DISKLESS revision 1.13 1 # $NetBSD: DISKLESS,v 1.13 1996/08/26 23:41:03 mrg Exp $
2
3 #
4 # DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
5 # Root and swap on NFS (no choice)
6 # Includes devices needed to run as an X-terminal
7 #
8
9 include "std.sun3"
10
11 # Machines to be supported by this kernel
12 options FPU_EMULATE
13 options HAVECACHE # Sun3/260 VAC
14
15 # Needs to be set per system. i.e change these as you see fit
16 maxusers 4
17
18 # Standard system options
19 options SWAPPAGER, VNODEPAGER, DEVPAGER # paging
20 options KTRACE # system call tracing support
21 #makeoptions DEBUG="-g" # symbols for kgdb + nm
22 #options DDB
23
24 # Filesystem options
25 options NFSCLIENT # nfs client support
26 #
27 options FDESC # /dev/fd/*
28 options FIFO # FIFOs; RECOMMENDED
29 options KERNFS # /kern
30 options NULLFS # loopback file system
31 #options PROCFS # /proc
32 #options UNION # union file system
33
34 # Networking options
35 options INET # IP prototol stack support
36 # XXX - Work-around for root on slow SunOS/Sun3 servers (sigh...)
37 options NFS_BOOT_RWSIZE=1024
38
39 # Compatability options
40 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
41 #options COMPAT_09 # NetBSD 0.9,
42 options COMPAT_10 # NetBSD 1.0,
43 options COMPAT_11 # NetBSD 1.1,
44 options COMPAT_12 # NetBSD 1.2,
45 options COMPAT_43 # and 4.3BSD
46 options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
47 options UCONSOLE # Allow non-root TIOCCONS
48
49 # Sun3-specific debugging options
50 #options PMAP_DEBUG
51 #options VMFAULT_TRACE
52 #options SYSCALL_DEBUG
53 #options EXEC_DEBUG
54 #options DIAGNOSTIC
55
56 config netbsd root on nfs swap on nfs
57
58 #
59 # Serial ports
60 #
61 zstty0 at zsc1 channel 0 # ttya
62 zstty1 at zsc1 channel 1 # ttyb
63
64 kbd0 at zsc0 channel 0 # keyboard
65 ms0 at zsc0 channel 1 # mouse
66
67 #
68 # Network devices
69 #
70
71 # Intel Ethernet (onboard, or VME)
72 ie0 at obio0 addr ? level ?
73 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
74
75 # Lance Ethernet (only onboard)
76 le0 at obio0 addr ? level ?
77
78 #
79 # Frame buffer devices
80 #
81
82 # The default cgfour address depends on the machine:
83 # 3/60: obmem 0xFF200000 .. 0xFF9fffff
84 # 3/110: different? (not tested)
85 cgfour0 at obmem0 addr ?
86
87 # 3/60 P4 accelerated 8-bit color frame buffer
88 # cgsix0 at obmem0 addr ?
89
90 # 3/60 P4 24-bit color frame buffer
91 # cgeight0 at obmem0 addr ?
92
93 # The default bwtwo address depends on the machine:
94 # 3/50: obmem 0x100000
95 # else: obmem 0xff000000
96 bwtwo0 at obmem0 addr ?
97 # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
98 #bwtwo1 at obmem0 addr 0xff300000
99 # 3/60 plug-in color frame buffer overlay plane
100 #bwtwo1 at obmem0 addr 0xff400000
101
102 # Sun-3 color board, or CG5 8-bit VME frame buffer.
103 cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
104
105 # Support for the CG9 24-bit VME frame buffer.
106 # cgnine0 at vmel0 addr 0x08000000
107
108 # Misc.
109 pseudo-device loop 1 # network loopback
110 #pseudo-device bpfilter 8 # packet filter
111 #pseudo-device sl 2 # CSLIP
112 #pseudo-device ppp 2 # PPP
113 #pseudo-device tun 2 # network tunneling over tty
114
115 pseudo-device pty 32 # pseudo-terminals
116 #pseudo-device vnd 4 # paging to files
117