auxio.c revision 1.10 1 /* $NetBSD: auxio.c,v 1.10 2003/06/16 19:24:51 heas Exp $ */
2
3 /*
4 * Copyright (c) 2000, 2001 Matthew R. Green
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
24 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 */
30
31 /*
32 * AUXIO registers support on the sbus & ebus2, used for the floppy driver
33 * and to control the system LED, for the BLINK option.
34 */
35
36 #include "opt_auxio.h"
37
38 #include <sys/param.h>
39 #include <sys/systm.h>
40 #include <sys/kernel.h>
41 #include <sys/callout.h>
42 #include <sys/errno.h>
43 #include <sys/device.h>
44 #include <sys/malloc.h>
45
46 #include <machine/autoconf.h>
47 #include <machine/cpu.h>
48
49 #include <dev/ebus/ebusreg.h>
50 #include <dev/ebus/ebusvar.h>
51 #include <sparc64/dev/sbusvar.h>
52 #include <sparc64/dev/auxioreg.h>
53
54 /*
55 * on sun4u, auxio exists with one register (LED) on the sbus, and 5
56 * registers on the ebus2 (pci) (LED, PCIMODE, FREQUENCY, SCSI
57 * OSCILLATOR, and TEMP SENSE.
58 */
59
60 struct auxio_softc {
61 struct device sc_dev;
62
63 /* parent's tag */
64 bus_space_tag_t sc_tag;
65
66 /* handles to the various auxio regsiter sets */
67 bus_space_handle_t sc_led;
68 bus_space_handle_t sc_pci;
69 bus_space_handle_t sc_freq;
70 bus_space_handle_t sc_scsi;
71 bus_space_handle_t sc_temp;
72
73 int sc_flags;
74 #define AUXIO_LEDONLY 0x1
75 #define AUXIO_EBUS 0x2
76 #define AUXIO_SBUS 0x4
77 };
78
79 #define AUXIO_ROM_NAME "auxio"
80
81 void auxio_attach_common(struct auxio_softc *);
82 int auxio_ebus_match(struct device *, struct cfdata *, void *);
83 void auxio_ebus_attach(struct device *, struct device *, void *);
84 int auxio_sbus_match(struct device *, struct cfdata *, void *);
85 void auxio_sbus_attach(struct device *, struct device *, void *);
86
87 CFATTACH_DECL(auxio_ebus, sizeof(struct auxio_softc),
88 auxio_ebus_match, auxio_ebus_attach, NULL, NULL);
89
90 CFATTACH_DECL(auxio_sbus, sizeof(struct auxio_softc),
91 auxio_sbus_match, auxio_sbus_attach, NULL, NULL);
92
93 #ifdef BLINK
94 static struct callout blink_ch = CALLOUT_INITIALIZER;
95
96 static void auxio_blink(void *);
97
98 static void
99 auxio_blink(x)
100 void *x;
101 {
102 struct auxio_softc *sc = x;
103 int s;
104 u_int32_t led;
105
106 s = splhigh();
107 if (sc->sc_flags & AUXIO_EBUS)
108 led = le32toh(bus_space_read_4(sc->sc_tag, sc->sc_led, 0));
109 else
110 led = bus_space_read_1(sc->sc_tag, sc->sc_led, 0);
111 if (led & AUXIO_LED_LED)
112 led = 0;
113 else
114 led = AUXIO_LED_LED;
115 if (sc->sc_flags & AUXIO_EBUS)
116 bus_space_write_4(sc->sc_tag, sc->sc_led, 0, htole32(led));
117 else
118 bus_space_write_1(sc->sc_tag, sc->sc_led, 0, led);
119 splx(s);
120
121 /*
122 * Blink rate is:
123 * full cycle every second if completely idle (loadav = 0)
124 * full cycle every 2 seconds if loadav = 1
125 * full cycle every 3 seconds if loadav = 2
126 * etc.
127 */
128 s = (((averunnable.ldavg[0] + FSCALE) * hz) >> (FSHIFT + 1));
129 callout_reset(&blink_ch, s, auxio_blink, sc);
130 }
131 #endif
132
133 void
134 auxio_attach_common(sc)
135 struct auxio_softc *sc;
136 {
137 #ifdef BLINK
138 static int do_once = 1;
139
140 /* only start one blinker */
141 if (do_once) {
142 auxio_blink(sc);
143 do_once = 0;
144 }
145 #endif
146 printf("\n");
147 }
148
149 int
150 auxio_ebus_match(parent, cf, aux)
151 struct device *parent;
152 struct cfdata *cf;
153 void *aux;
154 {
155 struct ebus_attach_args *ea = aux;
156
157 return (strcmp(AUXIO_ROM_NAME, ea->ea_name) == 0);
158 }
159
160 void
161 auxio_ebus_attach(parent, self, aux)
162 struct device *parent, *self;
163 void *aux;
164 {
165 struct auxio_softc *sc = (struct auxio_softc *)self;
166 struct ebus_attach_args *ea = aux;
167
168 sc->sc_tag = ea->ea_bustag;
169
170 if (ea->ea_nreg < 1) {
171 printf(": no registers??\n");
172 return;
173 }
174
175 if (ea->ea_nreg != 5) {
176 printf(": not 5 (%d) registers, only setting led",
177 ea->ea_nreg);
178 sc->sc_flags = AUXIO_LEDONLY|AUXIO_EBUS;
179 } else if (ea->ea_nvaddr == 5) {
180 sc->sc_flags = AUXIO_EBUS;
181
182 sparc_promaddr_to_handle(sc->sc_tag,
183 ea->ea_vaddr[1], &sc->sc_pci);
184 sparc_promaddr_to_handle(sc->sc_tag,
185 ea->ea_vaddr[2], &sc->sc_freq);
186 sparc_promaddr_to_handle(sc->sc_tag,
187 ea->ea_vaddr[3], &sc->sc_scsi);
188 sparc_promaddr_to_handle(sc->sc_tag,
189 ea->ea_vaddr[4], &sc->sc_temp);
190 } else {
191 sc->sc_flags = AUXIO_EBUS;
192 bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[1]),
193 ea->ea_reg[1].size, 0, &sc->sc_pci);
194 bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[2]),
195 ea->ea_reg[2].size, 0, &sc->sc_freq);
196 bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[3]),
197 ea->ea_reg[3].size, 0, &sc->sc_scsi);
198 bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[4]),
199 ea->ea_reg[4].size, 0, &sc->sc_temp);
200 }
201
202 if (ea->ea_nvaddr > 0) {
203 sparc_promaddr_to_handle(sc->sc_tag,
204 ea->ea_vaddr[0], &sc->sc_led);
205 } else {
206 bus_space_map(sc->sc_tag, EBUS_ADDR_FROM_REG(&ea->ea_reg[0]),
207 ea->ea_reg[0].size, 0, &sc->sc_led);
208 }
209
210 auxio_attach_common(sc);
211 }
212
213 int
214 auxio_sbus_match(parent, cf, aux)
215 struct device *parent;
216 struct cfdata *cf;
217 void *aux;
218 {
219 struct sbus_attach_args *sa = aux;
220
221 return (strcmp(AUXIO_ROM_NAME, sa->sa_name) == 0);
222 }
223
224 void
225 auxio_sbus_attach(parent, self, aux)
226 struct device *parent, *self;
227 void *aux;
228 {
229 struct auxio_softc *sc = (struct auxio_softc *)self;
230 struct sbus_attach_args *sa = aux;
231
232 sc->sc_tag = sa->sa_bustag;
233
234 if (sa->sa_nreg < 1) {
235 printf(": no registers??\n");
236 return;
237 }
238
239 if (sa->sa_nreg != 1) {
240 printf(": not 1 (%d/%d) registers??", sa->sa_nreg,
241 sa->sa_npromvaddrs);
242 return;
243 }
244
245 /* sbus auxio only has one set of registers */
246 sc->sc_flags = AUXIO_LEDONLY|AUXIO_SBUS;
247 if (sa->sa_npromvaddrs > 0) {
248 sbus_promaddr_to_handle(sc->sc_tag,
249 sa->sa_promvaddr, &sc->sc_led);
250 } else {
251 sbus_bus_map(sc->sc_tag, sa->sa_slot, sa->sa_offset,
252 sa->sa_size, 0, &sc->sc_led);
253 }
254
255 auxio_attach_common(sc);
256 }
257