GENERIC32 revision 1.57
1 # $NetBSD: GENERIC32,v 1.57 2003/02/16 17:35:17 augustss Exp $ 2 3 include "arch/sparc64/conf/std.sparc64" 4 5 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 6 7 #ident "GENERIC-$Revision: 1.57 $" 8 9 maxusers 64 10 11 ## System kernel configuration. See options(4) for more detail. 12 13 14 # Options for variants of the Sun SPARC architecure. 15 # We currently support three architecture types; at least one is required. 16 options SUN4U # sun4u - UltraSPARC 17 #options BLINK # blink the system LED 18 19 ## System options specific to the sparc machine type 20 21 ## Use a faster console than the PROM's slow drawing routines. Not needed 22 ## for headless (no framebuffer) machines. 23 # XXX borken on sparc64 24 #options RASTERCONSOLE # fast rasterop console 25 #options FONT_GALLANT12x22 # the console font 26 #options FONT_BOLD8x16 # a somewhat smaller font 27 28 #### System options that are the same for all ports 29 30 ## Root device configuration: change the ?'s if you are going to use a 31 ## nonstandard root partition (other than where the kernel is booted from) 32 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 33 ## automagically determined at boot time. 34 35 config netbsd root on ? type ? 36 37 ## UVM options. 38 #options UVM_PAGE_TRKOWN 39 #options UVMHIST 40 #options UVMHIST_PRINT # Loud! 41 42 ## System call tracing (see ktrace(1)). 43 options KTRACE 44 options SYSTRACE # system call vetting via systrace(1) 45 46 ## Collect statistics on kernel malloc's and free's. This does have a 47 ## significant performance hit on slower machines, so it is intended for 48 ## diagnostic use only. 49 #options KMEMSTATS 50 51 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 52 options SYSVMSG # System V message queues 53 options SYSVSEM # System V semaphores 54 options SYSVSHM # System V shared memory 55 #options SHMMAXPGS=1024 # 1024 pages is the default 56 57 ## Loadable kernel module support; still under development. 58 options LKM 59 60 options USERCONF # userconf(4) support 61 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 62 63 # Enable experimental buffer queue strategy for better responsiveness under 64 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 65 #options NEW_BUFQ_STRATEGY 66 67 ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 68 options NFS_BOOT_BOOTPARAM 69 #options NFS_BOOT_BOOTP 70 options NFS_BOOT_DHCP 71 72 #### Debugging options 73 74 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 75 ## serial console break or keyboard reset, where the PROM would normally 76 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 77 # we enable DDB in GENERIC for now. 78 options DDB # kernel dynamic debugger 79 options DDB_HISTORY_SIZE=100 # enable history editing in DDB 80 #options DDB_ONPANIC # see also sysctl(8): `ddb.onpanic' 81 82 ## You may also use gdb, on another computer connected to this machine over 83 ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 84 ## KGDB_DEV is a dev_t encoded device number of the serial port to use. 85 ## (0xc01 = ttya, 0xc02 = ttyb.) 86 #options KGDB # support for kernel gdb 87 #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 88 #options KGDB_DEVRATE=38400 # baud rate 89 90 91 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 92 ## such that gdb(1) can be used on a kernel coredump. 93 94 #makeoptions DEBUG="-g" 95 96 97 ## Adds code to the kernel that does internal consistency checks, and will 98 ## cause the kernel to panic if corruption of internal data structures 99 ## is detected. 100 #options DIAGNOSTIC # extra kernel sanity checking 101 102 ## Enable (possibly expensive) debugging code that may also display messages 103 ## on the system console 104 #options DEBUG 105 106 ## Make SCSI error messages more verbose when explaining their meanings. 107 options SCSIVERBOSE 108 options PCIVERBOSE 109 options MIIVERBOSE # verbose PHY autoconfig messages 110 #options PCI_CONFIG_DUMP # verbosely dump PCI config space 111 112 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 113 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 114 ## and other insecurities good only for development work. Do not use this 115 ## option on a production machine. 116 #options INSECURE 117 118 ## Allow non-root users to grab /dev/console with programs such as xconsole. 119 ## `xconsole' therefore does not need setuid root with this option enabled. 120 #options UCONSOLE 121 122 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 123 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 124 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 125 ## opaque file mechanism. Perl calls this "secure setuid scripts." 126 127 #options FDSCRIPTS 128 #options SETUIDSCRIPTS 129 130 ## Options for compatibility with previous releases foreign system binaries. 131 ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 132 ## additional user-level utilities or system configuration files. See 133 ## compat_sunos(8) and compat_svr4(8). 134 135 options COMPAT_43 # 4.3BSD system interfaces 136 options COMPAT_09 # NetBSD 0.9 binary compatibility 137 options COMPAT_10 # NetBSD 1.0 binary compatibility 138 options COMPAT_11 # NetBSD 1.1 binary compatibility 139 options COMPAT_12 # NetBSD 1.2 binary compatibility 140 options COMPAT_13 # NetBSD 1.3 binary compatibility 141 options COMPAT_14 # NetBSD 1.4 binary compatibility 142 options COMPAT_SUNOS # SunOS 4.x binary compatibility 143 options COMPAT_SVR4 # SunOS 5.x binary compatibility 144 #options COMPAT_SVR4_32 # SunOS 5.x 32-bit binary compatibility -- 64-bit only 145 #options COMPAT_NETBSD32 # NetBSD/sparc binary compatibility -- 64-bit only 146 options EXEC_AOUT # execve(2) support for a.out binaries 147 options EXEC_ELF32 # Exec module for SunOS 5.x binaries. 148 #options SYSCALL_DEBUG 149 150 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 151 152 ## File systems. You probably need at least one of FFS or NFS. 153 file-system FFS # Berkeley Fast Filesystem 154 file-system NFS # Sun NFS-compatible filesystem client 155 file-system KERNFS # kernel data-structure filesystem 156 file-system NULLFS # NULL layered filesystem 157 file-system OVERLAY # overlay file system 158 file-system MFS # memory-based filesystem 159 file-system FDESC # user file descriptor filesystem 160 file-system UMAPFS # uid/gid remapping filesystem 161 file-system LFS # Log-based filesystem (still experimental) 162 file-system PORTAL # portal filesystem (still experimental) 163 file-system PROCFS # /proc 164 file-system CD9660 # ISO 9660 + Rock Ridge file system 165 file-system UNION # union file system 166 file-system MSDOSFS # MS-DOS FAT filesystem(s). 167 168 ## File system options. 169 options NFSSERVER # Sun NFS-compatible filesystem server 170 options QUOTA # FFS quotas 171 #options FFS_EI # FFS Endian Independent support 172 options SOFTDEP # FFS soft updates support. 173 174 ## Network protocol support. In most environments, INET is required. 175 options INET # IP (Internet Protocol) v4 176 options INET6 # IPV6 177 #options IPSEC # IP security 178 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 179 #options IPSEC_DEBUG # debug for IP security 180 #options GATEWAY # packet forwarding ("router switch") 181 options MROUTING # packet forwarding of multicast packets 182 #options DIRECTED_BROADCAST # allow broadcasts through routers 183 options NS # Xerox NS networking 184 #options NSIP # Xerox NS tunneling over IP 185 options ISO,TPIP # OSI networking 186 options EON # OSI tunneling over IP 187 #options CCITT,LLC,HDLC # X.25 packet switched protocol 188 options NETATALK # AppleTalk (over Ethernet) protocol 189 options NTP # Network Time Protocol in-kernel support 190 #options PPS_SYNC # Add serial line synchronization for NTP 191 options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 192 options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 193 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 194 options PPP_BSDCOMP # Add BSD compression to ppp device 195 options PPP_DEFLATE # Add deflate (libz) compression to ppp device 196 options PPP_FILTER # Add active filters for ppp (via bpf) 197 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 198 199 200 #### Main bus and CPU .. all systems. 201 mainbus0 at root 202 cpu0 at mainbus0 203 204 #### Bus types found on SPARC systems. 205 206 sbus0 at mainbus0 # Ultra 1 207 #upa0 at mainbus0 # Ultra 1E, Ultra 2, Ex0000 208 psycho* at mainbus0 # Darwin, Ultra5 209 pci* at psycho? 210 pci* at ppb? 211 ppb* at pci? # `APB' support. 212 ebus* at pci? # ebus devices 213 # XXX 'puc's aren't really bridges, but there's no better place for them here 214 puc* at pci? dev ? function ? # PCI "universal" comm. cards 215 216 #### Standard system devices -- all required for a given architecture 217 218 ## PROM console driver -- if all else fails 219 pcons0 at mainbus0 # PROM console 220 221 ## Auxiliary system registers -- We use the OBP for power management 222 auxio* at ebus? # auxio registers 223 auxio* at sbus? slot ? offset ? # auxio registers 224 225 # We also need: 226 bpp* at sbus? slot ? offset ? # parallel port 227 lpt* at ebus? # parallel port 228 229 ## Mostek clock found on 4/300, sun4c, sun4m and sun4u systems. 230 ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 231 clock* at sbus? slot ? offset ? 232 clock* at ebus? 233 rtc* at ebus? 234 235 ## Timer chip found on 4/300, sun4c, sun4m and (some) sun4u systems. 236 timer* at mainbus0 # sun4c 237 238 #### Serial port configuration 239 240 ## Zilog 8530 serial chips. Each has two-channels. 241 ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 242 zs* at sbus? slot ? offset ? 243 zstty* at zs? channel ? # ttya 244 kbd0 at zstty? 245 ms0 at zstty? 246 247 ## PCI machines have serial ports: 248 ## Siemens SAB82532 controller: ttya and ttyb (`su'; sab) 249 ## Part of NS PC87332VLJ Super I/O controller: kbd/mouse (`se'; com) 250 251 ## The SAB82532 controller has two serial ports 252 sab* at ebus? # ttya/ttyb 253 sabtty* at sab? channel ? 254 255 ## Part of a PC87332VLJ 256 com* at ebus? # `com' driver for `su' 257 kbd0 at com? # keyboard 258 ms0 at com? # mouse 259 260 # PCI serial interfaces 261 com* at puc? port ? # 16x50s on "universal" comm boards 262 cy* at pci? dev ? function ? # Cyclades Cyclom-Y serial boards 263 cz* at pci? dev ? function ? # Cyclades-Z multi-port serial boards 264 265 #### Disk controllers and disks 266 267 ## The following flags may be set for the NCR53c94 based esp driver: 268 ## bits 0-7: disable disconnect/reselect for the corresponding target 269 ## bits 8-15: disable synchronous negotiation for target [bit-8] 270 271 ## sun4u on-board SCSI, and FSBE/S SBus SCSI cards, an NCR53c94 or 272 ## equivalent behind an LSI Logic DMA controller 273 274 # XXX - the esp driver has problems with tagged queueing. 275 # To avoid these, tagged queueing has been disabled for the first 8 targets 276 # by setting those bits to 1 (starting at bit 16, see esp(4) for details). 277 # If you want tagged queueing, and are sure it works for you, set the flags 278 # value to 0. CAVEAT: using tagged queueing currently can cause data loss! 279 280 dma* at sbus? slot ? offset ? # SBus 281 esp* at dma? flags 0x00ff0000 # SBus 282 283 esp* at sbus? slot ? offset ? flags 0x00ff0000 284 isp* at sbus? slot ? offset ? 285 isp* at pci? dev ? function ? # Qlogic ISP [12]0x0 SCSI/FibreChannel 286 siop* at pci? # 53C875 "glm" compatible 287 288 # PCI SCSI controllers 289 # UT marks untested. 290 adv* at pci? dev ? function ? # AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT 291 adw* at pci? dev ? function ? # AdvanSys 9x0UW[D], 3940U[2,3]W SCSI UT 292 ahc* at pci? dev ? function ? # Adaptec [23]94x, aic78x0 SCSI UT 293 bha* at pci? dev ? function ? # BusLogic 9xx SCSI UT 294 dpt* at pci? dev ? function ? # DPT SmartCache/SmartRAID UT 295 iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI 296 pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI UT 297 trm* at pci? dev ? function ? # Tekram DC-395U/UW/F, DC-315/U SCSI 298 299 scsibus* at scsi? 300 301 ## These entries find devices on all SCSI busses and assign 302 ## unit numbers dynamically. 303 sd* at scsibus? target ? lun ? # SCSI disks 304 st* at scsibus? target ? lun ? # SCSI tapes 305 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 306 ch* at scsibus? target ? lun ? # SCSI changer devices 307 ss* at scsibus? target ? lun ? # SCSI scanners 308 ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE devices 309 uk* at scsibus? target ? lun ? # unknown SCSI 310 311 # IDE and related devices 312 # PCI IDE controllers - see pciide(4) for supported hardware. 313 # The 0x0001 flag force the driver to use DMA, even if the driver doesn't know 314 # how to set up DMA modes for this chip. This may work, or may cause 315 # a machine hang with some controllers. 316 pciide* at pci? dev ? function ? flags 0x0000 317 atapibus* at pciide? channel ? 318 319 # IDE drives 320 # Flags are used only with controllers that support DMA operations 321 # and mode settings (e.g. some pciide controllers) 322 # The lowest order four bits (rightmost digit) of the flags define the PIO 323 # mode to use, the next set of four bits the DMA mode and the third set the 324 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 325 # to use, and the last bit must be 1 for this setting to be used. 326 # For DMA and UDMA, 0xf (1111) means 'disable'. 327 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 328 # (0xc=1100, 0xa=1010, 0xf=1111) 329 # 0x0000 means "use whatever the drive claims to support". 330 331 ## Disable UDMA 4 which causes data corruption on the Acer Labs 332 ## chipset on Sun Blade 100 and Netra X1 machines. 333 wd* at pciide? channel ? drive ? flags 0x0a00 # Disable UDMA 4 334 335 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 336 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 337 uk* at atapibus? drive ? flags 0x0000 # ATAPI unknown 338 339 # RAID controllers and devices (untested) 340 cac* at pci? dev ? function ? # Compaq PCI array controllers 341 mlx* at pci? dev ? function ? # Mylex DAC960 & DEC SWXCR family 342 twe* at pci? dev ? function ? # 3ware Escalade RAID controllers 343 344 ld* at cac? unit ? # logical disk devices 345 ld* at twe? unit ? 346 ld* at mlx? unit ? 347 348 ## Floppy controller and drive found on SPARCstations. 349 350 # need share with the sparc, and everyone else. needs to use auxio. 351 # actually, the ebus version has (will have) direct access to it's AUXIO 352 # register space (it is mapped in to fdthree not auxio). 353 #fdc0 at sbus? slot ? offset ? # SUNW,fdtwo 354 #fdc0 at ebus? # fdthree 355 #fd* at fdc0 # the drive itself 356 357 ## A disk-like interface to files. Can be used to create floppy, CD, 358 ## miniroot images, etc. 359 360 pseudo-device vnd 4 361 362 ## Concatenated and striped disks; with this, you can create a software-based 363 ## disk array similar to a "RAID 0" setup. See ccd(4). 364 365 pseudo-device ccd 4 366 367 ## Cryptographic disk devices. See cgd(4). 368 369 #pseudo-device cgd 4 370 371 ## RAIDframe disk driver: software RAID driver. See raid(4). 372 373 pseudo-device raid 8 374 options RAID_AUTOCONFIG # auto-configuration of RAID components 375 # Options to enable various other RAIDframe RAID types. 376 # options RF_INCLUDE_EVENODD=1 377 # options RF_INCLUDE_RAID5_RS=1 378 # options RF_INCLUDE_PARITYLOGGING=1 379 # options RF_INCLUDE_CHAINDECLUSTER=1 380 # options RF_INCLUDE_INTERDECLUSTER=1 381 # options RF_INCLUDE_PARITY_DECLUSTERING=1 382 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 383 384 385 ## Memory disk device, used on boot floppies with compressed 386 ## kernel-plus-root-disk images. 387 388 pseudo-device md 1 389 390 391 #### Network interfaces 392 393 ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 394 ## Three flavors of additional SBus ethernets are available. One attaches 395 ## directly like the sun4c on-board, one uses the ledma device like the 396 ## sun4m on-board, and one uses the lebuffer device. 397 398 ledma0 at sbus? slot ? offset ? # sun4m on-board 399 le0 at ledma0 # sun4m on-board 400 le* at sbus? slot ? offset ? # SBus 401 ledma* at sbus? slot ? offset ? # SBus 402 le* at ledma? # SBus 403 lebuffer0 at sbus? slot ? offset ? # SBus 404 le0 at lebuffer? # SBus 405 lebuffer* at sbus? slot ? offset ? # SBus 406 le* at lebuffer? # SBus 407 408 ## Happy Meal Ethernet 409 hme* at sbus? slot ? offset ? 410 hme* at pci? dev ? function ? # network "hme" compatible 411 412 ## qec/be, qec/hme 413 qec* at sbus? slot ? offset ? 414 be* at qec? 415 qe* at qec? 416 417 # PCI network interfaces 418 # UT marks untested. 419 an* at pci? dev ? function ? # Aironet PC4500/PC4800 (802.11) UT 420 en* at pci? dev ? function ? # ENI/Adaptec ATM UT 421 # XXX causes ICE 422 #ep* at pci? dev ? function ? # 3Com 3c59x 423 ex* at pci? dev ? function ? # 3Com 90x[B] UT 424 epic* at pci? dev ? function ? # SMC EPIC/100 Ethernet UT 425 esh* at pci? dev ? function ? # Essential HIPPI card UT 426 fpa* at pci? dev ? function ? # DEC DEFPA FDDI UT 427 fxp* at pci? dev ? function ? # Intel EtherExpress PRO 10+/100B 428 gem* at pci? dev ? function ? # Apple GMAC and Sun ERI gigabit enet 429 le* at pci? dev ? function ? # PCnet-PCI Ethernet UT 430 # XXX uses vtophys() 431 #lmc* at pci? dev ? function ? # Lan Media Corp SSI/HSSI/DS3 432 ne* at pci? dev ? function ? # NE2000-compatible Ethernet UT 433 ntwoc* at pci? dev ? function ? # Riscom/N2 PCI Sync Serial UT 434 rtk* at pci? dev ? function ? # Realtek 8129/8139 435 sip* at pci? dev ? function ? # SiS 900 Ethernet UT 436 ti* at pci? dev ? function ? # Alteon ACEnic gigabit Ethernet UT 437 tl* at pci? dev ? function ? # ThunderLAN-based Ethernet 438 tlp* at pci? dev ? function ? # DECchip 21x4x and clones 439 vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet 440 wi* at pci? dev ? function ? # Lucent/Intersil WaveLAN/IEEE 441 442 # MII/PHY support 443 # XXX: only nsphy "tested" 444 dmphy* at mii? phy ? # Davicom DM9101 PHYs 445 exphy* at mii? phy ? # 3Com internal PHYs 446 icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 447 inphy* at mii? phy ? # Intel 82555 PHYs 448 iophy* at mii? phy ? # Intel 82553 PHYs 449 lxtphy* at mii? phy ? # Level One LXT-970 PHYs 450 nsphy* at mii? phy ? # NS83840 PHYs 451 nsphyter* at mii? phy ? # NS83843 PHYs 452 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 453 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 454 tlphy* at mii? phy ? # ThunderLAN PHYs 455 tqphy* at mii? phy ? # TDK Semiconductor PHYs 456 ukphy* at mii? phy ? # generic unknown PHYs 457 458 # PCI USB controllers 459 ohci* at pci? dev ? function ? # Open Host Controller 460 461 usb* at ohci? # USB bus support 462 uhub* at usb? # USB Hubs 463 uhub* at uhub? port ? configuration ? interface ? 464 465 uhidev* at uhub? port ? configuration ? interface ? # USB HID 466 uhid* at uhidev? reportid ? # USB Generic HID 467 468 ulpt* at uhub? port ? configuration ? interface ? # USB Printer 469 470 umodem* at uhub? port ? configuration ? # USB Modem 471 ucom* at umodem? 472 473 umass* at uhub? port ? configuration ? interface ? # USB Mass Storage 474 atapibus* at umass? channel ? 475 scsibus* at umass? channel ? 476 477 uaudio* at uhub? port ? configuration ? # USB audio 478 479 # USB Ethernet adapters 480 aue* at uhub? port ? # ADMtek AN986 Pegasus based adapters 481 cue* at uhub? port ? # CATC USB-EL1201A based adapters 482 kue* at uhub? port ? # Kawasaki LSI KL5KUSB101B based adapters 483 uax* at uhub? port ? # ASIX AX88172 based adapters 484 url* at uhub? port ? # Realtek RTL8150L based adapters 485 486 uscanner* at uhub? port ? # USB scanners 487 uyap* at uhub? port ? # Y@P firmware loader 488 ugen* at uhub? port ? configuration ? interface ? # USB Generic driver 489 490 # PCI IEEE1394 controllers 491 fwohci* at pci? dev ? function ? # IEEE1394 Open Host Controller 492 #fwlynx* at pci? dev ? function ? # IEEE1394 TI Lynx Controller 493 fw* at fwbus? # IP over 1394 494 495 # IEEE1394 nodes 496 #fwnode*at fwbus? oui ? devhi ? devlo ? 497 #scsibus* at fwnode? 498 499 ## Loopback network interface; required 500 pseudo-device loop 501 502 ## SLIP and CSLIP interfaces, for IP over a serial line. 503 pseudo-device sl 2 504 505 ## PPP, the successor to SLIP. See pppd(8). 506 pseudo-device ppp 2 507 508 ## PPP over Ethernet (RFC 2516) 509 pseudo-device pppoe 510 511 ## Starmode Radio IP, a special hardware network device. 512 pseudo-device strip 1 513 514 ## Network "tunnel" device, allowing protocol stacks to run in the userland. 515 ## This is used by the third-party user-mode "ppp" program, and others. 516 pseudo-device tun 4 517 518 ## Generic L3 over IP tunnel 519 #pseudo-device gre 2 # generic L3 over IP tunnel 520 521 ## Berkeley Packet Filter, required to run RARPD. A generic C-language 522 ## interface that allows selective examining of incoming packets. 523 pseudo-device bpfilter 8 524 525 ## Simple inter-network traffic bridging 526 pseudo-device bridge 527 528 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 529 ## one example of the use of the IP Filter. 530 pseudo-device ipfilter 531 532 ## for IPv6 533 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 534 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 535 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 536 537 538 #### Audio and video devices 539 540 ## /dev/audio support (`audiocs' plus `audio') 541 ## 542 audiocs* at sbus? slot ? offset ? # SUNW,CS4231 543 audiocs* at ebus? # SUNW,CS4231 in U5/U10 544 autri* at pci? dev ? function ? # Blade 100 'sound' 545 546 audio* at audiocs? 547 audio* at autri? 548 audio* at uaudio? 549 550 #midi* at autri? 551 552 553 ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 554 ## systems. If your sun4 system has a cgfour installed in the P4 slot, 555 ## the P4 entries for "bwtwo" will attach to the overlay plane of the 556 ## "cgfour". 557 558 #bwtwo0 at sbus? slot ? offset ? # sun4c and sun4m 559 #bwtwo* at sbus? slot ? offset ? 560 561 ## Sun "cgthree" Sbus color framebuffer 562 #cgthree0 at sbus? slot ? offset ? 563 #cgthree* at sbus? slot ? offset ? 564 565 ## Sun "cgsix" accelerated color framebuffer. 566 cgsix0 at sbus? slot ? offset ? 567 cgsix* at sbus? slot ? offset ? 568 569 ## Sun FFB not supported 570 #ffb* at upa? 571 572 #### Other device configuration 573 574 ## Pseudo ttys, required for network logins and programs like screen. 575 576 pseudo-device pty # pseudo-ttys (for network, etc.) 577 578 ## Random device, used to implement /dev/random (a source of random noise), 579 ## and generate randomness for some kernel formulae. 580 581 pseudo-device rnd 582 583 pseudo-device clockctl # user control of clock subsystem 584
Indexes created Mon Oct 13 21:09:55 GMT 2025