GENERIC revision 1.90
1 # $NetBSD: GENERIC,v 1.90 2014/07/26 17:32:07 tsutsui Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 # Supports Sun2 (2/120, 2/170, 2/50, ...) 22 # Supports root on: ie0, sd*, ... 23 24 include "arch/sun2/conf/std.sun2" 25 26 #options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28 #ident "GENERIC-$Revision: 1.90 $" 29 30 makeoptions COPTS="-Os" # optimize for size 31 32 # Machines to be supported by this kernel 33 #options FPU_EMULATE 34 35 # Needs to be set per system. i.e change these as you see fit 36 maxusers 4 37 38 # Standard system options 39 options KTRACE # system call tracing 40 options SYSVMSG # System V message queues 41 options SYSVSEM # System V semaphores 42 options SYSVSHM # System V shared memory 43 #options INSECURE # disable kernel security level 44 #options USERCONF # userconf(4) support 45 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46 #options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48 # Enable experimental buffer queue strategy for better responsiveness under 49 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 50 #options BUFQ_READPRIO 51 #options BUFQ_PRIOCSCAN 52 53 # Which kernel debugger? Uncomment either this: 54 options DDB 55 # ... or these for KGDB (gdb remote target) 56 #makeoptions DEBUG="-g" # debugging symbols for gdb 57 #options KGDB 58 #options KGDB_DEV=0x0C00 # ttya=0C00 ttyb=0C01 59 60 # Other debugging options 61 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 62 #options DEBUG # kernel debugging code 63 #options DIAGNOSTIC # extra kernel sanity checking 64 #options KMEMSTATS # kernel memory statistics (vmstat -m) 65 #options PMAP_DEBUG 66 #options SCSIDEBUG 67 #options SCSIVERBOSE # Verbose SCSI errors 68 69 # Compatibility options 70 #options COMPAT_SUNOS # can run SunOS 4.1.1 executables 71 #options COMPAT_43 # and 4.3BSD and ... 72 options COMPAT_16 # NetBSD 1.6 73 options COMPAT_20 # NetBSD 2.0 74 options COMPAT_30 # NetBSD 3.0 75 options COMPAT_40 # NetBSD 4.0 compatibility. 76 options COMPAT_50 # NetBSD 5.0 compatibility. 77 options COMPAT_60 # NetBSD 6.0 compatibility. 78 #options COMPAT_AOUT_M68K # support for NetBSD a.out executables 79 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 80 #options EXEC_AOUT # support for a.out executables 81 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 82 83 # Filesystem options 84 file-system FFS # Berkeley Fast Filesystem 85 file-system NFS # Sun NFS client support 86 file-system CD9660 # ISO 9660 + Rock Ridge file system 87 #file-system FDESC # /dev/fd/* 88 file-system KERNFS # /kern 89 file-system NULLFS # loopback file system 90 #file-system OVERLAY # overlay file system 91 #file-system PROCFS # /proc 92 #file-system UNION # union file system 93 file-system MFS # memory-based filesystem 94 file-system PTYFS # /dev/pts/N support 95 #file-system TMPFS # Efficient memory file-system 96 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 97 98 #options NFSSERVER # nfs server support 99 #options QUOTA # legacy UFS quotas 100 #options QUOTA2 # new, in-filesystem UFS quotas 101 #options FFS_EI # FFS Endian Independent support 102 #options WAPBL # File system journaling support 103 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 104 #options NFS_V2_ONLY # Exclude NFS3 code to save space 105 options FFS_NO_SNAPSHOT # No FFS snapshot support 106 107 # Networking options 108 options INET # IP protocol stack support 109 #options INET6 # IPV6 110 #options IPSEC # IP security 111 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 112 #options IPSEC_DEBUG # debug for IP security 113 #options GATEWAY # IP packet forwarding 114 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 115 116 #options ALTQ # Manipulate network interfaces' output queues 117 #options ALTQ_BLUE # Stochastic Fair Blue 118 #options ALTQ_CBQ # Class-Based Queueing 119 #options ALTQ_CDNR # Diffserv Traffic Conditioner 120 #options ALTQ_FIFOQ # First-In First-Out Queue 121 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 122 #options ALTQ_HFSC # Hierarchical Fair Service Curve 123 #options ALTQ_LOCALQ # Local queueing discipline 124 #options ALTQ_PRIQ # Priority Queueing 125 #options ALTQ_RED # Random Early Detection 126 #options ALTQ_RIO # RED with IN/OUT 127 #options ALTQ_WFQ # Weighted Fair Queueing 128 129 # Work-around for root on slow servers (insurance...) 130 options NFS_BOOT_RWSIZE=1024 131 options NFS_BOOT_BOOTPARAM 132 133 config netbsd root on ? type ? 134 135 #### Main bus. 136 mainbus0 at root 137 138 #### Bus types. 139 140 obio0 at mainbus? # all Sun-2 141 obmem0 at mainbus? # all Sun-2 142 mbmem0 at mainbus? # 2/120, 2/170 143 mbio0 at mainbus? # 2/120, 2/170 144 sun68kvme0 at mainbus? # 2/50, 2/130, 2/160 145 vme0 at sun68kvme0 # mi VME attachment 146 147 #### Standard system devices. 148 149 ## The AM9513 clock chip. 150 clock0 at obio0 addr 0x002800 # 2/120, 2/170 151 clock0 at obio0 addr 0x7f2800 # 2/50, 2/130, 2/160 152 153 ## The MM58167 time-of-day chip. 154 tod0 at obio0 addr 0x003800 # 2/120, 2/170 155 tod0 at vme0 addr 0x200800 # 2/50, 2/130, 2/160 156 157 #### Serial port configuration. 158 159 ## Zilog 8530 serial chips. Each has two channels. 160 ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 161 ## zs0 is REQUIRED to use KGDB. 162 zs0 at obio0 addr 0x002000 # 2/120, 2/170 163 zs0 at obio0 addr 0x7f2000 # 2/50 164 zs1 at obmem0 addr 0x780000 # 2/120, 2/170 165 zs1 at obio0 addr 0x7f1800 # 2/50 166 zs2 at mbmem0 addr 0x080800 # 2/120, 2/170 (first sc SCSI) 167 zs3 at mbmem0 addr 0x081000 # 2/120, 2/170 (first sc SCSI) 168 zs4 at mbmem0 addr 0x084800 # 2/120, 2/170 (second sc SCSI) 169 zs5 at mbmem0 addr 0x085000 # 2/120, 2/170 (second sc SCSI) 170 zstty* at zs? channel ? # ttya 171 kbd0 at zstty? # keyboard 172 ms0 at zstty? # mouse 173 174 #### Disk controllers and disks. 175 176 ## PAL+logic-based "Sun SCSI 2" Multibus/VME SCSI controller. 177 ## This driver has several flags which may be enabled using 178 ## the "flags" directive. Valid flags are: 179 ## 180 ## 0x0ff Set (1<<target) to disable parity checking 181 ## 0x100 Set this bit to disable DMA interrupts (poll) 182 ## 0x200 Set this bit to disable DMA entirely (use PIO) 183 ## 184 ## For example: "flags 0x10f" would disable DMA interrupts, 185 ## and disable parity for targets 0-3 186 187 sc0 at mbmem0 addr 0x80000 ipl 2 flags 0xff 188 sc0 at vme0 addr 0x200000 irq 2 vect 0x40 flags 0xff 189 sc1 at mbmem0 addr 0x84000 ipl 2 flags 0xff 190 191 ## NCR5380-based "Sun SCSI 3" VME SCSI controller. 192 ## This driver has several flags which may be enabled by OR'ing 193 ## the values and using the "flags" directive. 194 ## Valid flags are: 195 ## 196 ## 0x01 Use DMA (may be polled) 197 ## 0x02 Use DMA completion interrupts 198 ## 0x04 Allow disconnect/reselect 199 ## 200 ## E.g. the following would enable DMA, interrupts, and reselect: 201 ## si0 at vme0 addr 0x200000 ipl 3 vect 0x40 flags 0x07 202 ## 203 ## By default, DMA is enabled in the driver. 204 205 si0 at vme0 addr 0x200000 irq 2 vect 0x40 206 207 ## These entries find devices on all SCSI busses and assign 208 ## unit numbers dynamically. 209 scsibus* at sc? 210 scsibus* at si? 211 sd* at scsibus? target ? lun ? # SCSI disks 212 st* at scsibus? target ? lun ? # SCSI tapes 213 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 214 #ch* at scsibus? target ? lun ? # SCSI changer devices 215 #ss* at scsibus? target ? lun ? # SCSI scanners 216 #ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 217 #uk* at scsibus? target ? lun ? # unknown SCSI 218 219 # support old SCSI devices that don't understand the INQUIRY command 220 options SCSI_OLD_NOINQUIRY 221 222 ## Xylogics 450 or 451 Multibus/VME SMD disk controllers and disks. 223 #xyc0 at mbio0 addr 0xee40 ipl 2 224 #xyc0 at vme0 addr 0xee40 irq 2 vect 0x48 225 #xyc1 at mbio0 addr 0xee48 ipl 2 226 #xyc1 at vme0 addr 0xee48 irq 2 vect 0x49 227 #xy* at xyc? drive ? 228 229 # 230 # accept filters 231 #pseudo-device accf_data # "dataready" accept filter 232 #pseudo-device accf_http # "httpready" accept filter 233 234 ## Memory-disk device. 235 pseudo-device md 236 237 #### Network interfaces. 238 239 ## Intel Ethernet (onboard, or Multibus/VME) 240 ie0 at obio0 addr 0x7f0800 ipl 3 # 2/50 241 ie0 at mbmem0 addr 0x88000 ipl 3 242 ie1 at mbmem0 addr 0x8c000 ipl 3 243 ## VME: the first [addr,len] pair specifies the device registers; 244 ## the second pair specifies the on-board memory buffer 245 ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 246 247 ## 3Com Ethernet (Multibus only) 248 ec0 at mbmem0 addr 0xe0000 ipl 3 249 ec1 at mbmem0 addr 0xe2000 ipl 3 250 # limit NFS R/W size for poor ec(4) interfaces 251 options NFS_RSIZE=1024,NFS_WSIZE=1024 252 253 ## Frame buffers. 254 255 ## Sun "bwtwo" black and white framebuffer. 256 bwtwo0 at obmem0 addr 0x700000 # 2/120, 2/170 257 bwtwo0 at obio0 addr 0x0 # 2/50 258 259 ## PROM console driver -- if all else fails 260 pcons0 at mainbus0 # PROM console 261 262 #### Miscellaneous. 263 pseudo-device loop # network loopback 264 #pseudo-device bpfilter # packet filter 265 #pseudo-device carp # Common Address Redundancy Protocol 266 #pseudo-device bridge # simple inter-network bridging 267 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 268 #pseudo-device sl # CSLIP 269 #pseudo-device ppp # PPP 270 #pseudo-device pppoe # PPP over Ethernet (RFC 2516) 271 #pseudo-device tun # network tunneling over tty 272 #pseudo-device tap # virtual Ethernet 273 #pseudo-device gre # generic L3 over IP tunnel 274 #pseudo-device ipfilter # ip filter 275 #pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 276 #pseudo-device faith # IPv[46] tcp relay translation i/f 277 #pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 278 279 pseudo-device pty # pseudo-terminals 280 #pseudo-device vnd # paging to files 281 #options VND_COMPRESSION # compressed vnd(4) 282 #pseudo-device ccd # concatenated disks 283 #pseudo-device cgd # cryptographic disk devices 284 #pseudo-device raid # RAIDframe disk driver 285 #options RAID_AUTOCONFIG # auto-configuration of RAID components 286 # Options to enable various other RAIDframe RAID types. 287 # options RF_INCLUDE_EVENODD=1 288 # options RF_INCLUDE_RAID5_RS=1 289 # options RF_INCLUDE_PARITYLOGGING=1 290 # options RF_INCLUDE_CHAINDECLUSTER=1 291 # options RF_INCLUDE_INTERDECLUSTER=1 292 # options RF_INCLUDE_PARITY_DECLUSTERING=1 293 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 294 #pseudo-device fss # file system snapshot device 295 #pseudo-device clockctl # user control of clock subsystem 296 pseudo-device ksyms # /dev/ksyms 297 #pseudo-device pf # PF packet filter 298 #pseudo-device pflog # PF log if 299 300 # Veriexec 301 # 302 # a pseudo device needed for veriexec 303 #pseudo-device veriexec 304 # 305 # Uncomment the fingerprint methods below that are desired. Note that 306 # removing fingerprint methods will have almost no impact on the kernel 307 # code size. 308 # 309 #options VERIFIED_EXEC_FP_RMD160 310 #options VERIFIED_EXEC_FP_SHA256 311 #options VERIFIED_EXEC_FP_SHA384 312 #options VERIFIED_EXEC_FP_SHA512 313 #options VERIFIED_EXEC_FP_SHA1 314 #options VERIFIED_EXEC_FP_MD5 315
Indexes created Sat Oct 11 19:10:01 GMT 2025