if_ec.c revision 1.19
1 /* $NetBSD: if_ec.c,v 1.19 2011/11/19 22:51:21 tls Exp $ */ 2 3 /* 4 * Copyright (c) 2001 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Matthew Fredette. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 29 * POSSIBILITY OF SUCH DAMAGE. 30 */ 31 32 /* 33 * 3Com 3C400 device driver 34 */ 35 36 #include <sys/cdefs.h> 37 __KERNEL_RCSID(0, "$NetBSD: if_ec.c,v 1.19 2011/11/19 22:51:21 tls Exp $"); 38 39 #include "opt_inet.h" 40 #include "opt_ns.h" 41 #include "rnd.h" 42 43 #include <sys/param.h> 44 #include <sys/systm.h> 45 #include <sys/errno.h> 46 #include <sys/ioctl.h> 47 #include <sys/mbuf.h> 48 #include <sys/socket.h> 49 #include <sys/syslog.h> 50 #include <sys/device.h> 51 #include <sys/endian.h> 52 #if NRND > 0 53 #include <sys/rnd.h> 54 #endif 55 56 #include <net/if.h> 57 #include <net/if_dl.h> 58 #include <net/if_types.h> 59 60 #include <net/if_ether.h> 61 #include <net/if_media.h> 62 63 #ifdef INET 64 #include <netinet/in.h> 65 #include <netinet/in_systm.h> 66 #include <netinet/in_var.h> 67 #include <netinet/ip.h> 68 #include <netinet/if_inarp.h> 69 #endif 70 71 #ifdef NS 72 #include <netns/ns.h> 73 #include <netns/ns_if.h> 74 #endif 75 76 #include <net/bpf.h> 77 #include <net/bpfdesc.h> 78 79 #include <machine/cpu.h> 80 #include <machine/autoconf.h> 81 #include <machine/idprom.h> 82 #include <machine/bus.h> 83 #include <machine/intr.h> 84 85 #include <sun2/dev/if_ecreg.h> 86 87 /* 88 * Interface softc. 89 */ 90 struct ec_softc { 91 device_t sc_dev; 92 void *sc_ih; 93 94 struct ethercom sc_ethercom; /* ethernet common */ 95 struct ifmedia sc_media; /* our supported media */ 96 97 bus_space_tag_t sc_iot; /* bus space tag */ 98 bus_space_handle_t sc_ioh; /* bus space handle */ 99 100 u_char sc_jammed; /* nonzero if the net is jammed */ 101 u_char sc_colliding; /* nonzero if the net is colliding */ 102 uint32_t sc_backoff_seed; /* seed for the backoff PRNG */ 103 104 #if NRND > 0 105 krndsource_t rnd_source; 106 #endif 107 }; 108 109 /* Macros to read and write the CSR. */ 110 #define ECREG_CSR_RD bus_space_read_2(sc->sc_iot, sc->sc_ioh, ECREG_CSR) 111 #define ECREG_CSR_WR(val) bus_space_write_2(sc->sc_iot, sc->sc_ioh, ECREG_CSR, val) 112 113 /* After this many collisions, the packet is dropped. */ 114 #define EC_COLLISIONS_JAMMED 16 115 116 /* 117 * Various constants used in the backoff pseudorandom 118 * number generator. 119 */ 120 #define EC_BACKOFF_PRNG_COLL_MAX 10 121 #define EC_BACKOFF_PRNG_MUL 1103515245 122 #define EC_BACKOFF_PRNG_ADD 12345 123 #define EC_BACKOFF_PRNG_MASK 0x7fffffff 124 125 /* 126 * Prototypes 127 */ 128 int ec_intr(void *); 129 void ec_reset(struct ifnet *); 130 int ec_init(struct ifnet *); 131 int ec_ioctl(struct ifnet *, u_long, void *); 132 void ec_watchdog(struct ifnet *); 133 void ec_start(struct ifnet *); 134 135 void ec_recv(struct ec_softc *, int); 136 void ec_coll(struct ec_softc *); 137 void ec_copyin(struct ec_softc *, void *, int, size_t); 138 void ec_copyout(struct ec_softc *, const void *, int, size_t); 139 140 int ec_mediachange(struct ifnet *); 141 void ec_mediastatus(struct ifnet *, struct ifmediareq *); 142 143 int ec_match(device_t, cfdata_t, void *); 144 void ec_attach(device_t, device_t, void *); 145 146 CFATTACH_DECL_NEW(ec, sizeof(struct ec_softc), 147 ec_match, ec_attach, NULL, NULL); 148 149 /* 150 * Copy board memory to kernel. 151 */ 152 void 153 ec_copyin(struct ec_softc *sc, void *p, int offset, size_t size) 154 { 155 156 bus_space_copyin(sc->sc_iot, sc->sc_ioh, offset, p, size); 157 } 158 159 /* 160 * Copy from kernel space to board memory. 161 */ 162 void 163 ec_copyout(struct ec_softc *sc, const void *p, int offset, size_t size) 164 { 165 166 bus_space_copyout(sc->sc_iot, sc->sc_ioh, offset, p, size); 167 } 168 169 int 170 ec_match(device_t parent, cfdata_t cf, void *aux) 171 { 172 struct mbmem_attach_args *mbma = aux; 173 bus_space_handle_t bh; 174 bool matched; 175 176 /* No default Multibus address. */ 177 if (mbma->mbma_paddr == -1) 178 return 0; 179 180 /* Make sure there is something there... */ 181 if (bus_space_map(mbma->mbma_bustag, mbma->mbma_paddr, ECREG_BANK_SZ, 182 0, &bh)) 183 return 0; 184 matched = (bus_space_peek_2(mbma->mbma_bustag, bh, 0, NULL) == 0); 185 bus_space_unmap(mbma->mbma_bustag, bh, ECREG_BANK_SZ); 186 if (!matched) 187 return 0; 188 189 /* Default interrupt priority. */ 190 if (mbma->mbma_pri == -1) 191 mbma->mbma_pri = 3; 192 193 return 1; 194 } 195 196 void 197 ec_attach(device_t parent, device_t self, void *aux) 198 { 199 struct ec_softc *sc = device_private(self); 200 struct mbmem_attach_args *mbma = aux; 201 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 202 uint8_t myaddr[ETHER_ADDR_LEN]; 203 204 sc->sc_dev = self; 205 206 aprint_normal("\n"); 207 208 /* Map in the board control regs. */ 209 sc->sc_iot = mbma->mbma_bustag; 210 if (bus_space_map(mbma->mbma_bustag, mbma->mbma_paddr, ECREG_BANK_SZ, 211 0, &sc->sc_ioh)) 212 panic("%s: can't map regs", __func__); 213 214 /* Reset the board. */ 215 ECREG_CSR_WR(EC_CSR_RESET); 216 delay(160); 217 218 /* 219 * Copy out the board ROM Ethernet address, 220 * and use the non-vendor-ID part to seed 221 * our backoff pseudorandom number generator. 222 */ 223 bus_space_read_region_1(sc->sc_iot, sc->sc_ioh, 224 ECREG_AROM, myaddr, ETHER_ADDR_LEN); 225 sc->sc_backoff_seed = 226 (myaddr[3] << 16) | (myaddr[4] << 8) | (myaddr[5]) | 1; 227 228 /* Initialize ifnet structure. */ 229 strcpy(ifp->if_xname, device_xname(self)); 230 ifp->if_softc = sc; 231 ifp->if_start = ec_start; 232 ifp->if_ioctl = ec_ioctl; 233 ifp->if_init = ec_init; 234 ifp->if_watchdog = ec_watchdog; 235 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS; 236 IFQ_SET_READY(&ifp->if_snd); 237 238 /* Initialize ifmedia structures. */ 239 ifmedia_init(&sc->sc_media, 0, ec_mediachange, ec_mediastatus); 240 ifmedia_add(&sc->sc_media, IFM_ETHER|IFM_MANUAL, 0, NULL); 241 ifmedia_set(&sc->sc_media, IFM_ETHER|IFM_MANUAL); 242 243 /* Now we can attach the interface. */ 244 if_attach(ifp); 245 idprom_etheraddr(myaddr); 246 ether_ifattach(ifp, myaddr); 247 aprint_normal_dev(self, "address %s\n", ether_sprintf(myaddr)); 248 249 bus_intr_establish(mbma->mbma_bustag, mbma->mbma_pri, IPL_NET, 0, 250 ec_intr, sc); 251 252 #if NRND > 0 253 rnd_attach_source(&sc->rnd_source, device_xname(self), 254 RND_TYPE_NET, 0); 255 #endif 256 } 257 258 /* 259 * Reset interface. 260 */ 261 void 262 ec_reset(struct ifnet *ifp) 263 { 264 int s; 265 266 s = splnet(); 267 ec_init(ifp); 268 splx(s); 269 } 270 271 272 /* 273 * Initialize interface. 274 */ 275 int 276 ec_init(struct ifnet *ifp) 277 { 278 struct ec_softc *sc = ifp->if_softc; 279 280 /* Reset the board. */ 281 ECREG_CSR_WR(EC_CSR_RESET); 282 delay(160); 283 284 /* Set the Ethernet address. */ 285 bus_space_write_region_1(sc->sc_iot, sc->sc_ioh, 286 ECREG_ARAM, CLLADDR(sc->sc_ethercom.ec_if.if_sadl), ETHER_ADDR_LEN); 287 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_INTPA) | EC_CSR_AMSW); 288 ECREG_CSR_WR(ECREG_CSR_RD & 0); 289 290 /* Enable interrupts. */ 291 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_INTPA) | 292 EC_CSR_BBSW | EC_CSR_ABSW | EC_CSR_BINT | EC_CSR_AINT | 293 (ifp->if_flags & IFF_PROMISC ? EC_CSR_PROMISC : EC_CSR_PA)); 294 295 /* Set flags appropriately. */ 296 ifp->if_flags |= IFF_RUNNING; 297 ifp->if_flags &= ~IFF_OACTIVE; 298 299 /* Start output. */ 300 ec_start(ifp); 301 302 return 0; 303 } 304 305 /* 306 * Start output on interface. 307 */ 308 void 309 ec_start(struct ifnet *ifp) 310 { 311 struct ec_softc *sc = ifp->if_softc; 312 struct mbuf *m, *m0; 313 int s; 314 u_int count, realcount; 315 bus_size_t off; 316 static uint8_t padding[ETHER_MIN_LEN - ETHER_CRC_LEN] = {0}; 317 318 s = splnet(); 319 320 /* Don't do anything if output is active. */ 321 if ((ifp->if_flags & IFF_OACTIVE) != 0) { 322 splx(s); 323 return; 324 } 325 /* Don't do anything if the output queue is empty. */ 326 IFQ_DEQUEUE(&ifp->if_snd, m0); 327 if (m0 == NULL) { 328 splx(s); 329 return; 330 } 331 332 /* The BPF tap. */ 333 bpf_mtap(ifp, m0); 334 335 /* Size the packet. */ 336 count = EC_BUF_SZ - m0->m_pkthdr.len; 337 338 /* Copy the packet into the xmit buffer. */ 339 realcount = MIN(count, EC_PKT_MAXTDOFF); 340 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ECREG_TBUF, realcount); 341 for (off = realcount, m = m0; m != 0; off += m->m_len, m = m->m_next) 342 ec_copyout(sc, mtod(m, uint8_t *), ECREG_TBUF + off, m->m_len); 343 m_freem(m0); 344 if (count - realcount) 345 ec_copyout(sc, padding, ECREG_TBUF + off, count - realcount); 346 347 /* Enable the transmitter. */ 348 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_PA) | 349 EC_CSR_TBSW | EC_CSR_TINT | EC_CSR_JINT); 350 ifp->if_flags |= IFF_OACTIVE; 351 352 /* Done. */ 353 splx(s); 354 } 355 356 /* 357 * Controller interrupt. 358 */ 359 int 360 ec_intr(void *arg) 361 { 362 struct ec_softc *sc = arg; 363 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 364 int recv_first; 365 int recv_second; 366 int retval; 367 struct mbuf *m0; 368 369 retval = 0; 370 371 /* Check for received packet(s). */ 372 recv_first = recv_second = 0; 373 switch (ECREG_CSR_RD & (EC_CSR_BBSW | EC_CSR_ABSW | EC_CSR_RBBA)) { 374 375 case (EC_CSR_BBSW | EC_CSR_ABSW): 376 case (EC_CSR_BBSW | EC_CSR_ABSW | EC_CSR_RBBA): 377 /* Neither buffer is full. Is this a transmit interrupt? 378 * Acknowledge the interrupt ourselves. */ 379 ECREG_CSR_WR(ECREG_CSR_RD & 380 (EC_CSR_TINT | EC_CSR_JINT | EC_CSR_PAMASK)); 381 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_INTPA) | 382 EC_CSR_BINT | EC_CSR_AINT); 383 break; 384 385 case EC_CSR_BBSW: 386 case (EC_CSR_BBSW | EC_CSR_RBBA): 387 /* Only the A buffer is full. */ 388 recv_first = EC_CSR_AINT; 389 break; 390 391 case EC_CSR_ABSW: 392 case (EC_CSR_ABSW | EC_CSR_RBBA): 393 /* Only the B buffer is full. */ 394 recv_first = EC_CSR_BINT; 395 break; 396 397 case 0: 398 /* Both the A buffer and the B buffer are full, and the A 399 * buffer is older than the B buffer. */ 400 recv_first = EC_CSR_AINT; 401 recv_second = EC_CSR_BINT; 402 break; 403 404 case EC_CSR_RBBA: 405 /* Both the A buffer and the B buffer are full, and the B 406 * buffer is older than the A buffer. */ 407 recv_first = EC_CSR_BINT; 408 recv_second = EC_CSR_AINT; 409 break; 410 } 411 412 /* Receive packets. */ 413 if (recv_first) { 414 415 /* Acknowledge the interrupt. */ 416 ECREG_CSR_WR(ECREG_CSR_RD & 417 ((EC_CSR_BINT | EC_CSR_AINT | EC_CSR_TINT | EC_CSR_JINT | 418 EC_CSR_PAMASK) ^ (recv_first | recv_second))); 419 420 /* Receive a packet. */ 421 ec_recv(sc, recv_first); 422 423 /* Receive a packet. */ 424 if (recv_second) 425 ec_recv(sc, recv_second); 426 427 retval++; 428 } 429 /* Check for a transmitted packet. */ 430 if (ifp->if_flags & IFF_OACTIVE) { 431 432 /* If we got a collision. */ 433 if (ECREG_CSR_RD & EC_CSR_JAM) { 434 ECREG_CSR_WR(ECREG_CSR_RD & 435 (EC_CSR_BINT | EC_CSR_AINT | EC_CSR_PAMASK)); 436 sc->sc_ethercom.ec_if.if_collisions++; 437 retval++; 438 ec_coll(sc); 439 440 } 441 /* If we transmitted a packet. */ 442 else if ((ECREG_CSR_RD & EC_CSR_TBSW) == 0) { 443 ECREG_CSR_WR(ECREG_CSR_RD & 444 (EC_CSR_BINT | EC_CSR_AINT | EC_CSR_PAMASK)); 445 retval++; 446 sc->sc_ethercom.ec_if.if_opackets++; 447 sc->sc_jammed = 0; 448 ifp->if_flags &= ~IFF_OACTIVE; 449 IFQ_POLL(&ifp->if_snd, m0); 450 if (m0 != NULL) 451 ec_start(ifp); 452 } 453 } else { 454 455 /* Make sure we disable transmitter interrupts. */ 456 ECREG_CSR_WR(ECREG_CSR_RD & 457 (EC_CSR_BINT | EC_CSR_AINT | EC_CSR_PAMASK)); 458 } 459 460 return retval; 461 } 462 463 /* 464 * Read in a packet from the board. 465 */ 466 void 467 ec_recv(struct ec_softc *sc, int intbit) 468 { 469 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 470 struct mbuf *m0, *m, *newm; 471 bus_size_t buf; 472 uint16_t status; 473 uint16_t doff; 474 int length, total_length; 475 476 buf = EC_CSR_INT_BUF(intbit); 477 478 /* Read in the packet status. */ 479 status = bus_space_read_2(sc->sc_iot, sc->sc_ioh, buf); 480 doff = status & EC_PKT_DOFF; 481 482 for (total_length = -1, m0 = NULL;;) { 483 484 /* Check for an error. */ 485 if (status & (EC_PKT_FCSERR | EC_PKT_RGERR | EC_PKT_FRERR) || 486 doff < EC_PKT_MINRDOFF || 487 doff > EC_PKT_MAXRDOFF) { 488 printf("%s: garbled packet, status 0x%04x; dropping\n", 489 device_xname(sc->sc_dev), (unsigned int)status); 490 break; 491 } 492 493 /* Adjust for the header. */ 494 total_length = doff - EC_PKT_RDOFF; 495 buf += EC_PKT_RDOFF; 496 497 /* XXX - sometimes the card reports a large data offset. */ 498 if (total_length > (ETHER_MAX_LEN - ETHER_CRC_LEN)) { 499 #ifdef DEBUG 500 printf("%s: fixing too-large length of %d\n", 501 device_xname(sc->sc_dev), total_length); 502 #endif 503 total_length = (ETHER_MAX_LEN - ETHER_CRC_LEN); 504 } 505 506 MGETHDR(m0, M_DONTWAIT, MT_DATA); 507 if (m0 == NULL) 508 break; 509 m0->m_pkthdr.rcvif = ifp; 510 m0->m_pkthdr.len = total_length; 511 length = MHLEN; 512 m = m0; 513 514 while (total_length > 0) { 515 if (total_length >= MINCLSIZE) { 516 MCLGET(m, M_DONTWAIT); 517 if ((m->m_flags & M_EXT) == 0) 518 break; 519 length = MCLBYTES; 520 } 521 m->m_len = length = min(total_length, length); 522 ec_copyin(sc, mtod(m, uint8_t *), buf, length); 523 total_length -= length; 524 buf += length; 525 526 if (total_length > 0) { 527 MGET(newm, M_DONTWAIT, MT_DATA); 528 if (newm == NULL) 529 break; 530 length = MLEN; 531 m = m->m_next = newm; 532 } 533 } 534 break; 535 } 536 537 if (total_length == 0) { 538 ifp->if_ipackets++; 539 540 /* 541 * Check if there's a BPF listener on this interface. 542 * If so, hand off the raw packet to BPF. 543 */ 544 bpf_mtap(ifp, m0); 545 546 /* Pass the packet up. */ 547 (*ifp->if_input)(ifp, m0); 548 549 } else { 550 /* Something went wrong. */ 551 if (m0 != NULL) 552 m_freem(m0); 553 ifp->if_ierrors++; 554 } 555 556 /* Give the receive buffer back to the card. */ 557 buf = EC_CSR_INT_BUF(intbit); 558 bus_space_write_2(sc->sc_iot, sc->sc_ioh, buf, 0); 559 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_INTPA) | 560 EC_CSR_INT_BSW(intbit) | intbit); 561 } 562 563 int 564 ec_mediachange(struct ifnet *ifp) 565 { 566 567 return 0; 568 } 569 570 void 571 ec_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 572 { 573 574 if ((ifp->if_flags & IFF_UP) == 0) 575 return; 576 577 ifmr->ifm_status = IFM_AVALID | IFM_ACTIVE; 578 } 579 580 /* 581 * Process an ioctl request. This code needs some work - it looks pretty ugly. 582 */ 583 int 584 ec_ioctl(struct ifnet *ifp, u_long cmd, void *data) 585 { 586 struct ifaddr *ifa = (struct ifaddr *)data; 587 struct ifreq *ifr = (struct ifreq *)data; 588 struct ec_softc *sc = ifp->if_softc; 589 int s, error = 0; 590 591 s = splnet(); 592 593 switch (cmd) { 594 595 case SIOCINITIFADDR: 596 ifp->if_flags |= IFF_UP; 597 598 switch (ifa->ifa_addr->sa_family) { 599 #ifdef INET 600 case AF_INET: 601 ec_init(ifp); 602 arp_ifinit(ifp, ifa); 603 break; 604 #endif 605 default: 606 ec_init(ifp); 607 break; 608 } 609 break; 610 611 case SIOCSIFFLAGS: 612 if ((error = ifioctl_common(ifp, cmd, data)) != 0) 613 break; 614 switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) { 615 case IFF_RUNNING: 616 /* 617 * If interface is marked down and it is running, then 618 * stop it. 619 */ 620 ifp->if_flags &= ~IFF_RUNNING; 621 break; 622 case IFF_UP: 623 /* 624 * If interface is marked up and it is stopped, then 625 * start it. 626 */ 627 ec_init(ifp); 628 break; 629 default: 630 /* 631 * Some other important flag might have changed, so 632 * reset. 633 */ 634 ec_reset(ifp); 635 break; 636 } 637 break; 638 639 case SIOCGIFMEDIA: 640 case SIOCSIFMEDIA: 641 error = ifmedia_ioctl(ifp, ifr, &sc->sc_media, cmd); 642 break; 643 644 default: 645 error = ether_ioctl(ifp, cmd, data); 646 break; 647 } 648 649 splx(s); 650 return error; 651 } 652 653 /* 654 * Collision routine. 655 */ 656 void 657 ec_coll(struct ec_softc *sc) 658 { 659 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 660 u_short jams; 661 struct mbuf *m0; 662 663 if ((++sc->sc_colliding) >= EC_COLLISIONS_JAMMED) { 664 sc->sc_ethercom.ec_if.if_oerrors++; 665 if (!sc->sc_jammed) 666 printf("%s: ethernet jammed\n", 667 device_xname(sc->sc_dev)); 668 sc->sc_jammed = 1; 669 sc->sc_colliding = 0; 670 ifp->if_flags &= ~IFF_OACTIVE; 671 IFQ_POLL(&ifp->if_snd, m0); 672 if (m0 != NULL) 673 ec_start(ifp); 674 } else { 675 jams = MAX(sc->sc_colliding, EC_BACKOFF_PRNG_COLL_MAX); 676 sc->sc_backoff_seed = 677 ((sc->sc_backoff_seed * EC_BACKOFF_PRNG_MUL) + 678 EC_BACKOFF_PRNG_ADD) & EC_BACKOFF_PRNG_MASK; 679 bus_space_write_2(sc->sc_iot, sc->sc_ioh, ECREG_BACKOFF, 680 -(((sc->sc_backoff_seed >> 8) & ~(-1 << jams)) + 1)); 681 ECREG_CSR_WR((ECREG_CSR_RD & EC_CSR_INTPA) | 682 EC_CSR_JAM | EC_CSR_TINT | EC_CSR_JINT); 683 } 684 } 685 686 /* 687 * Device timeout routine. 688 */ 689 void 690 ec_watchdog(struct ifnet *ifp) 691 { 692 struct ec_softc *sc = ifp->if_softc; 693 694 log(LOG_ERR, "%s: device timeout\n", device_xname(sc->sc_dev)); 695 sc->sc_ethercom.ec_if.if_oerrors++; 696 697 ec_reset(ifp); 698 } 699
Indexes created Tue Sep 30 11:09:46 GMT 2025