MRCOFFEE revision 1.3.2.6
1 1.3.2.6 skrll # $NetBSD: MRCOFFEE,v 1.3.2.6 2005/02/15 21:33:01 skrll Exp $ 2 1.3.2.2 skrll # From: NetBSD: GENERIC,v 1.160 2004/07/10 12:05:35 uwe Exp 3 1.3.2.2 skrll # 4 1.3.2.2 skrll # Mr.Coffee (JavaStation 1) machine description file 5 1.3.2.2 skrll # 6 1.3.2.2 skrll # This configuration is for machines using Open Boot Prom only! 7 1.3.2.2 skrll # The OpenFirmware-variants of JavaStation 1 should use the MRCOFFEE_OFW 8 1.3.2.2 skrll # kernel. 9 1.3.2.2 skrll # 10 1.3.2.2 skrll 11 1.3.2.2 skrll include "arch/sparc/conf/std.sparc" 12 1.3.2.2 skrll 13 1.3.2.2 skrll options INCLUDE_CONFIG_FILE # embed config file in kernel binary 14 1.3.2.2 skrll 15 1.3.2.6 skrll #ident "MRCOFFEE-$Revision: 1.3.2.6 $" 16 1.3.2.2 skrll 17 1.3.2.2 skrll maxusers 32 18 1.3.2.2 skrll 19 1.3.2.2 skrll ## System kernel configuration. See options(4) for more detail. 20 1.3.2.2 skrll 21 1.3.2.2 skrll 22 1.3.2.2 skrll # Options for variants of the Sun SPARC architecure. 23 1.3.2.2 skrll # We currently support three architecture types; at least one is required. 24 1.3.2.2 skrll options SUN4M # sun4m - SS10, SS20, Classic, etc. 25 1.3.2.2 skrll 26 1.3.2.2 skrll 27 1.3.2.2 skrll ## System options specific to the sparc machine type 28 1.3.2.2 skrll 29 1.3.2.2 skrll # Blink the power LED on some machines to indicate the system load. 30 1.3.2.2 skrll #options BLINK 31 1.3.2.2 skrll 32 1.3.2.2 skrll # XXX: uwe: TCX driver doesn't support RASTERCONSOLE, so don't bother 33 1.3.2.2 skrll ## Use a faster console than the PROM's slow drawing routines. Not needed 34 1.3.2.2 skrll ## for headless (no framebuffer) machines. 35 1.3.2.2 skrll #options RASTERCONSOLE # fast rasterop console 36 1.3.2.2 skrll #options FONT_GALLANT12x22 # the console font 37 1.3.2.2 skrll #options FONT_BOLD8x16 # a somewhat smaller font 38 1.3.2.2 skrll ## default console colors: black-on-white; this can be changed 39 1.3.2.2 skrll ## using the following two options. 40 1.3.2.2 skrll #options RASTERCONSOLE_FGCOL=WSCOL_BLACK 41 1.3.2.2 skrll #options RASTERCONSOLE_BGCOL=WSCOL_WHITE 42 1.3.2.2 skrll 43 1.3.2.2 skrll #### System options that are the same for all ports 44 1.3.2.2 skrll 45 1.3.2.2 skrll ## Root device configuration: change the ?'s if you are going to use a 46 1.3.2.2 skrll ## nonstandard root partition (other than where the kernel is booted from) 47 1.3.2.2 skrll ## and/or nonstandard root type (not ffs or nfs). Normally this can be 48 1.3.2.2 skrll ## automagically determined at boot time. 49 1.3.2.2 skrll 50 1.3.2.2 skrll config netbsd root on ? type ? 51 1.3.2.2 skrll 52 1.3.2.2 skrll ## System call tracing (see ktrace(1)). 53 1.3.2.2 skrll options KTRACE 54 1.3.2.2 skrll options SYSTRACE # system call vetting via systrace(1) 55 1.3.2.2 skrll 56 1.3.2.2 skrll ## Collect statistics on kernel malloc's and free's. This does have a 57 1.3.2.2 skrll ## significant performance hit on slower machines, so it is intended for 58 1.3.2.2 skrll ## diagnostic use only. 59 1.3.2.2 skrll #options KMEMSTATS 60 1.3.2.2 skrll 61 1.3.2.2 skrll ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 62 1.3.2.2 skrll options SYSVMSG # System V message queues 63 1.3.2.2 skrll options SYSVSEM # System V semaphores 64 1.3.2.2 skrll #options SEMMNI=10 # number of semaphore identifiers 65 1.3.2.2 skrll #options SEMMNS=60 # number of semaphores in system 66 1.3.2.2 skrll #options SEMUME=10 # max number of undo entries per process 67 1.3.2.2 skrll #options SEMMNU=30 # number of undo structures in system 68 1.3.2.2 skrll options SYSVSHM # System V shared memory 69 1.3.2.2 skrll #options SHMMAXPGS=1024 # 1024 pages is the default 70 1.3.2.2 skrll options P1003_1B_SEMAPHORE # p1003.1b semaphore support 71 1.3.2.2 skrll 72 1.3.2.2 skrll ## Loadable kernel module support; still under development. 73 1.3.2.2 skrll options LKM 74 1.3.2.2 skrll 75 1.3.2.2 skrll options USERCONF # userconf(4) support 76 1.3.2.2 skrll #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 77 1.3.2.2 skrll options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 78 1.3.2.2 skrll 79 1.3.2.2 skrll # Enable experimental buffer queue strategy for better responsiveness under 80 1.3.2.2 skrll # high disk I/O load. Use it with caution - it's not proven to be stable yet. 81 1.3.2.2 skrll #options NEW_BUFQ_STRATEGY 82 1.3.2.2 skrll 83 1.3.2.2 skrll ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 84 1.3.2.2 skrll options NFS_BOOT_BOOTPARAM 85 1.3.2.2 skrll #options NFS_BOOT_BOOTP 86 1.3.2.2 skrll options NFS_BOOT_DHCP 87 1.3.2.2 skrll 88 1.3.2.2 skrll #### Debugging options 89 1.3.2.2 skrll 90 1.3.2.2 skrll ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 91 1.3.2.2 skrll ## serial console break or keyboard reset, where the PROM would normally 92 1.3.2.2 skrll ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 93 1.3.2.2 skrll #options DDB # kernel dynamic debugger 94 1.3.2.2 skrll #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 95 1.3.2.2 skrll #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 96 1.3.2.2 skrll 97 1.3.2.2 skrll ## You may also use gdb, on another computer connected to this machine over 98 1.3.2.2 skrll ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 99 1.3.2.2 skrll ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 100 1.3.2.2 skrll ## the minor device number encodes the PROM enumeration of the serial ports, 101 1.3.2.2 skrll ## i.e.: 102 1.3.2.2 skrll ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 103 1.3.2.2 skrll ## (Note: ttyc and ttyd are available only on some sun4 models) 104 1.3.2.2 skrll #options KGDB # support for kernel gdb 105 1.3.2.2 skrll #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 106 1.3.2.2 skrll #options KGDB_DEVRATE=38400 # baud rate 107 1.3.2.2 skrll 108 1.3.2.2 skrll 109 1.3.2.2 skrll ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 110 1.3.2.2 skrll ## such that gdb(1) can be used on a kernel coredump. 111 1.3.2.2 skrll 112 1.3.2.2 skrll #makeoptions DEBUG="-g" 113 1.3.2.2 skrll makeoptions COPTS="-pipe -mcpu=supersparc -O2" 114 1.3.2.2 skrll 115 1.3.2.2 skrll 116 1.3.2.2 skrll 117 1.3.2.2 skrll ## Adds code to the kernel that does internal consistency checks, and will 118 1.3.2.2 skrll ## cause the kernel to panic if corruption of internal data structures 119 1.3.2.2 skrll ## is detected. 120 1.3.2.2 skrll #options DIAGNOSTIC # extra kernel sanity checking 121 1.3.2.2 skrll 122 1.3.2.2 skrll ## Enable (possibly expensive) debugging code that may also display messages 123 1.3.2.2 skrll ## on the system console 124 1.3.2.2 skrll #options DEBUG 125 1.3.2.2 skrll 126 1.3.2.2 skrll ## Make SCSI error messages more verbose when explaining their meanings. 127 1.3.2.2 skrll options SCSIVERBOSE 128 1.3.2.2 skrll 129 1.3.2.2 skrll options MIIVERBOSE # verbose PHY autoconfig messages 130 1.3.2.2 skrll 131 1.3.2.2 skrll ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 132 1.3.2.2 skrll ## This allows writing to /dev/mem, loading kernel modules while multi-user, 133 1.3.2.2 skrll ## and other insecurities good only for development work. Do not use this 134 1.3.2.2 skrll ## option on a production machine. 135 1.3.2.2 skrll #options INSECURE 136 1.3.2.2 skrll 137 1.3.2.2 skrll ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 138 1.3.2.2 skrll ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 139 1.3.2.2 skrll ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 140 1.3.2.2 skrll ## opaque file mechanism. Perl calls this "secure setuid scripts." 141 1.3.2.2 skrll 142 1.3.2.2 skrll #options FDSCRIPTS 143 1.3.2.2 skrll #options SETUIDSCRIPTS 144 1.3.2.2 skrll 145 1.3.2.2 skrll ## Options for compatibility with previous releases foreign system binaries. 146 1.3.2.2 skrll ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 147 1.3.2.2 skrll ## additional user-level utilities or system configuration files. See 148 1.3.2.2 skrll ## compat_sunos(8) and compat_svr4(8). 149 1.3.2.2 skrll 150 1.3.2.2 skrll options COMPAT_43 # 4.3BSD system interfaces 151 1.3.2.2 skrll options COMPAT_10 # NetBSD 1.0 binary compatibility 152 1.3.2.2 skrll options COMPAT_11 # NetBSD 1.1 binary compatibility 153 1.3.2.2 skrll options COMPAT_12 # NetBSD 1.2 binary compatibility 154 1.3.2.2 skrll options COMPAT_13 # NetBSD 1.3 binary compatibility 155 1.3.2.2 skrll options COMPAT_14 # NetBSD 1.4 binary compatibility 156 1.3.2.2 skrll options COMPAT_16 # NetBSD 1.6 binary compatibility 157 1.3.2.2 skrll options COMPAT_20 # NetBSD 2.0 binary compatibility 158 1.3.2.2 skrll options COMPAT_SUNOS # SunOS 4.x binary compatibility 159 1.3.2.2 skrll options COMPAT_SVR4 # SunOS 5.x binary compatibility 160 1.3.2.5 skrll options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 161 1.3.2.2 skrll 162 1.3.2.2 skrll ## File systems. You probably need at least one of FFS or NFS. 163 1.3.2.2 skrll file-system FFS # Berkeley Fast Filesystem 164 1.3.2.2 skrll file-system NFS # Sun NFS-compatible filesystem client 165 1.3.2.2 skrll file-system KERNFS # kernel data-structure filesystem 166 1.3.2.2 skrll file-system NULLFS # NULL layered filesystem 167 1.3.2.2 skrll file-system OVERLAY # overlay file system 168 1.3.2.2 skrll file-system MFS # memory-based filesystem 169 1.3.2.2 skrll file-system FDESC # user file descriptor filesystem 170 1.3.2.2 skrll file-system UMAPFS # uid/gid remapping filesystem 171 1.3.2.2 skrll #file-system LFS # Log-based filesystem (still experimental) 172 1.3.2.2 skrll file-system PORTAL # portal filesystem (still experimental) 173 1.3.2.2 skrll file-system PROCFS # /proc 174 1.3.2.2 skrll #file-system CD9660 # ISO 9660 + Rock Ridge file system 175 1.3.2.2 skrll #file-system UNION # union file system 176 1.3.2.2 skrll #file-system MSDOSFS # MS-DOS FAT filesystem(s). 177 1.3.2.2 skrll #file-system CODA # Coda File System; also needs vcoda (below) 178 1.3.2.2 skrll 179 1.3.2.2 skrll ## File system options. 180 1.3.2.2 skrll #options NFSSERVER # Sun NFS-compatible filesystem server 181 1.3.2.2 skrll #options QUOTA # FFS quotas 182 1.3.2.2 skrll #options FFS_EI # FFS Endian Independent support 183 1.3.2.2 skrll #options SOFTDEP # FFS soft updates support. 184 1.3.2.6 skrll #options FFS_SNAPSHOT # ffs snapshots 185 1.3.2.2 skrll 186 1.3.2.2 skrll ## Network protocol support. In most environments, INET is required. 187 1.3.2.2 skrll options INET # IP (Internet Protocol) v4 188 1.3.2.2 skrll options INET6 # IPV6 189 1.3.2.2 skrll #options IPSEC # IP security 190 1.3.2.2 skrll #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 191 1.3.2.2 skrll #options IPSEC_DEBUG # debug for IP security 192 1.3.2.2 skrll #options GATEWAY # packet forwarding ("router switch") 193 1.3.2.2 skrll #options MROUTING # packet forwarding of multicast packets 194 1.3.2.3 skrll #options PIM # Protocol Independent Multicast 195 1.3.2.2 skrll #options DIRECTED_BROADCAST # allow broadcasts through routers 196 1.3.2.2 skrll options NS # Xerox NS networking 197 1.3.2.2 skrll #options NSIP # Xerox NS tunneling over IP 198 1.3.2.2 skrll options ISO,TPIP # OSI networking 199 1.3.2.2 skrll #options EON # OSI tunneling over IP 200 1.3.2.2 skrll #options CCITT,LLC,HDLC # X.25 packet switched protocol 201 1.3.2.2 skrll #options NETATALK # AppleTalk (over Ethernet) protocol 202 1.3.2.2 skrll options NTP # Network Time Protocol in-kernel support 203 1.3.2.2 skrll #options PPS_SYNC # Add serial line synchronization for NTP 204 1.3.2.2 skrll #options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 205 1.3.2.2 skrll #options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 206 1.3.2.2 skrll #options IPFILTER_DEFAULT_BLOCK # block all packets by default 207 1.3.2.2 skrll #options PPP_BSDCOMP # Add BSD compression to ppp device 208 1.3.2.2 skrll #options PPP_DEFLATE # Add deflate (libz) compression to ppp device 209 1.3.2.2 skrll #options PPP_FILTER # Add active filters for ppp (via bpf) 210 1.3.2.2 skrll 211 1.3.2.2 skrll 212 1.3.2.2 skrll 213 1.3.2.2 skrll #### Main bus and CPU .. all systems. 214 1.3.2.2 skrll mainbus0 at root 215 1.3.2.2 skrll cpu0 at mainbus0 216 1.3.2.2 skrll 217 1.3.2.2 skrll #### Bus types found on SPARC systems. 218 1.3.2.2 skrll 219 1.3.2.2 skrll obio0 at mainbus0 # sun4 and sun4m 220 1.3.2.2 skrll 221 1.3.2.2 skrll iommu0 at mainbus0 # sun4m 222 1.3.2.2 skrll sbus0 at iommu0 # sun4m 223 1.3.2.2 skrll 224 1.3.2.2 skrll 225 1.3.2.2 skrll #### Standard system devices -- all required for a given architecture 226 1.3.2.2 skrll 227 1.3.2.2 skrll ## Auxiliary system registers on sun4c and sun4m 228 1.3.2.2 skrll auxreg0 at obio0 # sun4m 229 1.3.2.2 skrll 230 1.3.2.2 skrll ## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 231 1.3.2.2 skrll clock0 at obio0 # sun4m 232 1.3.2.2 skrll 233 1.3.2.2 skrll ## Timer chip found on 4/300, sun4c, and sun4m systems. 234 1.3.2.2 skrll timer0 at obio0 # sun4m 235 1.3.2.2 skrll 236 1.3.2.2 skrll 237 1.3.2.2 skrll #### Serial port configuration 238 1.3.2.2 skrll 239 1.3.2.2 skrll ## NS16x50 serial chips and clones. Present on the 240 1.3.2.2 skrll ## Sun JavaStation-1 and Tadpole SPARCbook 3 241 1.3.2.2 skrll com0 at obio0 # sun4m 242 1.3.2.2 skrll 243 1.3.2.2 skrll 244 1.3.2.2 skrll #### Keyboard and mouse 245 1.3.2.2 skrll 246 1.3.2.2 skrll pckbc0 at obio0 247 1.3.2.2 skrll kbd0 at pckbc0 248 1.3.2.2 skrll ms0 at pckbc0 249 1.3.2.2 skrll 250 1.3.2.2 skrll 251 1.3.2.2 skrll #### Disk controllers and disks 252 1.3.2.2 skrll 253 1.3.2.2 skrll ## A disk-like interface to files. Can be used to create floppy, CD, 254 1.3.2.2 skrll ## miniroot images, etc. 255 1.3.2.2 skrll 256 1.3.2.2 skrll #pseudo-device vnd 4 257 1.3.2.2 skrll 258 1.3.2.2 skrll 259 1.3.2.2 skrll #### Network interfaces 260 1.3.2.2 skrll 261 1.3.2.2 skrll ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 262 1.3.2.2 skrll ledma0 at sbus0 slot ? offset ? # sun4m on-board 263 1.3.2.2 skrll le0 at ledma0 # sun4m on-board 264 1.3.2.2 skrll 265 1.3.2.2 skrll 266 1.3.2.2 skrll ## Loopback network interface; required 267 1.3.2.2 skrll pseudo-device loop 268 1.3.2.2 skrll 269 1.3.2.2 skrll ## SLIP and CSLIP interfaces, for IP over a serial line. 270 1.3.2.2 skrll #pseudo-device sl 2 271 1.3.2.2 skrll 272 1.3.2.2 skrll ## PPP, the successor to SLIP. See pppd(8). 273 1.3.2.2 skrll #pseudo-device ppp 2 274 1.3.2.2 skrll 275 1.3.2.2 skrll ## PPP over Ethernet (RFC 2516) 276 1.3.2.2 skrll #pseudo-device pppoe 277 1.3.2.2 skrll 278 1.3.2.2 skrll ## Network "tunnel" device, allowing protocol stacks to run in the userland. 279 1.3.2.2 skrll ## This is used by the third-party user-mode "ppp" program, and others. 280 1.3.2.2 skrll #pseudo-device tun 4 281 1.3.2.2 skrll 282 1.3.2.2 skrll ## Generic L3 over IP tunnel 283 1.3.2.2 skrll #pseudo-device gre 2 # generic L3 over IP tunnel 284 1.3.2.2 skrll 285 1.3.2.2 skrll ## Berkeley Packet Filter, required to run RARPD. A generic C-language 286 1.3.2.2 skrll ## interface that allows selective examining of incoming packets. 287 1.3.2.2 skrll pseudo-device bpfilter 8 288 1.3.2.2 skrll 289 1.3.2.2 skrll ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 290 1.3.2.2 skrll ## one example of the use of the IP Filter. 291 1.3.2.2 skrll #pseudo-device ipfilter 292 1.3.2.2 skrll 293 1.3.2.2 skrll ## for IPv6 294 1.3.2.2 skrll #pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 295 1.3.2.2 skrll #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 296 1.3.2.2 skrll #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 297 1.3.2.2 skrll 298 1.3.2.2 skrll ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 299 1.3.2.2 skrll #pseudo-device vlan 300 1.3.2.2 skrll 301 1.3.2.2 skrll #### Audio and video devices 302 1.3.2.2 skrll 303 1.3.2.2 skrll ## /dev/audio support (`audiocs' plus `audio') 304 1.3.2.2 skrll ## 305 1.3.2.2 skrll audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 306 1.3.2.2 skrll audio0 at audiocs0 307 1.3.2.2 skrll 308 1.3.2.2 skrll ## Sun "tcx" accelerated color framebuffer. 309 1.3.2.2 skrll tcx0 at sbus? slot ? offset ? 310 1.3.2.2 skrll 311 1.3.2.2 skrll 312 1.3.2.2 skrll #### Other device configuration 313 1.3.2.2 skrll 314 1.3.2.2 skrll ## Pseudo ttys, required for network logins and programs like screen. 315 1.3.2.2 skrll 316 1.3.2.2 skrll pseudo-device pty # pseudo-terminals 317 1.3.2.2 skrll 318 1.3.2.2 skrll ## Random device, used to implement /dev/random (a source of random noise), 319 1.3.2.2 skrll ## and generate randomness for some kernel formulae. 320 1.3.2.2 skrll 321 1.3.2.2 skrll pseudo-device rnd 322 1.3.2.2 skrll 323 1.3.2.2 skrll # a pseudo device needed for Coda # also needs CODA (above) 324 1.3.2.2 skrll #pseudo-device vcoda 4 # coda minicache <-> venus comm. 325 1.3.2.2 skrll 326 1.3.2.2 skrll pseudo-device clockctl # user control of clock subsystem 327 1.3.2.2 skrll pseudo-device ksyms # /dev/ksyms 328
Indexes created Wed Oct 07 00:25:59 UTC 2026