Home | History | Annotate | Line # | Download | only in dev
sbusvar.h revision 1.2
      1 /*	$NetBSD: sbusvar.h,v 1.2 1998/08/13 02:10:43 eeh Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 1998 The NetBSD Foundation, Inc.
      5  * All rights reserved.
      6  *
      7  * This code is derived from software contributed to The NetBSD Foundation
      8  * by Paul Kranenburg.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *        This product includes software developed by the NetBSD
     21  *        Foundation, Inc. and its contributors.
     22  * 4. Neither the name of The NetBSD Foundation nor the names of its
     23  *    contributors may be used to endorse or promote products derived
     24  *    from this software without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     27  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     28  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     29  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     30  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     31  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     32  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     33  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     34  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     35  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     36  * POSSIBILITY OF SUCH DAMAGE.
     37  */
     38 
     39 /*
     40  * Copyright (c) 1992, 1993
     41  *	The Regents of the University of California.  All rights reserved.
     42  *
     43  * This software was developed by the Computer Systems Engineering group
     44  * at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
     45  * contributed to Berkeley.
     46  *
     47  * All advertising materials mentioning features or use of this software
     48  * must display the following acknowledgement:
     49  *	This product includes software developed by the University of
     50  *	California, Lawrence Berkeley Laboratory.
     51  *
     52  * Redistribution and use in source and binary forms, with or without
     53  * modification, are permitted provided that the following conditions
     54  * are met:
     55  * 1. Redistributions of source code must retain the above copyright
     56  *    notice, this list of conditions and the following disclaimer.
     57  * 2. Redistributions in binary form must reproduce the above copyright
     58  *    notice, this list of conditions and the following disclaimer in the
     59  *    documentation and/or other materials provided with the distribution.
     60  * 3. All advertising materials mentioning features or use of this software
     61  *    must display the following acknowledgement:
     62  *	This product includes software developed by the University of
     63  *	California, Berkeley and its contributors.
     64  * 4. Neither the name of the University nor the names of its contributors
     65  *    may be used to endorse or promote products derived from this software
     66  *    without specific prior written permission.
     67  *
     68  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     69  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     70  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     71  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     72  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     73  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     74  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     75  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     76  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     77  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     78  * SUCH DAMAGE.
     79  *
     80  *	@(#)sbusvar.h	8.1 (Berkeley) 6/11/93
     81  */
     82 
     83 #ifndef _SBUS_VAR_H_
     84 #define _SBUS_VAR_H_
     85 
     86 /*
     87  * Most devices are configured according to information kept in
     88  * the FORTH PROMs.  In particular, we extract the `name', `reg',
     89  * and `address' properties of each device attached to the mainbus;
     90  * other drives may also use this information.  The mainbus itself
     91  * (which `is' the CPU, in some sense) gets just the node, with a
     92  * fake name ("mainbus").
     93  */
     94 
     95 /*
     96  * S-bus variables.
     97  */
     98 struct sbusdev {
     99 	struct	device *sd_dev;		/* backpointer to generic */
    100 	struct	sbusdev *sd_bchain;	/* forward link in bus chain */
    101 	void	(*sd_reset) __P((struct device *));
    102 };
    103 
    104 
    105 /* Device register space description */
    106 struct sbus_reg {
    107 	u_int32_t	sbr_slot;
    108 	u_int32_t	sbr_offset;
    109 	u_int32_t	sbr_size;
    110 };
    111 
    112 /* Interrupt information */
    113 struct sbus_intr {
    114 	u_int32_t	sbi_pri;	/* priority (IPL) */
    115 	u_int32_t	sbi_vec;	/* vector (always 0?) */
    116 };
    117 
    118 /* Address translation accross busses */
    119 struct sbus_range {		/* Only used on v3 PROMs */
    120 	u_int32_t	cspace;		/* Client space */
    121 	u_int32_t	coffset;	/* Client offset */
    122 	u_int32_t	pspace;		/* Parent space */
    123 	u_int32_t	poffset;	/* Parent offset */
    124 	u_int32_t	size;		/* Size in bytes of this range */
    125 };
    126 
    127 /*
    128  * Sbus driver attach arguments.
    129  */
    130 struct sbus_attach_args {
    131 	int		sa_placeholder;	/* for obio attach args sharing */
    132 	bus_space_tag_t	sa_bustag;
    133 	bus_dma_tag_t	sa_dmatag;
    134 	char		*sa_name;	/* PROM node name */
    135 	int		sa_node;	/* PROM handle */
    136 	struct sbus_reg	*sa_reg;	/* Sbus register space for device */
    137 	int		sa_nreg;	/* Number of Sbus register spaces */
    138 #define sa_slot		sa_reg[0].sbr_slot
    139 #define sa_offset	sa_reg[0].sbr_offset
    140 #define sa_size		sa_reg[0].sbr_size
    141 
    142 	struct sbus_intr *sa_intr;	/* Sbus interrupts for device */
    143 	int		sa_nintr;	/* Number of interrupts */
    144 #define sa_pri		sa_intr[0].sbi_pri
    145 
    146 	void		**sa_promvaddrs;/* PROM-supplied virtual addresses */
    147 	int		sa_npromvaddrs;	/* Number of PROM VAs */
    148 #define sa_promvaddr	sa_promvaddrs[0]
    149 
    150 	struct bootpath *sa_bp;		/* used for locating boot device */
    151 };
    152 
    153 /* variables per Sbus */
    154 struct sbus_softc {
    155 	struct	device sc_dev;		/* base device */
    156 	bus_space_tag_t	sc_bustag;
    157 	bus_dma_tag_t	sc_dmatag;
    158 	int	sc_clockfreq;		/* clock frequency (in Hz) */
    159 	struct	sbusdev *sc_sbdev;	/* list of all children */
    160 	struct	sbus_range *sc_range;
    161 	int	sc_nrange;
    162 	int	sc_burst;		/* burst transfer sizes supported */
    163 	int	*sc_intr2ipl;		/* Interrupt level translation */
    164 	int	*sc_intr_compat;	/* `intr' property to sbus compat */
    165 
    166 	struct sysioreg* sc_sysio;	/* SBUS control registers */
    167 	u_int		sc_pagesize;
    168 	u_int		sc_dvmabase;
    169         int64_t		*sc_tsb;	/* TSB vaddr */
    170 	int		sc_tsbsize;
    171 	paddr_t		sc_ptsb;	/* TSB physaddr */
    172 	int		sc_hasiocache;
    173 	int		sc_ign;		/* Interrupt group number for this sysio */
    174 
    175 	int32_t		sc_flushpa;	/* used to flush the SBUS */
    176 	int64_t		sc_flush;
    177 };
    178 
    179 /* sbus_attach() is also used from obio.c */
    180 #if 0
    181 void	sbus_attach __P((struct sbus_softc *, char *, int, struct bootpath *,
    182 			 const char * const *));
    183 #endif
    184 int	sbus_print __P((void *, const char *));
    185 
    186 int	sbusdev_match __P((struct cfdata *, void *));
    187 void	sbus_establish __P((struct sbusdev *, struct device *));
    188 
    189 int	sbus_setup_attach_args __P((
    190 		struct sbus_softc *,
    191 		bus_space_tag_t,
    192 		bus_dma_tag_t,
    193 		int,			/*node*/
    194 		struct bootpath *,
    195 		struct sbus_attach_args *));
    196 void	sbus_destroy_attach_args __P((struct sbus_attach_args *));
    197 
    198 #define sbus_bus_map(t, b, a, s, f, v, hp) \
    199 	bus_space_map2(t, b, a, s, f, v, hp)
    200 
    201 #endif /* _SBUS_VAR_H_ */
    202