KRUPS revision 1.56.2.1
1 # $NetBSD: KRUPS,v 1.56.2.1 2012/03/11 01:52:25 mrg Exp $ 2 # From: NetBSD: GENERIC,v 1.197 2006/12/04 23:43:35 elad Exp 3 # 4 # Krups (JavaStation-NC) machine description file 5 # 6 7 include "arch/sparc/conf/std.sparc" 8 9 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 10 11 #ident "KRUPS-$Revision: 1.56.2.1 $" 12 13 maxusers 32 14 15 ## System kernel configuration. See options(4) for more detail. 16 17 18 # Options for variants of the Sun SPARC architecure. 19 # We currently support three architecture types; at least one is required. 20 options SUN4M # sun4m - SS10, SS20, Classic, etc. 21 22 # microSPARC-IIep is PCI based sun4m (JavaStation-NC, CP1200, etc) 23 # This option selects if SUN4M means "normal" 4m or IIep. Kernels 24 # with this option turned on will refuse to work on normal 4m. 25 options MSIIEP # microSPARC-IIep 26 27 # XXX: uwe: PROM location conflicts with kernel VA space !!! 28 options PROM_AT_F0 29 makeoptions TEXTADDR=E8004000 30 31 32 ## System options specific to the sparc machine type 33 34 # Blink the power LED on some machines to indicate the system load. 35 options BLINK 36 37 38 #### System options that are the same for all ports 39 40 ## Root device configuration: change the ?'s if you are going to use a 41 ## nonstandard root partition (other than where the kernel is booted from) 42 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 43 ## automagically determined at boot time. 44 45 config netbsd root on ? type ? 46 47 ## System call tracing (see ktrace(1)). 48 options KTRACE 49 50 ## Collect statistics on kernel malloc's and free's. This does have a 51 ## significant performance hit on slower machines, so it is intended for 52 ## diagnostic use only. 53 #options KMEMSTATS 54 55 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 56 options SYSVMSG # System V message queues 57 options SYSVSEM # System V semaphores 58 #options SEMMNI=10 # number of semaphore identifiers 59 #options SEMMNS=60 # number of semaphores in system 60 #options SEMUME=10 # max number of undo entries per process 61 #options SEMMNU=30 # number of undo structures in system 62 options SYSVSHM # System V shared memory 63 64 ## Loadable kernel module support; still under development. 65 66 #options USERCONF # userconf(4) support 67 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 68 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 69 70 ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 71 options NFS_BOOT_BOOTPARAM 72 #options NFS_BOOT_BOOTP 73 options NFS_BOOT_DHCP 74 75 76 #### wscons options 77 78 # builtin terminal emulations 79 options WSEMUL_SUN # sun terminal emulation 80 options WSEMUL_VT100 # VT100 / VT220 emulation 81 options WSEMUL_DEFAULT="\"vt100\"" 82 83 # customization of console and kernel output - see dev/wscons/wsdisplayvar.h 84 options WSDISPLAY_CUSTOM_OUTPUT # color customization from wsconsctl(8) 85 #options WS_DEFAULT_FG=WSCOL_WHITE 86 #options WS_DEFAULT_BG=WSCOL_BLACK 87 #options WS_DEFAULT_COLATTR="(0)" 88 options WS_KERNEL_FG=WSCOL_GREEN 89 #options WS_KERNEL_BG=WSCOL_BLACK 90 options WS_KERNEL_COLATTR=WSATTR_HILIT 91 92 # customization of console border color 93 options WSDISPLAY_CUSTOM_BORDER # custom border colors via wsconsctl(8) 94 #options WSDISPLAY_BORDER_COLOR=WSCOL_BLUE # default color 95 96 # compatibility to other console drivers 97 options WSDISPLAY_COMPAT_PCVT # emulate some ioctls 98 options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 99 options WSDISPLAY_COMPAT_USL # VT handling 100 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 101 102 options FONT_GALLANT12x22 # PROM font look-alike 103 104 #options WSKBD_EVENT_AUTOREPEAT # auto repeat in event mode 105 #options WSKBD_USONLY # strip off non-US keymaps 106 107 # see dev/pckbport/wskbdmap_mfii.c for implemented layouts 108 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 109 110 # allocate a number of virtual screens at autoconfiguration time 111 #options WSDISPLAY_DEFAULTSCREENS=4 112 113 114 #### Debugging options 115 116 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 117 ## serial console break or keyboard reset, where the PROM would normally 118 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 119 options DDB # kernel dynamic debugger 120 options DDB_HISTORY_SIZE=100 # enable history editing in DDB 121 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 122 123 ## You may also use gdb, on another computer connected to this machine over 124 ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 125 ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 126 ## the minor device number encodes the PROM enumeration of the serial ports, 127 ## i.e.: 128 ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 129 ## (Note: ttyc and ttyd are available only on some sun4 models) 130 #options KGDB # support for kernel gdb 131 #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 132 #options KGDB_DEVRATE=38400 # baud rate 133 134 135 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 136 ## such that gdb(1) can be used on a kernel coredump. 137 138 #makeoptions DEBUG="-g" 139 makeoptions CPUFLAGS="-mcpu=supersparc" 140 141 142 ## Adds code to the kernel that does internal consistency checks, and will 143 ## cause the kernel to panic if corruption of internal data structures 144 ## is detected. 145 #options DIAGNOSTIC # extra kernel sanity checking 146 147 ## Enable (possibly expensive) debugging code that may also display messages 148 ## on the system console 149 #options DEBUG 150 #options LOCKDEBUG 151 #options SYSCALL_DEBUG 152 153 options MIIVERBOSE # verbose PHY autoconfig messages 154 155 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 156 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 157 ## and other insecurities good only for development work. Do not use this 158 ## option on a production machine. 159 #options INSECURE 160 161 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 162 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 163 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 164 ## opaque file mechanism. Perl calls this "secure setuid scripts." 165 166 #options FDSCRIPTS 167 #options SETUIDSCRIPTS 168 169 ## Options for compatibility with previous releases foreign system binaries. 170 ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 171 ## additional user-level utilities or system configuration files. See 172 ## compat_sunos(8) and compat_svr4(8). 173 174 options COMPAT_43 # 4.3BSD system interfaces 175 options COMPAT_10 # NetBSD 1.0 binary compatibility 176 options COMPAT_11 # NetBSD 1.1 binary compatibility 177 options COMPAT_12 # NetBSD 1.2 binary compatibility 178 options COMPAT_13 # NetBSD 1.3 binary compatibility 179 options COMPAT_14 # NetBSD 1.4 binary compatibility 180 options COMPAT_15 # NetBSD 1.5 binary compatibility 181 options COMPAT_16 # NetBSD 1.6 binary compatibility 182 options COMPAT_20 # NetBSD 2.0 binary compatibility 183 options COMPAT_30 # NetBSD 3.0 binary compatibility 184 options COMPAT_40 # NetBSD 4.0 binary compatibility 185 options COMPAT_SUNOS # SunOS 4.x binary compatibility 186 options COMPAT_SVR4 # SunOS 5.x binary compatibility 187 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 188 189 ## File systems. You probably need at least one of FFS or NFS. 190 file-system FFS # Berkeley Fast Filesystem 191 file-system NFS # Sun NFS-compatible filesystem client 192 file-system KERNFS # kernel data-structure filesystem 193 file-system NULLFS # NULL layered filesystem 194 file-system OVERLAY # overlay file system 195 file-system MFS # memory-based filesystem 196 file-system FDESC # user file descriptor filesystem 197 file-system UMAPFS # uid/gid remapping filesystem 198 #file-system LFS # Log-based filesystem (still experimental) 199 file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 200 file-system PROCFS # /proc 201 #file-system CD9660 # ISO 9660 + Rock Ridge file system 202 file-system UNION # union file system 203 #file-system MSDOSFS # MS-DOS FAT filesystem(s). 204 #file-system CODA # Coda File System; also needs vcoda (below) 205 file-system PTYFS # /dev/pts/N support 206 #file-system TMPFS # Efficient memory file-system 207 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 208 209 ## File system options. 210 #options NFSSERVER # Sun NFS-compatible filesystem server 211 #options QUOTA # legacy UFS quotas 212 #options QUOTA2 # new, in-filesystem UFS quotas 213 #options FFS_EI # FFS Endian Independent support 214 options FFS_NO_SNAPSHOT # No FFS snapshot support 215 216 ## Network protocol support. In most environments, INET is required. 217 options INET # IP (Internet Protocol) v4 218 options INET6 # IPV6 219 #options IPSEC # IP security 220 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 221 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 222 #options IPSEC_DEBUG # debug for IP security 223 #options GATEWAY # packet forwarding ("router switch") 224 #options MROUTING # packet forwarding of multicast packets 225 #options PIM # Protocol Independent Multicast 226 #options DIRECTED_BROADCAST # allow broadcasts through routers 227 options ISO,TPIP # OSI networking 228 #options EON # OSI tunneling over IP 229 #options NETATALK # AppleTalk (over Ethernet) protocol 230 options NTP # Network Time Protocol in-kernel support 231 #options PPS_SYNC # Add serial line synchronization for NTP 232 options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 233 options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 234 options IPFILTER_LOOKUP # ippool(8) support 235 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 236 options PPP_BSDCOMP # Add BSD compression to ppp device 237 options PPP_DEFLATE # Add deflate (libz) compression to ppp device 238 options PPP_FILTER # Add active filters for ppp (via bpf) 239 240 241 242 #### Main bus and CPU .. all systems. 243 mainbus0 at root 244 cpu0 at mainbus0 245 246 #### Bus types found on SPARC systems. 247 248 msiiep0 at mainbus0 # microSPARC-IIep PCIC, timer, ... 249 250 mspcic0 at msiiep0 # PCI tree 251 pci0 at mspcic0 252 options PCIVERBOSE 253 #options PCI_CONFIG_DUMP # hangs reading IGA1682 config past offset 64 254 255 ebus* at pci? dev ? function ? # ebus devices 256 257 258 #### Standard system devices -- all required for a given architecture 259 260 # timer is part of ms-IIep PCIC 261 timer0 at msiiep0 262 263 ## ds1287 TOD clock at EBus 264 rtc* at ebus? 265 266 #### Serial port configuration 267 268 ## NS16x50 serial chips and clones. 269 com* at ebus? 270 271 272 #### Disk controllers and disks 273 274 ## A disk-like interface to files. Can be used to create floppy, CD, 275 ## miniroot images, etc. 276 277 #pseudo-device vnd 278 #options VND_COMPRESSION # compressed vnd(4) 279 280 ## Memory disk device, used on boot floppies with compressed 281 ## kernel-plus-root-disk images. 282 283 #pseudo-device md 284 285 286 #### Network interfaces 287 288 ## Happy Meal Ethernet 289 hme* at pci? dev ? function ? # network "hme" compatible 290 291 # MII/PHY support 292 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 293 294 ## Loopback network interface; required 295 pseudo-device loop 296 297 ## SLIP and CSLIP interfaces, for IP over a serial line. 298 #pseudo-device sl 299 300 ## PPP, the successor to SLIP. See pppd(8). 301 #pseudo-device ppp 302 303 ## PPP over Ethernet (RFC 2516) 304 #pseudo-device pppoe 305 306 ## Network "tunnel" device, allowing protocol stacks to run in the userland. 307 ## This is used by the third-party user-mode "ppp" program, and others. 308 #pseudo-device tun 309 #pseudo-device tap # virtual Ethernet 310 311 ## Generic L3 over IP tunnel 312 #pseudo-device gre # generic L3 over IP tunnel 313 314 ## Berkeley Packet Filter, required to run RARPD. A generic C-language 315 ## interface that allows selective examining of incoming packets. 316 pseudo-device bpfilter 317 318 #pseudo-device carp # Common Address Redundancy Protocol 319 320 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 321 ## one example of the use of the IP Filter. 322 #pseudo-device ipfilter 323 324 ## for IPv6 325 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 326 #pseudo-device faith # IPv[46] tcp relay translation i/f 327 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 328 329 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 330 #pseudo-device vlan 331 332 #### Audio and video devices 333 334 ## /dev/audio support 335 audiocs* at ebus? # SUNW,CS4231 336 audio* at audiocs? 337 338 # wscons 339 pckbc* at ebus? # PC keyboard controller 340 pckbd* at pckbc? # PC keyboard 341 pms* at pckbc? # PS/2 mouse for wsmouse 342 igsfb* at pci? dev ? function ? 343 wsdisplay* at igsfb? console ? 344 wskbd* at pckbd? console ? 345 wsmouse* at pms? mux 0 346 347 348 #### Other device configuration 349 350 ## Pseudo ttys, required for network logins and programs like screen. 351 352 pseudo-device pty # pseudo-terminals 353 354 ## Random device, used to implement /dev/random (a source of random noise), 355 ## and generate randomness for some kernel formulae. 356 357 358 # a pseudo device needed for Coda # also needs CODA (above) 359 #pseudo-device vcoda 4 # coda minicache <-> venus comm. 360 361 # wscons pseudo-devices 362 pseudo-device wsmux # mouse & keyboard multiplexor 363 pseudo-device wsfont 364 365 pseudo-device clockctl # user control of clock subsystem 366 pseudo-device ksyms # /dev/ksyms 367 pseudo-device putter # for puffs and pud 368 369 #pseudo-device pf # PF packet filter 370 #pseudo-device pflog # PF log if 371 #pseudo-device fss # file system snapshot device 372 373 #options FILEASSOC # fileassoc(9) 374 375 # Veriexec 376 # 377 # a pseudo device needed for veriexec 378 #pseudo-device veriexec 1 379 # 380 # Uncomment the fingerprint methods below that are desired. Note that 381 # removing fingerprint methods will have almost no impact on the kernel 382 # code size. 383 # 384 #options VERIFIED_EXEC_FP_RMD160 385 #options VERIFIED_EXEC_FP_SHA256 386 #options VERIFIED_EXEC_FP_SHA384 387 #options VERIFIED_EXEC_FP_SHA512 388 #options VERIFIED_EXEC_FP_SHA1 389 #options VERIFIED_EXEC_FP_MD5 390 391 #options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 392 # (for static binaries only for now) 393
Indexes created Wed Oct 07 00:25:59 UTC 2026