DISKLESS revision 1.25 1 # $NetBSD: DISKLESS,v 1.25 1998/02/05 04:56:24 gwr Exp $
2
3 # DISKLESS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
4 # Root and swap on NFS
5 # Includes devices needed to run as an X-terminal
6
7 include "arch/sun3/conf/std.sun3"
8
9 # Machines to be supported by this kernel. Note:
10 # The SUN3 and SUN3X options are mutually exclusive!
11 # (Your kernel will only run on one or the other.)
12 makeoptions MACHTYPE=sun3
13 options _SUN3_
14
15 options FPU_EMULATE
16 options HAVECACHE # Sun3/260 VAC
17
18 # Needs to be set per system. i.e change these as you see fit
19 maxusers 2
20
21 # Standard system options
22 options KTRACE # system call tracing
23 options SYSVMSG # System V message queues
24 options SYSVSEM # System V semaphores
25 options SYSVSHM # System V shared memory
26 #options SHMMAXPGS=1024 # 1024 pages is the default
27 #options LKM # loadable kernel modules
28 #options INSECURE # disable kernel security level
29 #options UCONSOLE # Allow non-root TIOCCONS
30
31 # Which kernel debugger? Uncomment either this:
32 options DDB
33 # ... or these for KGDB (gdb remote target)
34 #makeoptions DEBUG="-g" # debugging symbols for gdb
35 #options KGDB
36 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
37
38 # Other debugging options
39 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
40 #options DEBUG # kernel debugging code
41 #options DIAGNOSTIC # extra kernel sanity checking
42 #options KMEMSTATS # kernel memory statistics (vmstat -m)
43 #options PMAP_DEBUG
44
45 # Compatability options
46 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
47 options COMPAT_43 # and 4.3BSD and ...
48 options COMPAT_10 # NetBSD 1.0
49 options COMPAT_11 # NetBSD 1.1
50 options COMPAT_12 # NetBSD 1.2
51 options COMPAT_13 # NetBSD 1.3
52
53 # Filesystem options
54 #file-system FFS # Berkeley Fast Filesystem
55 file-system NFS # Sun NFS client support
56 #file-system CD9660 # ISO 9660 + Rock Ridge file system
57 file-system FDESC # /dev/fd/*
58 file-system KERNFS # /kern
59 file-system NULLFS # loopback file system
60 file-system PROCFS # /proc
61 #file-system UNION # union file system
62 #file-system MFS # memory-based filesystem
63
64 options FIFO # FIFOs; RECOMMENDED
65 #options NFSSERVER # nfs server support
66 #options QUOTA # FFS quotas
67
68 # Networking options
69 options INET # IP prototol stack support
70 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
71 #options GATEWAY # IP packet forwarding
72 #options ISO,TPIP # OSI networking
73 #options EON # OSI tunneling over IP
74 #options CCITT,LLC,HDLC # X.25
75 #options PFIL_HOOKS # pfil(9) packet filter hooks.
76
77 # Work-around for root on slow servers (insurance...)
78 options NFS_BOOT_RWSIZE=1024
79 options NFS_BOOT_BOOTPARAM
80
81 config netbsd root on ? type nfs
82
83 # On-board I/O space (required)
84 include "arch/sun3/conf/obio.sun3"
85
86 # On-board memory (optional)
87 # See frame-buffers
88 obmem0 at mainbus?
89
90 # VME bus support (optional)
91 # One unit for each address space
92 vme0 at mainbus? # A16/D16
93 vme1 at mainbus? # A16/D32
94 vme2 at mainbus? # A24/D16
95 vme3 at mainbus? # A24/D32
96 vme4 at mainbus? # A32/D16
97 vme5 at mainbus? # A32/D32
98
99 #
100 # Serial ports
101 #
102 zstty0 at zsc1 channel 0 # ttya
103 zstty1 at zsc1 channel 1 # ttyb
104
105 kbd0 at zsc0 channel 0 # keyboard
106 ms0 at zsc0 channel 1 # mouse
107
108 #
109 # Network devices
110 #
111
112 # Intel Ethernet (onboard, or VME)
113 ie0 at obio0 addr 0x0C0000 ipl 3
114 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
115
116 # Lance Ethernet (only onboard)
117 le0 at obio0 addr 0x120000 ipl 3
118
119 # All Sun3 machines with an "le" (3/50, 3/60) should be
120 # presumed to have the old, buggy LANCE chip. (Rev. C)
121 options LANCE_REVC_BUG
122
123 # Sun3/E SCSI+Ethernet board (VME A24/D16)
124 # Note: the board uses vect and vect+1
125 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
126 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
127 #si* at sebuf?
128 ie* at sebuf?
129
130 #
131 # Frame buffer devices
132 #
133
134 # The default cgfour address depends on the machine:
135 # 3/60: obmem 0xFF200000 .. 0xFF9fffff
136 # 3/110: different? (not tested)
137 cgfour0 at obmem0 addr ?
138
139 # 3/60 P4 accelerated 8-bit color frame buffer
140 # cgsix0 at obmem0 addr ?
141
142 # 3/60 P4 24-bit color frame buffer
143 # cgeight0 at obmem0 addr ?
144
145 # The default bwtwo address depends on the machine:
146 # 3/50: obmem 0x100000
147 # else: obmem 0xff000000
148 bwtwo0 at obmem0 addr ?
149 # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
150 #bwtwo1 at obmem0 addr 0xff300000
151 # 3/60 plug-in color frame buffer overlay plane
152 #bwtwo1 at obmem0 addr 0xff400000
153
154 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
155 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
156
157 # Support for the CG9 24-bit frame buffer (VME A32/D32).
158 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
159
160 # Misc.
161 pseudo-device loop 1 # network loopback
162 pseudo-device bpfilter 8 # packet filter
163 pseudo-device sl 2 # CSLIP
164 pseudo-device ppp 2 # PPP
165 pseudo-device tun 2 # network tunneling over tty
166 #pseudo-device ipfilter # ip filter
167
168 pseudo-device pty 32 # pseudo-terminals
169