xref: /src/sys/arch/sparc64/dev/zs.c

/*	$NetBSD: zs.c,v 1.4 1998/09/02 05:51:37 eeh Exp $	*/

/*-
 * Copyright (c) 1996 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Gordon W. Ross.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *        This product includes software developed by the NetBSD
 *        Foundation, Inc. and its contributors.
 * 4. Neither the name of The NetBSD Foundation nor the names of its
 *    contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*
 * Zilog Z8530 Dual UART driver (machine-dependent part)
 *
 * Runs two serial lines per chip using slave drivers.
 * Plain tty/async lines use the zs_async slave.
 * Sun keyboard/mouse uses the zs_kbd/zs_ms slaves.
 */

#include "opt_ddb.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/file.h>
#include <sys/ioctl.h>
#include <sys/kernel.h>
#include <sys/proc.h>
#include <sys/tty.h>
#include <sys/time.h>
#include <sys/syslog.h>

#include <machine/autoconf.h>
#include <machine/openfirm.h>
#include <machine/bsd_openprom.h>
#include <machine/conf.h>
#include <machine/cpu.h>
#include <machine/eeprom.h>
#include <machine/psl.h>
#include <machine/z8530var.h>

#include <dev/cons.h>
#include <dev/ic/z8530reg.h>

#include <sparc64/sparc64/vaddrs.h>
#include <sparc64/sparc64/auxreg.h>
#include <sparc64/dev/cons.h>

#include "kbd.h"	/* NKBD */
#include "zs.h" 	/* NZS */

/* Make life easier for the initialized arrays here. */
#if NZS < 3
#undef  NZS
#define NZS 3
#endif

/*
 * Some warts needed by z8530tty.c -
 * The default parity REALLY needs to be the same as the PROM uses,
 * or you can not see messages done with printf during boot-up...
 */
int zs_def_cflag = (CREAD | CS8 | HUPCL);
int zs_major = 12;

/*
 * The Sun provides a 4.9152 MHz clock to the ZS chips.
 */
#define PCLK	(9600 * 512)	/* PCLK pin input clock rate */

/*
 * Select software interrupt bit based on TTY ipl.
 */
#if PIL_TTY == 1
# define IE_ZSSOFT IE_L1
#elif PIL_TTY == 4
# define IE_ZSSOFT IE_L4
#elif PIL_TTY == 6
# define IE_ZSSOFT IE_L6
#else
# error "no suitable software interrupt bit"
#endif

#define	ZS_DELAY()		(CPU_ISSUN4C ? (0) : delay(2))

/* The layout of this is hardware-dependent (padding, order). */
struct zschan {
	volatile u_char	zc_csr;		/* ctrl,status, and indirect access */
	u_char		zc_xxx0;
	volatile u_char	zc_data;	/* data */
	u_char		zc_xxx1;
};
struct zsdevice {
	/* Yes, they are backwards. */
	struct	zschan zs_chan_b;
	struct	zschan zs_chan_a;
};

/* Saved PROM mappings */
static struct zsdevice *zsaddr[NZS];

/* Flags from cninit() */
static int zs_hwflags[NZS][2];

/* Default speed for each channel */
static int zs_defspeed[NZS][2] = {
	{ 9600, 	/* ttya */
	  9600 },	/* ttyb */
	{ 1200, 	/* keyboard */
	  1200 },	/* mouse */
	{ 9600, 	/* ttyc */
	  9600 },	/* ttyd */
};

static u_char zs_init_reg[16] = {
	0,	/* 0: CMD (reset, etc.) */
	0,	/* 1: No interrupts yet. */
	0,	/* 2: IVECT */
	ZSWR3_RX_8 | ZSWR3_RX_ENABLE,
	ZSWR4_CLK_X16 | ZSWR4_ONESB | ZSWR4_EVENP,
	ZSWR5_TX_8 | ZSWR5_TX_ENABLE,
	0,	/* 6: TXSYNC/SYNCLO */
	0,	/* 7: RXSYNC/SYNCHI */
	0,	/* 8: alias for data port */
	ZSWR9_MASTER_IE | ZSWR9_NO_VECTOR,
	0,	/*10: Misc. TX/RX control bits */
	ZSWR11_TXCLK_BAUD | ZSWR11_RXCLK_BAUD,
	14,	/*12: BAUDLO (default=9600) */
	0,	/*13: BAUDHI (default=9600) */
	ZSWR14_BAUD_ENA | ZSWR14_BAUD_FROM_PCLK,
	ZSWR15_BREAK_IE | ZSWR15_DCD_IE,
};

struct zschan *
zs_get_chan_addr(zs_unit, channel)
	int zs_unit, channel;
{
	struct zsdevice	*addr;
	struct zschan	*zc;

	if (zs_unit >= NZS)
		return (NULL);
	addr = zsaddr[zs_unit];
	if (addr == NULL)
		addr = zsaddr[zs_unit] = findzs(zs_unit);
	if (addr == NULL)
		return (NULL);
	if (channel == 0) {
		zc = &addr->zs_chan_a;
	} else {
		zc = &addr->zs_chan_b;
	}
	return (zc);
}


/****************************************************************
 * Autoconfig
 ****************************************************************/

/* Definition of the driver for autoconfig. */
static int  zs_match_sbus __P((struct device *, struct cfdata *, void *));
static int  zs_match_mainbus __P((struct device *, struct cfdata *, void *));
static int  zs_match_obio __P((struct device *, struct cfdata *, void *));
static void zs_attach_sbus __P((struct device *, struct device *, void *));
static void zs_attach_mainbus __P((struct device *, struct device *, void *));
static void zs_attach_obio __P((struct device *, struct device *, void *));

static void zs_attach __P((struct zsc_softc *, int));
static int  zs_print __P((void *, const char *name));

struct cfattach zs_ca = {
	sizeof(struct zsc_softc), zs_match_sbus, zs_attach_sbus
};

struct cfattach zs_mainbus_ca = {
	sizeof(struct zsc_softc), zs_match_mainbus, zs_attach_mainbus
};

struct cfattach zs_obio_ca = {
	sizeof(struct zsc_softc), zs_match_obio, zs_attach_obio
};

extern struct cfdriver zs_cd;

/* Interrupt handlers. */
static int zshard __P((void *));
static int zssoft __P((void *));
static struct intrhand levelsoft = { zssoft };

static int zs_get_speed __P((struct zs_chanstate *));


/*
 * Is the zs chip present?
 */
static int
zs_match_mainbus(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	struct mainbus_attach_args *ma = aux;

	if (strcmp(cf->cf_driver->cd_name, ma->ma_name) != 0)
		return (0);

	return (getpropint(ma->ma_node, "slave", -2) == cf->cf_unit);
}

static int
zs_match_sbus(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	struct sbus_attach_args *sa = aux;

	if (strcmp(cf->cf_driver->cd_name, sa->sa_name) != 0)
		return (0);

	return 1;
}

static int
zs_match_obio(parent, cf, aux)
	struct device *parent;
	struct cfdata *cf;
	void *aux;
{
	union obio_attach_args *uoba = aux;
	struct obio4_attach_args *oba;

	if (uoba->uoba_isobio4 == 0) {
		struct sbus_attach_args *sa = &uoba->uoba_sbus;

		if (strcmp(cf->cf_driver->cd_name, sa->sa_name) != 0)
			return (0);

		return (getpropint(sa->sa_node, "slave", -2) == cf->cf_unit);
	}

	oba = &uoba->uoba_oba4;
	return (bus_space_probe(oba->oba_bustag, 0, oba->oba_paddr,
			        1, 0, 0, NULL, NULL));
}

static void
zs_attach_mainbus(parent, self, aux)
	struct device *parent;
	struct device *self;
	void *aux;
{
	struct zsc_softc *zsc = (void *) self;
	struct mainbus_attach_args *ma = aux;
	int zs_unit = zsc->zsc_dev.dv_unit;

	zsc->zsc_bustag = ma->ma_bustag;
	zsc->zsc_dmatag = ma->ma_dmatag;

	/* Use the mapping setup by the Sun PROM. */
	if (zsaddr[zs_unit] == NULL)
		zsaddr[zs_unit] = findzs(zs_unit);
	if ((void*)zsaddr[zs_unit] != (void*)(long)ma->ma_address[0])
		panic("zsattach_mainbus");
	zs_attach(zsc, ma->ma_pri);
}


static void
zs_attach_sbus(parent, self, aux)
	struct device *parent;
	struct device *self;
	void *aux;
{
	struct zsc_softc *zsc = (void *) self;
	struct sbus_attach_args *sa = aux;
	int zs_unit = zsc->zsc_dev.dv_unit;

	zsc->zsc_bustag = sa->sa_bustag;
	zsc->zsc_dmatag = sa->sa_dmatag;

	/* Use the mapping setup by the Sun PROM. */
	if (zsaddr[zs_unit] == NULL)
		zsaddr[zs_unit] = findzs(zs_unit);
	zs_attach(zsc, sa->sa_pri);
}

static void
zs_attach_obio(parent, self, aux)
	struct device *parent;
	struct device *self;
	void *aux;
{
	struct zsc_softc *zsc = (void *) self;
	union obio_attach_args *uoba = aux;
	int zs_unit = zsc->zsc_dev.dv_unit;

	/* Use the mapping setup by the Sun PROM. */
	if (zsaddr[zs_unit] == NULL)
		zsaddr[zs_unit] = findzs(zs_unit);

	if (uoba->uoba_isobio4 == 0) {
		struct sbus_attach_args *sa = &uoba->uoba_sbus;
		zsc->zsc_bustag = sa->sa_bustag;
		zsc->zsc_dmatag = sa->sa_dmatag;
		zs_attach(zsc, sa->sa_pri);
	} else {
		struct obio4_attach_args *oba = &uoba->uoba_oba4;
		zsc->zsc_bustag = oba->oba_bustag;
		zsc->zsc_dmatag = oba->oba_dmatag;
		zs_attach(zsc, oba->oba_pri);
	}
}
/*
 * Attach a found zs.
 *
 * USE ROM PROPERTIES port-a-ignore-cd AND port-b-ignore-cd FOR
 * SOFT CARRIER, AND keyboard PROPERTY FOR KEYBOARD/MOUSE?
 */
static void
zs_attach(zsc, pri)
	struct zsc_softc *zsc;
	int pri;
{
	struct zsc_attach_args zsc_args;
	volatile struct zschan *zc;
	struct zs_chanstate *cs;
	int s, zs_unit, channel;
	static int didintr, prevpri;

	printf(" softpri %d\n", PIL_TTY);

	/*
	 * Initialize software state for each channel.
	 */
	zs_unit = zsc->zsc_dev.dv_unit;
	for (channel = 0; channel < 2; channel++) {
		zsc_args.channel = channel;
		zsc_args.hwflags = zs_hwflags[zs_unit][channel];
		cs = &zsc->zsc_cs_store[channel];
		zsc->zsc_cs[channel] = cs;

		cs->cs_channel = channel;
		cs->cs_private = NULL;
		cs->cs_ops = &zsops_null;
		cs->cs_brg_clk = PCLK / 16;

		zc = zs_get_chan_addr(zs_unit, channel);
		cs->cs_reg_csr  = &zc->zc_csr;
		cs->cs_reg_data = &zc->zc_data;

		bcopy(zs_init_reg, cs->cs_creg, 16);
		bcopy(zs_init_reg, cs->cs_preg, 16);

		/* XXX: Get these from the PROM properties! */
		/* XXX: See the mvme167 code.  Better. */
		if (zsc_args.hwflags & ZS_HWFLAG_CONSOLE)
			cs->cs_defspeed = zs_get_speed(cs);
		else
			cs->cs_defspeed = zs_defspeed[zs_unit][channel];
		cs->cs_defcflag = zs_def_cflag;

		/* Make these correspond to cs_defcflag (-crtscts) */
		cs->cs_rr0_dcd = ZSRR0_DCD;
		cs->cs_rr0_cts = 0;
		cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS;
		cs->cs_wr5_rts = 0;

		/*
		 * Clear the master interrupt enable.
		 * The INTENA is common to both channels,
		 * so just do it on the A channel.
		 */
		if (channel == 0) {
			zs_write_reg(cs, 9, 0);
		}

		/*
		 * Look for a child driver for this channel.
		 * The child attach will setup the hardware.
		 */
		if (!config_found(&zsc->zsc_dev, (void *)&zsc_args, zs_print)) {
			/* No sub-driver.  Just reset it. */
			u_char reset = (channel == 0) ?
				ZSWR9_A_RESET : ZSWR9_B_RESET;
			s = splzs();
			zs_write_reg(cs,  9, reset);
			splx(s);
		}
	}

	/*
	 * Now safe to install interrupt handlers.  Note the arguments
	 * to the interrupt handlers aren't used.  Note, we only do this
	 * once since both SCCs interrupt at the same level and vector.
	 */
	if (!didintr) {
		didintr = 1;
		prevpri = pri;
		bus_intr_establish(zsc->zsc_bustag, pri, 0, zshard, NULL);
		intr_establish(PIL_TTY, &levelsoft);
	} else if (pri != prevpri)
		panic("broken zs interrupt scheme");

	evcnt_attach(&zsc->zsc_dev, "intr", &zsc->zsc_intrcnt);

	/*
	 * Set the master interrupt enable and interrupt vector.
	 * (common to both channels, do it on A)
	 */
	cs = zsc->zsc_cs[0];
	s = splhigh();
	/* interrupt vector */
	zs_write_reg(cs, 2, zs_init_reg[2]);
	/* master interrupt control (enable) */
	zs_write_reg(cs, 9, zs_init_reg[9]);
	splx(s);

#if 0
	/*
	 * XXX: L1A hack - We would like to be able to break into
	 * the debugger during the rest of autoconfiguration, so
	 * lower interrupts just enough to let zs interrupts in.
	 * This is done after both zs devices are attached.
	 */
	if (zs_unit == 1) {
		printf("zs1: enabling zs interrupts\n");
		(void)splfd(); /* XXX: splzs - 1 */
	}
#endif
}

static int
zs_print(aux, name)
	void *aux;
	const char *name;
{
	struct zsc_attach_args *args = aux;

	if (name != NULL)
		printf("%s: ", name);

	if (args->channel != -1)
		printf(" channel %d", args->channel);

	return (UNCONF);
}

static volatile int zssoftpending;

/*
 * Our ZS chips all share a common, autovectored interrupt,
 * so we have to look at all of them on each interrupt.
 */
static int
zshard(arg)
	void *arg;
{
	register struct zsc_softc *zsc;
	register int unit, rr3, rval, softreq;

	rval = softreq = 0;
	for (unit = 0; unit < zs_cd.cd_ndevs; unit++) {
		zsc = zs_cd.cd_devs[unit];
		if (zsc == NULL)
			continue;
		rr3 = zsc_intr_hard(zsc);
		/* Count up the interrupts. */
		if (rr3) {
			rval |= rr3;
			zsc->zsc_intrcnt.ev_count++;
		}
		softreq |= zsc->zsc_cs[0]->cs_softreq;
		softreq |= zsc->zsc_cs[1]->cs_softreq;
	}

	/* We are at splzs here, so no need to lock. */
	if (softreq && (zssoftpending == 0)) {
		zssoftpending = IE_ZSSOFT;
#if defined(SUN4M)
		if (CPU_ISSUN4M)
			raise(0, PIL_TTY);
		else
#endif
			ienab_bis(IE_ZSSOFT);
	}
	return (rval);
}

/*
 * Similar scheme as for zshard (look at all of them)
 */
static int
zssoft(arg)
	void *arg;
{
	register struct zsc_softc *zsc;
	register int s, unit;

	/* This is not the only ISR on this IPL. */
	if (zssoftpending == 0)
		return (0);

	/*
	 * The soft intr. bit will be set by zshard only if
	 * the variable zssoftpending is zero.  The order of
	 * these next two statements prevents our clearing
	 * the soft intr bit just after zshard has set it.
	 */
	/* ienab_bic(IE_ZSSOFT); */
	zssoftpending = 0;

	/* Make sure we call the tty layer at spltty. */
	s = spltty();
	for (unit = 0; unit < zs_cd.cd_ndevs; unit++) {
		zsc = zs_cd.cd_devs[unit];
		if (zsc == NULL)
			continue;
		(void)zsc_intr_soft(zsc);
	}
	splx(s);
	return (1);
}


/*
 * Compute the current baud rate given a ZS channel.
 */
static int
zs_get_speed(cs)
	struct zs_chanstate *cs;
{
	int tconst;

	tconst = zs_read_reg(cs, 12);
	tconst |= zs_read_reg(cs, 13) << 8;
	return (TCONST_TO_BPS(cs->cs_brg_clk, tconst));
}

/*
 * MD functions for setting the baud rate and control modes.
 */
int
zs_set_speed(cs, bps)
	struct zs_chanstate *cs;
	int bps;	/* bits per second */
{
	int tconst, real_bps;

	if (bps == 0)
		return (0);

#ifdef	DIAGNOSTIC
	if (cs->cs_brg_clk == 0)
		panic("zs_set_speed");
#endif

	tconst = BPS_TO_TCONST(cs->cs_brg_clk, bps);
	if (tconst < 0)
		return (EINVAL);

	/* Convert back to make sure we can do it. */
	real_bps = TCONST_TO_BPS(cs->cs_brg_clk, tconst);

	/* XXX - Allow some tolerance here? */
	if (real_bps != bps)
		return (EINVAL);

	cs->cs_preg[12] = tconst;
	cs->cs_preg[13] = tconst >> 8;

	/* Caller will stuff the pending registers. */
	return (0);
}

int
zs_set_modes(cs, cflag)
	struct zs_chanstate *cs;
	int cflag;	/* bits per second */
{
	int s;

	/*
	 * Output hardware flow control on the chip is horrendous:
	 * if carrier detect drops, the receiver is disabled, and if
	 * CTS drops, the transmitter is stoped IN MID CHARACTER!
	 * Therefore, NEVER set the HFC bit, and instead use the
	 * status interrupt to detect CTS changes.
	 */
	s = splzs();
	if ((cflag & (CLOCAL | MDMBUF)) != 0)
		cs->cs_rr0_dcd = 0;
	else
		cs->cs_rr0_dcd = ZSRR0_DCD;
	if ((cflag & CRTSCTS) != 0) {
		cs->cs_wr5_dtr = ZSWR5_DTR;
		cs->cs_wr5_rts = ZSWR5_RTS;
		cs->cs_rr0_cts = ZSRR0_CTS;
	} else if ((cflag & CDTRCTS) != 0) {
		cs->cs_wr5_dtr = 0;
		cs->cs_wr5_rts = ZSWR5_DTR;
		cs->cs_rr0_cts = ZSRR0_CTS;
	} else if ((cflag & MDMBUF) != 0) {
		cs->cs_wr5_dtr = 0;
		cs->cs_wr5_rts = ZSWR5_DTR;
		cs->cs_rr0_cts = ZSRR0_DCD;
	} else {
		cs->cs_wr5_dtr = ZSWR5_DTR | ZSWR5_RTS;
		cs->cs_wr5_rts = 0;
		cs->cs_rr0_cts = 0;
	}
	splx(s);

	/* Caller will stuff the pending registers. */
	return (0);
}


/*
 * Read or write the chip with suitable delays.
 */

u_char
zs_read_reg(cs, reg)
	struct zs_chanstate *cs;
	u_char reg;
{
	u_char val;

	*cs->cs_reg_csr = reg;
	ZS_DELAY();
	val = *cs->cs_reg_csr;
	ZS_DELAY();
	return (val);
}

void
zs_write_reg(cs, reg, val)
	struct zs_chanstate *cs;
	u_char reg, val;
{
	*cs->cs_reg_csr = reg;
	ZS_DELAY();
	*cs->cs_reg_csr = val;
	ZS_DELAY();
}

u_char
zs_read_csr(cs)
	struct zs_chanstate *cs;
{
	register u_char val;

	val = *cs->cs_reg_csr;
	ZS_DELAY();
	return (val);
}

void  zs_write_csr(cs, val)
	struct zs_chanstate *cs;
	u_char val;
{
	*cs->cs_reg_csr = val;
	ZS_DELAY();
}

u_char zs_read_data(cs)
	struct zs_chanstate *cs;
{
	register u_char val;

	val = *cs->cs_reg_data;
	ZS_DELAY();
	return (val);
}

void  zs_write_data(cs, val)
	struct zs_chanstate *cs;
	u_char val;
{
	*cs->cs_reg_data = val;
	ZS_DELAY();
}

/****************************************************************
 * Console support functions (Sun specific!)
 * Note: this code is allowed to know about the layout of
 * the chip registers, and uses that to keep things simple.
 * XXX - I think I like the mvme167 code better. -gwr
 ****************************************************************/

extern void Debugger __P((void));
void *zs_conschan;

/*
 * Handle user request to enter kernel debugger.
 */
void
zs_abort(cs)
	struct zs_chanstate *cs;
{
	register volatile struct zschan *zc = zs_conschan;
	int rr0;

	/* Wait for end of break to avoid PROM abort. */
	/* XXX - Limit the wait? */
	do {
		rr0 = zc->zc_csr;
		ZS_DELAY();
	} while (rr0 & ZSRR0_BREAK);

#if defined(KGDB)
	zskgdb(cs);
#elif defined(DDB)
	Debugger();
#else
	printf("stopping on keyboard abort\n");
	callrom();
#endif
}

/*
 * Polled input char.
 */
int
zs_getc(arg)
	void *arg;
{
	register volatile struct zschan *zc = arg;
	register int s, c, rr0;

	s = splhigh();
	/* Wait for a character to arrive. */
	do {
		rr0 = zc->zc_csr;
		ZS_DELAY();
	} while ((rr0 & ZSRR0_RX_READY) == 0);

	c = zc->zc_data;
	ZS_DELAY();
	splx(s);

	/*
	 * This is used by the kd driver to read scan codes,
	 * so don't translate '\r' ==> '\n' here...
	 */
	return (c);
}

/*
 * Polled output char.
 */
void
zs_putc(arg, c)
	void *arg;
	int c;
{
	register volatile struct zschan *zc = arg;
	register int s, rr0;

	s = splhigh();

	/* Wait for transmitter to become ready. */
	do {
		rr0 = zc->zc_csr;
		ZS_DELAY();
	} while ((rr0 & ZSRR0_TX_READY) == 0);

	/*
	 * Send the next character.
	 * Now you'd think that this could be followed by a ZS_DELAY()
	 * just like all the other chip accesses, but it turns out that
	 * the `transmit-ready' interrupt isn't de-asserted until
	 * some period of time after the register write completes
	 * (more than a couple instructions).  So to avoid stray
	 * interrupts we put in the 2us delay regardless of cpu model.
	 */
	zc->zc_data = c;
	delay(2);

	splx(s);
}

/*****************************************************************/

static void zscninit __P((struct consdev *));
static int  zscngetc __P((dev_t));
static void zscnputc __P((dev_t, int));

/*
 * Console table shared by ttya, ttyb
 */
struct consdev consdev_tty = {
	nullcnprobe,
	zscninit,
	zscngetc,
	zscnputc,
	nullcnpollc,
};

static void
zscninit(cn)
	struct consdev *cn;
{
}

/*
 * Polled console input putchar.
 */
static int
zscngetc(dev)
	dev_t dev;
{
	return (zs_getc(zs_conschan));
}

/*
 * Polled console output putchar.
 */
static void
zscnputc(dev, c)
	dev_t dev;
	int c;
{
	zs_putc(zs_conschan, c);
}

/*****************************************************************/

static void prom_cninit __P((struct consdev *));
static int  prom_cngetc __P((dev_t));
static void prom_cnputc __P((dev_t, int));

int stdin = NULL, stdout = NULL;

/*
 * The console is set to this one initially,
 * which lets us use the PROM until consinit()
 * is called to select a real console.
 */
struct consdev consdev_prom = {
	nullcnprobe,
	prom_cninit,
	prom_cngetc,
	prom_cnputc,
	nullcnpollc,
};

/*
 * The console table pointer is statically initialized
 * to point to the PROM (output only) table, so that
 * early calls to printf will work.
 */
struct consdev *cn_tab = &consdev_prom;

void
nullcnprobe(cn)
	struct consdev *cn;
{
}

static void
prom_cninit(cn)
	struct consdev *cn;
{
}

/*
 * PROM console input putchar.
 * (dummy - this is output only)
 */
static int
prom_cngetc(dev)
	dev_t dev;
{
	return (0);
}

/*
 * PROM console output putchar.
 */
static void
prom_cnputc(dev, c)
	dev_t dev;
	int c;
{
	int s;
	char c0 = (c & 0x7f);

	if (!stdout) {
		int node = OF_finddevice("/chosen");
		OF_getprop(node, "stdout",  &stdout, sizeof(stdout));
	}

	s = splhigh();
	OF_write(stdout, &c0, 1);
	splx(s);
}

/*****************************************************************/

extern struct consdev consdev_kd;

static char *prom_inSrc_name[] = {
	"keyboard/display",
	"ttya", "ttyb",
	"ttyc", "ttyd" };

/*
 * This function replaces sys/dev/cninit.c
 * Determine which device is the console using
 * the PROM "input source" and "output sink".
 */
void
consinit()
{
	struct zschan *zc;
	struct consdev *cn;
	int channel, zs_unit, zstty_unit;
	int inSource, outSink;
	register int node;
	char buffer[128];
	register char *cp;
	extern int fbnode;

prom_printf("consinit()\r\n");
	if (cn_tab != &consdev_prom) return;

	inSource = outSink = -1;

	prom_printf("setting up stdin\r\n");
	node = OF_finddevice("/chosen");
	OF_getprop(node, "stdin",  &stdin, sizeof(stdin));
	prom_printf("stdin instance = %x\r\n", stdin);

	node = OF_instance_to_package(stdin);
	prom_printf("stdin package = %x\r\n", node);
	if (OF_getproplen(node,"keyboard") >= 0) {
		inSource = PROMDEV_KBD;
		goto setup_output;
	}
	if (strcmp(getpropstring(node,"device_type"),"serial") != 0) {
		/* not a serial, not keyboard. what is it?!? */
		inSource = -1;
		goto setup_output;
	}
	/*
	 * At this point we assume the device path is in the form
	 *   ....device@x,y:a for ttya and ...device@x,y:b for ttyb.
	 * If it isn't, we defer to the ROM
	 */
	if(OF_instance_to_path(stdin, buffer, sizeof(buffer)) <= 0) {
		printf("consinit: bogus stdin path.\n");
		goto setup_output;
	}
	cp = buffer;
	while (*cp)
		cp++;
	cp -= 2;
#ifdef DEBUG
	if (cp < buffer)
		panic("consinit: bad stdin path %s",buffer);
#endif
	/* XXX: only allows tty's a->z, assumes PROMDEV_TTYx contig */
	if (cp[0]==':' && cp[1] >= 'a' && cp[1] <= 'z')
		inSource = PROMDEV_TTYA + (cp[1] - 'a');
	/* else use rom */
setup_output:
	prom_printf("setting up stdout\r\n");
	node = OF_finddevice("/chosen");
	OF_getprop(node, "stdout", &stdout, sizeof(stdout));

	prom_printf("stdout instance = %x\r\n", stdout);

	node = OF_instance_to_package(stdout);
	prom_printf("stdout package = %x\r\n", node);
	if (strcmp(getpropstring(node,"device_type"),"display") == 0) {
		/* frame buffer output */
		outSink = PROMDEV_SCREEN;
		fbnode = node;
	} else if (strcmp(getpropstring(node,"device_type"), "serial")
		   != 0) {
		/* not screen, not serial. Whatzit? */
		outSink = -1;
	} else { /* serial console. which? */
		/*
		 * At this point we assume the device path is in the
		 * form:
		 * ....device@x,y:a for ttya, etc.
		 * If it isn't, we defer to the ROM
		 */
		if(OF_instance_to_path(stdout, buffer, sizeof(buffer)) <= 0) {
			printf("consinit: bogus stdin path.\n");
			goto setup_output;
		}
		cp = buffer;
		while (*cp)
			cp++;
		cp -= 2;
#ifdef DEBUG
		if (cp < buffer)
			panic("consinit: bad stdout path %s",buffer);
#endif
		/* XXX: only allows tty's a->z, assumes PROMDEV_TTYx contig */
		if (cp[0]==':' && cp[1] >= 'a' && cp[1] <= 'z')
			outSink = PROMDEV_TTYA + (cp[1] - 'a');
		else outSink = -1;
	}
#if 0
setup_console:
#endif

	if (inSource != outSink) {
		printf("cninit: mismatched PROM output selector\n");
	}

	switch (inSource) {
	default:
		printf("cninit: invalid inSource=%d\n", inSource);
		callrom();
		inSource = PROMDEV_KBD;
		/* fall through */

	case 0:	/* keyboard/display */
#if NKBD > 0
		zs_unit = 1;	/* XXX - config info! */
		channel = 0;
		cn = &consdev_kd;
		/* Set cn_dev, cn_pri in kd.c */
		break;
#else	/* NKBD */
		printf("cninit: kdb/display not configured\n");
		callrom();
		inSource = PROMDEV_TTYA;
		/* fall through */
#endif	/* NKBD */

	case PROMDEV_TTYA:
	case PROMDEV_TTYB:
		zstty_unit = inSource - PROMDEV_TTYA;
		zs_unit = 0;	/* XXX - config info! */
		channel = zstty_unit & 1;
		cn = &consdev_tty;
		cn->cn_dev = makedev(zs_major, zstty_unit);
		cn->cn_pri = CN_REMOTE;
		break;

	}
	/* Now that inSource has been validated, print it. */
	printf("console is %s\n", prom_inSrc_name[inSource]);

	zc = zs_get_chan_addr(zs_unit, channel);
	if (zc == NULL) {
		printf("cninit: zs not mapped.\n");
		return;
	}
	zs_conschan = zc;
	zs_hwflags[zs_unit][channel] = ZS_HWFLAG_CONSOLE;
	cn_tab = cn;
	(*cn->cn_init)(cn);
#ifdef	KGDB
	zs_kgdb_init();
#endif
}