GENERIC revision 1.100
1# $NetBSD: GENERIC,v 1.100 2018/02/10 07:59:54 maxv Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun2 (2/120, 2/170, 2/50, ...) 22# Supports root on: ie0, sd*, ... 23 24include "arch/sun2/conf/std.sun2" 25 26#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.100 $" 29 30makeoptions COPTS="-Os" # optimize for size 31 32# Machines to be supported by this kernel 33#options FPU_EMULATE 34 35# Needs to be set per system. i.e change these as you see fit 36maxusers 4 37 38# Standard system options 39options KTRACE # system call tracing 40options SYSVMSG # System V message queues 41options SYSVSEM # System V semaphores 42options SYSVSHM # System V shared memory 43#options INSECURE # disable kernel security level 44#options USERCONF # userconf(4) support 45#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46#options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48# Alternate buffer queue strategies for better responsiveness under high 49# disk I/O load. 50#options BUFQ_READPRIO 51#options BUFQ_PRIOCSCAN 52 53# Which kernel debugger? Uncomment either this: 54options DDB 55# ... or these for KGDB (gdb remote target) 56#makeoptions DEBUG="-g" # debugging symbols for gdb 57#options KGDB 58#options KGDB_DEV=0x0C00 # ttya=0C00 ttyb=0C01 59 60# Other debugging options 61#options DDB_HISTORY_SIZE=100 # enable history editing in DDB 62#options DEBUG # kernel debugging code 63#options DIAGNOSTIC # extra kernel sanity checking 64#options PMAP_DEBUG 65#options SCSIDEBUG 66#options SCSIVERBOSE # Verbose SCSI errors 67 68# Compatibility options 69include "conf/compat_netbsd16.config" 70#options COMPAT_SUNOS # can run SunOS 4.1.1 executables 71#options COMPAT_AOUT_M68K # support for NetBSD a.out executables 72#options EXEC_AOUT # support for a.out executables 73 74# Filesystem options 75file-system FFS # Berkeley Fast Filesystem 76file-system NFS # Sun NFS client support 77file-system CD9660 # ISO 9660 + Rock Ridge file system 78#file-system FDESC # /dev/fd/* 79file-system KERNFS # /kern 80file-system NULLFS # loopback file system 81#file-system OVERLAY # overlay file system 82#file-system PROCFS # /proc 83#file-system UNION # union file system 84file-system MFS # memory-based filesystem 85file-system PTYFS # /dev/pts/N support 86#file-system TMPFS # Efficient memory file-system 87#file-system UDF # experimental - OSTA UDF CD/DVD file-system 88 89#options NFSSERVER # nfs server support 90#options QUOTA # legacy UFS quotas 91#options QUOTA2 # new, in-filesystem UFS quotas 92#options FFS_EI # FFS Endian Independent support 93#options WAPBL # File system journaling support 94#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 95#options NFS_V2_ONLY # Exclude NFS3 code to save space 96options FFS_NO_SNAPSHOT # No FFS snapshot support 97#options UFS_EXTATTR # Extended attribute support for UFS1 98 99# Networking options 100options INET # IP protocol stack support 101#options INET6 # IPV6 102#options IPSEC # IP security 103#options IPSEC_DEBUG # debug for IP security 104#options GATEWAY # IP packet forwarding 105#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 106 107#options ALTQ # Manipulate network interfaces' output queues 108#options ALTQ_BLUE # Stochastic Fair Blue 109#options ALTQ_CBQ # Class-Based Queueing 110#options ALTQ_CDNR # Diffserv Traffic Conditioner 111#options ALTQ_FIFOQ # First-In First-Out Queue 112#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 113#options ALTQ_HFSC # Hierarchical Fair Service Curve 114#options ALTQ_LOCALQ # Local queueing discipline 115#options ALTQ_PRIQ # Priority Queueing 116#options ALTQ_RED # Random Early Detection 117#options ALTQ_RIO # RED with IN/OUT 118#options ALTQ_WFQ # Weighted Fair Queueing 119 120# Work-around for root on slow servers (insurance...) 121options NFS_BOOT_RWSIZE=1024 122options NFS_BOOT_BOOTPARAM 123 124config netbsd root on ? type ? 125 126#### Main bus. 127mainbus0 at root 128 129#### Bus types. 130 131obio0 at mainbus? # all Sun-2 132obmem0 at mainbus? # all Sun-2 133mbmem0 at mainbus? # 2/120, 2/170 134mbio0 at mainbus? # 2/120, 2/170 135sun68kvme0 at mainbus? # 2/50, 2/130, 2/160 136vme0 at sun68kvme0 # mi VME attachment 137 138#### Standard system devices. 139 140## The AM9513 clock chip. 141clock0 at obio0 addr 0x002800 # 2/120, 2/170 142clock0 at obio0 addr 0x7f2800 # 2/50, 2/130, 2/160 143 144## The MM58167 time-of-day chip. 145tod0 at obio0 addr 0x003800 # 2/120, 2/170 146tod0 at vme0 addr 0x200800 # 2/50, 2/130, 2/160 147 148#### Serial port configuration. 149 150## Zilog 8530 serial chips. Each has two channels. 151## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 152## zs0 is REQUIRED to use KGDB. 153zs0 at obio0 addr 0x002000 # 2/120, 2/170 154zs0 at obio0 addr 0x7f2000 # 2/50 155zs1 at obmem0 addr 0x780000 # 2/120, 2/170 156zs1 at obio0 addr 0x7f1800 # 2/50 157zs2 at mbmem0 addr 0x080800 # 2/120, 2/170 (first sc SCSI) 158zs3 at mbmem0 addr 0x081000 # 2/120, 2/170 (first sc SCSI) 159zs4 at mbmem0 addr 0x084800 # 2/120, 2/170 (second sc SCSI) 160zs5 at mbmem0 addr 0x085000 # 2/120, 2/170 (second sc SCSI) 161zstty* at zs? channel ? # ttya 162kbd0 at zstty? # keyboard 163ms0 at zstty? # mouse 164 165#### Disk controllers and disks. 166 167## PAL+logic-based "Sun SCSI 2" Multibus/VME SCSI controller. 168## This driver has several flags which may be enabled using 169## the "flags" directive. Valid flags are: 170## 171## 0x0ff Set (1<<target) to disable parity checking 172## 0x100 Set this bit to disable DMA interrupts (poll) 173## 0x200 Set this bit to disable DMA entirely (use PIO) 174## 175## For example: "flags 0x10f" would disable DMA interrupts, 176## and disable parity for targets 0-3 177 178sc0 at mbmem0 addr 0x80000 ipl 2 flags 0xff 179sc0 at vme0 addr 0x200000 irq 2 vect 0x40 flags 0xff 180sc1 at mbmem0 addr 0x84000 ipl 2 flags 0xff 181 182## NCR5380-based "Sun SCSI 3" VME SCSI controller. 183## This driver has several flags which may be enabled by OR'ing 184## the values and using the "flags" directive. 185## Valid flags are: 186## 187## 0x01 Use DMA (may be polled) 188## 0x02 Use DMA completion interrupts 189## 0x04 Allow disconnect/reselect 190## 191## E.g. the following would enable DMA, interrupts, and reselect: 192## si0 at vme0 addr 0x200000 ipl 3 vect 0x40 flags 0x07 193## 194## By default, DMA is enabled in the driver. 195 196si0 at vme0 addr 0x200000 irq 2 vect 0x40 197 198## These entries find devices on all SCSI busses and assign 199## unit numbers dynamically. 200scsibus* at sc? 201scsibus* at si? 202sd* at scsibus? target ? lun ? # SCSI disks 203st* at scsibus? target ? lun ? # SCSI tapes 204cd* at scsibus? target ? lun ? # SCSI CD-ROMs 205#ch* at scsibus? target ? lun ? # SCSI changer devices 206#ss* at scsibus? target ? lun ? # SCSI scanners 207#ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 208#uk* at scsibus? target ? lun ? # unknown SCSI 209 210# support old SCSI devices that don't understand the INQUIRY command 211options SCSI_OLD_NOINQUIRY 212 213## Xylogics 450 or 451 Multibus/VME SMD disk controllers and disks. 214#xyc0 at mbio0 addr 0xee40 ipl 2 215#xyc0 at vme0 addr 0xee40 irq 2 vect 0x48 216#xyc1 at mbio0 addr 0xee48 ipl 2 217#xyc1 at vme0 addr 0xee48 irq 2 vect 0x49 218#xy* at xyc? drive ? 219 220# 221# accept filters 222#pseudo-device accf_data # "dataready" accept filter 223#pseudo-device accf_http # "httpready" accept filter 224 225## Memory-disk device. 226pseudo-device md 227 228#### Network interfaces. 229 230## Intel Ethernet (onboard, or Multibus/VME) 231ie0 at obio0 addr 0x7f0800 ipl 3 # 2/50 232ie0 at mbmem0 addr 0x88000 ipl 3 233ie1 at mbmem0 addr 0x8c000 ipl 3 234## VME: the first [addr,len] pair specifies the device registers; 235## the second pair specifies the on-board memory buffer 236ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 237 238## 3Com Ethernet (Multibus only) 239ec0 at mbmem0 addr 0xe0000 ipl 3 240ec1 at mbmem0 addr 0xe2000 ipl 3 241# limit NFS R/W size for poor ec(4) interfaces 242options NFS_RSIZE=1024,NFS_WSIZE=1024 243 244## Frame buffers. 245 246## Sun "bwtwo" black and white framebuffer. 247bwtwo0 at obmem0 addr 0x700000 # 2/120, 2/170 248bwtwo0 at obio0 addr 0x0 # 2/50 249 250## PROM console driver -- if all else fails 251pcons0 at mainbus0 # PROM console 252 253#### Miscellaneous. 254pseudo-device loop # network loopback 255#pseudo-device bpfilter # packet filter 256#pseudo-device carp # Common Address Redundancy Protocol 257#pseudo-device bridge # simple inter-network bridging 258#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 259#pseudo-device sl # CSLIP 260#pseudo-device ppp # PPP 261#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 262#pseudo-device tun # network tunneling over tty 263#pseudo-device tap # virtual Ethernet 264#pseudo-device gre # generic L3 over IP tunnel 265#pseudo-device ipfilter # ip filter 266#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 267#pseudo-device faith # IPv[46] tcp relay translation i/f 268#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 269 270pseudo-device pty # pseudo-terminals 271#pseudo-device vnd # paging to files 272#options VND_COMPRESSION # compressed vnd(4) 273#pseudo-device ccd # concatenated disks 274#pseudo-device cgd # cryptographic disk devices 275#pseudo-device raid # RAIDframe disk driver 276#options RAID_AUTOCONFIG # auto-configuration of RAID components 277# Options to enable various other RAIDframe RAID types. 278# options RF_INCLUDE_EVENODD=1 279# options RF_INCLUDE_RAID5_RS=1 280# options RF_INCLUDE_PARITYLOGGING=1 281# options RF_INCLUDE_CHAINDECLUSTER=1 282# options RF_INCLUDE_INTERDECLUSTER=1 283# options RF_INCLUDE_PARITY_DECLUSTERING=1 284# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 285#pseudo-device fss # file system snapshot device 286#pseudo-device clockctl # user control of clock subsystem 287pseudo-device ksyms # /dev/ksyms 288#pseudo-device pf # PF packet filter 289#pseudo-device pflog # PF log if 290 291# Veriexec 292# 293# a pseudo device needed for veriexec 294#pseudo-device veriexec 295# 296# Uncomment the fingerprint methods below that are desired. Note that 297# removing fingerprint methods will have almost no impact on the kernel 298# code size. 299# 300#options VERIFIED_EXEC_FP_SHA256 301#options VERIFIED_EXEC_FP_SHA384 302#options VERIFIED_EXEC_FP_SHA512 303