GENERIC32 revision 1.86
1# 	$NetBSD: GENERIC32,v 1.86 2004/08/01 10:51:33 mrg Exp $
2
3include "arch/sparc64/conf/std.sparc64"
4
5options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
6
7#ident 		"GENERIC-$Revision: 1.86 $"
8
9maxusers	64
10
11## System kernel configuration.  See options(4) for more detail.
12
13
14# Options for variants of the Sun SPARC architecure.
15# We currently support three architecture types; at least one is required.
16options 	SUN4U		# sun4u - UltraSPARC
17#options 	BLINK		# blink the system LED
18
19## System options specific to the sparc machine type
20
21## Use a faster console than the PROM's slow drawing routines.  Not needed
22## for headless (no framebuffer) machines.
23# XXX borken on sparc64
24#options 	RASTERCONSOLE		# fast rasterop console
25#options 	FONT_GALLANT12x22	# the console font
26#options 	FONT_BOLD8x16		# a somewhat smaller font
27
28#### System options that are the same for all ports
29
30## Root device configuration: change the ?'s if you are going to use a
31## nonstandard root partition (other than where the kernel is booted from)
32## and/or nonstandard root type (not ffs or nfs).  Normally this can be
33## automagically determined at boot time.
34
35config		netbsd	root on ? type ?
36
37## UVM options.
38#options 	UVM_PAGE_TRKOWN
39#options 	UVMHIST
40#options 	UVMHIST_PRINT	# Loud!
41
42## System call tracing (see ktrace(1)).
43options 	KTRACE
44options 	SYSTRACE		# system call vetting via systrace(1)
45
46## Collect statistics on kernel malloc's and free's.  This does have a
47## significant performance hit on slower machines, so it is intended for
48## diagnostic use only.
49#options 	KMEMSTATS
50
51## System V compatible IPC subsystem.  (msgctl(2), semctl(2), and shmctl(2))
52options 	SYSVMSG		# System V message queues
53options 	SYSVSEM		# System V semaphores
54options 	SYSVSHM		# System V shared memory
55#options 	SHMMAXPGS=1024	# 1024 pages is the default
56options 	P1003_1B_SEMAPHORE	# p1003.1b semaphore support 
57
58
59## Loadable kernel module support; still under development.
60options 	LKM
61
62options 	USERCONF	# userconf(4) support
63#options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
64options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
65
66# Enable experimental buffer queue strategy for better responsiveness under 
67# high disk I/O load. Use it with caution - it's not proven to be stable yet.
68#options 	NEW_BUFQ_STRATEGY
69
70## NFS boot options; tries DHCP/BOOTP then BOOTPARAM
71options 	NFS_BOOT_BOOTPARAM
72#options 	NFS_BOOT_BOOTP
73options 	NFS_BOOT_DHCP
74
75#### Debugging options
76
77## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at
78## serial console break or keyboard reset, where the PROM would normally
79## intercept.  DDB_HISTORY_SIZE adds up/down arrow command history.
80# we enable DDB in GENERIC for now.
81options 	DDB			# kernel dynamic debugger
82options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
83#options 	DDB_ONPANIC		# see also sysctl(8): `ddb.onpanic'
84
85## You may also use gdb, on another computer connected to this machine over
86## a serial port.
87# ttyb on an Ultra5 is aliased to: "/pci@1f,0/pci@1,1/ebus@1/se:b", which is
88# "/pci@1f,0/pci@1,1/ebus@1/se@14,400000", port b.
89# options 	KGDB			# support for kernel gdb
90# options 	KGDB_DEVNAME="\"sab\""	# driver name for the kgdb serial chip
91# options 	KGDB_DEVADDR=0x400000	# physical address of the chip
92# options 	KGDB_DEVPORT=1		# port b
93# options 	KGDB_DEVRATE=38400	# baud rate
94
95
96## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file),
97## such that gdb(1) can be used on a kernel coredump.
98
99#makeoptions	DEBUG="-g"
100
101
102## Adds code to the kernel that does internal consistency checks, and will
103## cause the kernel to panic if corruption of internal data structures
104## is detected.
105#options 	DIAGNOSTIC	# extra kernel sanity checking
106
107## Enable (possibly expensive) debugging code that may also display messages
108## on the system console
109#options 	DEBUG
110
111## Make SCSI error messages more verbose when explaining their meanings.
112options 	SCSIVERBOSE
113options 	PCIVERBOSE
114options 	MIIVERBOSE	# verbose PHY autoconfig messages
115#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
116
117## `INSECURE' turns off the kernel security level (securelevel = 0 always).
118## This allows writing to /dev/mem, loading kernel modules while multi-user,
119## and other insecurities good only for development work.  Do not use this
120## option on a production machine.
121#options 	INSECURE
122
123## `FDSCRIPTS' allows non-readable but executable scripts by providing a
124## pre-opened opaque file to the script interpreter.  `SETUIDSCRIPTS',
125## which implies FDSCRIPTS, allows scripts to be set-user-id using the same
126## opaque file mechanism.  Perl calls this "secure setuid scripts."
127
128#options 	FDSCRIPTS
129#options 	SETUIDSCRIPTS
130
131## Options for compatibility with previous releases foreign system binaries.
132## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up
133## additional user-level utilities or system configuration files. See
134## compat_sunos(8) and compat_svr4(8).
135
136options 	COMPAT_43	# 4.3BSD system interfaces
137options 	COMPAT_09	# NetBSD 0.9 binary compatibility
138options 	COMPAT_10	# NetBSD 1.0 binary compatibility
139options 	COMPAT_11	# NetBSD 1.1 binary compatibility
140options 	COMPAT_12	# NetBSD 1.2 binary compatibility
141options 	COMPAT_13	# NetBSD 1.3 binary compatibility
142options 	COMPAT_14	# NetBSD 1.4 binary compatibility
143options 	COMPAT_15	# NetBSD 1.5 binary compatibility
144options 	COMPAT_16	# NetBSD 1.6 binary compatibility
145options 	COMPAT_20	# NetBSD 2.0 binary compatibility
146options 	COMPAT_SUNOS	# SunOS 4.x binary compatibility
147options 	COMPAT_SVR4	# SunOS 5.x binary compatibility
148#options 	COMPAT_SVR4_32	# SunOS 5.x 32-bit binary compatibility -- 64-bit only
149#options 	COMPAT_NETBSD32	# NetBSD/sparc binary compatibility -- 64-bit only
150options 	EXEC_AOUT	# execve(2) support for a.out binaries
151options 	EXEC_ELF32	# Exec module for SunOS 5.x binaries.
152#options 	SYSCALL_DEBUG
153
154#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
155
156## File systems.  You probably need at least one of FFS or NFS.
157file-system	FFS		# Berkeley Fast Filesystem
158file-system	NFS		# Sun NFS-compatible filesystem client
159file-system	KERNFS		# kernel data-structure filesystem
160file-system	NULLFS		# NULL layered filesystem
161file-system 	OVERLAY		# overlay file system
162file-system	MFS		# memory-based filesystem
163file-system	FDESC		# user file descriptor filesystem
164file-system	UMAPFS		# uid/gid remapping filesystem
165file-system	LFS		# Log-based filesystem (still experimental)
166file-system	PORTAL		# portal filesystem (still experimental)
167file-system	PROCFS		# /proc
168file-system	CD9660		# ISO 9660 + Rock Ridge file system
169file-system	UNION		# union file system
170file-system	MSDOSFS		# MS-DOS FAT filesystem(s).
171
172## File system options.
173options 	NFSSERVER	# Sun NFS-compatible filesystem server
174options 	QUOTA		# FFS quotas
175#options 	FFS_EI		# FFS Endian Independent support
176options 	SOFTDEP		# FFS soft updates support.
177
178## Network protocol support.  In most environments, INET is required.
179options 	INET		# IP (Internet Protocol) v4
180options 	INET6		# IPV6
181#options 	IPSEC		# IP security
182#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
183#options 	IPSEC_DEBUG	# debug for IP security
184#options 	GATEWAY		# packet forwarding ("router switch")
185options 	MROUTING	# packet forwarding of multicast packets
186#options 	DIRECTED_BROADCAST	# allow broadcasts through routers
187options 	NS		# Xerox NS networking
188#options 	NSIP		# Xerox NS tunneling over IP
189options 	ISO,TPIP	# OSI networking
190options 	EON		# OSI tunneling over IP
191#options 	CCITT,LLC,HDLC	# X.25 packet switched protocol
192options 	NETATALK	# AppleTalk (over Ethernet) protocol
193options 	NTP		# Network Time Protocol in-kernel support
194#options 	PPS_SYNC	# Add serial line synchronization for NTP
195options 	PFIL_HOOKS	# Add pfil(9) hooks, intended for custom LKMs.
196options 	IPFILTER_LOG	# Add ipmon(8) logging for ipfilter device
197#options 	IPFILTER_DEFAULT_BLOCK	# block all packets by default
198options 	PPP_BSDCOMP	# Add BSD compression to ppp device
199options 	PPP_DEFLATE	# Add deflate (libz) compression to ppp device
200options 	PPP_FILTER	# Add active filters for ppp (via bpf)
201#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
202
203#options 	ALTQ		# Manipulate network interfaces' output queues
204#options 	ALTQ_BLUE	# Stochastic Fair Blue
205#options 	ALTQ_CBQ	# Class-Based Queueing
206#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
207#options 	ALTQ_FIFOQ	# First-In First-Out Queue
208#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
209#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
210#options 	ALTQ_LOCALQ	# Local queueing discipline
211#options 	ALTQ_PRIQ	# Priority Queueing
212#options 	ALTQ_RED	# Random Early Detection
213#options 	ALTQ_RIO	# RED with IN/OUT
214#options 	ALTQ_WFQ	# Weighted Fair Queueing
215
216
217#### Main bus and CPU .. all systems.
218mainbus0 at root
219cpu0	at mainbus0
220
221#### Bus types found on SPARC systems.
222
223sbus0	at mainbus0				# Ultra 1
224#upa0	at mainbus0				# Ultra 1E, Ultra 2, Ex0000
225psycho*	at mainbus0				# Darwin, Ultra5
226pci*	at psycho?
227pci*	at ppb?
228ppb*	at pci?					# `APB' support.
229ebus*	at pci?					# ebus devices
230# XXX 'puc's aren't really bridges, but there's no better place for them here
231puc*	at pci? dev ? function ?		# PCI "universal" comm. cards
232
233#### Standard system devices -- all required for a given architecture
234
235## PROM console driver -- if all else fails
236pcons0	at mainbus0				# PROM console
237
238## Auxiliary system registers -- We use the OBP for power management
239auxio*	at ebus?				# auxio registers
240auxio*	at sbus? slot ? offset ?		# auxio registers
241
242# We also need:
243bpp*	at sbus? slot ? offset ?		# parallel port
244lpt*	at ebus?				# parallel port
245
246## Mostek clock found on 4/300, sun4c, sun4m and sun4u systems.
247## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems.
248clock*	at sbus? slot ? offset ?
249clock*	at ebus?
250rtc*	at ebus?
251
252## Timer chip found on 4/300, sun4c, sun4m and (some) sun4u systems.
253timer*	at mainbus0				# sun4c
254
255#### Serial port configuration
256
257## Zilog 8530 serial chips.  Each has two-channels.
258## zs0 is ttya and ttyb.  zs1 is the keyboard and mouse.
259zs*	at sbus? slot ? offset ?
260zstty*	at zs? channel ?			# ttya
261kbd0	at zstty?
262ms0	at zstty?
263
264## PCI machines have serial ports:
265##	Siemens SAB82532 controller: ttya and ttyb (`su'; sab)
266##	Part of NS PC87332VLJ Super I/O controller: kbd/mouse (`se'; com)
267
268## The SAB82532 controller has two serial ports
269sab*	at ebus?				# ttya/ttyb
270sabtty*	at sab? channel ?
271
272## Part of a PC87332VLJ
273com*	at ebus?				# `com' driver for `su'
274kbd0	at com?					# keyboard
275ms0	at com?					# mouse
276
277## Magma Serial/Parallel driver (not tested)
278#magma*	at sbus? slot ? offset ?
279#mtty*	at magma?
280#mbpp*	at magma?
281
282## SUNW,spif Serial/Parallel driver (not tested)
283#spif*  at sbus? slot ? offset ?
284#stty*  at spif?
285#sbpp*  at spif?
286
287## PCI serial interfaces
288com*	at puc? port ?			# 16x50s on "universal" comm boards
289cy*	at pci? dev ? function ?	# Cyclades Cyclom-Y serial boards
290cz*	at pci? dev ? function ?	# Cyclades-Z multi-port serial boards
291
292
293#### Disk controllers and disks
294
295## The following flags may be set for the NCR53c94 based esp driver:
296##	bits 0-7:  disable disconnect/reselect for the corresponding target
297##	bits 8-15: disable synchronous negotiation for target [bit-8]
298
299## sun4u on-board SCSI, and FSBE/S SBus SCSI cards, an NCR53c94 or
300## equivalent behind an LSI Logic DMA controller
301
302# XXX - the esp driver has problems with tagged queueing.
303# To avoid these, tagged queueing has been disabled for the first 8 targets
304# by setting those bits to 1 (starting at bit 16, see esp(4) for details).
305# If you want tagged queueing, and are sure it works for you, set the flags
306# value to 0. CAVEAT: using tagged queueing currently can cause data loss!
307
308dma*	at sbus? slot ? offset ?		# SBus
309esp*	at dma? flags 0x00ff0000		# SBus
310
311esp*	at sbus? slot ? offset ? flags 0x00ff0000
312isp*	at sbus? slot ? offset ?
313isp*	at pci? dev ? function ?	# Qlogic ISP [12]0x0 SCSI/FibreChannel
314siop*	at pci? 			# 53C8xx ("glm" compatible)
315esiop*	at pci? 			# 53C875 and newer ("glm" compatible)
316
317# PCI cryptographic devices
318hifn*	at pci? dev ? function ?	# Hifn 7755/7811/795x
319ubsec*	at pci? dev ? function ?	# Broadcom 5501/5601/580x/582x
320
321# PCI SCSI controllers
322# 	UT marks untested.
323adv*	at pci? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT
324adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI UT
325ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
326bha*	at pci? dev ? function ?	# BusLogic 9xx SCSI UT
327dpt*	at pci? dev ? function ?	# DPT SmartCache/SmartRAID UT
328iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
329pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
330trm*	at pci? dev ? function ?	# Tekram DC-395U/UW/F, DC-315/U SCSI
331
332scsibus* at scsi?
333
334## These entries find devices on all SCSI busses and assign
335## unit numbers dynamically.
336sd*	at scsibus? target ? lun ?		# SCSI disks
337st*	at scsibus? target ? lun ?		# SCSI tapes
338cd*	at scsibus? target ? lun ?		# SCSI CD-ROMs
339ch*	at scsibus? target ? lun ?		# SCSI changer devices
340ss*	at scsibus? target ? lun ?		# SCSI scanners
341ses*	at scsibus? target ? lun ?		# SCSI SES/SAF-TE devices
342uk*	at scsibus? target ? lun ?		# unknown SCSI
343
344# IDE and related devices
345# PCI IDE controllers - see pciide(4) for supported hardware.
346# The 0x0001 flag force the driver to use DMA, even if the driver doesn't know
347# how to set up DMA modes for this chip. This may work, or may cause
348# a machine hang with some controllers.
349pciide* at pci? dev ? function ? flags 0x0000	# GENERIC pciide driver
350acardide* at pci? dev ? function ?	# Acard IDE controllers
351aceride* at pci? dev ? function ?	# Acer Lab IDE controllers
352artsata* at pci? dev ? function ?	# Intel i31244 SATA controller
353cmdide* at pci? dev ? function ?	# CMD tech IDE controllers
354cypide* at pci? dev ? function ?	# Cypress IDE controllers
355hptide* at pci? dev ? function ?	# Triones/HighPoint IDE controllers
356optiide* at pci? dev ? function ?	# Opti IDE controllers
357piixide* at pci? dev ? function ?	# Intel IDE controllers
358pdcide* at pci? dev ? function ?	# Promise IDE controllers
359satalink* at pci? dev ? function ?	# SiI SATALink controllers
360siside* at pci? dev ? function ?	# SiS IDE controllers
361slide*  at pci? dev ? function ?	# Symphony Labs IDE controllers
362viaide* at pci? dev ? function ?	# VIA/AMD/Nvidia IDE controllers
363atabus* at ata?
364atapibus* at atapi?
365
366# IDE drives
367# Flags are used only with controllers that support DMA operations
368# and mode settings (e.g. some pciide controllers)
369# The lowest order four bits (rightmost digit) of the flags define the PIO
370# mode to use, the next set of four bits the DMA mode and the third set the
371# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
372# to use, and the last bit must be 1 for this setting to be used.
373# For DMA and UDMA, 0xf (1111) means 'disable'.
374# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
375# (0xc=1100, 0xa=1010, 0xf=1111)
376# 0x0000 means "use whatever the drive claims to support".
377
378## Disable UDMA 4 which causes data corruption on the Acer Labs
379## chipset on Sun Blade 100 and Netra X1 machines.
380wd*     at atabus? drive ? flags 0x0000
381
382cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
383sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives
384uk*	at atapibus? drive ? flags 0x0000	# ATAPI unknown
385
386# RAID controllers and devices (untested)
387cac*	at pci? dev ? function ?	# Compaq PCI array controllers
388mlx*	at pci? dev ? function ?	# Mylex DAC960 & DEC SWXCR family
389twe*	at pci? dev ? function ?	# 3ware Escalade RAID controllers
390
391ld*	at cac? unit ?			# logical disk devices
392ld*	at twe? unit ?
393ld*	at mlx? unit ?
394
395## Floppy controller and drive found on SPARCstations.
396
397# need share with the sparc, and everyone else.  needs to use auxio.
398# actually, the ebus version has (will have) direct access to it's AUXIO
399# register space (it is mapped in to fdthree not auxio).
400#fdc0	at sbus? slot ? offset ?		# SUNW,fdtwo
401#fdc0	at ebus?				# fdthree
402#fd*	at fdc0 	 			# the drive itself
403
404## A disk-like interface to files.  Can be used to create floppy, CD,
405## miniroot images, etc.
406
407pseudo-device	vnd	4
408
409## Concatenated and striped disks; with this, you can create a software-based
410## disk array similar to a "RAID 0" setup.  See ccd(4).
411
412pseudo-device	ccd	4
413
414## Cryptographic disk devices.  See cgd(4).
415
416#pseudo-device	cgd	4
417
418## RAIDframe disk driver: software RAID driver.  See raid(4).
419
420pseudo-device	raid	8
421options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
422# Options to enable various other RAIDframe RAID types.
423# options 	RF_INCLUDE_EVENODD=1
424# options 	RF_INCLUDE_RAID5_RS=1
425# options 	RF_INCLUDE_PARITYLOGGING=1
426# options 	RF_INCLUDE_CHAINDECLUSTER=1
427# options 	RF_INCLUDE_INTERDECLUSTER=1
428# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
429# options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
430
431
432## Memory disk device, used on boot floppies with compressed
433## kernel-plus-root-disk images.
434
435pseudo-device	md	1
436
437
438#### Network interfaces
439
440## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue
441## Three flavors of additional SBus ethernets are available.  One attaches
442## directly like the sun4c on-board, one uses the ledma device like the
443## sun4m on-board, and one uses the lebuffer device.
444
445ledma0		at sbus? slot ? offset ?	# sun4m on-board
446le0		at ledma0			# sun4m on-board
447le*		at sbus? slot ? offset ?	# SBus
448ledma*		at sbus? slot ? offset ?	# SBus
449le*		at ledma?			# SBus
450lebuffer0	at sbus? slot ? offset ?	# SBus
451le0		at lebuffer?			# SBus
452lebuffer*	at sbus? slot ? offset ?	# SBus
453le*		at lebuffer?			# SBus
454
455## Happy Meal Ethernet
456hme*		at sbus? slot ? offset ?
457hme*		at pci?	dev ? function ?	# network "hme" compatible
458
459## qec/be, qec/hme
460qec*		at sbus? slot ? offset ?
461be*		at qec?
462qe*		at qec?
463
464# PCI network interfaces
465# 	UT marks untested.
466an*	at pci? dev ? function ?	# Aironet PC4500/PC4800 (802.11) UT
467en*	at pci? dev ? function ?	# ENI/Adaptec ATM UT
468# XXX causes ICE
469#ep*	at pci? dev ? function ?	# 3Com 3c59x
470ex*	at pci? dev ? function ?	# 3Com 90x[B]
471epic*	at pci? dev ? function ?	# SMC EPIC/100 Ethernet
472esh*	at pci? dev ? function ?	# Essential HIPPI card UT
473fpa*	at pci? dev ? function ?	# DEC DEFPA FDDI UT
474fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
475gem*	at pci? dev ? function ?	# Apple GMAC and Sun ERI gigabit enet
476# XXX lacks bus_dmamap_sync()
477#le*	at pci? dev ? function ?	# PCnet-PCI Ethernet
478# XXX uses vtophys()
479#lmc*	at pci? dev ? function ?	# Lan Media Corp SSI/HSSI/DS3
480ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet UT
481ntwoc*	at pci? dev ? function ?	# Riscom/N2 PCI Sync Serial UT
482# XXX cause uncorrectable DMA error
483#pcn*	at pci? dev ? function ?	# PCnet-PCI Ethernet
484rtk*	at pci? dev ? function ?	# Realtek 8129/8139
485# XXX cause uncorrectable DMA error
486#sip*	at pci? dev ? function ?	# SiS 900 Ethernet
487ti*	at pci? dev ? function ?	# Alteon ACEnic gigabit Ethernet UT
488tl*	at pci? dev ? function ?	# ThunderLAN-based Ethernet
489tlp*	at pci? dev ? function ?	# DECchip 21x4x and clones
490vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet
491wi*	at pci? dev ? function ?	# Lucent/Intersil WaveLAN/IEEE
492
493# MII/PHY support
494# XXX: only nsphy "tested"
495dmphy*	at mii? phy ?			# Davicom DM9101 PHYs
496exphy*	at mii? phy ?			# 3Com internal PHYs
497icsphy*	at mii? phy ?			# Integrated Circuit Systems ICS189x
498inphy*	at mii? phy ?			# Intel 82555 PHYs
499iophy*	at mii? phy ?			# Intel 82553 PHYs
500lxtphy*	at mii? phy ?			# Level One LXT-970 PHYs
501nsphy*	at mii? phy ?			# NS83840 PHYs
502nsphyter* at mii? phy ?			# NS83843 PHYs
503qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
504sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
505tlphy*	at mii? phy ?			# ThunderLAN PHYs
506tqphy*	at mii? phy ?			# TDK Semiconductor PHYs
507ukphy*	at mii? phy ?			# generic unknown PHYs
508
509# PCI USB controllers
510ehci*	at pci? dev ? function ?	# Enhanced Host Controller
511ohci*	at pci? dev ? function ?	# Open Host Controller
512
513usb*	at ehci?			# USB bus support
514usb*	at ohci?
515
516uhub*	at usb?						# USB Hubs
517uhub*	at uhub? port ? configuration ? interface ?
518
519uhidev*	at uhub? port ? configuration ? interface ?	# USB HID
520uhid*	at uhidev? reportid ?				# USB Generic HID
521
522ulpt*	at uhub? port ? configuration ? interface ?	# USB Printer
523
524umodem*	at uhub? port ? configuration ?			# USB Modem
525ucom*	at umodem?
526
527umass*	at uhub? port ? configuration ? interface ?	# USB Mass Storage
528
529uaudio*	at uhub? port ? configuration ?			# USB audio
530
531# USB Ethernet adapters
532aue*	at uhub? port ?		# ADMtek AN986 Pegasus based adapters
533cue*	at uhub? port ?		# CATC USB-EL1201A based adapters
534kue*	at uhub? port ?		# Kawasaki LSI KL5KUSB101B based adapters
535uax*	at uhub? port ?		# ASIX AX88172 based adapters
536url*	at uhub? port ?		# Realtek RTL8150L based adapters
537
538uscanner* at uhub? port ?				# USB scanners
539uyap*	at uhub? port ?					# Y@P firmware loader
540ugen*	at uhub? port ? configuration ? interface ?	# USB Generic driver
541
542# PCI IEEE1394 controllers
543fwohci*	at pci? dev ? function ?	# IEEE1394 Open Host Controller
544#fwlynx* at pci? dev ? function ?	# IEEE1394 TI Lynx Controller
545fw*	at fwbus?			# IP over 1394
546
547# IEEE1394 nodes
548#fwnode* at fwbus? idhi ? idlo ?
549#sbpscsi* at fwnode?
550
551## Loopback network interface; required
552pseudo-device	loop
553
554## SLIP and CSLIP interfaces, for IP over a serial line.
555pseudo-device	sl		2
556
557## PPP, the successor to SLIP.  See pppd(8).
558pseudo-device	ppp		2
559
560## PPP over Ethernet (RFC 2516)
561pseudo-device	pppoe
562
563## Starmode Radio IP, a special hardware network device.
564pseudo-device	strip		1
565
566## Network "tunnel" device, allowing protocol stacks to run in the userland.
567## This is used by the third-party user-mode "ppp" program, and others.
568pseudo-device	tun		4
569
570## Generic L3 over IP tunnel
571#pseudo-device	gre		2	# generic L3 over IP tunnel
572
573## Berkeley Packet Filter, required to run RARPD.  A generic C-language
574## interface that allows selective examining of incoming packets.
575pseudo-device	bpfilter	8
576
577## IEEE 802.1q encapsulation
578pseudo-device	vlan
579
580## Simple inter-network traffic bridging
581pseudo-device	bridge
582#options 	BRIDGE_IPF		# bridge uses IP/IPv6 pfil hooks too
583
584## IP Filter, used in firewall and NAT applications.  See ipnat(8) for
585## one example of the use of the IP Filter.
586pseudo-device	ipfilter
587
588## for IPv6
589pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
590#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
591#pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
592
593
594#### CardBus and PCMCIA devices
595
596# PCI CardBus bridge support
597#cbb*	at pci? dev ? function ?
598#cardslot* at cbb?
599
600# CardBus bus support
601#cardbus* at cardslot?
602#pcmcia* at cardslot?
603
604## CardBus cards; UT marks untested.
605
606# CardBus serial interfaces
607#com*	at cardbus? dev ? function ?	# Modems and serial cards UT
608
609# CardBus SCSI controllers
610#adv*	at cardbus? dev ? function ?	# AdvanSys 1200[A,B], 9xx[U,UA] SCSI UT
611#ahc*	at cardbus? dev ? function ?	# Adaptec ADP-1480 UT
612
613# CardBus network interfaces
614#ex*	at cardbus? dev ? function ?	# 3Com 3C575TX UT
615#fxp*	at cardbus? dev ? function ?	# Intel i8255x UT
616#rtk*	at cardbus? dev ? function ?	# Realtek 8129/8139 UT
617#tlp*	at cardbus? dev ? function ?	# DECchip 21143 UT
618
619# CardBus USB controllers
620#ehci*	at cardbus? dev ? function ?	# Enhanced Host Controller
621#ohci*	at cardbus? dev ? function ?	# Open Host Controller
622
623# CardBus IEEE1394 controllers
624#fwohci* at cardbus? dev ? function ?	# IEEE1394 Open Host Controller UT
625
626## PCMCIA cards; UT marks untested.
627
628# PCMCIA serial interfaces
629#com*	at pcmcia? function ?		# Modems and serial cards
630
631#pcmcom* at pcmcia? function ?		# PCMCIA multi-port serial cards UT
632#com*	at pcmcom? slave ?		# ...and the slave devices
633
634# PCMCIA SCSI controllers
635#aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI UT
636#esp*	at pcmcia? function ?		# Qlogic ESP406/FAS408 SCSI UT
637
638# PCMCIA IDE controllers
639#wdc*	at pcmcia? function ?
640
641# PCMCIA network interfaces
642#an*	at pcmcia? function ?		# Aironet PC4500/PC4800 (802.11) UT
643#awi*	at pcmcia? function ?		# BayStack 650/660 (802.11FH/DS) UT
644#cnw*	at pcmcia? function ?		# Xircom/Netwave AirSurfer UT
645#ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
646#mbe*	at pcmcia? function ?		# MB8696x based Ethernet UT
647#ne*	at pcmcia? function ?		# NE2000-compatible Ethernet
648#ray*	at pcmcia? function ?		# Raytheon Raylink (802.11) UT
649#sm*	at pcmcia? function ?		# Megahertz Ethernet UT
650# tr at pcmcia has problems with Cardbus bridges
651#tr*	at pcmcia? function ?		# TROPIC based Token-Ring UT
652#wi*	at pcmcia? function ?		# Lucent/Intersil WaveLan IEEE (802.11)
653#xi*	at pcmcia? function ?		# Xircom CreditCard Ethernet UT
654
655#mhzc*	at pcmcia? function ?		# Megahertz Ethernet/Modem combo cards
656#com*	at mhzc?
657#sm*	at mhzc?
658
659
660#### Audio and video devices
661
662## /dev/audio support (`audiocs' plus `audio')
663##
664audiocs*	at sbus? slot ? offset ?	# SUNW,CS4231
665audiocs*	at ebus?			# SUNW,CS4231 in U5/U10
666autri*		at pci? dev ? function ?	# Blade 100 'sound'
667
668audio*		at audiobus?
669
670#midi*		at midibus?
671
672
673## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m
674## systems.  If your sun4 system has a cgfour installed in the P4 slot,
675## the P4 entries for "bwtwo" will attach to the overlay plane of the
676## "cgfour".
677
678#bwtwo0		at sbus? slot ? offset ?	# sun4c and sun4m
679#bwtwo*		at sbus? slot ? offset ?
680
681## Sun "cgthree" Sbus color framebuffer
682#cgthree0	at sbus? slot ? offset ?
683#cgthree*	at sbus? slot ? offset ?
684
685## Sun "cgsix" accelerated color framebuffer.
686cgsix0		at sbus? slot ? offset ?
687cgsix*		at sbus? slot ? offset ?
688
689## Sun FFB not supported
690#ffb*		at mainbus0
691#wsdisplay*	at ffb?
692
693#### Other device configuration
694
695### Other pseudo-devices
696
697pseudo-device 	crypto			# opencrypto framework
698
699## Pseudo ttys, required for network logins and programs like screen.
700
701pseudo-device	pty			# pseudo-ttys (for network, etc.)
702
703## Random device, used to implement /dev/random (a source of random noise),
704## and generate randomness for some kernel formulae.
705
706pseudo-device	rnd
707
708pseudo-device	clockctl		# user control of clock subsystem
709pseudo-device	ksyms			# /dev/ksyms
710#pseudo-device	pf			# PF packet filter
711#pseudo-device	pflog			# PF log if
712