lpt_ebus.c revision 1.18 1 /* $NetBSD: lpt_ebus.c,v 1.18 2003/07/15 03:36:05 lukem Exp $ */
2
3 /*
4 * Copyright (c) 1999, 2000 Matthew R. Green
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 * 3. The name of the author may not be used to endorse or promote products
16 * derived from this software without specific prior written permission.
17 *
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
19 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
20 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
21 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
22 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
23 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
24 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
25 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
26 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
28 * SUCH DAMAGE.
29 */
30
31 /*
32 * NS Super I/O PC87332VLJ "lpt" to ebus attachment
33 */
34
35 #include <sys/cdefs.h>
36 __KERNEL_RCSID(0, "$NetBSD: lpt_ebus.c,v 1.18 2003/07/15 03:36:05 lukem Exp $");
37
38 #include <sys/types.h>
39 #include <sys/param.h>
40 #include <sys/systm.h>
41 #include <sys/device.h>
42 #include <sys/tty.h>
43
44 #include <machine/bus.h>
45
46 #include <dev/ebus/ebusreg.h>
47 #include <dev/ebus/ebusvar.h>
48
49 #include <dev/ic/lptvar.h>
50
51 int lpt_ebus_match __P((struct device *, struct cfdata *, void *));
52 void lpt_ebus_attach __P((struct device *, struct device *, void *));
53
54 CFATTACH_DECL(lpt_ebus, sizeof(struct lpt_softc),
55 lpt_ebus_match, lpt_ebus_attach, NULL, NULL);
56
57 #define ROM_LPT_NAME "ecpp"
58
59 int
60 lpt_ebus_match(parent, match, aux)
61 struct device *parent;
62 struct cfdata *match;
63 void *aux;
64 {
65 struct ebus_attach_args *ea = aux;
66
67 if (strcmp(ea->ea_name, ROM_LPT_NAME) == 0)
68 return (1);
69
70 return (0);
71 }
72
73 void
74 lpt_ebus_attach(parent, self, aux)
75 struct device *parent, *self;
76 void *aux;
77 {
78 struct lpt_softc *sc = (void *)self;
79 struct ebus_attach_args *ea = aux;
80 int i;
81
82 sc->sc_iot = ea->ea_bustag;
83 /*
84 * Addresses that should be supplied by the prom:
85 * - normal lpt registers
86 * - ns873xx configuration registers
87 * - DMA space
88 * The `lpt' driver does not use DMA accesses, so we can
89 * ignore that for now. We should enable the lpt port in
90 * the ns873xx registers here. XXX
91 *
92 * Use the prom address if there.
93 */
94 if (ea->ea_nvaddr)
95 sparc_promaddr_to_handle(sc->sc_iot, ea->ea_vaddr[0],
96 &sc->sc_ioh);
97 else if (bus_space_map(sc->sc_iot,
98 EBUS_ADDR_FROM_REG(&ea->ea_reg[0]),
99 ea->ea_reg[0].size,
100 0,
101 &sc->sc_ioh) != 0) {
102 printf(": can't map register space\n");
103 return;
104 }
105
106 for (i = 0; i < ea->ea_nintr; i++)
107 bus_intr_establish(ea->ea_bustag, ea->ea_intr[i],
108 IPL_SERIAL, lptintr, sc);
109 printf("\n");
110
111 lpt_attach_subr(sc);
112 }
113