SERIAL] &= irqmasks[IPL_HIGH];
}


void *
intr_claim(irq, level, name, ih_func, ih_arg)
	int irq;
	int level;
	const char *name;
	int (*ih_func) __P((void *));
	void *ih_arg;
{
	irqhandler_t *ih;

	ih = malloc(sizeof(*ih), M_DEVBUF, M_NOWAIT | M_ZERO);
	if (!ih)
		panic("intr_claim(): Cannot malloc handler memory");

	ih->ih_level = level;
	ih->ih_func = ih_func;
	ih->ih_arg = ih_arg;
	ih->ih_flags = 0;
	if (name == NULL) {
		snprintf(ih->ih_evname, sizeof(ih->ih_evname), "irq %2d", irq);
		name = ih->ih_evname;
	}
	evcnt_attach_dynamic(&ih->ih_ev, EVCNT_TYPE_INTR, NULL, NULL, name);

	if (irq_claim(irq, ih) != 0) {
		evcnt_detach(&ih->ih_ev);
		return(NULL);
	}
	return(ih);
}

int
intr_release(arg)
	void *arg;
{
	irqhandler_t *ih = (irqhandler_t *)arg;

	if (irq_release(ih->ih_num, ih) == 0) {
		evcnt_detach(&ih->ih_ev);
		free(ih, M_DEVBUF);
		return(0);
	}
	return(1);
}


/*
 * void disable_irq(int irq)
 *
 * Disables a specific irq. The irq is removed from the master irq mask
 */

void
disable_irq(irq)
	int irq;
{
	u_int oldirqstate;

	oldirqstate = disable_interrupts(I32_bit);
	current_mask &= ~(1 << irq);
	irq_setmasks();
	restore_interrupts(oldirqstate);
}


/*
 * void enable_irq(int irq)
 *
 * Enables a specific irq. The irq is added to the master irq mask
 * This routine should be used with caution. A handler should already
 * be installed.
 */

void
enable_irq(irq)
	int irq;
{
	u_int oldirqstate;

	oldirqstate = disable_interrupts(I32_bit);
	current_mask |= (1 << irq);
	irq_setmasks();
	restore_interrupts(oldirqstate);
}


/*
 * void stray_irqhandler(u_int mask)
 *
 * Handler for stray interrupts. This gets called if a handler cannot be
 * found for an interrupt.
 */

void
stray_irqhandler(mask)
	u_int mask;
{
	static u_int stray_irqs = 0;

	if (++stray_irqs <= 8)
		log(LOG_ERR, "Stray interrupt %08x%s\n", mask,
		    stray_irqs >= 8 ? ": stopped logging" : "");
}