GENERIC32 revision 1.52
1 # $NetBSD: GENERIC32,v 1.52 2002/10/18 01:54:15 grant Exp $ 2 3 include "arch/sparc64/conf/std.sparc64" 4 5 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 6 7 #ident "GENERIC-$Revision: 1.52 $" 8 9 maxusers 64 10 11 ## System kernel configuration. See options(4) for more detail. 12 13 14 # Options for variants of the Sun SPARC architecure. 15 # We currently support three architecture types; at least one is required. 16 options SUN4U # sun4u - UltraSPARC 17 #options BLINK # blink the system LED 18 19 ## System options specific to the sparc machine type 20 21 ## Use a faster console than the PROM's slow drawing routines. Not needed 22 ## for headless (no framebuffer) machines. 23 # XXX borken on sparc64 24 #options RASTERCONSOLE # fast rasterop console 25 #options FONT_GALLANT12x22 # the console font 26 #options FONT_BOLD8x16 # a somewhat smaller font 27 28 #### System options that are the same for all ports 29 30 ## Root device configuration: change the ?'s if you are going to use a 31 ## nonstandard root partition (other than where the kernel is booted from) 32 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 33 ## automagically determined at boot time. 34 35 config netbsd root on ? type ? 36 37 ## UVM options. 38 #options UVM_PAGE_TRKOWN 39 #options UVMHIST 40 #options UVMHIST_PRINT # Loud! 41 42 ## System call tracing (see ktrace(1)). 43 options KTRACE 44 options SYSTRACE # system call vetting via systrace(1) 45 46 ## Collect statistics on kernel malloc's and free's. This does have a 47 ## significant performance hit on slower machines, so it is intended for 48 ## diagnostic use only. 49 #options KMEMSTATS 50 51 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 52 options SYSVMSG # System V message queues 53 options SYSVSEM # System V semaphores 54 options SYSVSHM # System V shared memory 55 #options SHMMAXPGS=1024 # 1024 pages is the default 56 57 ## Loadable kernel module support; still under development. 58 options LKM 59 60 options USERCONF # userconf(4) support 61 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 62 63 ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 64 options NFS_BOOT_BOOTPARAM 65 #options NFS_BOOT_BOOTP 66 options NFS_BOOT_DHCP 67 68 #### Debugging options 69 70 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 71 ## serial console break or keyboard reset, where the PROM would normally 72 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 73 # we enable DDB in GENERIC for now. 74 options DDB # kernel dynamic debugger 75 options DDB_HISTORY_SIZE=100 # enable history editing in DDB 76 #options DDB_ONPANIC # see also sysctl(8): `ddb.onpanic' 77 78 ## You may also use gdb, on another computer connected to this machine over 79 ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 80 ## KGDB_DEV is a dev_t encoded device number of the serial port to use. 81 ## (0xc01 = ttya, 0xc02 = ttyb.) 82 #options KGDB # support for kernel gdb 83 #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 84 #options KGDB_DEVRATE=38400 # baud rate 85 86 87 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 88 ## such that gdb(1) can be used on a kernel coredump. 89 90 #makeoptions DEBUG="-g" 91 92 93 ## Adds code to the kernel that does internal consistency checks, and will 94 ## cause the kernel to panic if corruption of internal data structures 95 ## is detected. 96 #options DIAGNOSTIC # extra kernel sanity checking 97 98 ## Enable (possibly expensive) debugging code that may also display messages 99 ## on the system console 100 #options DEBUG 101 102 ## Make SCSI error messages more verbose when explaining their meanings. 103 options SCSIVERBOSE 104 options PCIVERBOSE 105 options MIIVERBOSE # verbose PHY autoconfig messages 106 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 107 108 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 109 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 110 ## and other insecurities good only for development work. Do not use this 111 ## option on a production machine. 112 #options INSECURE 113 114 ## Allow non-root users to grab /dev/console with programs such as xconsole. 115 ## `xconsole' therefore does not need setuid root with this option enabled. 116 #options UCONSOLE 117 118 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 119 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 120 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 121 ## opaque file mechanism. Perl calls this "secure setuid scripts." 122 123 #options FDSCRIPTS 124 #options SETUIDSCRIPTS 125 126 ## Options for compatibility with previous releases foreign system binaries. 127 ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 128 ## additional user-level utilities or system configuration files. See 129 ## compat_sunos(8) and compat_svr4(8). 130 131 options COMPAT_43 # 4.3BSD system interfaces 132 options COMPAT_09 # NetBSD 0.9 binary compatibility 133 options COMPAT_10 # NetBSD 1.0 binary compatibility 134 options COMPAT_11 # NetBSD 1.1 binary compatibility 135 options COMPAT_12 # NetBSD 1.2 binary compatibility 136 options COMPAT_13 # NetBSD 1.3 binary compatibility 137 options COMPAT_14 # NetBSD 1.4 binary compatibility 138 options COMPAT_SUNOS # SunOS 4.x binary compatibility 139 options COMPAT_SVR4 # SunOS 5.x binary compatibility 140 #options COMPAT_SVR4_32 # SunOS 5.x 32-bit binary compatibility -- 64-bit only 141 #options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility -- 64-bit only 142 options EXEC_AOUT # execve(2) support for a.out binaries 143 options EXEC_ELF32 # Exec module for SunOS 5.x binaries. 144 #options SYSCALL_DEBUG 145 146 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 147 148 ## File systems. You probably need at least one of FFS or NFS. 149 file-system FFS # Berkeley Fast Filesystem 150 file-system NFS # Sun NFS-compatible filesystem client 151 file-system KERNFS # kernel data-structure filesystem 152 file-system NULLFS # NULL layered filesystem 153 file-system OVERLAY # overlay file system 154 file-system MFS # memory-based filesystem 155 file-system FDESC # user file descriptor filesystem 156 file-system UMAPFS # uid/gid remapping filesystem 157 file-system LFS # Log-based filesystem (still experimental) 158 file-system PORTAL # portal filesystem (still experimental) 159 file-system PROCFS # /proc 160 file-system CD9660 # ISO 9660 + Rock Ridge file system 161 file-system UNION # union file system 162 file-system MSDOSFS # MS-DOS FAT filesystem(s). 163 164 ## File system options. 165 options NFSSERVER # Sun NFS-compatible filesystem server 166 options QUOTA # FFS quotas 167 #options FFS_EI # FFS Endian Independent support 168 options SOFTDEP # FFS soft updates support. 169 170 ## Network protocol support. In most environments, INET is required. 171 options INET # IP (Internet Protocol) v4 172 options INET6 # IPV6 173 #options IPSEC # IP security 174 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 175 #options IPSEC_DEBUG # debug for IP security 176 #options GATEWAY # packet forwarding ("router switch") 177 options MROUTING # packet forwarding of multicast packets 178 #options DIRECTED_BROADCAST # allow broadcasts through routers 179 options NS # Xerox NS networking 180 #options NSIP # Xerox NS tunneling over IP 181 options ISO,TPIP # OSI networking 182 options EON # OSI tunneling over IP 183 #options CCITT,LLC,HDLC # X.25 packet switched protocol 184 options NETATALK # AppleTalk (over Ethernet) protocol 185 options NTP # Network Time Protocol in-kernel support 186 #options PPS_SYNC # Add serial line synchronization for NTP 187 options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 188 options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 189 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 190 options PPP_BSDCOMP # Add BSD compression to ppp device 191 options PPP_DEFLATE # Add deflate (libz) compression to ppp device 192 options PPP_FILTER # Add active filters for ppp (via bpf) 193 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 194 195 196 #### Main bus and CPU .. all systems. 197 mainbus0 at root 198 cpu0 at mainbus0 199 200 #### Bus types found on SPARC systems. 201 202 sbus0 at mainbus0 # Ultra 1 203 #upa0 at mainbus0 # Ultra 1E, Ultra 2, Ex0000 204 psycho* at mainbus0 # Darwin, Ultra5 205 pci* at psycho? 206 pci* at ppb? 207 ppb* at pci? # `APB' support. 208 ebus* at pci? # ebus devices 209 # XXX 'puc's aren't really bridges, but there's no better place for them here 210 puc* at pci? dev ? function ? # PCI "universal" comm. cards 211 212 #### Standard system devices -- all required for a given architecture 213 214 ## PROM console driver -- if all else fails 215 pcons0 at mainbus0 # PROM console 216 217 ## Auxiliary system registers -- We use the OBP for power management 218 auxio* at ebus? # auxio registers 219 auxio* at sbus? slot ? offset ? # auxio registers 220 221 # We also need: 222 bpp* at sbus? slot ? offset ? # parallel port 223 lpt* at ebus? # parallel port 224 225 ## Mostek clock found on 4/300, sun4c, sun4m and sun4u systems. 226 ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 227 clock* at sbus? slot ? offset ? 228 clock* at ebus? 229 rtc* at ebus? 230 231 ## Timer chip found on 4/300, sun4c, sun4m and (some) sun4u systems. 232 timer* at mainbus0 # sun4c 233 234 #### Serial port configuration 235 236 ## Zilog 8530 serial chips. Each has two-channels. 237 ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 238 zs* at sbus? slot ? offset ? 239 zstty* at zs? channel ? # ttya 240 kbd0 at zstty? 241 ms0 at zstty? 242 243 ## PCI machines have serial ports: 244 ## Siemens SAB82532 controller: ttya and ttyb (`su'; sab) 245 ## Part of NS PC87332VLJ Super I/O controller: kbd/mouse (`se'; com) 246 247 ## The SAB82532 controller has two serial ports 248 sab* at ebus? # ttya/ttyb 249 sabtty* at sab? channel ? 250 251 ## Part of a PC87332VLJ 252 com* at ebus? # `com' driver for `su' 253 kbd0 at com? # keyboard 254 ms0 at com? # mouse 255 256 # PCI serial interfaces 257 com* at puc? port ? # 16x50s on "universal" comm boards 258 cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards 259 cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards 260 261 #### Disk controllers and disks 262 263 ## The following flags may be set for the NCR53c94 based esp driver: 264 ## bits 0-7: disable disconnect/reselect for the corresponding target 265 ## bits 8-15: disable synchronous negotiation for target [bit-8] 266 267 ## sun4u on-board SCSI, and FSBE/S SBus SCSI cards, an NCR53c94 or 268 ## equivalent behind an LSI Logic DMA controller 269 270 # XXX - the esp driver has problems with tagged queueing. 271 # To avoid these, tagged queueing has been disabled for the first 8 targets 272 # by setting those bits to 1 (starting at bit 16, see esp(4) for details). 273 # If you want tagged queueing, and are sure it works for you, set the flags 274 # value to 0. CAVEAT: using tagged queueing currently can cause data loss! 275 276 dma* at sbus? slot ? offset ? # SBus 277 esp* at dma? flags 0x00ff0000 # SBus 278 279 esp* at sbus? slot ? offset ? flags 0x00ff0000 280 isp* at sbus? slot ? offset ? 281 isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel 282 siop* at pci? # 53C875 "glm" compatible 283 284 # PCI SCSI controllers 285 # UT marks untested. 286 adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT 287 adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI UT 288 ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI UT 289 bha* at pci? dev ? function ? # BusLogic 9xx SCSI UT 290 dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID UT 291 iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI 292 pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI UT 293 trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI 294 295 scsibus* at scsi? 296 297 ## These entries find devices on all SCSI busses and assign 298 ## unit numbers dynamically. 299 sd* at scsibus? target ? lun ? # SCSI disks 300 st* at scsibus? target ? lun ? # SCSI tapes 301 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 302 ch* at scsibus? target ? lun ? # SCSI changer devices 303 ss* at scsibus? target ? lun ? # SCSI scanners 304 ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE devices 305 uk* at scsibus? target ? lun ? # unknown SCSI 306 307 # IDE and related devices 308 # PCI IDE controllers - see pciide(4) for supported hardware. 309 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 310 # how to set up DMA modes for this chip. This may work, or may cause 311 # a machine hang with some controllers. 312 pciide* at pci? dev ? function ? flags 0x0000 313 atapibus* at pciide? channel ? 314 315 # IDE drives 316 # Flags are used only with controllers that support DMA operations 317 # and mode settings (e.g. some pciide controllers) 318 # The lowest order four bits (rightmost digit) of the flags define the PIO 319 # mode to use, the next set of four bits the DMA mode and the third set the 320 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 321 # to use, and the last bit must be 1 for this setting to be used. 322 # For DMA and UDMA, 0xf (1111) means 'disable'. 323 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 324 # (0xc=1100, 0xa=1010, 0xf=1111) 325 # 0x0000 means "use whatever the drive claims to support". 326 327 ## Disable UDMA 4 which causes data corruption on the Acer Labs 328 ## chipset on Sun Blade 100 and Netra X1 machines. 329 wd* at pciide? channel ? drive ? flags 0x0a00 # Disable UDMA 4 330 331 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 332 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 333 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 334 335 # RAID controllers and devices (untested) 336 cac* at pci? dev ? function ? # Compaq PCI array controllers 337 mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family 338 twe* at pci? dev ? function ? # 3ware Escalade RAID controllers 339 340 ld* at cac? unit ? # logical disk devices 341 ld* at twe? unit ? 342 ld* at mlx? unit ? 343 344 ## Floppy controller and drive found on SPARCstations. 345 346 # need share with the sparc, and everyone else. needs to use auxio. 347 # actually, the ebus version has (will have) direct access to it's AUXIO 348 # register space (it is mapped in to fdthree not auxio). 349 #fdc0 at sbus? slot ? offset ? # SUNW,fdtwo 350 #fdc0 at ebus? # fdthree 351 #fd* at fdc0 # the drive itself 352 353 ## A disk-like interface to files. Can be used to create floppy, CD, 354 ## miniroot images, etc. 355 356 pseudo-device vnd 4 357 358 ## Concatenated and striped disks; with this, you can create a software-based 359 ## disk array similar to a "RAID 0" setup. See ccd(4). 360 361 pseudo-device ccd 4 362 363 ## Cryptographic disk devices. See cgd(4). 364 365 #pseudo-device cgd 4 366 367 ## RAIDframe disk driver: software RAID driver. See raid(4). 368 369 pseudo-device raid 8 370 options RAID_AUTOCONFIG # auto-configuration of RAID components 371 # Options to enable various other RAIDframe RAID types. 372 # options RF_INCLUDE_EVENODD=1 373 # options RF_INCLUDE_RAID5_RS=1 374 # options RF_INCLUDE_PARITYLOGGING=1 375 # options RF_INCLUDE_CHAINDECLUSTER=1 376 # options RF_INCLUDE_INTERDECLUSTER=1 377 # options RF_INCLUDE_PARITY_DECLUSTERING=1 378 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 379 380 381 ## Memory disk device, used on boot floppies with compressed 382 ## kernel-plus-root-disk images. 383 384 pseudo-device md 1 385 386 387 #### Network interfaces 388 389 ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 390 ## Three flavors of additional SBus ethernets are available. One attaches 391 ## directly like the sun4c on-board, one uses the ledma device like the 392 ## sun4m on-board, and one uses the lebuffer device. 393 394 ledma0 at sbus? slot ? offset ? # sun4m on-board 395 le0 at ledma0 # sun4m on-board 396 le* at sbus? slot ? offset ? # SBus 397 ledma* at sbus? slot ? offset ? # SBus 398 le* at ledma? # SBus 399 lebuffer0 at sbus? slot ? offset ? # SBus 400 le0 at lebuffer? # SBus 401 lebuffer* at sbus? slot ? offset ? # SBus 402 le* at lebuffer? # SBus 403 404 ## Happy Meal Ethernet 405 hme* at sbus? slot ? offset ? 406 hme* at pci? dev ? function ? # network "hme" compatible 407 408 ## qec/be, qec/hme 409 qec* at sbus? slot ? offset ? 410 be* at qec? 411 qe* at qec? 412 413 # PCI network interfaces 414 # UT marks untested. 415 an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11) UT 416 en* at pci? dev ? function ? # ENI/Adaptec ATM UT 417 # XXX causes ICE 418 #ep* at pci? dev ? function ? # 3Com 3c59x 419 ex* at pci? dev ? function ? # 3Com 90x[B] UT 420 epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet UT 421 esh* at pci? dev ? function ? # Essential HIPPI card UT 422 fpa* at pci? dev ? function ? # DEC DEFPA FDDI UT 423 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B UT 424 gem* at pci? dev ? function ? # Apple GMAC and Sun ERI gigabit enet 425 le* at pci? dev ? function ? # PCnet-PCI Ethernet UT 426 # XXX uses vtophys() 427 #lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3 428 ne* at pci? dev ? function ? # NE2000-compatible Ethernet UT 429 ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial UT 430 rtk* at pci? dev ? function ? # Realtek 8129/8139 UT 431 sip* at pci? dev ? function ? # SiS 900 Ethernet UT 432 ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet UT 433 tl* at pci? dev ? function ? # ThunderLAN-based Ethernet 434 tlp* at pci? dev ? function ? # DECchip 21x4x and clones 435 vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet 436 437 # MII/PHY support 438 # XXX: only nsphy "tested" 439 dmphy* at mii? phy ? # Davicom DM9101 PHYs 440 exphy* at mii? phy ? # 3Com internal PHYs 441 icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 442 inphy* at mii? phy ? # Intel 82555 PHYs 443 iophy* at mii? phy ? # Intel 82553 PHYs 444 lxtphy* at mii? phy ? # Level One LXT-970 PHYs 445 nsphy* at mii? phy ? # NS83840 PHYs 446 nsphyter* at mii? phy ? # NS83843 PHYs 447 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 448 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 449 tlphy* at mii? phy ? # ThunderLAN PHYs 450 tqphy* at mii? phy ? # TDK Semiconductor PHYs 451 ukphy* at mii? phy ? # generic unknown PHYs 452 453 # PCI USB controllers 454 ohci* at pci? dev ? function ? # Open Host Controller 455 456 usb* at ohci? # USB bus support 457 uhub* at usb? # USB Hubs 458 uhub* at uhub? port ? configuration ? interface ? 459 460 uhidev* at uhub? port ? configuration ? interface ? # USB HID 461 uhid* at uhidev? reportid ? # USB Generic HID 462 463 ulpt* at uhub? port ? configuration ? interface ? # USB Printer 464 465 umodem* at uhub? port ? configuration ? # USB Modem 466 ucom* at umodem? 467 468 umass* at uhub? port ? configuration ? interface ? # USB Mass Storage 469 atapibus* at umass? channel ? 470 scsibus* at umass? channel ? 471 472 uaudio* at uhub? port ? configuration ? # USB audio 473 474 # USB Ethernet adapters 475 aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters 476 cue* at uhub? port ? # CATC USB-EL1201A based adapters 477 kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters 478 479 uscanner* at uhub? port ? # USB scanners 480 uyap* at uhub? port ? # Y@P firmware loader 481 ugen* at uhub? port ? configuration ? interface ? # USB Generic driver 482 483 # PCI IEEE1394 controllers 484 fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller 485 #fwlynx* at pci? dev ? function ? # IEEE1394 TI Lynx Controller 486 fw* at fwbus? # IP over 1394 487 488 # IEEE1394 nodes 489 #fwnode* at fwbus? oui ? devhi ? devlo ? 490 #scsibus* at fwnode? 491 492 ## Loopback network interface; required 493 pseudo-device loop 494 495 ## SLIP and CSLIP interfaces, for IP over a serial line. 496 pseudo-device sl 2 497 498 ## PPP, the successor to SLIP. See pppd(8). 499 pseudo-device ppp 2 500 501 ## PPP over Ethernet (RFC 2516) 502 pseudo-device pppoe 503 504 ## Starmode Radio IP, a special hardware network device. 505 pseudo-device strip 1 506 507 ## Network "tunnel" device, allowing protocol stacks to run in the userland. 508 ## This is used by the third-party user-mode "ppp" program, and others. 509 pseudo-device tun 4 510 511 ## Generic L3 over IP tunnel 512 #pseudo-device gre 2 # generic L3 over IP tunnel 513 514 ## Berkeley Packet Filter, required to run RARPD. A generic C-language 515 ## interface that allows selective examining of incoming packets. 516 pseudo-device bpfilter 8 517 518 ## Simple inter-network traffic bridging 519 pseudo-device bridge 520 521 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 522 ## one example of the use of the IP Filter. 523 pseudo-device ipfilter 524 525 ## for IPv6 526 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 527 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 528 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 529 530 531 #### Audio and video devices 532 533 ## /dev/audio support (`audiocs' plus `audio') 534 ## 535 audiocs* at sbus? slot ? offset ? # SUNW,CS4231 536 audiocs* at ebus? # SUNW,CS4231 in U5/U10 537 autri* at pci? dev ? function ? # Blade 100 'sound' 538 539 audio* at audiocs? 540 audio* at autri? 541 audio* at uaudio? 542 543 #midi* at autri? 544 545 546 ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 547 ## systems. If your sun4 system has a cgfour installed in the P4 slot, 548 ## the P4 entries for "bwtwo" will attach to the overlay plane of the 549 ## "cgfour". 550 551 #bwtwo0 at sbus? slot ? offset ? # sun4c and sun4m 552 #bwtwo* at sbus? slot ? offset ? 553 554 ## Sun "cgthree" Sbus color framebuffer 555 #cgthree0 at sbus? slot ? offset ? 556 #cgthree* at sbus? slot ? offset ? 557 558 ## Sun "cgsix" accelerated color framebuffer. 559 cgsix0 at sbus? slot ? offset ? 560 cgsix* at sbus? slot ? offset ? 561 562 ## Sun FFB not supported 563 #ffb* at upa? 564 565 #### Other device configuration 566 567 ## Pseudo ttys, required for network logins and programs like screen. 568 569 pseudo-device pty # pseudo-ttys (for network, etc.) 570 571 ## Random device, used to implement /dev/random (a source of random noise), 572 ## and generate randomness for some kernel formulae. 573 574 pseudo-device rnd 575 576 pseudo-device clockctl # user control of clock subsystem 577
Indexes created Tue Oct 14 08:09:56 GMT 2025