FOUR_TTYS revision 1.11 1 # $NetBSD: FOUR_TTYS,v 1.11 1997/11/17 01:58:29 lukem Exp $
2
3 #
4 # FOUR_TTYS Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
5 # like GENERIC but both zs chips are used as ttys
6 #
7
8 include "arch/sun3/conf/std.sun3"
9
10 # Machines to be supported by this kernel
11 options FPU_EMULATE
12 options HAVECACHE # Sun3/260 VAC
13
14 # Needs to be set per system. i.e change these as you see fit
15 maxusers 4
16
17 # Standard system options
18 options KTRACE # system call tracing support
19
20 # Debugging options. Uncomment either this:
21 options DDB
22 # ... or these for KGDB (gdb remote target)
23 #makeoptions DEBUG="-g" # debugging symbols for gdb
24 #options KGDB
25 #options KGDBDEV=0x0C01
26
27 # Other debugging options
28 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
29
30 # Filesystem options
31 file-system FFS # ufs file system
32 file-system NFS # nfs client support
33 file-system CD9660 # ISO 9660 + Rock Ridge file system
34 file-system FDESC # /dev/fd/*
35 file-system KERNFS # /kern
36 file-system NULLFS # loopback file system
37 file-system PROCFS # /proc
38 file-system UNION # union file system
39 file-system MFS # memory-based filesystem
40
41 options NFSSERVER # nfs server support
42 options FIFO # FIFOs; RECOMMENDED
43
44 # Networking options
45 options INET # IP prototol stack support
46 #options GATEWAY # IP packet forwarding
47 options TCP_COMPAT_42 # TCP bug compatibility with 4.2BSD
48 # XXX - Work-around for root on slow servers (insurance...)
49 options NFS_BOOT_RWSIZE=1024
50
51 # Compatability options
52 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
53 options COMPAT_43 # and 4.3BSD and ...
54 options COMPAT_10 # NetBSD 1.0
55 options COMPAT_11 # NetBSD 1.1
56 options COMPAT_12 # NetBSD 1.2
57 options UCONSOLE # Allow non-root TIOCCONS
58
59 # Sun3-specific debugging options
60 #options PMAP_DEBUG
61 #options VMFAULT_TRACE
62 #options SYSCALL_DEBUG
63 #options EXEC_DEBUG
64 options DIAGNOSTIC
65 #options SCSIDEBUG
66
67 config netbsd root on ? type ?
68
69 #
70 # Serial ports
71 #
72 zstty0 at zsc1 channel 0 # ttya
73 zstty1 at zsc1 channel 1 # ttyb
74 #
75 # Note that by ommitting "kdb0" and "ms0" one can build
76 # a kernel that operates four plain serial lines, where
77 # two of them are data-leads-only ports wired up using
78 # a custom cable on the keyboard connector.
79 #
80 zstty2 at zsc0 channel 0 # ttyc
81 zstty3 at zsc0 channel 1 # ttyd
82
83 #
84 # Network devices
85 #
86
87 # Intel Ethernet (onboard, or VME)
88 ie0 at obio0 addr 0x0C0000 level 3
89 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
90
91 # Lance Ethernet (only onboard)
92 le0 at obio0 addr 0x120000 level 3
93
94 #
95 # Disk and tape devices
96 #
97
98 # Sun3 "si" SCSI controller (NCR 5380)
99 si0 at obio0 addr 0x140000 level 2
100 si0 at vmes0 addr 0xff200000 level 2 vect 0x40
101 si1 at vmes0 addr 0xff204000 level 2 vect 0x41
102
103 # Xylogics 450/451 controllers
104 # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
105 # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
106 # Just wire-down the units so bootdev match is easy.
107 # xy0 at xyc0 drive 0
108 # xy1 at xyc0 drive 1
109 # xy2 at xyc1 drive 0
110 # xy3 at xyc1 drive 1
111
112 # Xylogics 7053 controllers
113 # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
114 # xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
115 # Just wire-down the units so bootdev match is easy.
116 # xd0 at xdc0 drive 0
117 # xd1 at xdc0 drive 1
118 # xd2 at xdc1 drive 0
119 # xd3 at xdc1 drive 1
120
121 # Xylogics 472 tape controllers?
122
123 #
124 # Frame buffer devices
125 #
126
127 # The default cgfour address depends on the machine:
128 # 3/60: obmem 0xFF200000 .. 0xFF9fffff
129 # 3/110: different? (not tested)
130 cgfour0 at obmem0 addr ?
131
132 # 3/60 P4 accelerated 8-bit color frame buffer
133 # cgsix0 at obmem0 addr ?
134
135 # 3/60 P4 24-bit color frame buffer
136 # cgeight0 at obmem0 addr ?
137
138 # The default bwtwo address depends on the machine:
139 # 3/50: obmem 0x100000
140 # else: obmem 0xff000000
141 bwtwo0 at obmem0 addr ?
142 # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
143 #bwtwo1 at obmem0 addr 0xff300000
144 # 3/60 plug-in color frame buffer overlay plane
145 #bwtwo1 at obmem0 addr 0xff400000
146
147 # Sun-3 color board, or CG5 8-bit VME frame buffer.
148 cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
149
150 # Support for the CG9 24-bit VME frame buffer.
151 # cgnine0 at vmel0 addr 0x08000000
152
153 #
154 # SCSI infrastructure
155 #
156 scsibus* at scsi?
157
158 sd* at scsibus? target ? lun ? # SCSI disks
159 st* at scsibus? target ? lun ? # SCSI tapes
160 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
161 ch* at scsibus? target ? lun ? # SCSI changer devices
162 ss* at scsibus? target ? lun ? # SCSI scanners
163 uk* at scsibus? target ? lun ? # unknown SCSI devices
164
165 # Memory-disk drivers
166 pseudo-device md 2
167
168 # Misc.
169 pseudo-device loop 1 # network loopback
170 pseudo-device bpfilter 8 # packet filter
171 pseudo-device sl 2 # CSLIP
172 pseudo-device ppp 2 # PPP
173 pseudo-device tun 2 # network tunneling over tty
174 #pseudo-device ipfilter # ip filter
175
176 pseudo-device pty 64 # pseudo-terminals
177 #pseudo-device vnd 4 # paging to files
178 #pseudo-device ccd 4 # concatenated disks
179