Makefile.sparc64 revision 1.51 1 # $NetBSD: Makefile.sparc64,v 1.51 2003/10/27 05:49:15 christos Exp $
2
3 #=========================================================================
4 #
5 # ***** WARNING ******
6 #
7 # ANYONE WHO CHANGES THIS MAKEFILE AND DOES NOT TEST BOTH A 32-BIT
8 # AND 64-BIT KERNEL WILL BE SHOT.
9 #
10 #=========================================================================
11
12
13 # Makefile for NetBSD
14 #
15 # This makefile is constructed from a machine description:
16 # config machineid
17 # Most changes should be made in the machine description
18 # /sys/arch/sparc64/conf/``machineid''
19 # after which you should do
20 # config machineid
21 # Machine generic makefile changes should be made in
22 # /sys/arch/sparc64/conf/Makefile.sparc64
23 # after which config should be rerun for all machines of that type.
24 #
25 # To specify debugging, add the config line: makeoptions DEBUG="-g"
26 # A better way is to specify -g only for a few files.
27 #
28 # makeoptions DEBUGLIST="uvm* trap if_*"
29
30 # Default to 32-bit. Set the MACHINE_ARCH accordingly.
31 #
32 # You must also be using the correct toolchain or the kernel build
33 # will fail.
34 #
35 LP64?= no
36 .if ${LP64} == "yes"
37 MACHINE_ARCH=sparc64
38 .else
39 MACHINE_ARCH=sparc
40 .endif
41
42 USETOOLS?= no
43 NEED_OWN_INSTALL_TARGET?=no
44 .include <bsd.own.mk>
45
46 ##
47 ## (1) port identification
48 ##
49 SPARC64= $S/arch/sparc64
50 GENASSYM= ${SPARC64}/sparc64/genassym.cf
51
52 ##
53 ## (2) compile settings
54 ##
55 CPPFLAGS+= -Dsparc64 -D__sparc64__
56 .if ${LP64} == "yes"
57 # 64-bit kernels
58 CPPFLAGS+= -D_LP64 -Wa,-Av9a
59 AFLAGS+= -Wa,-Av9a
60 .if defined(PROF)
61 # Profiling is only supported in the medium low memory model.
62 CFLAGS+= -mcmodel=medlow
63 .else
64 # Since the kernel resides in the lower 32 bits, use medium low for now anyway.
65 CFLAGS+= -mcmodel=medlow
66 .endif
67 .else
68 # 32-bit kernels
69 CPPFLAGS+= -m32 -Wa,-Av8plusa -mcpu=ultrasparc
70 AFLAGS+= -Wa,-Av8plusa
71 .endif
72 CFLAGS+= -mno-fpu
73 AFLAGS+= -x assembler-with-cpp -traditional-cpp
74
75 ##
76 ## (3) libkern and compat
77 ##
78 # KERN_AS= obj # bcopy, bzero, memcpy, memset, etc. are in locore.s
79
80 ##
81 ## (4) local objects, compile rules, and dependencies
82 ##
83 MD_OBJS= locore.o
84 MD_CFILES=
85 MD_SFILES= ${SPARC64}/sparc64/locore.s
86
87 locore.o: ${SPARC64}/sparc64/locore.s assym.h
88 ${NORMAL_S}
89
90 in_cksum.o: assym.h
91
92 ##
93 ## (5) link settings
94 ##
95 TEXTADDR?= 01000000
96 DATAADDR?= 01800000
97 LINKFORMAT= -n -T ${SPARC64}/conf/${KERN_LDSCRIPT}
98 .if ${LP64} == "yes"
99 KERN_LDSCRIPT?= kern.ldscript
100 .else
101 KERN_LDSCRIPT?= kern32.ldscript
102 .endif
103
104 ##
105 ## (6) port specific target dependencies
106 ##
107
108 # depend on CPU configuration
109 bwtwo.o cgsix.o cgthree.o cgtwo.o cons.o dma.o esp.o fb.o if_ie.o: Makefile
110 ms.c obio.o zs.c autoconf.o clock.o cpu.o disksubr.o locore.o: Makefile
111 machdep.o mem.o openprom.o pmap.o vm_machdep.o: Makefile
112
113 ##
114 ## (7) misc settings
115 ##
116
117 # define .MAIN _before_ the make() check, so that implicit target
118 # would be defined
119 .MAIN: all
120
121 .if make(depend) || make(all) || make(dependall)
122 .BEGIN:
123 @rm -f sparc && \
124 ln -s $S/arch/sparc/include sparc
125 .endif
126
127 ##
128 ## (8) config(8) generated machinery
129 ##
130 %INCLUDES
131
132 %OBJS
133
134 %CFILES
135
136 %SFILES
137
138 %LOAD
139
140 %RULES
141
142 ##
143 ## (9) port independent kernel machinery
144 ##
145 .include "$S/conf/Makefile.kern.inc"
146