tctrl.c revision 1.53.2.1 1 /* $NetBSD: tctrl.c,v 1.53.2.1 2012/04/17 00:06:54 yamt Exp $ */
2
3 /*-
4 * Copyright (c) 1998, 2005, 2006 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Matt Thomas.
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include <sys/cdefs.h>
33 __KERNEL_RCSID(0, "$NetBSD: tctrl.c,v 1.53.2.1 2012/04/17 00:06:54 yamt Exp $");
34
35 #include <sys/param.h>
36 #include <sys/systm.h>
37 #include <sys/ioctl.h>
38 #include <sys/select.h>
39 #include <sys/tty.h>
40 #include <sys/proc.h>
41 #include <sys/conf.h>
42 #include <sys/file.h>
43 #include <sys/uio.h>
44 #include <sys/kernel.h>
45 #include <sys/kthread.h>
46 #include <sys/syslog.h>
47 #include <sys/types.h>
48 #include <sys/device.h>
49 #include <sys/envsys.h>
50 #include <sys/poll.h>
51 #include <sys/kauth.h>
52
53 #include <machine/apmvar.h>
54 #include <machine/autoconf.h>
55 #include <sys/bus.h>
56 #include <machine/intr.h>
57 #include <machine/tctrl.h>
58
59 #include <sparc/dev/ts102reg.h>
60 #include <sparc/dev/tctrlvar.h>
61 #include <sparc/sparc/auxiotwo.h>
62 #include <sparc/sparc/auxreg.h>
63
64 #include <dev/sysmon/sysmonvar.h>
65 #include <dev/sysmon/sysmon_taskq.h>
66
67 #include "sysmon_envsys.h"
68
69 /*#define TCTRLDEBUG*/
70
71 /* disk spinner */
72 #include <sys/disk.h>
73 #include <dev/scsipi/sdvar.h>
74
75 /* ethernet carrier */
76 #include <net/if.h>
77 #include <net/if_dl.h>
78 #include <net/if_ether.h>
79 #include <net/if_media.h>
80 #include <dev/ic/lancevar.h>
81
82 extern struct cfdriver tctrl_cd;
83
84 dev_type_open(tctrlopen);
85 dev_type_close(tctrlclose);
86 dev_type_ioctl(tctrlioctl);
87 dev_type_poll(tctrlpoll);
88 dev_type_kqfilter(tctrlkqfilter);
89
90 const struct cdevsw tctrl_cdevsw = {
91 tctrlopen, tctrlclose, noread, nowrite, tctrlioctl,
92 nostop, notty, tctrlpoll, nommap, tctrlkqfilter,
93 };
94
95 static const char *tctrl_ext_statuses[16] = {
96 "main power available",
97 "internal battery attached",
98 "external battery attached",
99 "external VGA attached",
100 "external keyboard attached",
101 "external mouse attached",
102 "lid down",
103 "internal battery charging",
104 "external battery charging",
105 "internal battery discharging",
106 "external battery discharging",
107 };
108
109 struct tctrl_softc {
110 device_t sc_dev;
111 bus_space_tag_t sc_memt;
112 bus_space_handle_t sc_memh;
113 unsigned int sc_junk;
114 unsigned int sc_ext_status;
115 unsigned int sc_flags;
116 #define TCTRL_SEND_REQUEST 0x0001
117 #define TCTRL_APM_CTLOPEN 0x0002
118 uint32_t sc_wantdata;
119 uint32_t sc_ext_pending;
120 volatile uint16_t sc_lcdstate;
121 uint16_t sc_lcdwanted;
122
123 enum { TCTRL_IDLE, TCTRL_ARGS,
124 TCTRL_ACK, TCTRL_DATA } sc_state;
125 uint8_t sc_cmdbuf[16];
126 uint8_t sc_rspbuf[16];
127 uint8_t sc_bitport;
128 uint8_t sc_tft_on;
129 uint8_t sc_op;
130 uint8_t sc_cmdoff;
131 uint8_t sc_cmdlen;
132 uint8_t sc_rspoff;
133 uint8_t sc_rsplen;
134 /* APM stuff */
135 #define APM_NEVENTS 16
136 struct apm_event_info sc_event_list[APM_NEVENTS];
137 int sc_event_count;
138 int sc_event_ptr;
139 struct selinfo sc_rsel;
140
141 /* ENVSYS stuff */
142 #define ENVSYS_NUMSENSORS 3
143 struct evcnt sc_intrcnt; /* interrupt counting */
144 struct sysmon_envsys *sc_sme;
145 envsys_data_t sc_sensor[ENVSYS_NUMSENSORS];
146
147 struct sysmon_pswitch sc_sm_pbutton; /* power button */
148 struct sysmon_pswitch sc_sm_lid; /* lid state */
149 struct sysmon_pswitch sc_sm_ac; /* AC adaptor presence */
150 int sc_powerpressed;
151
152 /* hardware status stuff */
153 int sc_lid; /* 1 - open, 0 - closed */
154 int sc_power_state;
155 int sc_spl;
156
157 /*
158 * we call this when we detect connection or removal of an external
159 * monitor. 0 for no monitor, !=0 for monitor present
160 */
161 void (*sc_video_callback)(void *, int);
162 void *sc_video_callback_cookie;
163 int sc_extvga;
164
165 uint32_t sc_events;
166 lwp_t *sc_thread; /* event thread */
167 kmutex_t sc_requestlock;
168 };
169
170 #define TCTRL_STD_DEV 0
171 #define TCTRL_APMCTL_DEV 8
172
173 static int tctrl_match(device_t, cfdata_t, void *);
174 static void tctrl_attach(device_t, device_t, void *);
175 static void tctrl_write(struct tctrl_softc *, bus_size_t, uint8_t);
176 static uint8_t tctrl_read(struct tctrl_softc *, bus_size_t);
177 static void tctrl_write_data(struct tctrl_softc *, uint8_t);
178 static uint8_t tctrl_read_data(struct tctrl_softc *);
179 static int tctrl_intr(void *);
180 static void tctrl_setup_bitport(void);
181 static void tctrl_setup_bitport_nop(void);
182 static void tctrl_read_ext_status(void);
183 static void tctrl_read_event_status(struct tctrl_softc *);
184 static int tctrl_apm_record_event(struct tctrl_softc *, u_int);
185 static void tctrl_init_lcd(void);
186
187 static void tctrl_sensor_setup(struct tctrl_softc *);
188 static void tctrl_refresh(struct sysmon_envsys *, envsys_data_t *);
189
190 static void tctrl_power_button_pressed(void *);
191 static void tctrl_lid_state(struct tctrl_softc *);
192 static void tctrl_ac_state(struct tctrl_softc *);
193
194 static int tctrl_powerfail(void *);
195
196 static void tctrl_event_thread(void *);
197 void tctrl_update_lcd(struct tctrl_softc *);
198
199 static void tctrl_lock(struct tctrl_softc *);
200 static void tctrl_unlock(struct tctrl_softc *);
201
202 CFATTACH_DECL_NEW(tctrl, sizeof(struct tctrl_softc),
203 tctrl_match, tctrl_attach, NULL, NULL);
204
205 static int tadpole_request(struct tctrl_req *, int, int);
206
207 /* XXX wtf is this? see i386/apm.c */
208 int tctrl_apm_evindex;
209
210 static int
211 tctrl_match(device_t parent, cfdata_t cf, void *aux)
212 {
213 union obio_attach_args *uoba = aux;
214 struct sbus_attach_args *sa = &uoba->uoba_sbus;
215
216 if (uoba->uoba_isobio4 != 0) {
217 return (0);
218 }
219
220 /* Tadpole 3GX/3GS uses "uctrl" for the Tadpole Microcontroller
221 * (who's interface is off the TS102 PCMCIA controller but there
222 * exists a OpenProm for microcontroller interface).
223 */
224 return strcmp("uctrl", sa->sa_name) == 0;
225 }
226
227 static void
228 tctrl_attach(device_t parent, device_t self, void *aux)
229 {
230 struct tctrl_softc *sc = device_private(self);
231 union obio_attach_args *uoba = aux;
232 struct sbus_attach_args *sa = &uoba->uoba_sbus;
233 unsigned int i, v;
234
235 /* We're living on a sbus slot that looks like an obio that
236 * looks like an sbus slot.
237 */
238 sc->sc_dev = self;
239 sc->sc_memt = sa->sa_bustag;
240 if (sbus_bus_map(sc->sc_memt,
241 sa->sa_slot,
242 sa->sa_offset - TS102_REG_UCTRL_INT,
243 sa->sa_size,
244 BUS_SPACE_MAP_LINEAR, &sc->sc_memh) != 0) {
245 printf(": can't map registers\n");
246 return;
247 }
248
249 printf("\n");
250
251 sc->sc_tft_on = 1;
252
253 /* clear any pending data.
254 */
255 for (i = 0; i < 10000; i++) {
256 if ((TS102_UCTRL_STS_RXNE_STA &
257 tctrl_read(sc, TS102_REG_UCTRL_STS)) == 0) {
258 break;
259 }
260 v = tctrl_read(sc, TS102_REG_UCTRL_DATA);
261 tctrl_write(sc, TS102_REG_UCTRL_STS, TS102_UCTRL_STS_RXNE_STA);
262 }
263
264 if (sa->sa_nintr != 0) {
265 (void)bus_intr_establish(sc->sc_memt, sa->sa_pri, IPL_NONE,
266 tctrl_intr, sc);
267 evcnt_attach_dynamic(&sc->sc_intrcnt, EVCNT_TYPE_INTR, NULL,
268 device_xname(sc->sc_dev), "intr");
269 }
270
271 /* See what the external status is */
272 sc->sc_ext_status = 0;
273 tctrl_read_ext_status();
274 if (sc->sc_ext_status != 0) {
275 const char *sep;
276
277 printf("%s: ", device_xname(sc->sc_dev));
278 v = sc->sc_ext_status;
279 for (i = 0, sep = ""; v != 0; i++, v >>= 1) {
280 if (v & 1) {
281 printf("%s%s", sep, tctrl_ext_statuses[i]);
282 sep = ", ";
283 }
284 }
285 printf("\n");
286 }
287
288 /* Get a current of the control bitport */
289 tctrl_setup_bitport_nop();
290 tctrl_write(sc, TS102_REG_UCTRL_INT,
291 TS102_UCTRL_INT_RXNE_REQ|TS102_UCTRL_INT_RXNE_MSK);
292 sc->sc_lid = (sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN) == 0;
293 sc->sc_power_state = PWR_RESUME;
294
295 sc->sc_extvga = (sc->sc_ext_status &
296 TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED) != 0;
297 sc->sc_video_callback = NULL;
298
299
300 sc->sc_wantdata = 0;
301 sc->sc_event_count = 0;
302 sc->sc_ext_pending = 0;
303 sc->sc_ext_pending = 0;
304
305 mutex_init(&sc->sc_requestlock, MUTEX_DEFAULT, IPL_NONE);
306 selinit(&sc->sc_rsel);
307
308 /* setup sensors and register the power button */
309 tctrl_sensor_setup(sc);
310 tctrl_lid_state(sc);
311 tctrl_ac_state(sc);
312
313 /* initialize the LCD */
314 tctrl_init_lcd();
315
316 /* initialize sc_lcdstate */
317 sc->sc_lcdstate = 0;
318 sc->sc_lcdwanted = 0;
319 tadpole_set_lcd(2, 0);
320
321 /* fire up the LCD event thread */
322 sc->sc_events = 0;
323
324 if (kthread_create(PRI_NONE, 0, NULL, tctrl_event_thread, sc,
325 &sc->sc_thread, "%s", device_xname(sc->sc_dev)) != 0) {
326 printf("%s: unable to create event kthread",
327 device_xname(sc->sc_dev));
328 }
329 }
330
331 static int
332 tctrl_intr(void *arg)
333 {
334 struct tctrl_softc *sc = arg;
335 unsigned int v, d;
336 int progress = 0;
337
338 again:
339 /* find out the cause(s) of the interrupt */
340 v = tctrl_read(sc, TS102_REG_UCTRL_STS) & TS102_UCTRL_STS_MASK;
341
342 /* clear the cause(s) of the interrupt */
343 tctrl_write(sc, TS102_REG_UCTRL_STS, v);
344
345 v &= ~(TS102_UCTRL_STS_RXO_STA|TS102_UCTRL_STS_TXE_STA);
346 if (sc->sc_cmdoff >= sc->sc_cmdlen) {
347 v &= ~TS102_UCTRL_STS_TXNF_STA;
348 if (tctrl_read(sc, TS102_REG_UCTRL_INT) &
349 TS102_UCTRL_INT_TXNF_REQ) {
350 tctrl_write(sc, TS102_REG_UCTRL_INT, 0);
351 progress = 1;
352 }
353 }
354 if ((v == 0) && ((sc->sc_flags & TCTRL_SEND_REQUEST) == 0 ||
355 sc->sc_state != TCTRL_IDLE)) {
356 wakeup(sc);
357 return progress;
358 }
359
360 progress = 1;
361 if (v & TS102_UCTRL_STS_RXNE_STA) {
362 d = tctrl_read_data(sc);
363 switch (sc->sc_state) {
364 case TCTRL_IDLE:
365 if (d == 0xfa) {
366 /*
367 * external event,
368 * set a flag and wakeup the event thread
369 */
370 sc->sc_ext_pending = 1;
371 } else {
372 printf("%s: (op=0x%02x): unexpected data (0x%02x)\n",
373 device_xname(sc->sc_dev), sc->sc_op, d);
374 }
375 goto again;
376 case TCTRL_ACK:
377 if (d != 0xfe) {
378 printf("%s: (op=0x%02x): unexpected ack value (0x%02x)\n",
379 device_xname(sc->sc_dev), sc->sc_op, d);
380 }
381 #ifdef TCTRLDEBUG
382 printf(" ack=0x%02x", d);
383 #endif
384 sc->sc_rsplen--;
385 sc->sc_rspoff = 0;
386 sc->sc_state = sc->sc_rsplen ? TCTRL_DATA : TCTRL_IDLE;
387 sc->sc_wantdata = sc->sc_rsplen ? 1 : 0;
388 #ifdef TCTRLDEBUG
389 if (sc->sc_rsplen > 0) {
390 printf(" [data(%u)]", sc->sc_rsplen);
391 } else {
392 printf(" [idle]\n");
393 }
394 #endif
395 goto again;
396 case TCTRL_DATA:
397 sc->sc_rspbuf[sc->sc_rspoff++] = d;
398 #ifdef TCTRLDEBUG
399 printf(" [%d]=0x%02x", sc->sc_rspoff-1, d);
400 #endif
401 if (sc->sc_rspoff == sc->sc_rsplen) {
402 #ifdef TCTRLDEBUG
403 printf(" [idle]\n");
404 #endif
405 sc->sc_state = TCTRL_IDLE;
406 sc->sc_wantdata = 0;
407 }
408 goto again;
409 default:
410 printf("%s: (op=0x%02x): unexpected data (0x%02x) in state %d\n",
411 device_xname(sc->sc_dev), sc->sc_op, d, sc->sc_state);
412 goto again;
413 }
414 }
415 if ((sc->sc_state == TCTRL_IDLE && sc->sc_wantdata == 0) ||
416 sc->sc_flags & TCTRL_SEND_REQUEST) {
417 if (sc->sc_flags & TCTRL_SEND_REQUEST) {
418 sc->sc_flags &= ~TCTRL_SEND_REQUEST;
419 sc->sc_wantdata = 1;
420 }
421 if (sc->sc_cmdlen > 0) {
422 tctrl_write(sc, TS102_REG_UCTRL_INT,
423 tctrl_read(sc, TS102_REG_UCTRL_INT)
424 |TS102_UCTRL_INT_TXNF_MSK
425 |TS102_UCTRL_INT_TXNF_REQ);
426 v = tctrl_read(sc, TS102_REG_UCTRL_STS);
427 }
428 }
429 if ((sc->sc_cmdoff < sc->sc_cmdlen) && (v & TS102_UCTRL_STS_TXNF_STA)) {
430 tctrl_write_data(sc, sc->sc_cmdbuf[sc->sc_cmdoff++]);
431 #ifdef TCTRLDEBUG
432 if (sc->sc_cmdoff == 1) {
433 printf("%s: op=0x%02x(l=%u)", device_xname(sc->sc_dev),
434 sc->sc_cmdbuf[0], sc->sc_rsplen);
435 } else {
436 printf(" [%d]=0x%02x", sc->sc_cmdoff-1,
437 sc->sc_cmdbuf[sc->sc_cmdoff-1]);
438 }
439 #endif
440 if (sc->sc_cmdoff == sc->sc_cmdlen) {
441 sc->sc_state = sc->sc_rsplen ? TCTRL_ACK : TCTRL_IDLE;
442 #ifdef TCTRLDEBUG
443 printf(" %s", sc->sc_rsplen ? "[ack]" : "[idle]\n");
444 #endif
445 if (sc->sc_cmdoff == 1) {
446 sc->sc_op = sc->sc_cmdbuf[0];
447 }
448 tctrl_write(sc, TS102_REG_UCTRL_INT,
449 tctrl_read(sc, TS102_REG_UCTRL_INT)
450 & (~TS102_UCTRL_INT_TXNF_MSK
451 |TS102_UCTRL_INT_TXNF_REQ));
452 } else if (sc->sc_state == TCTRL_IDLE) {
453 sc->sc_op = sc->sc_cmdbuf[0];
454 sc->sc_state = TCTRL_ARGS;
455 #ifdef TCTRLDEBUG
456 printf(" [args]");
457 #endif
458 }
459 }
460 goto again;
461 }
462
463 static void
464 tctrl_setup_bitport_nop(void)
465 {
466 struct tctrl_softc *sc;
467 struct tctrl_req req;
468 int s;
469
470 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
471 req.cmdbuf[0] = TS102_OP_CTL_BITPORT;
472 req.cmdbuf[1] = 0xff;
473 req.cmdbuf[2] = 0x00;
474 req.cmdlen = 3;
475 req.rsplen = 2;
476 tadpole_request(&req, 1, 0);
477 s = splts102();
478 sc->sc_bitport = (req.rspbuf[0] & req.cmdbuf[1]) ^ req.cmdbuf[2];
479 splx(s);
480 }
481
482 static void
483 tctrl_setup_bitport(void)
484 {
485 struct tctrl_softc *sc;
486 struct tctrl_req req;
487 int s;
488
489 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
490 s = splts102();
491 req.cmdbuf[2] = 0;
492 if ((sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN)
493 || (!sc->sc_tft_on)) {
494 req.cmdbuf[2] = TS102_BITPORT_TFTPWR;
495 }
496 req.cmdbuf[0] = TS102_OP_CTL_BITPORT;
497 req.cmdbuf[1] = ~TS102_BITPORT_TFTPWR;
498 req.cmdlen = 3;
499 req.rsplen = 2;
500 tadpole_request(&req, 1, 0);
501 s = splts102();
502 sc->sc_bitport = (req.rspbuf[0] & req.cmdbuf[1]) ^ req.cmdbuf[2];
503 splx(s);
504 }
505
506 /*
507 * The tadpole microcontroller is not preprogrammed with icon
508 * representations. The machine boots with the DC-IN light as
509 * a blank (all 0x00) and the other lights, as 4 rows of horizontal
510 * bars. The below code initializes the icons in the system to
511 * sane values. Some of these icons could be used for any purpose
512 * desired, namely the pcmcia, LAN and WAN lights. For the disk spinner,
513 * only the backslash is unprogrammed. (sigh)
514 *
515 * programming the icons is simple. It is a 5x8 matrix, which each row a
516 * bitfield in the order 0x10 0x08 0x04 0x02 0x01.
517 */
518
519 static void
520 tctrl_init_lcd(void)
521 {
522 struct tctrl_req req;
523
524 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
525 req.cmdlen = 11;
526 req.rsplen = 1;
527 req.cmdbuf[1] = 0x08; /*len*/
528 req.cmdbuf[2] = TS102_BLK_OFF_DEF_DC_GOOD;
529 req.cmdbuf[3] = 0x00; /* ..... */
530 req.cmdbuf[4] = 0x00; /* ..... */
531 req.cmdbuf[5] = 0x1f; /* XXXXX */
532 req.cmdbuf[6] = 0x00; /* ..... */
533 req.cmdbuf[7] = 0x15; /* X.X.X */
534 req.cmdbuf[8] = 0x00; /* ..... */
535 req.cmdbuf[9] = 0x00; /* ..... */
536 req.cmdbuf[10] = 0x00; /* ..... */
537 tadpole_request(&req, 1, 0);
538
539 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
540 req.cmdlen = 11;
541 req.rsplen = 1;
542 req.cmdbuf[1] = 0x08; /*len*/
543 req.cmdbuf[2] = TS102_BLK_OFF_DEF_BACKSLASH;
544 req.cmdbuf[3] = 0x00; /* ..... */
545 req.cmdbuf[4] = 0x10; /* X.... */
546 req.cmdbuf[5] = 0x08; /* .X... */
547 req.cmdbuf[6] = 0x04; /* ..X.. */
548 req.cmdbuf[7] = 0x02; /* ...X. */
549 req.cmdbuf[8] = 0x01; /* ....X */
550 req.cmdbuf[9] = 0x00; /* ..... */
551 req.cmdbuf[10] = 0x00; /* ..... */
552 tadpole_request(&req, 1, 0);
553
554 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
555 req.cmdlen = 11;
556 req.rsplen = 1;
557 req.cmdbuf[1] = 0x08; /*len*/
558 req.cmdbuf[2] = TS102_BLK_OFF_DEF_WAN1;
559 req.cmdbuf[3] = 0x0c; /* .XXX. */
560 req.cmdbuf[4] = 0x16; /* X.XX. */
561 req.cmdbuf[5] = 0x10; /* X.... */
562 req.cmdbuf[6] = 0x15; /* X.X.X */
563 req.cmdbuf[7] = 0x10; /* X.... */
564 req.cmdbuf[8] = 0x16; /* X.XX. */
565 req.cmdbuf[9] = 0x0c; /* .XXX. */
566 req.cmdbuf[10] = 0x00; /* ..... */
567 tadpole_request(&req, 1, 0);
568
569 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
570 req.cmdlen = 11;
571 req.rsplen = 1;
572 req.cmdbuf[1] = 0x08; /*len*/
573 req.cmdbuf[2] = TS102_BLK_OFF_DEF_WAN2;
574 req.cmdbuf[3] = 0x0c; /* .XXX. */
575 req.cmdbuf[4] = 0x0d; /* .XX.X */
576 req.cmdbuf[5] = 0x01; /* ....X */
577 req.cmdbuf[6] = 0x15; /* X.X.X */
578 req.cmdbuf[7] = 0x01; /* ....X */
579 req.cmdbuf[8] = 0x0d; /* .XX.X */
580 req.cmdbuf[9] = 0x0c; /* .XXX. */
581 req.cmdbuf[10] = 0x00; /* ..... */
582 tadpole_request(&req, 1, 0);
583
584 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
585 req.cmdlen = 11;
586 req.rsplen = 1;
587 req.cmdbuf[1] = 0x08; /*len*/
588 req.cmdbuf[2] = TS102_BLK_OFF_DEF_LAN1;
589 req.cmdbuf[3] = 0x00; /* ..... */
590 req.cmdbuf[4] = 0x04; /* ..X.. */
591 req.cmdbuf[5] = 0x08; /* .X... */
592 req.cmdbuf[6] = 0x13; /* X..XX */
593 req.cmdbuf[7] = 0x08; /* .X... */
594 req.cmdbuf[8] = 0x04; /* ..X.. */
595 req.cmdbuf[9] = 0x00; /* ..... */
596 req.cmdbuf[10] = 0x00; /* ..... */
597 tadpole_request(&req, 1, 0);
598
599 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
600 req.cmdlen = 11;
601 req.rsplen = 1;
602 req.cmdbuf[1] = 0x08; /*len*/
603 req.cmdbuf[2] = TS102_BLK_OFF_DEF_LAN2;
604 req.cmdbuf[3] = 0x00; /* ..... */
605 req.cmdbuf[4] = 0x04; /* ..X.. */
606 req.cmdbuf[5] = 0x02; /* ...X. */
607 req.cmdbuf[6] = 0x19; /* XX..X */
608 req.cmdbuf[7] = 0x02; /* ...X. */
609 req.cmdbuf[8] = 0x04; /* ..X.. */
610 req.cmdbuf[9] = 0x00; /* ..... */
611 req.cmdbuf[10] = 0x00; /* ..... */
612 tadpole_request(&req, 1, 0);
613
614 req.cmdbuf[0] = TS102_OP_BLK_DEF_SPCL_CHAR;
615 req.cmdlen = 11;
616 req.rsplen = 1;
617 req.cmdbuf[1] = 0x08; /*len*/
618 req.cmdbuf[2] = TS102_BLK_OFF_DEF_PCMCIA;
619 req.cmdbuf[3] = 0x00; /* ..... */
620 req.cmdbuf[4] = 0x0c; /* .XXX. */
621 req.cmdbuf[5] = 0x1f; /* XXXXX */
622 req.cmdbuf[6] = 0x1f; /* XXXXX */
623 req.cmdbuf[7] = 0x1f; /* XXXXX */
624 req.cmdbuf[8] = 0x1f; /* XXXXX */
625 req.cmdbuf[9] = 0x00; /* ..... */
626 req.cmdbuf[10] = 0x00; /* ..... */
627 tadpole_request(&req, 1, 0);
628 }
629
630 /* sc_lcdwanted -> lcd_state */
631 void
632 tctrl_update_lcd(struct tctrl_softc *sc)
633 {
634 struct tctrl_req req;
635 int s;
636
637 s = splhigh();
638 if (sc->sc_lcdwanted == sc->sc_lcdstate) {
639 splx(s);
640 return;
641 }
642 sc->sc_lcdstate = sc->sc_lcdwanted;
643 splx(s);
644
645 /*
646 * the mask setup on this particular command is *very* bizzare
647 * and totally undocumented.
648 */
649 req.cmdbuf[0] = TS102_OP_CTL_LCD;
650
651 /* leave caps-lock alone */
652 req.cmdbuf[2] = (u_int8_t)(sc->sc_lcdstate & 0xfe);
653 req.cmdbuf[3] = (u_int8_t)((sc->sc_lcdstate & 0x100)>>8);
654
655 req.cmdbuf[1] = 1;
656 req.cmdbuf[4] = 0;
657
658
659 /* XXX this thing is weird.... */
660 req.cmdlen = 3;
661 req.rsplen = 2;
662
663 /* below are the values one would expect but which won't work */
664 #if 0
665 req.cmdlen = 5;
666 req.rsplen = 4;
667 #endif
668 tadpole_request(&req, 1, 0);
669 }
670
671
672 /*
673 * set the blinken-lights on the lcd. what:
674 * what = 0 off, what = 1 on, what = 2 toggle
675 */
676
677 void
678 tadpole_set_lcd(int what, unsigned short which)
679 {
680 struct tctrl_softc *sc;
681 int s;
682
683 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
684
685 s = splhigh();
686 switch (what) {
687 case 0:
688 sc->sc_lcdwanted &= ~which;
689 break;
690 case 1:
691 sc->sc_lcdwanted |= which;
692 break;
693 case 2:
694 sc->sc_lcdwanted ^= which;
695 break;
696 }
697 splx(s);
698 }
699
700 static void
701 tctrl_read_ext_status(void)
702 {
703 struct tctrl_softc *sc;
704 struct tctrl_req req;
705 int s;
706
707 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
708 req.cmdbuf[0] = TS102_OP_RD_EXT_STATUS;
709 req.cmdlen = 1;
710 req.rsplen = 3;
711 #ifdef TCTRLDEBUG
712 printf("pre read: sc->sc_ext_status = 0x%x\n", sc->sc_ext_status);
713 #endif
714 tadpole_request(&req, 1, 0);
715 s = splts102();
716 sc->sc_ext_status = (req.rspbuf[0] << 8) + req.rspbuf[1];
717 splx(s);
718 #ifdef TCTRLDEBUG
719 printf("post read: sc->sc_ext_status = 0x%x\n", sc->sc_ext_status);
720 #endif
721 }
722
723 /*
724 * return 0 if the user will notice and handle the event,
725 * return 1 if the kernel driver should do so.
726 */
727 static int
728 tctrl_apm_record_event(struct tctrl_softc *sc, u_int event_type)
729 {
730 struct apm_event_info *evp;
731
732 if ((sc->sc_flags & TCTRL_APM_CTLOPEN) &&
733 (sc->sc_event_count < APM_NEVENTS)) {
734 evp = &sc->sc_event_list[sc->sc_event_ptr];
735 sc->sc_event_count++;
736 sc->sc_event_ptr++;
737 sc->sc_event_ptr %= APM_NEVENTS;
738 evp->type = event_type;
739 evp->index = ++tctrl_apm_evindex;
740 selnotify(&sc->sc_rsel, 0, 0);
741 return(sc->sc_flags & TCTRL_APM_CTLOPEN) ? 0 : 1;
742 }
743 return(1);
744 }
745
746 static void
747 tctrl_read_event_status(struct tctrl_softc *sc)
748 {
749 struct tctrl_req req;
750 int s, lid;
751 uint32_t v;
752
753 req.cmdbuf[0] = TS102_OP_RD_EVENT_STATUS;
754 req.cmdlen = 1;
755 req.rsplen = 3;
756 tadpole_request(&req, 1, 0);
757 s = splts102();
758 v = req.rspbuf[0] * 256 + req.rspbuf[1];
759 #ifdef TCTRLDEBUG
760 printf("event: %x\n",v);
761 #endif
762 if (v & TS102_EVENT_STATUS_POWERON_BTN_PRESSED) {
763 printf("%s: Power button pressed\n",device_xname(sc->sc_dev));
764 tctrl_powerfail(sc);
765 }
766 if (v & TS102_EVENT_STATUS_SHUTDOWN_REQUEST) {
767 printf("%s: SHUTDOWN REQUEST!\n", device_xname(sc->sc_dev));
768 tctrl_powerfail(sc);
769 }
770 if (v & TS102_EVENT_STATUS_VERY_LOW_POWER_WARNING) {
771 /*printf("%s: VERY LOW POWER WARNING!\n", device_xname(sc->sc_dev));*/
772 /* according to a tadpole header, and observation */
773 #ifdef TCTRLDEBUG
774 printf("%s: Battery charge level change\n",
775 device_xname(sc->sc_dev));
776 #endif
777 }
778 if (v & TS102_EVENT_STATUS_LOW_POWER_WARNING) {
779 if (tctrl_apm_record_event(sc, APM_BATTERY_LOW))
780 printf("%s: LOW POWER WARNING!\n", device_xname(sc->sc_dev));
781 }
782 if (v & TS102_EVENT_STATUS_DC_STATUS_CHANGE) {
783 splx(s);
784 tctrl_read_ext_status();
785 tctrl_ac_state(sc);
786 s = splts102();
787 if (tctrl_apm_record_event(sc, APM_POWER_CHANGE))
788 printf("%s: main power %s\n", device_xname(sc->sc_dev),
789 (sc->sc_ext_status &
790 TS102_EXT_STATUS_MAIN_POWER_AVAILABLE) ?
791 "restored" : "removed");
792 }
793 if (v & TS102_EVENT_STATUS_LID_STATUS_CHANGE) {
794 splx(s);
795 tctrl_read_ext_status();
796 tctrl_lid_state(sc);
797 tctrl_setup_bitport();
798 #ifdef TCTRLDEBUG
799 printf("%s: lid %s\n", device_xname(sc->sc_dev),
800 (sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN)
801 ? "closed" : "opened");
802 #endif
803 lid = (sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN) == 0;
804 }
805 if (v & TS102_EVENT_STATUS_EXTERNAL_VGA_STATUS_CHANGE) {
806 int vga;
807 splx(s);
808 tctrl_read_ext_status();
809 vga = (sc->sc_ext_status &
810 TS102_EXT_STATUS_EXTERNAL_VGA_ATTACHED) != 0;
811 if (vga != sc->sc_extvga) {
812 sc->sc_extvga = vga;
813 if (sc->sc_video_callback != NULL) {
814 sc->sc_video_callback(
815 sc->sc_video_callback_cookie,
816 sc->sc_extvga);
817 }
818 }
819 }
820 #ifdef DIAGNOSTIC
821 if (v & TS102_EVENT_STATUS_EXT_MOUSE_STATUS_CHANGE) {
822 splx(s);
823 tctrl_read_ext_status();
824 if (sc->sc_ext_status &
825 TS102_EXT_STATUS_EXTERNAL_MOUSE_ATTACHED) {
826 printf("tctrl: external mouse detected\n");
827 }
828 }
829 #endif
830 sc->sc_ext_pending = 0;
831 splx(s);
832 }
833
834 static void
835 tctrl_lock(struct tctrl_softc *sc)
836 {
837
838 mutex_enter(&sc->sc_requestlock);
839 }
840
841 static void
842 tctrl_unlock(struct tctrl_softc *sc)
843 {
844
845 mutex_exit(&sc->sc_requestlock);
846 }
847
848 int
849 tadpole_request(struct tctrl_req *req, int spin, int sleep)
850 {
851 struct tctrl_softc *sc;
852 int i, s;
853
854 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
855 if (!sc)
856 return ENODEV;
857
858 tctrl_lock(sc);
859
860 if (spin)
861 s = splhigh();
862 else
863 s = splts102();
864 sc->sc_flags |= TCTRL_SEND_REQUEST;
865 memcpy(sc->sc_cmdbuf, req->cmdbuf, req->cmdlen);
866 #ifdef DIAGNOSTIC
867 if (sc->sc_wantdata != 0) {
868 splx(s);
869 printf("tctrl: we lost the race\n");
870 tctrl_unlock(sc);
871 return EAGAIN;
872 }
873 #endif
874 sc->sc_wantdata = 1;
875 sc->sc_rsplen = req->rsplen;
876 sc->sc_cmdlen = req->cmdlen;
877 sc->sc_cmdoff = sc->sc_rspoff = 0;
878
879 /* we spin for certain commands, like poweroffs */
880 if (spin) {
881 /* for (i = 0; i < 30000; i++) {*/
882 i = 0;
883 while ((sc->sc_wantdata == 1) && (i < 30000)) {
884 tctrl_intr(sc);
885 DELAY(1);
886 i++;
887 }
888 #ifdef DIAGNOSTIC
889 if (i >= 30000) {
890 printf("tctrl: timeout busy waiting for micro controller request!\n");
891 sc->sc_wantdata = 0;
892 splx(s);
893 tctrl_unlock(sc);
894 return EAGAIN;
895 }
896 #endif
897 } else {
898 int timeout = 5 * (sc->sc_rsplen + sc->sc_cmdlen);
899 tctrl_intr(sc);
900 i = 0;
901 while (((sc->sc_rspoff != sc->sc_rsplen) ||
902 (sc->sc_cmdoff != sc->sc_cmdlen)) &&
903 (i < timeout))
904 if (sleep) {
905 tsleep(sc, PWAIT, "tctrl_data", 15);
906 i++;
907 } else
908 DELAY(1);
909 #ifdef DIAGNOSTIC
910 if (i >= timeout) {
911 printf("tctrl: timeout waiting for microcontroller request\n");
912 sc->sc_wantdata = 0;
913 splx(s);
914 tctrl_unlock(sc);
915 return EAGAIN;
916 }
917 #endif
918 }
919 /*
920 * we give the user a reasonable amount of time for a command
921 * to complete. If it doesn't complete in time, we hand them
922 * garbage. This is here to stop things like setting the
923 * rsplen too long, and sleeping forever in a CMD_REQ ioctl.
924 */
925 sc->sc_wantdata = 0;
926 memcpy(req->rspbuf, sc->sc_rspbuf, req->rsplen);
927 splx(s);
928
929 tctrl_unlock(sc);
930 return 0;
931 }
932
933 void
934 tadpole_powerdown(void)
935 {
936 struct tctrl_req req;
937
938 req.cmdbuf[0] = TS102_OP_ADMIN_POWER_OFF;
939 req.cmdlen = 1;
940 req.rsplen = 1;
941 tadpole_request(&req, 1, 0);
942 }
943
944 void
945 tadpole_set_video(int enabled)
946 {
947 struct tctrl_softc *sc;
948 struct tctrl_req req;
949 int s;
950
951 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
952 while (sc->sc_wantdata != 0)
953 DELAY(1);
954 s = splts102();
955 if ((sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN && !enabled)
956 || (sc->sc_tft_on)) {
957 req.cmdbuf[2] = TS102_BITPORT_TFTPWR;
958 } else {
959 req.cmdbuf[2] = 0;
960 }
961 req.cmdbuf[0] = TS102_OP_CTL_BITPORT;
962 req.cmdbuf[1] = ~TS102_BITPORT_TFTPWR;
963 req.cmdlen = 3;
964 req.rsplen = 2;
965
966 if ((sc->sc_tft_on && !enabled) || (!sc->sc_tft_on && enabled)) {
967 sc->sc_tft_on = enabled;
968 if (sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN) {
969 splx(s);
970 return;
971 }
972 tadpole_request(&req, 1, 0);
973 sc->sc_bitport =
974 (req.rspbuf[0] & req.cmdbuf[1]) ^ req.cmdbuf[2];
975 }
976 splx(s);
977 }
978
979 static void
980 tctrl_write_data(struct tctrl_softc *sc, uint8_t v)
981 {
982 unsigned int i;
983
984 for (i = 0; i < 100; i++) {
985 if (TS102_UCTRL_STS_TXNF_STA &
986 tctrl_read(sc, TS102_REG_UCTRL_STS))
987 break;
988 }
989 tctrl_write(sc, TS102_REG_UCTRL_DATA, v);
990 }
991
992 static uint8_t
993 tctrl_read_data(struct tctrl_softc *sc)
994 {
995 unsigned int i, v;
996
997 for (i = 0; i < 100000; i++) {
998 if (TS102_UCTRL_STS_RXNE_STA &
999 tctrl_read(sc, TS102_REG_UCTRL_STS))
1000 break;
1001 DELAY(1);
1002 }
1003
1004 v = tctrl_read(sc, TS102_REG_UCTRL_DATA);
1005 tctrl_write(sc, TS102_REG_UCTRL_STS, TS102_UCTRL_STS_RXNE_STA);
1006 return v;
1007 }
1008
1009 static uint8_t
1010 tctrl_read(struct tctrl_softc *sc, bus_size_t off)
1011 {
1012
1013 sc->sc_junk = bus_space_read_1(sc->sc_memt, sc->sc_memh, off);
1014 return sc->sc_junk;
1015 }
1016
1017 static void
1018 tctrl_write(struct tctrl_softc *sc, bus_size_t off, uint8_t v)
1019 {
1020
1021 sc->sc_junk = v;
1022 bus_space_write_1(sc->sc_memt, sc->sc_memh, off, v);
1023 }
1024
1025 int
1026 tctrlopen(dev_t dev, int flags, int mode, struct lwp *l)
1027 {
1028 int unit = (minor(dev)&0xf0);
1029 int ctl = (minor(dev)&0x0f);
1030 struct tctrl_softc *sc;
1031
1032 if (unit >= tctrl_cd.cd_ndevs)
1033 return(ENXIO);
1034 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
1035 if (!sc)
1036 return(ENXIO);
1037
1038 switch (ctl) {
1039 case TCTRL_STD_DEV:
1040 break;
1041 case TCTRL_APMCTL_DEV:
1042 if (!(flags & FWRITE))
1043 return(EINVAL);
1044 if (sc->sc_flags & TCTRL_APM_CTLOPEN)
1045 return(EBUSY);
1046 sc->sc_flags |= TCTRL_APM_CTLOPEN;
1047 break;
1048 default:
1049 return(ENXIO);
1050 break;
1051 }
1052
1053 return(0);
1054 }
1055
1056 int
1057 tctrlclose(dev_t dev, int flags, int mode, struct lwp *l)
1058 {
1059 int ctl = (minor(dev)&0x0f);
1060 struct tctrl_softc *sc;
1061
1062 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
1063 if (!sc)
1064 return(ENXIO);
1065
1066 switch (ctl) {
1067 case TCTRL_STD_DEV:
1068 break;
1069 case TCTRL_APMCTL_DEV:
1070 sc->sc_flags &= ~TCTRL_APM_CTLOPEN;
1071 break;
1072 }
1073 return(0);
1074 }
1075
1076 int
1077 tctrlioctl(dev_t dev, u_long cmd, void *data, int flags, struct lwp *l)
1078 {
1079 struct tctrl_req req, *reqn;
1080 struct tctrl_pwr *pwrreq;
1081 struct apm_power_info *powerp;
1082 struct apm_event_info *evp;
1083 struct tctrl_softc *sc;
1084 int i;
1085 uint8_t c;
1086
1087 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
1088 if (!sc)
1089 return ENXIO;
1090
1091 switch (cmd) {
1092
1093 case APM_IOC_STANDBY:
1094 /* turn off backlight and so on ? */
1095
1096 return 0; /* for now */
1097
1098 case APM_IOC_SUSPEND:
1099 /* not sure what to do here - we can't really suspend */
1100
1101 return 0; /* for now */
1102
1103 case OAPM_IOC_GETPOWER:
1104 case APM_IOC_GETPOWER:
1105 powerp = (struct apm_power_info *)data;
1106 req.cmdbuf[0] = TS102_OP_RD_INT_CHARGE_RATE;
1107 req.cmdlen = 1;
1108 req.rsplen = 2;
1109 tadpole_request(&req, 0, l->l_proc ? 1 : 0);
1110 if (req.rspbuf[0] > 0x00)
1111 powerp->battery_state = APM_BATT_CHARGING;
1112 req.cmdbuf[0] = TS102_OP_RD_INT_CHARGE_LEVEL;
1113 req.cmdlen = 1;
1114 req.rsplen = 3;
1115 tadpole_request(&req, 0, l->l_proc ? 1 : 0);
1116 c = req.rspbuf[0];
1117 powerp->battery_life = c;
1118 if (c > 0x70) /* the tadpole sometimes dips below zero, and */
1119 c = 0; /* into the 255 range. */
1120 powerp->minutes_left = (45 * c) / 100; /* XXX based on 45 min */
1121 if (powerp->battery_state != APM_BATT_CHARGING) {
1122 if (c < 0x20)
1123 powerp->battery_state = APM_BATT_CRITICAL;
1124 else if (c < 0x40)
1125 powerp->battery_state = APM_BATT_LOW;
1126 else if (c < 0x66)
1127 powerp->battery_state = APM_BATT_HIGH;
1128 else
1129 powerp->battery_state = APM_BATT_UNKNOWN;
1130 }
1131
1132 if (sc->sc_ext_status & TS102_EXT_STATUS_MAIN_POWER_AVAILABLE)
1133 powerp->ac_state = APM_AC_ON;
1134 else
1135 powerp->ac_state = APM_AC_OFF;
1136 break;
1137
1138 case APM_IOC_NEXTEVENT:
1139 if (!sc->sc_event_count)
1140 return EAGAIN;
1141
1142 evp = (struct apm_event_info *)data;
1143 i = sc->sc_event_ptr + APM_NEVENTS - sc->sc_event_count;
1144 i %= APM_NEVENTS;
1145 *evp = sc->sc_event_list[i];
1146 sc->sc_event_count--;
1147 return(0);
1148
1149 /* this ioctl assumes the caller knows exactly what he is doing */
1150 case TCTRL_CMD_REQ:
1151 reqn = (struct tctrl_req *)data;
1152 if ((i = kauth_authorize_device_passthru(l->l_cred,
1153 dev, KAUTH_REQ_DEVICE_RAWIO_PASSTHRU_ALL, data)) != 0 &&
1154 (reqn->cmdbuf[0] == TS102_OP_CTL_BITPORT ||
1155 (reqn->cmdbuf[0] >= TS102_OP_CTL_WATCHDOG &&
1156 reqn->cmdbuf[0] <= TS102_OP_CTL_SECURITY_KEY) ||
1157 reqn->cmdbuf[0] == TS102_OP_CTL_TIMEZONE ||
1158 reqn->cmdbuf[0] == TS102_OP_CTL_DIAGNOSTIC_MODE ||
1159 reqn->cmdbuf[0] == TS102_OP_CMD_SOFTWARE_RESET ||
1160 (reqn->cmdbuf[0] >= TS102_OP_CMD_SET_RTC &&
1161 reqn->cmdbuf[0] < TS102_OP_RD_INT_CHARGE_LEVEL) ||
1162 reqn->cmdbuf[0] > TS102_OP_RD_EXT_CHARGE_LEVEL))
1163 return(i);
1164 tadpole_request(reqn, 0, l->l_proc ? 1 : 0);
1165 break;
1166 /* serial power mode (via auxiotwo) */
1167 case TCTRL_SERIAL_PWR:
1168 pwrreq = (struct tctrl_pwr *)data;
1169 if (pwrreq->rw)
1170 pwrreq->state = auxiotwoserialgetapm();
1171 else
1172 auxiotwoserialsetapm(pwrreq->state);
1173 break;
1174
1175 /* modem power mode (via auxio) */
1176 case TCTRL_MODEM_PWR:
1177 return(EOPNOTSUPP); /* for now */
1178 break;
1179
1180
1181 default:
1182 return (ENOTTY);
1183 }
1184 return (0);
1185 }
1186
1187 int
1188 tctrlpoll(dev_t dev, int events, struct lwp *l)
1189 {
1190 struct tctrl_softc *sc = device_lookup_private(&tctrl_cd,
1191 TCTRL_STD_DEV);
1192 int revents = 0;
1193
1194 if (events & (POLLIN | POLLRDNORM)) {
1195 if (sc->sc_event_count)
1196 revents |= events & (POLLIN | POLLRDNORM);
1197 else
1198 selrecord(l, &sc->sc_rsel);
1199 }
1200
1201 return (revents);
1202 }
1203
1204 static void
1205 filt_tctrlrdetach(struct knote *kn)
1206 {
1207 struct tctrl_softc *sc = kn->kn_hook;
1208 int s;
1209
1210 s = splts102();
1211 SLIST_REMOVE(&sc->sc_rsel.sel_klist, kn, knote, kn_selnext);
1212 splx(s);
1213 }
1214
1215 static int
1216 filt_tctrlread(struct knote *kn, long hint)
1217 {
1218 struct tctrl_softc *sc = kn->kn_hook;
1219
1220 kn->kn_data = sc->sc_event_count;
1221 return (kn->kn_data > 0);
1222 }
1223
1224 static const struct filterops tctrlread_filtops =
1225 { 1, NULL, filt_tctrlrdetach, filt_tctrlread };
1226
1227 int
1228 tctrlkqfilter(dev_t dev, struct knote *kn)
1229 {
1230 struct tctrl_softc *sc = device_lookup_private(&tctrl_cd,
1231 TCTRL_STD_DEV);
1232 struct klist *klist;
1233 int s;
1234
1235 switch (kn->kn_filter) {
1236 case EVFILT_READ:
1237 klist = &sc->sc_rsel.sel_klist;
1238 kn->kn_fop = &tctrlread_filtops;
1239 break;
1240
1241 default:
1242 return (1);
1243 }
1244
1245 kn->kn_hook = sc;
1246
1247 s = splts102();
1248 SLIST_INSERT_HEAD(klist, kn, kn_selnext);
1249 splx(s);
1250
1251 return (0);
1252 }
1253
1254 static void
1255 tctrl_sensor_setup(struct tctrl_softc *sc)
1256 {
1257 int i, error;
1258
1259 sc->sc_sme = sysmon_envsys_create();
1260
1261 /* case temperature */
1262 (void)strlcpy(sc->sc_sensor[0].desc, "Case temperature",
1263 sizeof(sc->sc_sensor[0].desc));
1264 sc->sc_sensor[0].units = ENVSYS_STEMP;
1265 sc->sc_sensor[0].state = ENVSYS_SINVALID;
1266
1267 /* battery voltage */
1268 (void)strlcpy(sc->sc_sensor[1].desc, "Internal battery voltage",
1269 sizeof(sc->sc_sensor[1].desc));
1270 sc->sc_sensor[1].units = ENVSYS_SVOLTS_DC;
1271 sc->sc_sensor[1].state = ENVSYS_SINVALID;
1272
1273 /* DC voltage */
1274 (void)strlcpy(sc->sc_sensor[2].desc, "DC-In voltage",
1275 sizeof(sc->sc_sensor[2].desc));
1276 sc->sc_sensor[2].units = ENVSYS_SVOLTS_DC;
1277 sc->sc_sensor[2].state = ENVSYS_SINVALID;
1278
1279 for (i = 0; i < ENVSYS_NUMSENSORS; i++) {
1280 if (sysmon_envsys_sensor_attach(sc->sc_sme,
1281 &sc->sc_sensor[i])) {
1282 sysmon_envsys_destroy(sc->sc_sme);
1283 return;
1284 }
1285 }
1286
1287 sc->sc_sme->sme_name = device_xname(sc->sc_dev);
1288 sc->sc_sme->sme_cookie = sc;
1289 sc->sc_sme->sme_refresh = tctrl_refresh;
1290
1291 if ((error = sysmon_envsys_register(sc->sc_sme)) != 0) {
1292 printf("%s: couldn't register sensors (%d)\n",
1293 device_xname(sc->sc_dev), error);
1294 sysmon_envsys_destroy(sc->sc_sme);
1295 return;
1296 }
1297
1298 /* now register the power button */
1299
1300 sysmon_task_queue_init();
1301
1302 sc->sc_powerpressed = 0;
1303 memset(&sc->sc_sm_pbutton, 0, sizeof(struct sysmon_pswitch));
1304 sc->sc_sm_pbutton.smpsw_name = device_xname(sc->sc_dev);
1305 sc->sc_sm_pbutton.smpsw_type = PSWITCH_TYPE_POWER;
1306 if (sysmon_pswitch_register(&sc->sc_sm_pbutton) != 0)
1307 printf("%s: unable to register power button with sysmon\n",
1308 device_xname(sc->sc_dev));
1309
1310 memset(&sc->sc_sm_lid, 0, sizeof(struct sysmon_pswitch));
1311 sc->sc_sm_lid.smpsw_name = device_xname(sc->sc_dev);
1312 sc->sc_sm_lid.smpsw_type = PSWITCH_TYPE_LID;
1313 if (sysmon_pswitch_register(&sc->sc_sm_lid) != 0)
1314 printf("%s: unable to register lid switch with sysmon\n",
1315 device_xname(sc->sc_dev));
1316
1317 memset(&sc->sc_sm_ac, 0, sizeof(struct sysmon_pswitch));
1318 sc->sc_sm_ac.smpsw_name = device_xname(sc->sc_dev);
1319 sc->sc_sm_ac.smpsw_type = PSWITCH_TYPE_ACADAPTER;
1320 if (sysmon_pswitch_register(&sc->sc_sm_ac) != 0)
1321 printf("%s: unable to register AC adaptor with sysmon\n",
1322 device_xname(sc->sc_dev));
1323 }
1324
1325 static void
1326 tctrl_power_button_pressed(void *arg)
1327 {
1328 struct tctrl_softc *sc = arg;
1329
1330 sysmon_pswitch_event(&sc->sc_sm_pbutton, PSWITCH_EVENT_PRESSED);
1331 sc->sc_powerpressed = 0;
1332 }
1333
1334 static void
1335 tctrl_lid_state(struct tctrl_softc *sc)
1336 {
1337 int state;
1338
1339 state = (sc->sc_ext_status & TS102_EXT_STATUS_LID_DOWN) ?
1340 PSWITCH_EVENT_PRESSED : PSWITCH_EVENT_RELEASED;
1341 sysmon_pswitch_event(&sc->sc_sm_lid, state);
1342 }
1343
1344 static void
1345 tctrl_ac_state(struct tctrl_softc *sc)
1346 {
1347 int state;
1348
1349 state = (sc->sc_ext_status & TS102_EXT_STATUS_MAIN_POWER_AVAILABLE) ?
1350 PSWITCH_EVENT_PRESSED : PSWITCH_EVENT_RELEASED;
1351 sysmon_pswitch_event(&sc->sc_sm_ac, state);
1352 }
1353
1354 static int
1355 tctrl_powerfail(void *arg)
1356 {
1357 struct tctrl_softc *sc = (struct tctrl_softc *)arg;
1358
1359 /*
1360 * We lost power. Queue a callback with thread context to
1361 * handle all the real work.
1362 */
1363 if (sc->sc_powerpressed == 0) {
1364 sc->sc_powerpressed = 1;
1365 sysmon_task_queue_sched(0, tctrl_power_button_pressed, sc);
1366 }
1367 return (1);
1368 }
1369
1370 static void
1371 tctrl_refresh(struct sysmon_envsys *sme, envsys_data_t *edata)
1372 {
1373 /*struct tctrl_softc *sc = sme->sme_cookie;*/
1374 struct tctrl_req req;
1375 int sleepable;
1376 int i;
1377
1378 i = edata->sensor;
1379 sleepable = curlwp ? 1 : 0;
1380
1381 switch (i)
1382 {
1383 case 0: /* case temperature */
1384 req.cmdbuf[0] = TS102_OP_RD_CURRENT_TEMP;
1385 req.cmdlen = 1;
1386 req.rsplen = 2;
1387 tadpole_request(&req, 0, sleepable);
1388 edata->value_cur = /* 273160? */
1389 (uint32_t)((int)((int)req.rspbuf[0] - 32) * 5000000
1390 / 9 + 273150000);
1391 req.cmdbuf[0] = TS102_OP_RD_MAX_TEMP;
1392 req.cmdlen = 1;
1393 req.rsplen = 2;
1394 tadpole_request(&req, 0, sleepable);
1395 edata->value_max =
1396 (uint32_t)((int)((int)req.rspbuf[0] - 32) * 5000000
1397 / 9 + 273150000);
1398 edata->flags |= ENVSYS_FVALID_MAX;
1399 req.cmdbuf[0] = TS102_OP_RD_MIN_TEMP;
1400 req.cmdlen = 1;
1401 req.rsplen = 2;
1402 tadpole_request(&req, 0, sleepable);
1403 edata->value_min =
1404 (uint32_t)((int)((int)req.rspbuf[0] - 32) * 5000000
1405 / 9 + 273150000);
1406 edata->flags |= ENVSYS_FVALID_MIN;
1407 edata->units = ENVSYS_STEMP;
1408 break;
1409
1410 case 1: /* battery voltage */
1411 {
1412 edata->units = ENVSYS_SVOLTS_DC;
1413 req.cmdbuf[0] = TS102_OP_RD_INT_BATT_VLT;
1414 req.cmdlen = 1;
1415 req.rsplen = 2;
1416 tadpole_request(&req, 0, sleepable);
1417 edata->value_cur = (int32_t)req.rspbuf[0] *
1418 1000000 / 11;
1419 }
1420 break;
1421 case 2: /* DC voltage */
1422 {
1423 edata->units = ENVSYS_SVOLTS_DC;
1424 req.cmdbuf[0] = TS102_OP_RD_DC_IN_VLT;
1425 req.cmdlen = 1;
1426 req.rsplen = 2;
1427 tadpole_request(&req, 0, sleepable);
1428 edata->value_cur = (int32_t)req.rspbuf[0] *
1429 1000000 / 11;
1430 }
1431 break;
1432 }
1433 edata->state = ENVSYS_SVALID;
1434 }
1435
1436 static void
1437 tctrl_event_thread(void *v)
1438 {
1439 struct tctrl_softc *sc = v;
1440 struct device *dv;
1441 struct sd_softc *sd = NULL;
1442 struct lance_softc *le = NULL;
1443 int ticks = hz/2;
1444 int rcount, wcount;
1445 int s;
1446
1447 while (sd == NULL) {
1448 dv = device_find_by_xname("sd0");
1449 if (dv != NULL)
1450 sd = device_private(dv);
1451 else
1452 tsleep(&sc->sc_events, PWAIT, "probe_disk", hz);
1453 }
1454 dv = device_find_by_xname("le0");
1455 if (dv != NULL)
1456 le = device_private(dv);
1457 printf("found %s\n", device_xname(sd->sc_dev));
1458 rcount = sd->sc_dk.dk_stats->io_rxfer;
1459 wcount = sd->sc_dk.dk_stats->io_wxfer;
1460
1461 tctrl_read_event_status(sc);
1462
1463 while (1) {
1464 tsleep(&sc->sc_events, PWAIT, "tctrl_event", ticks);
1465 s = splhigh();
1466 if ((rcount != sd->sc_dk.dk_stats->io_rxfer) ||
1467 (wcount != sd->sc_dk.dk_stats->io_wxfer)) {
1468 rcount = sd->sc_dk.dk_stats->io_rxfer;
1469 wcount = sd->sc_dk.dk_stats->io_wxfer;
1470 sc->sc_lcdwanted |= TS102_LCD_DISK_ACTIVE;
1471 } else
1472 sc->sc_lcdwanted &= ~TS102_LCD_DISK_ACTIVE;
1473 if (le != NULL) {
1474 if (le->sc_havecarrier != 0) {
1475 sc->sc_lcdwanted |= TS102_LCD_LAN_ACTIVE;
1476 } else
1477 sc->sc_lcdwanted &= ~TS102_LCD_LAN_ACTIVE;
1478 }
1479 splx(s);
1480 tctrl_update_lcd(sc);
1481 if (sc->sc_ext_pending)
1482 tctrl_read_event_status(sc);
1483 }
1484 }
1485
1486 void
1487 tadpole_register_callback(void (*callback)(void *, int), void *cookie)
1488 {
1489 struct tctrl_softc *sc;
1490
1491 sc = device_lookup_private(&tctrl_cd, TCTRL_STD_DEV);
1492 sc->sc_video_callback = callback;
1493 sc->sc_video_callback_cookie = cookie;
1494 if (sc->sc_video_callback != NULL) {
1495 sc->sc_video_callback(sc->sc_video_callback_cookie,
1496 sc->sc_extvga);
1497 }
1498 }
1499