sparc64/dev/kd.c

/*	$NetBSD: kd.c,v 1.4 1999/05/23 02:45:19 eeh Exp $	*/

/*-
 * Copyright (c) 1996 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Gordon W. Ross.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Keyboard/Display device.
 *
 * This driver exists simply to provide a tty device that
 * the indirect console driver can point to.
 * The kbd driver sends its input here.
 * Output goes to the screen via PROM printf.
 */

#include <sys/param.h>
#include <sys/proc.h>
#include <sys/systm.h>
#include <sys/ioctl.h>
#include <sys/tty.h>
#include <sys/file.h>
#include <sys/conf.h>
#include <sys/device.h>

#include <machine/openfirm.h>
#include <machine/eeprom.h>
#include <machine/psl.h>
#include <machine/cpu.h>
#include <machine/kbd.h>
#include <machine/autoconf.h>
#include <machine/conf.h>

#ifdef RASTERCONSOLE
#include <machine/fbio.h>
#include <machine/fbvar.h>
#endif


#include <dev/cons.h>
#include <dev/sun/kbd_xlate.h>
#include <sparc64/dev/cons.h>

struct	tty *fbconstty = 0;	/* tty structure for frame buffer console */
int cnrom __P((void));
void cnrint __P((void));

#define	KDMAJOR 1
#define PUT_WSIZE	64

struct kd_softc {
	struct	device kd_dev;		/* required first: base device */
	struct  tty *kd_tty;
	int rows, cols;
};

/*
 * There is no point in pretending there might be
 * more than one keyboard/display device.
 */
static struct kd_softc kd_softc;
static int kd_is_console;

static int kdparam(struct tty *, struct termios *);
static void kdstart(struct tty *);

int	rom_console_input;	/* when set, hardclock calls cnrom() */
int	cons_ocount;		/* output byte count */

/* Now talking directly to the zs, so this is not needed. */
int
cnrom()
{
  return (0);
}
void
cnrint()
{
}

/*
 * This is called by kbd_attach()
 * XXX - Make this a proper child of kbd?
 */
void
kd_init(unit)
	int unit;
{
	struct kd_softc *kd;
	struct tty *tp;
	int i;
	char *prop;


	if (unit != 0)
		return;
	kd = &kd_softc; 	/* XXX */

	tp = ttymalloc();
	tp->t_oproc = kdstart;
	tp->t_param = kdparam;
	tp->t_dev = makedev(KDMAJOR, unit);

#if 1	/* XXX - Why? */
	clalloc(&tp->t_rawq, 1024, 1);
	clalloc(&tp->t_canq, 1024, 1);
	/* output queue doesn't need quoting */
	clalloc(&tp->t_outq, 1024, 0);
#endif

	tty_attach(tp);
	kd->kd_tty = tp;

	/*
	 * get the console struct winsize.
	 */
	if (kd_is_console) {
		fbconstty = tp;
#ifdef RASTERCONSOLE
		kd->rows = fbrcons_rows();
		kd->cols = fbrcons_cols();
#endif
	}

	if (kd->rows == 0 &&
	    (prop = getpropstring(optionsnode, "screen-#rows"))) {
		i = 0;
		while (*prop != '\0')
			i = i * 10 + *prop++ - '0';
		kd->rows = (unsigned short)i;
	}
	if (kd->cols == 0 &&
	    (prop = getpropstring(optionsnode, "screen-#columns"))) {
		i = 0;
		while (*prop != '\0')
			i = i * 10 + *prop++ - '0';
		kd->cols = (unsigned short)i;
	}
	return;
}

struct tty *
kdtty(dev)
	dev_t dev;
{
	struct kd_softc *kd;

	kd = &kd_softc; 	/* XXX */
	return (kd->kd_tty);
}

int
kdopen(dev, flag, mode, p)
	dev_t dev;
	int flag, mode;
	struct proc *p;
{
	struct kd_softc *kd;
	int error, s, unit;
	struct tty *tp;

	unit = minor(dev);
	if (unit != 0)
		return ENXIO;
	kd = &kd_softc; 	/* XXX */
	tp = kd->kd_tty;

	if ((error = kbd_iopen(unit)) != 0) {
#ifdef	DIAGNOSTIC
		printf("kd: kbd_iopen, error=%d\n", error);
#endif
		return (error);
	}

	/* It's simpler to do this up here. */
	if (((tp->t_state & (TS_ISOPEN | TS_XCLUDE))
	     ==             (TS_ISOPEN | TS_XCLUDE))
	    && (p->p_ucred->cr_uid != 0) )
	{
		return (EBUSY);
	}

	s = spltty();

	if ((tp->t_state & TS_ISOPEN) == 0) {
		/* First open. */
		ttychars(tp);
		tp->t_iflag = TTYDEF_IFLAG;
		tp->t_oflag = TTYDEF_OFLAG;
		tp->t_cflag = TTYDEF_CFLAG;
		tp->t_lflag = TTYDEF_LFLAG;
		tp->t_ispeed = tp->t_ospeed = TTYDEF_SPEED;
		(void) kdparam(tp, &tp->t_termios);
		ttsetwater(tp);
		tp->t_winsize.ws_row = kd->rows;
		tp->t_winsize.ws_col = kd->cols;
		/* Flush pending input?  Clear translator? */
		/* This (pseudo)device always has SOFTCAR */
		tp->t_state |= TS_CARR_ON;
	}

	splx(s);

	return ((*linesw[tp->t_line].l_open)(dev, tp));
}

int
kdclose(dev, flag, mode, p)
	dev_t dev;
	int flag, mode;
	struct proc *p;
{
	struct kd_softc *kd;
	struct tty *tp;

	kd = &kd_softc; 	/* XXX */
	tp = kd->kd_tty;

	/* XXX This is for cons.c. */
	if ((tp->t_state & TS_ISOPEN) == 0)
		return 0;

	(*linesw[tp->t_line].l_close)(tp, flag);
	ttyclose(tp);
	return (0);
}

int
kdread(dev, uio, flag)
	dev_t dev;
	struct uio *uio;
	int flag;
{
	struct kd_softc *kd;
	struct tty *tp;

	kd = &kd_softc; 	/* XXX */
	tp = kd->kd_tty;

	return ((*linesw[tp->t_line].l_read)(tp, uio, flag));
}

int
kdwrite(dev, uio, flag)
	dev_t dev;
	struct uio *uio;
	int flag;
{
	struct kd_softc *kd;
	struct tty *tp;

	kd = &kd_softc; 	/* XXX */
	tp = kd->kd_tty;

	return ((*linesw[tp->t_line].l_write)(tp, uio, flag));
}

int
kdioctl(dev, cmd, data, flag, p)
	dev_t dev;
	u_long cmd;
	caddr_t data;
	int flag;
	struct proc *p;
{
	struct kd_softc *kd;
	struct tty *tp;
	int error;

	kd = &kd_softc; 	/* XXX */
	tp = kd->kd_tty;

	error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
	if (error >= 0)
		return error;
	error = ttioctl(tp, cmd, data, flag, p);
	if (error >= 0)
		return error;

	/* Handle any ioctl commands specific to kbd/display. */
	/* XXX - Send KB* ioctls to kbd module? */
	/* XXX - Send FB* ioctls to fb module?  */

	return ENOTTY;
}

void
kdstop(tp, flag)
	struct tty *tp;
	int flag;
{

}


static int
kdparam(tp, t)
	struct tty *tp;
	struct termios *t;
{
	/* XXX - These are ignored... */
	tp->t_ispeed = t->c_ispeed;
	tp->t_ospeed = t->c_ospeed;
	tp->t_cflag = t->c_cflag;
	return 0;
}


static void kd_later(void*);
static void kd_putfb(struct tty *);

static void
kdstart(tp)
	struct tty *tp;
{
	struct clist *cl;
	register int s;

	s = spltty();
	if (tp->t_state & (TS_BUSY|TS_TTSTOP|TS_TIMEOUT))
		goto out;

	cl = &tp->t_outq;
	if (cl->c_cc) {
		if (kd_is_console) {
			tp->t_state |= TS_BUSY;
			if ((s & PSR_PIL) == 0) {
				/* called at level zero - update screen now. */
				(void) splsoftclock();
				kd_putfb(tp);
				(void) spltty();
				tp->t_state &= ~TS_BUSY;
			} else {
				/* called at interrupt level - do it later */
				timeout(kd_later, (void*)tp, 0);
			}
		} else {
			/*
			 * This driver uses the PROM for writing the screen,
			 * and that only works if this is the console device.
			 * If this is not the console, just flush the output.
			 * Sorry.  (In that case, use xdm instead of getty.)
			 */
			ndflush(cl, cl->c_cc);
		}
	}
	if (cl->c_cc <= tp->t_lowat) {
		if (tp->t_state & TS_ASLEEP) {
			tp->t_state &= ~TS_ASLEEP;
			wakeup((caddr_t)cl);
		}
		selwakeup(&tp->t_wsel);
	}
out:
	splx(s);
}

/*
 * Timeout function to do delayed writes to the screen.
 * Called at splsoftclock when requested by kdstart.
 */
static void
kd_later(tpaddr)
	void *tpaddr;
{
	struct tty *tp = tpaddr;
	register int s;

	kd_putfb(tp);

	s = spltty();
	tp->t_state &= ~TS_BUSY;
	(*linesw[tp->t_line].l_start)(tp);
	splx(s);
}

/*
 * Put text on the screen using the PROM monitor.
 * This can take a while, so to avoid missing
 * interrupts, this is called at splsoftclock.
 */
static void
kd_putfb(tp)
	struct tty *tp;
{
	char buf[PUT_WSIZE];
	struct clist *cl = &tp->t_outq;
	char *p, *end;
	int len;

	while ((len = q_to_b(cl, buf, PUT_WSIZE-1)) > 0) {
		/* PROM will barf if high bits are set. */
		p = buf;
		end = buf + len;
		while (p < end)
			*p++ &= 0x7f;
		/* Now let the PROM print it. */
		OF_write(OF_stdout(), buf, len);
	}
}

/*
 * Our "interrupt" routine for input. This is called by
 * the keyboard driver (dev/sun/kbd.c) at spltty.
 */
void
kd_input(c)
	int c;
{
	struct kd_softc *kd = &kd_softc;
	struct tty *tp;

	/* XXX: Make sure the device is open. */
	tp = kd->kd_tty;
	if (tp == NULL)
		return;
	if ((tp->t_state & TS_ISOPEN) == 0)
		return;

	(*linesw[tp->t_line].l_rint)(c, tp);
}


/****************************************************************
 * kd console support
 ****************************************************************/

/* The debugger gets its own key translation state. */
static struct kbd_state kdcn_state;

static void kdcnprobe __P((struct consdev *));
static void kdcninit __P((struct consdev *));
static int  kdcngetc __P((dev_t));
static void kdcnputc __P((dev_t, int));
static void kdcnpollc __P((dev_t, int));

/* The keyboard driver uses cn_hw to access the real console driver */
extern struct consdev consdev_prom;
struct consdev *cn_hw = &consdev_prom;
struct consdev consdev_kd = {
	kdcnprobe,
	kdcninit,
	kdcngetc,
	kdcnputc,
	kdcnpollc,
};

/* We never call this. */
static void
kdcnprobe(cn)
	struct consdev *cn;
{
}

static void
kdcninit(cn)
	struct consdev *cn;
{
	struct kbd_state *ks = &kdcn_state;

	cn->cn_dev = makedev(KDMAJOR, 0);
	cn->cn_pri = CN_INTERNAL;

	/* This prepares kbd_translate() */
	ks->kbd_id = KBD_MIN_TYPE;
	kbd_xlate_init(ks);

	/* Indicate that it is OK to use the PROM fbwrite */
	kd_is_console = 1;
}

static int
kdcngetc(dev)
	dev_t dev;
{
	struct kbd_state *ks = &kdcn_state;
	int code, class, data, keysym;

	for (;;) {
		code = (*cn_hw->cn_getc)(dev);
		keysym = kbd_code_to_keysym(ks, code);
		class = KEYSYM_CLASS(keysym);

		switch (class) {
		case KEYSYM_ASCII:
			goto out;

		case KEYSYM_CLRMOD:
		case KEYSYM_SETMOD:
			data = (keysym & 0x1F);
			/* Only allow ctrl or shift. */
			if (data > KBMOD_SHIFT_R)
				break;
			data = 1 << data;
			if (class == KEYSYM_SETMOD)
				ks->kbd_modbits |= data;
			else
				ks->kbd_modbits &= ~data;
			break;

		case KEYSYM_ALL_UP:
			/* No toggle keys here. */
			ks->kbd_modbits = 0;
			break;

		default:	/* ignore all other keysyms */
			break;
		}
	}
out:
	return (keysym);
}

static void
kdcnputc(dev, c)
	dev_t dev;
	int c;
{
	int s;
	char c0 = (c & 0x7f);

	s = splhigh();
	OF_write(OF_stdout(), &c0, 1);
	splx(s);
}

static void
kdcnpollc(dev, on)
	dev_t dev;
	int on;
{
	struct kbd_state *ks = &kdcn_state;

	if (on) {
		/* Entering debugger. */
#if NFB > 0
		fb_unblank();
#endif
		/* Clear shift keys too. */
		ks->kbd_modbits = 0;
	} else {
		/* Resuming kernel. */
	}
	(*cn_hw->cn_pollc)(dev, on);
}