tadpmureg.h revision 1.3 1 /* $NetBSD: tadpmureg.h,v 1.3 2020/05/16 07:16:14 jdc Exp $ */
2
3 /*-
4 * Copyright (c) 2018 Michael Lorenz <macallan (at) netbsd.org>
5 * All rights reserved.
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26 * POSSIBILITY OF SUCH DAMAGE.
27 */
28
29 /* registers and commands for the PMU found in Tadpole SPARCle/Viper laptops */
30
31 #ifndef TADPMUREG_H
32 #define TADPMUREG_H
33
34 /* all values were found by looking at OF methods on the tadpmu node */
35
36 /* these registers live in the pckbc's address space */
37 #define TADPMU_CMD 0x6
38 #define TADPMU_STATUS 0x6
39 #define TADPMU_DATA 0x2
40
41 #define STATUS_HAVE_DATA 0x01 /* response from command */
42 #define STATUS_CMD_IN_PROGRESS 0x02
43 #define STATUS_INTR 0x04 /* interrupt happened, read data to ack */
44 #define STATUS_SEND_DATA 0x08 /* cmd waiting for data */
45
46 #define CMD_SET_OPMODE 0x41 /* not sure what exactly this does... */
47 #define OPMODE_UNIX 0x75 /* other than toggling the UNIX mode */
48 #define OPMODE_OF 0x67 /* bit in the GENSTAT register */
49 #define OPMODE_DBG_ON 0x64 /* Debug ON */
50 #define OPMODE_DBG_OFF 0x6E /* Debug OFF */
51 #define OPMODE_OBP 0x6F
52 #define CMD_CHRGCTL 0x42
53 #define CMD_SET_BACKLIGHT 0x43 /* apparently 0 - 1f */
54 #define CMD_SET_CPUSPEED 0x44 /* in 10MHz, so 120 == 1.2GHz */
55 #define CMD_SET_SPREADCLK 0x45
56 #define CMD_SET_FANSPEED 0x46
57 #define CMD_SET_VOLUME 0x48 /* beeper volume */
58 #define CMD_SET_DIR_CLK 0x80
59 #define CMD_WRITE 0xC0
60
61 #define CMD_READ_GENSTAT 0x10
62 #define CMD_READ_BACKLIGHT 0x11
63 #define CMD_READ_SYSTEMP 0x12 /* temperature */
64 #define CMD_READ_VOLUME 0x13
65 #define CMD_READ_VBATT 0x14 /* Voltage * 10 (e.g. 120 = 12.0v) */
66 #define CMD_READ_VERSION 0x15
67 #define CMD_READ_CPUSPEED 0x16
68 #define CMD_READ_KEYSTAT 0x17 /* Pause-A, D, N, O, R */
69 #define CMD_READ_FAN_EN 0x18 /* Fan(s): off=0x00, full=0x77 */
70 #define CMD_READ_GENSTAT2 0x19
71 #define READ_DIPSWITCH 0x1A
72
73 #define CMD_READ_FANSPEED 0x50 /* takes a parameter, returns nothing? */
74
75 #define CMD_SHUTDOWN 0x40
76 #define CMD_BEEP 0x47 /* Start/stop beep, param is freq */
77 #define CMD_READ_BMU 0x70
78 #define CMD_REFLASH 0x49
79 #define CMD_READ 0x89
80 #define CMD_WRITE 0xC0
81 #define CMD_WRITE_BMU 0xC1
82
83 /* these are according to the ROM methods
84 #define GENSTAT_DC_PRESENT 0x01
85 #define GENSTAT_DC_ENABLE 0x02
86 #define GENSTAT_BATTERY_PRESENT 0x04
87 #define GENSTAT_BATTERY_CHARGING 0x08
88 #define GENSTAT_LID_CLOSED 0x10
89 #define GENSTAT_UNIX_MODE 0x20
90 #define GENSTAT_SPREADSPECTRUM 0x40
91
92 Values of genstat (from observation)
93 0b = on battery
94 3b = battery charging
95 1f = battery full
96 1b = no battery
97 */
98 #define GENSTAT_UNIX_MODE 0x01
99 #define GENSTAT_BATTERY_PRESENT 0x04 /* only valid if DC present? */
100 #define GENSTAT_BATTERY_CHARGED 0x08
101 #define GENSTAT_DC_PRESENT 0x10
102 #define GENSTAT_BATTERY_CHARGING 0x20
103 #define GENSTAT_LID_CLOSED 0x80
104
105 #define GENSTAT_STATE_BATTERY_FULL 0x1f
106 #define GENSTAT_STATE_BATTERY_DISCHARGE 0x0b
107 #define GENSTAT_STATE_BATTERY_CHARGE 0x3b
108
109 #define GENSTAT2_DEBUG 0x01 /* PMU debug enable? */
110 #define GENSTAT2_MUTE 0x02
111
112 /* messages from interrupts */
113 #define TADPMU_INTR_BATTERY_CHARGED 0x03
114 #define TADPMU_INTR_DCPOWER 0x04
115 #define TADPMU_INTR_LID 0x05
116 #define TADPMU_INTR_POWERBUTTON 0x06
117 #define TADPMU_INTR_BATTERY_VOLT 0xcd /* Voltage change */
118 #define TADPMU_INTR_BATTERY_STATE 0xd6 /* e.g. warn -> crit */
119 /* Other observed values:
120 0xc9
121 0xcb
122 0xd2
123 */
124
125 #endif /* TADPMUREG_H */
126